filling lines used for sale

Tetra Pak Tetra Therm Aseptic Visco Line for pasteurisation / sterilization of concentrated beverage bases by a Tubular Heat Exchanger (THE) system. Capacity 2.600 up to 8.150 liter per hour. At the current plant the line is used for products up to 100 °C. The indirect heating temperature is up to a maximum of 135 °C. Holding time set at 0 / 5 / 10 seconds. CIP Cleanable., In the Tetra Therm Aseptic Visco system, heating and cooling will take place in Tetra Spiraflo MTC tubular heat exchangers. Modules with a narrow ring section are used for heating and cooling to ensure optimal heat transfer. The product is pre-heated in stages within the Spiraflo tubular heat exchangers. The Spiraflo tubular heat exchanger is equipped with a sliding O-ring system. This means that the product and the outer tubes are not welded together. This prevents stress corrosion cracking and minimizes maintenance ...

The Waukesha Cherry-Burrell 015 is a rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,054 liter per revolution. Maximum nominal capacity: 2,0 m3/h. Inlet / Outlet connection: 1-1/2. Maximum product pressure: 13,8 bar. Maximum pump speed: 700 rpm. The pump is used in a ice cream factory for product pumping. The current motor with this pump is 0,75 kW - 1,395 rpm - 380/420 ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Complete falling film vacuum evaporator, previously used for skimmed milk or sweetened whole milk, consisting of a 4 effect TVR Evaporator. Still mounted in the cheese plant in Spain till end of April 2026. The product feed rates in the installation are ± 14 t/h with a comparative temperature between 73 and 50°C from the 1st to the 4th effect., Processing rates used by the current plant for skimmed milk:, - Infeed flow: 14.000 kg/h @ 9% DM, - Infeed temperature: 5 °C, - Water Evaporation: 11.375 kg/h, - Outfeed flow: 2.625 kg/h @ 48% DM, - Steam consumption: 2.050 kg/h, Processing rates used by the current plant for sweetened whole milk:, - Infeed flow: 14.000 kg/h @ 25% DM, - Infeed temperature: 5 °C, - Water Evaporation: 7.637 kg/h, - Outfeed flow: 6.363 kg/h @ 55% DM, - Steam consumption: 1.375 kg/h, Approximately operating temperatures:, - First effect (steam side): 73 °C, - Fir ...

, from the manufacturer (built in 2002) are available for sale, each with a . , totaling approx. 3,534 hl. The tanks are insulated, clad and have three frame cooling zones and cone cooling for precise temperature control. Each tank is designed for a maximum overpressure of 2 bar and can be used at operating temperatures of -10 to 50 °C. The total cooling area is 13.3 m². With a robust stainless steel construction and upright positioning, the tanks are ideal for breweries or beverage manufacturers that require temperature-controlled fermentation and storage processes. Individual sale possible. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable stainless steel tanks, Gross volume: 58890 l, Max. overpressure: 2 bar, Operating temperature: -10 to 50 °C, Total cooling area: 13,3 m², Length: 3370 mm, Width: 3370 mm, Height:  ...

Lot concerns container including approximately 2500 meters of ship mooring lines Auction-ID: A1-40134-337

2018 Dr. Collin ZK 16 Twin-Screw Lab/Pilot Polymer Extrusion Line Overview Excellent opportunity to acquire a complete, high-quality laboratory/pilot extrusion line manufactured by Dr. Collin GmbH, an industry leader in R&D and polymer processing equipment. Built in 2018, this co-rotating twin-screw extrusion line (ZK 16 model) is specifically designed for processing plastic materials in small batches, making it ideal for research and development, testing, compounding, and new formulation development. Key Technical Specifications Manufacturer: Dr. Collin GmbH – Lab & Pilot Solutions Model: ZK 16 (Twin-Screw Extruder) Year of Manufacture: 2018 Condition: Used (Dismantled and ready for transport) Screw Diameter: ~16 mm (Co-rotating twin-screw) Power: 8 kW Voltage/Current: 400 V + N + PE / 15 A / 3~ 50 Hz Operating Pressures: Water: 4 bar / Compressed Air: 4 ...

IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed: B ...

