filling line krones used for sale

A Stalgast compensation wall hood from the Expert Line series is offered in box form for the professional catering and kitchen sector. The hood is suitable for use above thermal equipment with an increased fire hazard and has an LC2 Type A cyclone and labyrinth filter. The wall hood is made of high-quality stainless steel, fully folded and has a smooth, easy-to-clean surface. There are air vents on the side walls to compensate for exhaust air and supply air in the room. Condensate and grease are collected in an internal, circumferential collection channel and can be hygienically drained via the drain valve on the side. The hood has LED lighting with 230 volts and protection class IP65. According to the information, the exhaust air compartment is completely airtight. The hood complies with the DIN EN 16282-2 standard.Important data at a glance: Manufacturer: Stalgast Series: Expert Lin ...

The GRAM/HOSHIZAKI BÄKO-Line SKS 64 CCG is a plug-in cream climate cabinet for professional use in bakeries, confectioneries and bakery businesses. The device is particularly suitable for sensitive goods such as cream cakes, cream cakes, desserts and confectionery products, which must be reliably cooled and at the same time gently stored. The special circulating air cooling with suction air ducting reduces a direct air flow to the goods. This allows sensitive baked goods to be better protected from drying out or skinning. The temperature range from minus 5 degrees Celsius to plus 12 degrees Celsius can be controlled via the digital temperature display. The robust stainless steel design of the housing and interior is designed for daily commercial use and can be hygienically cleaned. The cabinet is suitable for trays in the format 600 x 400 mm and is supplied with 10 pairs of support ra ...

Complete powder plant existing out of Evaporator (4-effect, TVR), Spray Dryer, Fluidbed Dryer, 2x Crystallization Tanks and a Big Bag Filling Station. Previously used for skim milk / whole milk / whey / permeate or 35% protein powder. Still mounted on its original postion inside the factory in Spain. Line per direct available., Infeed capacities evaporator:, - Skim milk: 7.200 kg/h @ 9% TS., - Whole milk: 4.800 kg/h @ 12,5% TS., - Whey: 8.150 kg/h @ 6% TS., - Permeate: 8.835 kg/h @ 4,5% TS., - 35% Protein: 2.880 kg/h @ 10% TS., - Water for startup and CIP: 10.000 ltr/h @ 2 bar., - Water for cooling seals in vacuum pumps: 7.000 ltr/h @ 25 °C - 2 bar, demineralized., - Water for safety / firefighting should be available at 7.000 ltr/h @ 2 bar., - Water for condenser cooling: 30.000 ltr/h @ 28 °C - 2 bar., - Ice water for flash system: 2.000 ltr/h @ 3 °C - 2 bar., - Saturated dry steam:  ...

The SLC-24180 offers the longest stroke of the SLC-24 series with a travel range of 123 mm. It measures 180 × 24 × 10.5 mm and provides a normal force of 30 N. Kit consisting of: 2 linear motors 1 rotary motor 1 controller + cable Auction-ID: A1-47375-5

System consists of 1 x Honsel type: F13, serial number: 4633, Fischer & Kreck, 1 x built in 1957, type Combi C/11B Production speed of 180 pieces per minute and runs with a voltage of 400 V. Overall dimensions: approx. 1000 x 180 x 214 cm (L/W/H) including 1 x Gluematick type: GHK, 1 x cabinet with contents and accessories Auction-ID: A1-47279-115

1 x Triumph 3 a block bottom bag machine for the production of paper bags Year of manufacture 1980, Type 3 a Material: Paper/composites Format: 140-320 mm with three unfolds: Pre-printed bottom cover sheet, self-adhesive bottom cover sheet, In-line coding printer Overall dimensions: approx. 2000 cm long, 390 x 280 cm (W/H) Including: 1 Demag crane, 1 x workstation is equipped with a height-adjustable table, among other things. Auction-ID: A1-47279-62

Line consists of:, Sugar cube line:, Type: T.T.O.R. 125, Year of construction: 2014, Capacity: 500 kg/hr, Cube size: 10 x 20 mm, Belt width: 295 mm, Drying tunnel: 18000 mm, Cooling tunnel: 4000 mm, Big bag infeed bunker, Capacity: max 1200 kg, Platform height: 1550 mm, Elevating height: 3000 mm, Dimensions: 3100 x 2020 x 4750 mm., Box forming machine, Box size: 210 x 100 mm, Belt width: 100 mm, Dimensions: 1500 x 1400 x 1630 mm, Box closing machine, Belt width: 100 mm, Distance between dividers: 330 mm, Dimensions: 2360 x 700 x 1600 mm

