filling line for used for sale

Viewing by appointment only Auction-ID: A1-40256-107

For the purpose of cleaning, filling and closing beer bottles; equipped with CIP unit, 12-cup flushing carousel for bottles and cans, 12-cup pressure filler, 1 closing unit, 1x Siemens Simatic touchscreen control panel. Auction-ID: A1-45771-8

A gang drilling machine is offered. Number of spindles: 3, drilling capacity: 8mm, spindle holder: B12/MK1, table clamping surface X/Y: approx. 1050mm/300mm, speed range: 450rpm - 4500rpm, control system: manual. Equipped with quick-action drill chucks, solid cast iron base, emergency stop switch. Weight: approx. 480kg, overall dimensions X/Y/Z: approx. 1200mm/850mm/1700mm. Inspection possible by arrangement.

Benson Self-Leveling Construction Laser - Cross Line Laser with Tripod Features: Self-leveling: +4 degrees /- 4 degrees for high accuracy 3-stage tripod: Flexibility in adjusting the height Laser Class 2: Safe for the eye and extremely accurate Laser range 10 meters: More than enough for most indoor jobs 360 Degree Rotatable Head: Full coverage of the workspace Projects Horizontal and Vertical Lines: Extremely suitable for a multitude of jobs Working time: Up to 10 hours on 2 AA batteries (included) Protection: IP54, suitable for dusty and humid conditions Working temperature: From -10 degrees Celsius to 45 degrees Celsius In a handy storage case: For easy transport and safe storage Adjustable up to 80 cm height and you can also extend it by 32 cm. Keywords: Construction Laser, Self-Leveling Laser, Cross Line Laser, Tripod Construction Laser, Leveling Tools, Measuring Tools, Professiona ...

Height 690 mm, travel 7150 mm, mounted on steel beam Auction-ID: A7-46821-26

Height 760 mm, mounted on steel beam, travel 7150 mm, incl. REXROTH MS2N07-B1BNN-CMSH1-NNNNE-NN 3-phase motor Auction-ID: A7-46821-24

Height 810 mm, mounted on steel beams, travel 4070 mm, incl. REXROTH MS2N07-C1BRN-CMSH1-NNNNE-NN 3-phase motor Auction-ID: A7-46821-28

Insertion of carpets with max width 3000mm - line around the bundling of several rolls of carpet - afterwards plastic is detached from the mobile knife and the ends are melted together via welding bar. Pak rolls further on the machine and goes towards ultrasonic sealer (generator is missing that generates energy - so it was no longer used but can therefore be put back into operation if generator ultrasonic is installed). Suit continues towards clipper machine (in 2 pieces - see photo). Auction-ID: A3-43535-16521

Benson Self-Leveling Construction Laser - Cross Line Laser with Tripod Features: Self-leveling: +4 degrees /- 4 degrees for high accuracy 3-stage tripod: Flexibility in adjusting the height Laser Class 2: Safe for the eye and extremely accurate Laser range 10 meters: More than enough for most indoor jobs 360 Degree Rotatable Head: Full coverage of the workspace Projects Horizontal and Vertical Lines: Extremely suitable for a multitude of jobs Working time: Up to 10 hours on 2 AA batteries (included) Protection: IP54, suitable for dusty and humid conditions Working temperature: From -10 degrees Celsius to 45 degrees Celsius In a handy storage case: For easy transport and safe storage Adjustable up to 80 cm height and you can also extend it by 32 cm. Keywords: Construction Laser, Self-Leveling Laser, Cross Line Laser, Tripod Construction Laser, Leveling Tools, Measuring Tools, Professiona ...

4 overview photos to determine the size of the machine - afterwards photos per floor what happens to the carpet. Starting with the entrance with the pallet truck - here there is a lift in the ground that raises the pallet, a machine operator only has to fold the carpet onto the belt to send to the roll-up machine. Then it is rolled up and pushed to the middle part via hydraulic sliding arm in roll. Once in the middle, you can choose to place the carpet in a plastic packaging with/or without. After packing the roll, we see the end result in the photo (carpets in the end photo purely for illustration purposes and therefore not included, as well as the label printers that are in front of the machine are not included) Machine consists of 2x roll-up line and 1x packaging line. So the first photos are in mirror image the same for roll-up line 2. Auction-ID: A3-43535-16520

Equipped with a lock ring, mounting plate and sturdy plastic case. Application: Connect/mount on a FARO portable measuring arm to quickly collect detailed 3D data from surfaces. It projects a laser line onto an object, which is registered by a camera in order to digitize complex shapes, free shapes and colors (in the Prizm version) extremely accurately in a point cloud. Auction-ID: A1-41997-49

Equipped with a lock ring, mounting plate and sturdy plastic case. Application: Connect/mount on a FARO portable measuring arm to quickly collect detailed 3D data from surfaces. It projects a laser line onto an object, which is registered by a camera in order to digitize complex shapes, free shapes and colors (in the Prizm version) extremely accurately in a point cloud. Auction-ID: A1-41997-52

each provided with compressed air controlled roller conveyor; equipped with 2x 2 sockets; Auction-ID: A1-46651-5

Equipped with: climate control, parrot, cruise control, light + rain sensors, 6-box, roof racks. Auction-ID: A1-42018-179

Overview This can filling line consists of equipment from Krones, KHS, Ferrum, Kisters, Hein, Strema and additional line components. The line is designed for beverage production in cans with a nominal capacity of approximately 60,000 cans per hour. The main filling and closing section includes a KHS Innofill EMD 108S filler and a Ferrum F812 can seamer, both rated at 60,000 cans/hour. The line also includes modern inspection and handling equipment, including a Krones Checkmat from 2023, several Krones machines from 2018, and a Strema A5000BII from 2021.The line covers the core process from can handling and filling through seaming, inspection, pasteurization, packaging and conveying. Several machines have been modernized or upgraded over time, making the line a combination of proven core filling technology and newer inspection, packaging and auxiliary equipment.   Technical Data Capacity ...

Material Name: Shaft sprocket RS160-2-43T - 6 lines x 2 Material Brand: Generic Model: RS160-2-43T Material Type: Duplex Sprocket Material Specification: C45 / SCM415 steel PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11W5 (F49)

Material Name: Gearbox pulley 4 SPB 180mm - 6 lines x 2 Material Brand: Generic Model: 4SPB 180 Material Type: V-belt pulley Material Specification: Cast Iron PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11W5 (F49)

Material Name: Gearbox Motovario IH142 P35042 1:43.05 - 6 linex 2 Material Brand: Motovario Model: IH142 Material Type: Helical gear reducer Material Specification: Cast iron housing + hardened alloy steel gears PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11W5 (F49)

Material Name: Motor pulley 4 SPB 150mm - 6 line x 2pcs Material Brand: Generic Model: 4SPB 180 Material Type: V-belt pulley Material Specification: Cast Iron PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11W5 (F49)

Material Name: Gearbox sprocket RS160-2-20T - 6 lines x 2 Material Brand: Generic Model: RS160-2-20T Material Type: Duplex sprocket Material Specification: C45 / SCM415 steel PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11W5 (F49)

Used NFC juice extraction line. New 2018. Line capacity: 500–700 L/h Suitable for cold-pressing juice from most fruits and vegetables. The line includes: -Belt press made by Stalmont, type: PT 1000 Technical descibtion: The PT-1000 belt press is a device used for pressing apple must. This process takes place between the belt and the press's rollers, which are arranged appropriately. The pressed juice is pumped into the pasteurizer tank. Kebi N Hefglxxemm Helt Technical specifications: Capacity: up to 900 kg of apples/h (approx. 700 l/h) Juice yield from pressed apples up to 75% Installed power: 1 kW 230V Dimensions L x W x H (mm): 2230x1190x1250 Weight: 700 kg Belt width: 500 mm Belt speed: adjustable Juice tank with a sieve (mesh diameter = 1 mm) Juice pump -Grinder, -Crate-pallet maker. Very good condition. Equipment is well-maintained and clean. Regularl ...

