filling glass used for sale

Number of filling station: 2, filling cylinder volume: 10-200ml, supply tank capacity: 100l, controls: Siemens, suitable for sauces, marinades, oils, liqueurs, soups, mayonnaise, with various spare parts.

Qty. 1 Second-hand bottle filling line – still in operation Mfc.: Maypack, Krones, Gernep, Sidel/Cermex, BK-Int. Built: 2003 – 2021 Capacity: 9000 btl/h of saturated beer 4.5 GR/L Type of bottles: Small bottle 15 cl Appo 25 cl & 33 cl Long neck 33 cl Steinie 33 cl Special long neck 33 cl (bypass rinser) Bottles: 0.5 L, 75 cl, 1.5 L Scope of supply: Bottle Depalletiser Rinser-Filler Labeler Can Depalletiser Palletiser Boxes Wrap Around Packer

System includes (1) Servo-Controlled Filling Machine Rationator Robomat L1M, number of filling stations: 8, controls: RATRONIC-CONTROL, weight: 1.1t, year of construction: 1999 (2) Capper Rationator Robocap 1/4, weight: 1.35, year of construction: 1997 (3) Labelling Machine Breitner TPE 6033, year of construction: 2004, has been regularly serviced, on-site inspection is possible.

This machine is used for filling and closing round cups with the following dimensions: Outer dimensions height/opening diameter/bottom diameter: 89.7mm(+0.4mm)/⌀94.8mm(+-0.4mm)/60.5mm. Capacity: 400g, angle: 6°. Possible packaging formats: Cup: ⌀95mm, height=90mm, flat lid: ⌀95.5mm, snap-on lid: ⌀98.5mm. Filling: pasty to liquid foods.

Make : Hassia Model : THL 24/28 Stations : Plastic Roll insert— Pre Heat —Forming to Cups —Filling — Sealing — Cutting in Pieces — Robot pick and place — Wrap Around Carton Packer Volume : 10gr -20gr Product : Margarine/Butter Capacity : 37,000 pieces per hour Circles per Min.: 25 Y.O.M : 1986 S.N : 1021800287 Electric : 220 ~ 3 / 50hz / A: 65 Weight : 5000kg Dimensions : 5500 x 800 x 1700 Air : 6 Bar

There are two identical machines available, operating temperature: 250°C, connected load: 3kW, the heating regulators are defective.

Including Ascending Conveyor SBM 45 and Counting Machine ZMR 3/ 3-130.

Filling format: 70-150g, forming shoulder format: 120/ 140mm, with three forming sets and multi head scale.

Product dimensions: 650-1200x300x240mm, roll width: 800mm, roll diameter: 350mm, max. speed: 50 cycle/min, length: 5170mm, width: 1452mm, height: 1435mm, weight: 1.1t, one band is torn and needs replacing.

Max. speed: 90 bags/min.

Was used for filling 10l milk bags, there is a second machine as a source for spare parts available.

Was used for filling 1l milk bags, output: 1000l/h, the electronics of the machine was overhauled.

Bottle filler, Fabr. SEN, type Combi-RE H2, with 30 filling organs and 6-digit KK, set up on 0.5 lt + 0.33 lt NRW Longneck + 0.5 lt EURO-Fl, running direction: left --> right, with vacuum pump (slightly leaking), discharge table, various spare parts, S5 control, incl. operating instructions, built in 1991, already removed

Max. Output: 300cycles/min, max. stacking speed: 30packs/min.

Compressed air supply: 6bar, connected load: 7kW.

There are two identical vertical bag filling machines available, weight: 1.1t.

Working height: 820-900mm, max. film width: 550mm, output: 60 cycles/min, product width: 25-450mm, product height: 2-200mm, product length: 80mm to unlimited, connected load: 3kW, length: 2140mm, width: 1450mm, weight: 650kg, with documentation.

Capacity: 9,000 bottles/h Product: Oil in 1,0l PET

Max. output: 10,800 cups/min, cup format: 2x3, with documentation, film transport, main filler, laminar air over the entire filling line, laminar tunnel from the moulded part to the film lift with laminar box, die cutter with spare die cutter, packer, Mettler-Toledo weighbridge, outfeed and high stacker, regularly overhauled.

Hopper capacity: 250l, length: 2100mm, width: 1300mm, height: 3100mm.

Capacity: 110l, operating overpressure: 6at.