- It consists of: - VOLCAN extruder. - Cooler with water pump, bowl of dimensions 2500 x 600 x 100 mm. - VOLCAN intermediate belt transfer: total length 1600 mm, belt dimensions 800 x 140 mm, maximum workpiece height approx. 120 mm. - Cutting station: maximum cutting length approx. 3300 mm. - 2 drives that had been added have been removed, but the machine still works. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-7

Potato calibration and sorting line consisting of a buffer bunker (trémie), various conveyor belts, calibration section with multiple sorting fractions, distribution module and steel support structure. Suitable for transporting, sorting and calibrating potatoes within a processing or packaging environment. The installation includes: Buffer bunker / storage hopper Various conveyor belts Calibration machine with multiple sorting fractions Distribution and drainage modules Work platform and steel support structure Various electric motors and drives Note: Electric control box/computer not included (if applicable). Visible condition Used condition Normal signs of use Dust and product residues present Operation not tested Dismantling and removal at the expense of the head Auction-ID: A3-43544-34112

NEW in box, never used, Order number: ON17163, Capacity: max 800 pigs/hr., Products: pork carcasses, left & right, Slaughtered weight: 70 - 120 kg, Air pressure: 6 - 8 Bar, 285 Nl/min., Power: 3 x 400V, 50Hz, 45kW, Dimensions: 10000 x 5150 x 2300 mm

VERY GOOD CONDITION STARTS & DRIVE All vehicles offered in this auction are used and may show signs of wear, age, and usage, including but not limited to scratches, dents, mechanical wear, and other imperfections typical for second-hand vehicles. Buyers are strongly encouraged to attend the viewing/inspection before placing a bid, in order to assess the condition of the vehicle. After purchase, we provide assistance with loading of the vehicle. All items are sold as-is, where-is, with no guarantees or warranties. No complaints or claims will be accepted after the purchase is completed. Auction-ID: A7-47288-1125

Production line consisting of 1x 2009 STARRAG HECKERT HEC500 HV (serial number 10367, operating hours 42650 h, spindle hours 19514 h) incl. 1x KNOLL 520 S-1/200 chip conveyor and 1x KNOLL PF 210/1350 belt filter, 1x 2009 STARRAG HECKERT HEC500 H (serial number 10355, operating hours 65385 h, spindle hours 13416 h) incl. 1x KNOLL 520 S-1/200 chip conveyor and 1x KNOLL PF 210/1350 belt filter as well as 1x FASTEMS FPC 1500 pallet linear storage with 20x pallets and 5x clamping towers, Machine weight excl. pallet storage Auction-ID: A1-47475-1

Height 760 mm, mounted on steel beam, travel 7150 mm, incl. REXROTH MS2N07-B1BNN-CMSH1-NNNNE-NN 3-phase motor Auction-ID: A7-47529-24

Height 690 mm, travel 7150 mm, mounted on steel beam Auction-ID: A7-47529-26

Well-functioning Tecnodom double-door refrigerator. Viewing by appointment. Auction-ID: A1-40265-115

Chicken grill with base directly from restaurant. Stainless steel. Not checked for operation. Viewing by appointment. Auction-ID: A1-40265-113

New LINEA HD 5500 Gasoline Generator Type: Portable gasoline generator Manufacturer: Linea HD Model: HD 5500 Fuel type: Gasoline / petrol Rated voltage: 380 V / 220 V Frequency: 50–60 Hz Rated output: 6.0 kW Maximum output: 9.0 kW AC outputs: 220 V sockets and 380 V socket DC output: 12 V / 8.3 A Control panel: Voltmeter, circuit breaker and engine switch Frame type: Portable open-frame generator Condition: Unused / stock item, visual condition as shown This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-47114-22

PROS; -The roof works -Brakes, drives and shifts properly -Battery new Car is stationary for a while, MOT expired Auction-ID: A1-40265-11

Machine Type: Linear Motor Controller / Servo Drive Manufacturer: LinMot Series: PnP Type: C1150-PN-XC-0S-000 Part No.: 0150-2384 Serial No.: 2384.64Z.072 Hardware Version: Ver. 1 Rev. B - P27 Signal Supply: 24 VDC Power Supply: 24–85 VDC Communication: PROFINET (PN) MAC IDs: 00:1A:4E:00:C0:1C / 1D Interfaces: Motor sensor connection, motor power connection, Ethernet ports, control I/O terminals Condition: Used, stored in original box Included Accessories: Original LinMot packaging Remarks: Industrial linear motor controller for LinMot drive systems. Suitable for automation and motion control applications. CE and RoHS compliant. Auction-ID: A7-45993-209

Height 810 mm, mounted on steel beams, travel 4070 mm, incl. REXROTH MS2N07-C1BRN-CMSH1-NNNNE-NN 3-phase motor Auction-ID: A7-47529-28