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

2 x 7.5m prepreg manufacture impregnation lines, working width 1300mm, speed 3-30m/min, total steam room 13.8m³, maximum drier temperature 200°C, solvent volume maximum 151Kg/hr, solvent type Acetone MEK - MCS, Thermal oil 280°C heating media each with Abus 500 Kg pillar jib crane, with Abus electric chain hoist and lifting frame and a Abus 1 Tonne pillar jib crane, with Abus electric chain hoist and lifting frame, Santex twin position unwind stand, year 2006, Santex twin position unwind stand, year 2006, ISRA Vison automated camera inspection system with four cameras, year 2010, combined steel framework fabricated over the five story steel mezzanine tower, associated PLC controls, cabinets and power distribution and Siemens Simak touch screen controls, including located outside 1 x Envirotech type EVR160_GV combustion chamber, gas burner type EKB-FS, 16,000 M³N/h, 150°C with exhaus ...

Handtmann VF 50 vacuum filling machine for filling, portioning, linking, MC-control, filling capacity up to 2,600 kg/h, pressure up to 55 bar, 420 port./min, portioning from 5-100.000 g., with linking device. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Vacuum filler Robby, filling, portioning, linking, pc control. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Producer: Alpina Description: -Hopper capacity: 60l -Paddle rotor (teflon paddles) -Twister -Efficiency approx 300kg/h

Vacuum filling machine Frey Konti A 50, filling, portioning, linking, max. 2300 kg/h, filling pressure max. 30 bar, portioning speed max. 300 port./min, all stainless steel, CAN control, impulse control for clipping machine, filling pipes with different caliber. The machine is currently in the refurbishing and can be tested in our facility in Koblenz, Germany.

Handtmann VF 616, year of manufacture 2006, vacuum filling machine for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar. The machine is immediately available and can be seen in Koblenz, Germany.

Vacuum filling machine Vemag Robby, filling, portioning, linking, pc control. The vacuum filler is currently in the refurbishment and you are very welcome to test the machine in Koblenz, Germany.

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, compact monitor control, linking device, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g. The machine is immediately available and can be tested in Koblenz, Germany.

Frey Heinrich 20 piston filler, 20 liters piston filling machine, including filling pipes. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Handtmann VF 616 + PLH 216 sausage unit / hanging unit, consists of vacuum filling machine Handtmann VF 616 for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar, with Handtmann PLH 216 hanging machine. The sausage unit is currently in the refurbishment and can be tested in Koblenz, Germany.

Handtmann VF 610, vacuum filling machine for filling, portioning, linking, compact monitor control, filling capacity up to 3.000 kg/h, pressure up to 35/50 bar, up to 450 port./min. The machine is immediately available and you are very welcome to test the machine in Koblenz, Germany

Handtmann FA 30 Top piston filling machine, piston filler for filling, portioning and linking. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany

Frey F-Line F50 vacuum stuffer, vacuum filling machine for filling, portioning, linking, CAN control, filling capacity up to 2.200 kg/h, filling pressure up to 30 bar. You are very welcome to test the machine in our facility in Koblenz, Germany.

Handtmann hanging line consits of Handtmann VF 100 and PLH 216, vacuum filling machine Handtmann VF 100, vacuum stuffer for filling, portioning, linking, case holding device, PCK control, with loading device, filling performance (variable adjustable) max. 3000 kg/h, filling pressure max. 55 bar, with Handtmann PLH 216 hanging machin.

Handtmann VF 610, vacuum filling machine for filling, portioning, linking, compact monitor control, filling capacity up to 3.000 kg/h, pressure up to 35/50 bar, up to 450 port./min. The machine is immediately available and you are very welcome to test the machine in Koblenz, Germany

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, compact monitor control, linking device, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g. The machine is immediately available and can be tested in Koblenz, Germany.

Vacuum stuffer Handtmann VF 100, vacuum filling machine for filling, portioning, linking, loading device, mc control, body all stainless steel, filling performance 3000 kg/h, pressure up to 55 bar, 420 port./min. You are very welcome to test the machine in Koblenz, Germany.

100L stainless hopper, adjustable fill size on mobile stainless frame

Handtmann VF 620 vacuum filling machine with linking gear box, filling, portioning, linking, monitor control, with loading device for 200 liter standard trollies. You are very welcome to test the machine in our facility in Koblenz, Germany.