Output: 14,000 bottles/h, number of filling vents: 55, output: 14.000 bottles/h, number of vents: 55, running direction: left to right, with Labelling Machine KRONES UNIVERSELLA 723.

Output: 90-120/h, keg dimensions: 365-570x355-650mm, with instruction manual and layout.

Output: 8000 bottles/h, machine is fully functional.

Bottling line KP 2010 Automatic bottling line for bottles. Filling up to 2 liters 6-head filling Speed + 3000 bottles / hour depending on bottle size and product Material stainless steel Lightweight construction, wheels underneath, easy to move Conveyor slatband type, length 4 meters Gutter under the conveyor Electricity 380 v. Compressed air: 6 bar

Method: Bag-in-Box, filling format: 1.5-20l, output: 5-9/min, including documentation.

Dällenbach aerosol filling and lid tightening device Models WA 500-E and VG 82

Used Edelmann carton erecting, filling, sealing machine for powders Manufacturer: Edelmann GmbH ( Germany ) Type: SE 6.1 Year: 1988 Closing of cartons with inside paper bags Auger filler Last filling cocoa powder as follows sizes: 250 g / 500 g / 800 g / 1000 g

There are two identical filling machines available, format: 1000ml, output: 7000l/h, with Packer Tetra Pak TCBP 70-1200 and Capper Trepak Capper 120, available in May 2024.

Format: 0.5-1l, max. output: 5000 cartons/h, with cap applicator and EURO-LINE cartoning machine, an on-site inspection is possible.

Autom. casule filler incl. sep. control panel and vacuum cabinet.

With cryogenic cooling system, was maintained regularly, including spare parts and extensive documentation.

Max. output: 40/min, with capper, filler, inspection and inkjet printer.

System includes (1) Filling Machine, number of filling stations: 4, format: 100-1000ml, with piston stroke (2) Capper Kugler K 708, year of construction: 1993.

REF-2261 AUTOMATIC CAN SEAMER SOMME NORA-313-VAC WITH VACUUM FILLING MACHINE 6 VALVES Automatic tin can seaming machine with 6-valve filling system Manufacturer: SOMME Model: NORA-313-VAC Can size: 3kg Output: 3,000 cans/ hour Vacuum pump dimensions: width 1,000mm, length 1,300mm, height 1,800mm Overall dimensions: width (including infeed belt) 3,600mm, length 1,900mm, height 2,000mm

Format parts: 17x 0/ 11x 00/ 10x 1/ 10x 3, output: 80,000/h, including accessories.

With accessories, an inspection is possible.

Operating modes: Automatic (at regular intervals) and pedal control. Volume range: 200ml-5000mm, material of product contact parts: AISI 316 stainless steel.

1 aseptic SIG Combiblock carton filling machine Type: CB 510 Int. Designation: Combiblock Line 4 Power: 10,000 pcs/hour Standard formats: 500ml, 750ml and 1,000ml Format changeover within 2 min without Replacing parts With 3 packaging paths next to each other With valve nodes With all surrounding machines to Production of aseptic packaging with screw cap Energy consumption: Electricity: Approx. 50 kWh Compressed air: 6 bar, approx. 70 Nm³/h Water Drinking water quality: approx. 400-600 l/h Steam: Saturated steam 4-16 bar, min. 60 kg/h, Temp. min.154°C , consumption production with steam injection, 10-14 kg/h Pack sterilization with H2O2: Consumption at lfd. Production: approx. 3.6 l/h. Installation dimensions for the SIG machine LxWxH: 7,500 x 3,300 x 4,400 mm free Ceiling height. Complete space requirement with carton packer and screw cap application t ...

This line is an automatic filling line for bottles with Ø 38 mm wide mouth neck including aseptic filler, filling height control unit, labeling, foil shrinking, handle applicator and conveyor system used in the PET bottling for still and cold products like milk or juice.

Used filling and packaging line for bulk or general cargo Composed of: - Multihead scale MULTIPOND - 4-pipe flow wrapping machine INNOTECH 700 SZQ - Carton erector - Carton filler - Carton closers - Cellophane system - Robot cell for erecting, filling and closing secondary packaging - Extraction tape - Conveyor belts, control cabinets The facility is in very good condition. Viewing and test run are possible by arrangement. We will be happy to send you further information on request.

