131,077 used machines on RESALE, but how to find them? Machine Search
Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 rpm - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Foot switch - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg
table diameter:500 mm total power requirement:3 kW weight of the machine ca.:2 t dimensions of the machine ca.:2300 x 1270 x 2200 mm
Folding unit GUK FA 50-2 2nd station; good condition; cleaned and tested; Inlet width 500mm; 2 folded pockets; Self-control. Folding unit GUK FA 50-2 secound unit; good condition; cleaned and checked; working witdh 500mm; two pockets; Automatic control.
M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm
groove width:1,5 , 12, 14 mm total power requirement:380V, 50Hz, 32A, 15 kW weight of the machine ca.:5,6 t dimensions of the machine ca.:4000 x 750 x 1300 mm
Hoehn machine - Cross grinding machine Sunnen ML 3500 (similar to ML5000) complete with external tank with paper filter and magnetic separator The machine is in our warehouse in Gussago BS, energized Test run possible Mimu Machine Tools Italy
bore capacity in steel (diameter): 25 mm throat: 175 mm bore stroke: 50 mm : 16 mm spindle taper: ISO 30 spindle turning speed range: 50 - 3000 U/min : 380 mm : 175 mm table surface area: 700 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,75 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight of the machine ca.:45 kg dimensions of the machine ca.:600 x 330 x 270 m
saw blade diameter:400 mm total power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m
total power requirement:16,5 kW weight of the machine ca.:3,8 t
total power requirement:380V, 50Hz, 7,9A kW weight of the machine ca.:1 t dimensions of the machine ca.:4 x 3 m
We offer you an add-on snow blower (two-way) from the company Schmidt. - Model VF-Z-55-1-004 - fully functional - Year of construction: 2001 - Total mass 1540 kg - Voltage 24 V - Working area roadways (road and rail (standard gauge: 1435 mm) - Room width 2.40 m - Ejection width 41 cm - Drive via PTO shaft front - suitable for Unimog / road-rail Unimog If you have any further questions, please feel free to contact us or visit us Errors and information Errors excepted! No guarantee or warranty. Prior sale and errors excepted. ANB Handel & Service Inh. M. Schönau Halbmondsweg 399885 Ohrdruf
bore capacity in steel (diameter): 30 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 565 mm : 220 mm table surface area: 840 x 210 mm connected load frequency: 400 V max. distance between table and spindle-nose: max. 470 mm total power requirement: 1,1 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HM501, 3-fold head stitch 70. New Beckhoff PLC (Retrofit 2021)
Cavecchi Pulitrice F Cheese cleaning machine Serial: 51 2004, cheese cleaning machine, side and bottom brushes, 3Ph
grinding length:600 mm grinding width:200 mm total power requirement:5 kW weight of the machine ca.:1,4 t dimensions of the machine ca.:3 x 3 m
grinding diameter:4000 mm centre height:310 mm weight of the machine ca.:17 t dimensions of the machine ca.:10.5 x 3.6 x 1,9 m
grinding diameter:3 - 150 mm grinding length:200 mm total power requirement:380V, 50Hz, 30 kW dimensions of the machine ca.:5 x 3 x 2,5 m
grinding diameter: 0,2 - 190 mm grinding length:400 mm centre height:100 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:2 x 1,5 x 1,8 m
table width:2300 mm table length:7000 mm burner heads:1 Plasma -Schneidk. burner heads:2 autogene Schneidköpfe control:NBS 400 Documents:vorhanden
air pressure:8 bar Air consumption:NI 18 l/min. weight:110 kg dimensions of the machine ca.:700 x 300 x 1000 mm
Shrink Wrap, Front shuttle feeder, Rotary side feeder, Friction feeder, Shrink tunnel, Maximum Speed: 85 cycles per minute, Length: 85 to 395 mm, Width: 85 to 300 mm, Height: 2 to 70 mm
Speed: 230 m/min, Full Automatic Adjustment Control, Touch & Work Technology, Memory Storage for Folding Programs, Flate Pile Feeder, 4 Pockets, 1 Knife, Anti Noise Hood, Delivery Conveyor, Standard Accessories
Automatic Feeder & Delivery, Max. Speed: 45,7m/min, Min Size: 21,6x28cm, Max Size: 76,2x101,6cm, Feeder Capacity: 880 KG
Article: profile turning trip dog Manufacturer: Schütte Many different sizes for Schütte profile turning attachment 68AE Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
pickoff with shaft for Schutte multi spindle automatic lathe SF67, used pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: draw bar Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: quadrant lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: feed lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: push rod Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Brand BENDMAK Type CYL-ST-170-20-5,0 Working lenght 2100 mm Pre-Bending 5 mm Max Thickness 5 mm Top Roll 170 mm Min Bending 255 mm Motor Power 4 kW Bending Speed 4,8 m/min. Dimensions L x W x H 4000 x 1100 x 1130 mm Weight 2300 kg Year 2015 Extra information Cone Bending device Induction hardened rolls Motorized Up and Down movement of the Back Roll Digital readout for Displaying positions of the Back Roll 2 Separte Control Units Cast Iron Body