- Sanding width approx. 1100 mm. - Workpiece thickness from approx. 4 mm to approx. 160 mm. - Variable feed speed. - It consists of:. - VIET VALERIA 3CCC INF. 1100 bottom grading sander: serial number 48051373, groups: grooved steel gauging roller, grooved rubber gauging roller, grooved rubber sanding roller. - VIET S3 331 TM Top Calibrating Sander: serial number SA/003920, 4 groups: grooved steel gauging roller, grooved rubber gauging roller, grooved rubber sanding roller, cleaning brush. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-97

Total force (nominal):800 to Clamping surface (left-right):x mm Clamping surface (front-back):x mm table surface area:3200 X 2200 mm Total force (nominal):2-3-4-5- Presse - 600 to. to table surface area:2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300 Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface an ...

material width:400 mm coil weight:3,0 t material thickness:0,5 - 4,0 mm coil internal diameter:460 - 530 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:50 mm no. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mm material cross-cut:1600 mm² speed of coil line:0 - 20 m/min power requirement:35,0 kW weight:10,5 t dimensions (WxDxH):10,0 x 2,5 x 2,9 m straightening machine:KRE 50.400/9 adjustment of straightening rolls :motoric insertion wedge:hydraulic adjustable decoiler:3000.1 snubber roll:hydraulic expansion:hydraulic sideway adjustment:motoric pivoting:manual roll feed:Servo; WVE 160/400 intermittant lifting:hydraulic

material width:300 mm coil weight:2 x 1,25 t material thickness:0,4 - 1,2 mm coil internal diameter:320 - 420 mm coil external diameter:1300 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 roll diameter:30 mm speed:3 - 30 m/min feed length:0 - 9999,9 mm power requirement:3,0 + 2,5 kW weight of decoiler:0,7 t dimensions decoiler (WxDxH):2,1 x 1,4 x 1,5 mm weight of straightening machine:0,45 t dimensions straightener (WxDxH):1,5 x 0,8 x 1,1 mm weight of the feeder:0,4 t dimensions feeder (WxDxH):1,2 x 0,8 x 1,1 mm universal straightening machine:SC 12-FQ double decoiler:2352 B-FPS expansion:hydraulic lag brake:pneumatic electronic roll feed:WAV-RDS-2Z, Modell 1082 B intermittant lifting:pneumatic control:Siemens S 5

material width:600 mm coil weight:5,0 t material thickness: - 5,0 mm coil internal diameter:360 - 660 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:80 mm number of draw-in rolls:2 material cross-cut:1600 mm² weight of feeeder-straightener:2,5 t weight of decoiler:1,5 t dimensions feeder-straightener (WxDxH):1,7 x 1,7 x 2,6 mm dimensions decoiler (WxDxH):1,8 x 2,0 x 2,3 mm feeder-straightener:VCRL 650, Bj. 1994, GR 2001 height adjustment:motorisch alligator opening:hydraulisch decoiler:SHR 5000, Bj. 2000 expansion:hydraulisch

material width coil line:600 mm coil weight:2 x 3,5 t coil internal diameter:460 - 530 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm no. of straightening rolls:7 no. of rolls at in- and outlet:4 roll diameter:80 mm feed length:0 - 500 mm power requirement:10,0 kW weight:10,0 t dimensions of the coil line:8,8 x 4,0 x 2,55 m straightening machine:Dimeco, 1676 EV double decoiler:2382 FFPS lag brake:pneumatic electronic roll feed:Microfeed

material width:500 mm coil weight:3,0 t material thickness:0,2 - 2,5 mm coil internal diameter:470 - 530 mm coil external diameter:1400 mm no. of straightening rolls:9 straightening roll diameter:40 mm number of inlet and outlet rolls:4 material cross-cut:1200 mm² speed:1,5 - 30 m/min dimensions decoiler (WxDxH):1,9 x 0,6 x 1,7 m weight decoiler:1,1 t dimensions straightener (WxDxH):3,3 x 1,3 x 2,7 m weight straightener:3,0 t straightening machine:RYD 40 x 500 decoiler:DY 500 x 3000 coil lifting device:hydraulic rool feed:elektronic; AESL 500-2,8 threading device:hydraulic expansion:hydraulic

Technical data Manufacturer: ALZMETALL Model: RFT 3/2 Machine Type: In-line drilling machine Machine number: 58812 Year of manufacture: 2018 Drill heads: 2 x AX 3/SV-500 Drilling capacity steel: up to approx. 32 mm (Source: online) Threading: up to M24 (Source: online) Spindle holder: MK3 (Source: online) Stroke: approx. 120 mm (Source: online) Projection: approx. 300 mm (Source: online) Speed control: infinitely variable (Source: online) Configuration 2 drilling spindles 2 x ALZMETALL AX 3/SV-500 drill heads Electronic speed display Height-adjustable drill tops Coolant Setup Common work table Emergency stop switch Operating instructions available