Technical details Type: Fully automatic snus pouch production and packing line Configuration: 1. Raw material feeding hopper 2. Raw material mixer 3. Packaging sorter (lower plastic container section) 4. Main machine for nicotine pouch production 5. Packaging machine for placement of upper lid on containers 6. Conveyor system 7. Label application machines 8. Overwrapping / carton packaging machine (10 boxes in cellophane) Application: Fully automatic production and packaging of nicotine pouches / snus products Condition: Used industrial line Auction-ID: A7-40554-11

Equipped with a 6-wheel tandem axle under each rotor Mudguards above the wheels Wide tires Very well maintained machine Auction-ID: A3-43539-19217

Line for painting door glass, consisting of: - automatic loader with flap arm equipped with LOGLAS 16.30 suction cups - automatic loader with bridge structure, programmed picking on LOGLAS/CL 16.30 trolleys - automatic oscillating spraying machine FALLENGLASS 1700 - year 2007, with belt conveyor covered with paper, complete with inlet roller conveyor extension with oscillating and ionizing blower unit - PRE-HEATING OVEN in-line with lower infrared lamps PRE/I-NIR - 180° sideshift with ventilated transversal flash-off oven with CEFLA GT180/3400/5500 air-heating coil - in-line drying oven with hot air and infrared lamps GLASSOVEN EL/7 - year 2007 - cooling tunnel with upper and lower air curtains CEFLA GLASSCOOL SI-3/3 - year 2007 - motorized conveyor VTR 2500 - automatic unloader on trolleys with CEFLA bridge structure UNLOADER -WASHING MACHINE NOT PRESENT- Auction-ID: A7-470 ...

Total force (nominal):800 to Clamping surface (left-right):x mm Clamping surface (front-back):x mm table surface area:3200 X 2200 mm Total force (nominal):2-3-4-5- Presse - 600 to. to table surface area:2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300 Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface an ...

material width:400 mm coil weight:3,0 t material thickness:0,5 - 4,0 mm coil internal diameter:460 - 530 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:50 mm no. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mm material cross-cut:1600 mm² speed of coil line:0 - 20 m/min power requirement:35,0 kW weight:10,5 t dimensions (WxDxH):10,0 x 2,5 x 2,9 m straightening machine:KRE 50.400/9 adjustment of straightening rolls :motoric insertion wedge:hydraulic adjustable decoiler:3000.1 snubber roll:hydraulic expansion:hydraulic sideway adjustment:motoric pivoting:manual roll feed:Servo; WVE 160/400 intermittant lifting:hydraulic

material width:300 mm coil weight:2 x 1,25 t material thickness:0,4 - 1,2 mm coil internal diameter:320 - 420 mm coil external diameter:1300 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 roll diameter:30 mm speed:3 - 30 m/min feed length:0 - 9999,9 mm power requirement:3,0 + 2,5 kW weight of decoiler:0,7 t dimensions decoiler (WxDxH):2,1 x 1,4 x 1,5 mm weight of straightening machine:0,45 t dimensions straightener (WxDxH):1,5 x 0,8 x 1,1 mm weight of the feeder:0,4 t dimensions feeder (WxDxH):1,2 x 0,8 x 1,1 mm universal straightening machine:SC 12-FQ double decoiler:2352 B-FPS expansion:hydraulic lag brake:pneumatic electronic roll feed:WAV-RDS-2Z, Modell 1082 B intermittant lifting:pneumatic control:Siemens S 5

material width:600 mm coil weight:5,0 t material thickness: - 5,0 mm coil internal diameter:360 - 660 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:80 mm number of draw-in rolls:2 material cross-cut:1600 mm² weight of feeeder-straightener:2,5 t weight of decoiler:1,5 t dimensions feeder-straightener (WxDxH):1,7 x 1,7 x 2,6 mm dimensions decoiler (WxDxH):1,8 x 2,0 x 2,3 mm feeder-straightener:VCRL 650, Bj. 1994, GR 2001 height adjustment:motorisch alligator opening:hydraulisch decoiler:SHR 5000, Bj. 2000 expansion:hydraulisch

material width coil line:600 mm coil weight:2 x 3,5 t coil internal diameter:460 - 530 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm no. of straightening rolls:7 no. of rolls at in- and outlet:4 roll diameter:80 mm feed length:0 - 500 mm power requirement:10,0 kW weight:10,0 t dimensions of the coil line:8,8 x 4,0 x 2,55 m straightening machine:Dimeco, 1676 EV double decoiler:2382 FFPS lag brake:pneumatic electronic roll feed:Microfeed

material width:500 mm coil weight:3,0 t material thickness:0,2 - 2,5 mm coil internal diameter:470 - 530 mm coil external diameter:1400 mm no. of straightening rolls:9 straightening roll diameter:40 mm number of inlet and outlet rolls:4 material cross-cut:1200 mm² speed:1,5 - 30 m/min dimensions decoiler (WxDxH):1,9 x 0,6 x 1,7 m weight decoiler:1,1 t dimensions straightener (WxDxH):3,3 x 1,3 x 2,7 m weight straightener:3,0 t straightening machine:RYD 40 x 500 decoiler:DY 500 x 3000 coil lifting device:hydraulic rool feed:elektronic; AESL 500-2,8 threading device:hydraulic expansion:hydraulic

Overview  This filling line for non-carbonated beverages in PET bottles was manufactured in 2011 and comprises a filtration system, a filling and capping machine, a labeling machine and a pallet wrapping machine. It is designed for bottle sizes from 1.5L to 5L. The line is being sold as the factory has been closed. All machines are professionally stored and can be inspected on site. Technical details  Filtration system | GYM Internacional | 8000 | 2011 Manufacturer: GYM Internacional Model: 8000 Year of manufacture: 2011 Capacity: 8,000 L/h Power consumption: 4 kW Dimensions: 2,500 x 1,500 x 100 mm Weight: 1,110 kg Bacteriological filtration through housing system Automatic filling monoblock | GYM Internacional | Grupo 9-1. PK | 2011 Bottle formats: 1.5L & 5L PET Output: 1,600 bottles/hour (1.5L) 700 bottles/hour (5L) Filling heads: 9 Capping heads: 1 (screw cap) Bottle diameter: Min.  ...

Used Complete CSD Can Bottling Line – 14,000 cans/hour – Overview This second hand, complete CSD can bottling line is engineered for carbonated soft drink (CSD) beverage production and industrial packaging at up to 14,000 cans per hour on 250 ml format. The core of the line is an Ortmann Herbst isobaric can filler with 45 valves, paired with a Ferrum 706 6-head can seamer (can ends size 200). The scope includes depalletizing, can washing, filling and seaming, tunnel pasteurization, in-line inspection, coding, secondary packaging, palletizing, and end-of-line handling, providing a turnkey used bottling line solution. Technical Specifications & Performance Data Core Monoblock: Can Filler–Seamer Filler: Ortmann Herbst, isobaric, 45 valves (year: 1980) Seamer: Ferrum 706, 6 heads (year: 1982) Product type: Carbonated soft drinks (CSD) Nominal capacity: 14,000 cans/hour on 2 ...

Overview This Paxona line distributor for trays was manufactured in 2011 and is designed to divide a single infeed lane into two parallel lanes. The system is typically used in packaging or conveying lines to distribute trays efficiently to downstream machines such as packers, fillers, or palletizing systems. With less than 5,000 operating hours, the unit has seen comparatively low usage and represents a well-preserved solution for line balancing and product distribution. Paxona equipment is known for robust construction and reliable integration into automated production and packaging environments. The distributor is suitable for tray handling applications where a stable and controlled product flow from a single lane to two parallel lanes is required. Technical Data  Manufacturer: Paxona Machine type: Tray line distributor / lane divider Function: Distribution from 1 lane to 2 lanes Yea ...