Article: push lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Erodiermaschine, gebraucht Baujahr: 1989 Bitte kontaktieren Sie uns für weitere Informationen und Bilder über mail(at)tar-mc.com oder www.tar-mc.com
HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder
Machine Details Stock number 1105-03737 Machine type machining center - Universal Brand DMG DECKEL MAHO Type DMU 80 MONOBLOCK Year of construction 2006 Control type CNC Control MILLPLUS HEIDENHAIN Storage location FRANCE Country of origin Germany Delivery time immediately Freight Base EX WORK Technical details x-travel 980 mm y-travel 630 mm z-travel 610 mm Speed 12000 1/min Control MILLPLUS HEIDENHAIN Tool holder SK 40 Tool changing device 32 items. Spindle 28 / 19 kW Table load 650 kg Total power requirement 44 kVA Machine weight ca. 9 t Information 5-axis, simultaneous universal machining centre HEIDENHAIN MILL PLUS Table 1250 x 700 mm, integrated rotary table 700mm, controlled NC swivel milling head (B-axis) -30° / +91°, Electr. Handwheel Conveyor IKZ 20 BARS WITH NEW SPINDLE TIME MAERTZ 2022
I sell the Flader Orbitalbuerstmaschine. Model Quickwood Fladder System Working width 1060mm. Mechanically adjustable rotazion and feed speed. Cheap for rustic bushes and patina surfaces. Profiles possible. Made in Denmark Hansen - Hundebol AS
Overview of equipment: - Workpiece support scissor design with roller support, 1000 mm extendable - Infeed ruler automatically adjustable - Fixed stop side left - Inlet interlock pneumatically controlled - Upper pressure via driven composite V-belt - Height adjustment electric - Workpiece transport device via transport chain with rubber support - Release agent spray unit top/bottom - Joint milling unit 2 x 3 kW - Gluing part A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick clamping system, 2-roll magazine, pressure zone C (auto-adjustable, with 1 pre-press roll and 6 repress rollers) - Cross-cut unit HL84 0.8 kW, with autom. Adjustment chamfer/straight as well as pneum. Adjustment flush/protrusion caps - Pre-milling unit 1.5 kW, pneum. Adjustment of bündi/protrusion milling machines - Mould milling unit FK11 with autom. Adjustme ...
Article: Rotary transfer machine Manufacturer: Pfiffner Type: Hydromat HB-32/45 Yob: 2002 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
SPECIFICATIONS: Length of work table mm: 2700 Width of work table mm: 500
Specifications: Model: RNR 20-600 Machine No.: 8266 Item no.: 511061 Year of construction: 2021 Working range: Radius 1800mm RPM speed: 600+170 (with intermediate gear) Torque in Nm: 19/67 Recording: Gr. 2 Ø 31 Capacity St.40: M3-M20 Air consumption approx.: 650 l/min Required air pressure: 7kgr/cm2 Standard - Pneumatic motor (pot make: Ingersoll-Rand) - Engine lubrication - Pressure reducing valve and moisture separator - Quick-change mount for e.g. Bilz thread holders - Flange for mounting on the table - Microspray system for thread cutting (integrated in the machine head) Accessories: - 1x 2-1 reduction - Thread cutting holder with slip clutch for the following threads: 1 / Ø 19 2/ Ø 31 M4 Ø 2.8 ■ 2.1 M8 Ø 6 ■ 4.9 M5 Ø 3.5 ■ 2.7 M10 Ø 7 ■ 5.5 M6 Ø 4.5 ■ 3.4 M12 Ø 9 ■ 7 M14 Ø 11 ■ 9 M16 Ø 12 ■ 9 M18 Ø 14 ■ 11 M20 ...
Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of construction: 2007 Control: MC 4 Clamping unit: Clamping force: 650 t Opening distance: 1150 mm Tool installation height min.: 600 mm plate spacing : 1750 mm Tie bar distance (h x v): 1100 x 900 mm Panel dimensions (h x v): 1510 x 1370 mm Centering (nozzle ejector plate): 200 / 200 mm 1.Injection unit: Screw diameter : 80 mm Injection weight in hp. Max. : 1400 g Displacement: 1543 cc Injection pressure: 2205 bar 2. Injection unit: Screw diameter: 45 mm Injection weight in polystyrene: 278 g Displacement: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x Air valve 16-fold cascade 3 x core pull on BWAP 3 x core pull on FWAP 20 x hot runner control units Robot interface: Euromap 67 Metrics: Total weight: 34,500 kg Total size L x W x H: 7.8 x 2.5 x 2.5 m Operating hours: 45400 h ...
material width:380 mm coil weight:1,0 t material thickness:2,5 mm coil external diameter:1000 mm no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:2 diameter of draw-in rolls:90 mm weight:0,8 t Dimensions (WxDxH):0,8 x 1,3 x 1,7 m
maximum number of results exceeded
please refine your search