Automatic tube filling and sealing machine for PE and laminate tubes including: - Format set D.19 and D.35 - Tube magazine for empty tubes - automatic tube orientation - Hot air sealing unit Leister - Coding device on the tube fold on one side - water-cooled sealing jaws - cooling of the weld seam with cold air gun - Siemens PLC - 50L product hopper

A used Bertolaso gravity filler "Athena" with 40 filling valves and an 8-digit sealer "Sigma 2010/8 - SX" with cap feed and pneumatic closure conveyor is offered. The machine ran actively in our company from 2012 to 2016 and was then dismantled for the construction of another line. Songs did not come to the construction of the line, so that the machine is fully dismantled in stock. A visit can be done by appointment. The dimensions of the filler are: 2960 mm x 2830 mm x height 3250 mm The machine is "packed" on 3 main items: 1. Filler: 1900 x 1900 x 2960 approx. 3200kg 2. Substructure: 2550 x 1450 x 2710 approx. 2200kg 3. Fairing and various accessories distributed over several pallets: 5000 x 2250 x 1750 approx. 2400kg The filler is designed for bottling still fruit juice at 85°C. Electrical connection: 25KW 400V/3Ph./50Hz Compressed air: 6 bar 600NL/min Water: 3 bar  ...

FDB Cup Filler for Yoghurt Filling Per Time : 4 cups Cup diameter : 95mm Condition : Refurbished Available from order 60 days Stations : Cup Dispenser -Filling-Aluminium lid - Sealing -Conveyor

Filling Machine previously used for Milk Filler has 6 head filling and 2 head capping Cap Size : 38mm Labeler Conveyors Induction Sealing

Spare parts for Nagema packaging machines PA1 / HM4 etc. Complete format sets for Nagema flow wrapping machines. Various stainless steel fittings ( 2 & 3 - waycock, arches, butterfly valves etc. )

REF-0 SOMME 323 CAN SEAMER WITH 5 HEADS AND VACUUM FILLING SYSTEM 20 VALVES Automatic tin can seaming machine with 5 seaming heads. Fitted with a 20-valve vacuum filling unit. Manufacturer: SOMME Model: 323 Can size: Ø 73mm (easy-open lids) Overall dimensions: length 3,400mm, width 2,800mm, height 2,200mm

IMA complete bottling and packaging line for syrup-like products in bottles of 100ML-125ML-200ML-250ML, consisting of: 1. LIBRA Starpack 240 – bottle unpacker, 2. LIBRA Pharmaceutical Technologies MISTRAL Y16 – rotary bottle cleaner and blower, for dry cleaning of glass or plastic bottles with air jets, with a star wheel bottle transport. 3. IMA FARMOMAC F550 – machine for applying anti-drip rings, for bottles with a diameter of 16-80mm and a height of 40-270mm 4. IMA F540 – rotary filling machine with 12 filling heads, dosing capacity up to 300 ml., with star wheel infeed and outfeed for bottles with a diameter of 16-80mm and a height of 40-185mm, machine net weight approx. 2400kg. 5. IMA F572 – capping machine for tamper evident bottle caps (dosing cup, childproof, etc.) with 8 closing stations, for filled bottles with a diameter of 16-80mm and a height of 40-165mm, max. ...

-Manufacturer: TESSA -Capacity: 1500 Btls/h -Filling Machines - Two Pcs -Labeling device ( Self- adhesive labels) -Shrink tunnel -Set of conveyers -PET Bottles blowing machine -Mold for blowing PET bottles 1 l -Mold for blowing PET bottles 0.5 l

Ultrasonic tube filling and sealing machine with the following equipment: - Basic machine - Blank tube magazine incl. tube feeding chute for autm. Entering the blank tubes - automatic tube alignment according to the typeface or identification mark - Ultrasonic capping unit for closing PE and laminate tubes - Coding device on the tube fold, one-sided, incl. 4 set of coding numbers (0-9) - Cutting device on the tube fold - 1 format set for PE tube size D.35 mm - Format range 19mm - 50mm tube diameter - Cycle rate 15 - 30 tubes/min. Depending on product Please also note our current machine offers ( NEW + USED ) on Resale under : abc://abc.resale.de/angebotelinkd-user.php?myid=35837&dealer=1&order=1 & abc://abc.resale.de/angebotelinkd-user.php?myid=35846&dealer=1&order=1 & Visit us also on : cbv-pack