Machine number: 11790001067 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 100 A Connection: 40 kVA Control: SIEMENS SINUMERIK 840 D Spindle speed: 42,000 rpm Feed in X/Y/Z axis: up to 40,000 mm/min Input fineness X/Y/Z axis: 0.001 mm Rapid traverse in X/Y/Z axis: 40 m/min Displacement measuring system Resolution X/Y/Z axis: 0.001 mm Position tolerance in X/Y/Z axis with direct measuring system: 0.005 mm travel X-axis: 200 mm Travel Y-axis: 200 mm Travel Z-axis: 280 mm Tool holder: HSK-32 E incl. 24-fold tool changer Max. tool length from spindle nose: 200 mm Max. tool diameter: 40 mm Max. tool weight with automatic tool change: 1 kg with total tool weight in magazine: 24 kg NC rotary table with swivel axis C-axis Clamping surface: 190 mm diameter Rotation range: 360 ° rotation rotary table: 360 °rotation table: 150 rpm A-axis Swivel range: -5/+130° Loading: max. 10 kg in ...

Overview  This filling line for non-carbonated beverages in PET bottles was manufactured in 2011 and comprises a filtration system, a filling and capping machine, a labeling machine and a pallet wrapping machine. It is designed for bottle sizes from 1.5L to 5L. The line is being sold as the factory has been closed. All machines are professionally stored and can be inspected on site. Technical details  Filtration system | GYM Internacional | 8000 | 2011 Manufacturer: GYM Internacional Model: 8000 Year of manufacture: 2011 Capacity: 8,000 L/h Power consumption: 4 kW Dimensions: 2,500 x 1,500 x 100 mm Weight: 1,110 kg Bacteriological filtration through housing system Automatic filling monoblock | GYM Internacional | Grupo 9-1. PK | 2011 Bottle formats: 1.5L & 5L PET Output: 1,600 bottles/hour (1.5L) 700 bottles/hour (5L) Filling heads: 9 Capping heads: 1 (screw cap) Bottle diameter: Min.  ...

Overview This high-performance can filling line was manufactured in 2013 by KHS and is designed for large-scale beverage production, particularly beer in aluminum cans. With a capacity of up to 48,000 cans per hour (500 ml), the line represents a modern, high-speed solution including depalletizing, filling, seaming, pasteurization, inspection, packaging, and palletizing. The core of the line consists of a KHS Innofill DVD 92 volumetric filler combined with a Ferrum F708G high-performance seamer, ensuring precise filling and reliable closing at maximum output rates. The line has been well maintained and remained in production until February 2026, and is available from Q1 2026. The overall installation features a compact, high-density layout with advanced conveyor and process integration, typical for modern KHS canning lines. Technical Data Capacity: 48,000 cans per hour (500 ml) 41,000 ca ...

Overview This Paxona line distributor for trays was manufactured in 2011 and is designed to divide a single infeed lane into two parallel lanes. The system is typically used in packaging or conveying lines to distribute trays efficiently to downstream machines such as packers, fillers, or palletizing systems. With less than 5,000 operating hours, the unit has seen comparatively low usage and represents a well-preserved solution for line balancing and product distribution. Paxona equipment is known for robust construction and reliable integration into automated production and packaging environments. The distributor is suitable for tray handling applications where a stable and controlled product flow from a single lane to two parallel lanes is required. Technical Data  Manufacturer: Paxona Machine type: Tray line distributor / lane divider Function: Distribution from 1 lane to 2 lanes Yea ...

A Uhlmann blister packaging line in need of repair is available. 1) Uhlmann UPS 4 ETX blister machine, year of manufacture: 2008, design: modular balcony design, modules: 12, blister capacity: 10 tablets, blister format X/Y/Z: 100mm/39mm/5.7mm, packaging output: 220blisters/min, roll width forming/sealing: 256mm/246mm, feed: 102mm, max. forming film roll diameter: 800mm, max. lidding film roll diameter: 300mm, filling section length: 1360mm, theoretical output: 50cycles/min, film width range: 63mm-300mm, punching width range: 28mm-284mm, max. forming depth: 12mm, min. blister dimensions X/Y/Z: 30mm/3.5mm/60mm, max. blister dimensions X/Y/Z: 110mm/12mm/145mm, max. stack height: 85mm, max. blisters per stack: 10, weight: approx. 7000kg. 2) Uhlmann C 2155 cartoner, year of manufacture: 2008, cartoning output: 10-150cartons/min, max. stacking output: 400blisters/min, product carrier height:  ...