Handtmann VF 80/160 vacuum filling machine with loading device, linking device 34-4, vacuum stuffer machine for filling, portioning, linking, mc control, microcomputer control, filling capacity 3.000 kg/h, pressure up to 35 bar, portioning range 5-100,000 g, hopper volume 90/160 liters. You are very welcome to test the machine in our facility in Koblenz, Germany.

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, with servo drive, compact monitor control, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g., with linking device You are very welcome to test the machine in our facility in Koblenz, Germany

Vemag Robot 500 vacuum filling machine / dough portioner, double screw System, for filling, portioning, linking, microcomputer control, filling capacity up to 2,500 kg/h You are very welcome to test the machine in our facility in Koblenz, Germany.

used Handtmann VF 630 vacuum filling machine for filling, portioning, linking, year of construction 2008, with linking device 34-5, for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 10.200 kg/h, pressure up to 40 bar, up to 700 port./min., portioning range from 5-100,000 gram

Handtmann VF 628 vacuum filler with inline grinding system GD 93, filling, portioning, linking, monitor control, filling capacity 6.000 kg/h, pressure up to 72 bar, hopper volume 90/350 liters, arm lifting device, refurbished.

Description Filler Handtmann model VF300 is a computer controlled vacuum filler offering very high performance with innovative technical solutions applied. Model VF300 is ideal for the production of meat products and find it applies in large and small manufacturing plants. The device is a very accurate-allows you to achieve the highest quality of the product. Handtmann applied in your device pneumatic lift mechanism for automatic loading. Specification: Brand: Handtmann Model: VF300 Volume: 300 L Dimensions: 2030 x 1750 x 1400 (mm) Power supply: 400V 50 Hz 3N Power: 6.5 kW

Handtmann VF 50 with attachment FPA

Handtmann VF 616 + PLH 216 hanging line Z-Version”, consisting of vacuum filling machine Handtmann VF 616, with linking device 34-5, for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar, including Handtmann hanging line PLH 216 with casing holding device 216, and hanging unit 241-16 and 216-22, all machines will be refurbished after confirmation of order.

Continuous vacuum filler for straight filling, portioning, and twisting Optional: twisting and holding device All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 70 Length: 90 Height: 165 Delivery time: 20 working days after advanced payment

Very good machine with spare parts worth 3000,00â?¬.

Manufacturer: Handtmann Type: 34-2 Turning gear HANDTMANN 34-2 for Handtmann VF 10 , 12, 16, 18 , 20 Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

Manufacturer: Handtmann Type: 35-1 Turning gear HANDTMANN 35-1 for Handtmann VF 10 , 12, 16, 18 , 20 Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

Type: Robot 500 Continuous vacuum filler for straight filling and portioning Integrated vacuum pump Double screw Standard double screw housing Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 70 Lenght: 80 Height: 155 Delivery time: after advanced payment machine is generally refurbished and ready for delivery

Manufacturer: Handtmann Type: 34-5 Calibration gear type 34-5 Fur Handtmann VF 50, 80, 100, 200, 300 and for all from the series VF 600 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

Type: Vemag Robot HP 15 С Hopper content: 250 L, one-piece Bushing with double screw Steplessly adjustable filling speed: 0 - 100 % Control: РС Portion weight: from 5 up to 60000 g Compatible to work with clips machine Vacuum pump: 20 m3/h Loading device for standard trolleys Machine dimensions in сm: Width: 134,0 Length: 220,0 Height: 200,0 Power: 17,0 kW Voltage: 380 V, 50 Hz Weight: 1300 kg

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.6 KW Machine dimensions in cm: Width: 205 Lenght: 130 Height: 210 Delivery time: 20 working days after advanced payment

Handtmann VF 612 Filling - Portioning - Turning Off Year of construction 2009 Price on request

Handtmann VF 628 Filling - Portioning - Turning Off Year of construction 2009 incl. Wolf GD93-5

Handtmann VF 608 Filling - Portioning - Turning Off Year of construction 2008 Price on request

with feeding Filling - Portioning - Turning Off MC Control Price on request

Handtmann Vacuum Filler Type: VF200 Funnel Capacity: 90\240(liters) Total power: 7kW Filling Capacity: Max 5000kg/h Serving: 5 - 100,000 grams Unscrewing machine Frame loading for 200l trolleys Power Supply: Electric, 400V 50Hz 3N Stainless, acid-resistant steel External dimensions: 1500 mm x 1200 mm x 1900 mm Condition: Used / Device fully functional We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman