filling capping used for sale

Product number: 2689 Type: PA30-7 Serial number: 821 Capacity: max 4800 kg/hr Filling pressure: up to 55 Bar Power: 3 x 380V, 50Hz, 4.3kW Dimensions: 900 x 600 x 1300 mm Weight: 375 kg Filling, portioning and linking

HANDTMANN VF-630

Liquid dosing unit (oil dosing unit) Dosing unit with 12 dosing nozzles For automatic filling of cups, containers, trays, thermoformed packaging, etc. designed with 6 filling flow outputs with SIEMEN SIMATIC S7 – 300 PLC controller Hopper (capacity) up to 55 litres Dosing unit with 12 dosing nozzles Equipped with 6 filling stations (each with 2 dosing nozzles) Dimensions set-up for the machine: 75 x 150 x 220 cm (W/D/H)

We sell here a vacuum filler from the manufacturer Frey, type KA 50 in a very good used and functional condition. The machine runs on 400 volts, 3.0 kW, completely stainless steel, with holding device, casing applicator, cornucopia, LCD control, workshop tested, immediately ready for use, dimensions W/D/H 70/70/160 cm, others on request.

We sell here a vacuum filler from the manufacturer Vemag, type 134 in a very good used and functional condition. The sausage filler is built in 1999, runs on 400 volts, programmable, hopper divisible, incl. filling cone, for filling, portioning and unscrewing, workshop tested, ready for immediate use, dimensions W/D/H 60/80/160 cm, others on request.

Continuous vacuum filler for straight filling and portioning - Machine features: - All-in-one 250 l hopper with counter arm and reinforced scraper, - Integrated vacuum pump 20 mᶟ - Double screw - Standard double screw housing Control: РС Program memory for 99 filling programs, Portion weight: from 5 up to 60 000 g Lifting and tipping device for HPC with 250 l hopper To fit standard trolley, 200 l capacity Machine dimensions in сm: Width: 134,0 Length: 220,0 Height: 200,0 Power: 9,5 kW Voltage: 380 V, 50 Hz Weight: 1300 kg

Product number: 2801 Type: Kompakta 2-30 Serial number: K230C10136457 Year of construction: 2017 Content: 30 litres Power: 3 x 400V, 50Hz, 3.7kW Dimensions: 770 x 930 x 1250 mm Weight: 350 kg For filling, portioning and linking With casing holder

Filling machine Rex culvert RVF 80, Vacuum filling machine with portioning and twisting, new control system installed in 2022, Connection 400V, 5kW, dimensions LxWxH approx. 92x74x166cm, weight approx. 464kg, good used condition, works perfectly.

Product number: 2832 Type: VF50 Serial number: 2157 Pump capacity: max 2600 kg/hr Filling pressure: max 55 Bar Portioning range: 5 - 100000 g Hopper: 80 litres Power: 3 x 380V, 50Hz, 4kW Dimensions: 1050 x 930 x 1650 mm Weight: 450 kg Filling, portioning and linking Including 34-4 linking device MC controls

Used vacuum filler FREY, type: Konti A50 - good condition More information on request.

Vacuum filling machine Handtmann Type: VF 608 Compact control with 10" display and Windows-CE control interface Great versatility and flexibility for applications with all types of products Long service life and little wear through the use of industrial technology The integrated water separator is very easily accessible at the front door Simple combination with auxiliary attachments, such as clipping machines Divided hopper for fast, easy cleaning Filling capacity: 2000 kg/h Filling pressure: up to 25/40 bar Dimensions: 120x122x204cm Electrical power: 3kW Voltage: 400V 50Hz

Hydraulic Piston Filler Mainca Made of stainless steel Dimensions: 65x50x125cm Electrical power: 1.1kW

Handtmann VF 608 Plus, vacuum filling machine for filling, portioning, linking, with servo drive, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g., MC control (colour), 10243 operating hours, refurbished condition.

Vacuum filling machine Vemag Robby Type 136 Filling, portioning, linking PC-Control AC Servo drive Including linking device Filling performance: depending on the goods up to 2700 kg/h Portioning weight: 5-60000 g - variable adjustable in steps from 0.1 g or 1 g Portioning speed: up to 650 portions per min (depeding on product, casing and portioning size) Speed of rotation: 0-100%, variable adjustable Linking: 0-10, variable adjustable

Vacuum filling machine Vemag Robby 2 Type 135 Filling, portioning, linking PC-Control Including loading device for 200 ltr. bins Including linking device Filling performance: depending on the goods up to 3000 kg/h Portioning weight: 5-60000 g - variable adjustable in steps from 0.1 g or 1 g Portioning speed: up to 650 portions per min (depeding on product, casing and portioning size) Speed of rotation: 0-100%, variable adjustable Linking: 0-10, variable adjustable

Frey Kompakta 2-30 piston filler, straight filling, portioning, linking, suitable for all types of sausages, casing holding device optially available, 30 liters filling cylinder, LCD3 control with TFT color display, memory for 100 filling programs, portioning speed up to 250 portions/min, portioning range 5 - 10,000 g, fill level indicator, piece counter, count-based auto stop.

Product number: 2848 Type: VF300 Serial number: 1217 Year of construction: 1990 Pump capacity: max 10000 kg/hr Filling pressure: up to 35 Bar Hopper: 350 litres Power: 3 x 380V, 50Hz, 9.5kW Dimensions: 1300 x 1600 x 2050 mm Weight: 1350 kg Filling, portioning and linking, MC controls With lifter for 200L tote bins Including 34-4 linking device and HV 60-6 holding device

Vacuum filler Handtmann Type: VF 610 Hopper capacity: 40\100 (liters) Filling capacity: 3000kg/h Stuffing pressure: 35/50 bar Porting speed: Portions Size 25 - 450 Portions/min Portions Size 50 - 375 servings/min Portions Size 100 - 280 servings/min Portions Size 200 - 190 servings/min Power: 3.5 kW Weight: 475 kg net External dimensions: 120 x 122 x 204 cm Twisting and holding device included in price 5,000 engine hours Condition: After inspection, ready for work The stuffer can work with all popular types of casings: natural casings, collagen

Electronic vacuum stuffer. Stuffer specially designed for the drawing of all calibers, in natural casings such as collagen, cellulose. The RVF 327 stuffer is designed for small and medium-sized companies, with frequent changes in the type of products and standard quantities of meat sausages. The RVF 327's distinguishing features are reliability, quick and easy cleaning, minimization of residual product or waste, and low energy consumption. The vane rotor feed pump, made of wear-resistant stainless steel, ensures a long service life and the highest product quality. Achieving smooth handling of all sausage mixtures with a minimum of air bubbles. The touch screen simplifies operation for the user and has been designed for industrial use. Available with 200 litre loading hopper. It has a port for connection and control of the different staplers or other accessories. Characteristics: H ...

CLEARANCE: The CATO vacuum mixer-mixer, model AV300E, is highly versatile, useful for all types of food (vegetables, meat, fish, ...), The incorporation of vacuum also increases the organoleptic and preservation qualities of the product. The lid is opened manually. Machine entirely built in stainless steel. It works with two T-shaped arms with two directions of rotation. The double T-arm gives the product an unbeatable appearance thanks to optimal mixing and kneading in a short space of time. All kinds of sausages, assorted and pre-cooked charcuterie: Kneading of minced meat with additives, sausages, sausages, salamis, massaging of large pieces of meat, York bar, botifarra, black puddings, Catalan, fresh sausage, various pâtés, mixtures, degassing of sauces, raw salads, cooked salads... etc. TANK CAPACITY/litres: 300 LT TANK CAPACITY IN KG: (Approximate capacity depending on the  ...

The REX RVF50 vacuum filler is a compact and versatile piece of equipment designed for small to medium-sized production environments, particularly in the food processing industry. It ensures precise portioning and elimination of air pockets in the product, which is essential for maintaining product quality and consistency. It features an intuitive control panel, making it easy for operators to set up and adjust the machine’s parameters, leading to reduced training time and increased productivity. In set with a variety of attachments and accessories, such as different filling tubes, twisting and casing holder enhancing its flexibility to meet specific production requirements. Power: 4kW Efficiency: up to 2700kg/h Hopper capacity: 50l Dimensions: L: 650mm x W:950mm x H: 1600mm

The Handtmann VF612 vacuum filler is known for its precision, reliability, and flexibility. Air-free filling technology is crucial for maintaining the quality and shelf life of the product. Handtmann fillers meet the strictest standards in the food industry. Intuitive touch-screen operation makes it easy to set various programs and allows to connect additional devices such as AL line. All stainless steel construction. Machine is equipped with a Bush vacuum pump with a capacity: 16 m3/h. In set with twisting and casing holder Portioning range: 5 – 100,000 g Efficiency: up to 600 portions per minute and 3000kg/h Filling pressure: 35 bar Hopper capacity: 90/240l Power: 4.5kW Electric: 400V, 3ph, 50Hz Total dimensions: L: 1450mm x W: 1300mm x H: 2100mm Weight: 500kg

Complete line Handtmann VF616 + AL System 228-01 + hanging unit 242-16 Technical data: Handtmann VF 616 stuffer, year of manufacture 2017 – Main drive with servo technology – Connection: 12 kW with GD 93-3 – Filling pressure up to 45 bar – Filling capacity up to 3,600 kg/h – Tank with a capacity of 240 liters, – Vacuum pump 16 m3 – Control unit with 10-inch color display and user interface Interface Windows CE user interface for connection to AL system – Operating voltage 380 – 440 V – Integrated weight compensation, – Portioning and fine adjustment from 0.1 g – Portioning range from 5 to 200,000 g – Portioning speed up to 700 portions/min. – Feeder and counter-holding scraper Portioning machine plus hanging unit PVLH 228-01 and 242-16 year of manufacture 2017. – 5.5 kW connection – Sercos drive technology – Part length from 25  ...

The Handtmann VF 80B stuffer stands out for its exceptional efficiency, boasting a filling rate as high as 3,000 kg/h. This makes it an excellent choice for industrial-scale production. Its versatile portioning capabilities allow it to accurately fill amounts ranging from a mere 5 – 100,000 grams and it can exert a filling pressure of up to 35 bar. A standard 100-liter meat bin lift complements the stuffer. In set with casing holder and twisting Details: Brand: Handtmann Model Type: VF80B Volume: 80 liters Electrical Requirements: 400V 50Hz 3N Power Consumption: 4.5 kW Dimensions: L: 1650mm x W: 1050mm x H: 2100mm.

Sausage production line VEMAG VEMAG vacuum stuffer Type: ROBOT HP 10C Hopper capacity: 250 l Productivity: 4000-5000 kg/h External dimensions: 2100 x 1350 x 2150 mm Filling pressure: max. 40 bar Maximum serving size: 0- 10000 Vacuum pump: 20m3/h Total power: 9.5 kW Hydraulic pump power: 7.5 kW Filling speed adjustable 0 - 100% Device for automatic unscrewing and portioning to length Type: LPG 208 Power: 6.0 KW External dimensions: 1650 x 1000 x 1350 mm For natural, collagen and artificial casings For connecting and portioning all popular types of casings of equal lengths using mechanical dividers according to the following principles: Fixed section length separation tape that can be changed via quick release For sausages with a caliber of 13 to 40 mm For sausages with a length from 20 mm to approx. 400 mm Portioning speed: over 2000 ports/min. (depending on t ...

Filling machine Frey Kompakta 2, piston filling machine 30 liters, with casing holding device, accessory, year of construction 2003, Top maintained machine, only 1371 operating hours, turning with new bearings, instruction manual Connection 400V, dimensions LxWxH approx. 80x73x122cm, weight approx. 363kg, very good used condition

Filling Machine Vemag DP 3, Vacuum Filling Machine, with rotary gear, new DHV (long version) incl. 4 filling tubes complete 14-20mm, Numerous other filling tubes, accessories, operating instructions, 2 sets of rotor blades, Top maintained machine, built in 2013, only 3831 operating hours, Connection 400V, 6kW, dimensions LxWxH approx. 75x88x175cm, weight approx. 445kg, very good used condition, fully functional Price without DHV with filling tubes 17.500,-€

Sausage filler Frey Kompakta 2-30, K2-30, 30 litres, 400 V, 3.7 kW, 16 A, very good condition!, BJ 14, electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, complete Stainless steel, speed, speed and pause length infinitely selectable, Level indicator, piece counter, number of pieces switch-off, portioning range 5 – 10,000 g, Portioning speed up to 250 portions/min., with accessories Filling tubes 12,14,18,20,24,30,42,46 mm, 1x for 99 mm cans Dimensions 60x80x110 cm, original price 32900,00 €

Vacuum filler Manufacturer: Vemag Model: Robby 1 PC-control with 99 program storage Filling capacity: max. 2.700 kg/h Filling pressure: max. 40 bar Dimensions: 205x130x210cm Electric power: 5.4kW Voltage: 400V 50Hz

Vacuum filler Manufacturer: Handtmann Model: VF 612 Portioning range: 5 – 100,000 g Efficiency: up to 600 portions per minute and 3000kg/h Filling pressure: 35 bar Hopper capacity: 240l Power: 4.5kW Electric: 400V, 3ph, 50Hz Dimensions:215x160x225cm Weight: 500kg

Vacuum filler with accessories Manufacturer: Handtmann Model: VF 616 + AL 216 - 21 Dimensions: 215x160x225cm/150x70x130cm Electric power: 6 + 2.5kW Volume: 350 liters Capacity: 3.600kg/h

Piston Filling Machine/Sausage Filling Machine/Piston Filler Manufacturer: FREY Type: KOMPAKTA 2-30 Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning and twisting of all types of casing. Particularly gentle filling with a clear filling pattern. Equipment: 30 litre filling volume Machine solid stainless steel Speed, rev speed and break length can be infinitely selected Level indicator, unit counter, number of units switch-off Serving Addition 1st Serving Portioning range 5 - 10,000 g Portioning speed up to 250 portions/min. Filling cylinder with a capacity of approx. 30 litres, solid stainless steel with sliding lining Piston made of high-quality, wear-resistant plastic Connected load 3.70 kW Three-phase 400 volts, 50 Hz, 3 phases LCD3 control with TFT colour ...

DMS DF25C Piston Filler used Machine was built in 2017 and is equipped with 3 grommets The machine is completely made of stainless steel (body, cylinder, piston and cover) and is in good condition, but should still be thoroughly cleaned before use Video about test run available

Used bottling line by Pack-Trend, new 2020. Machine type: Dispensing, capping, labelling machine Weight: 675kg Type of medium: liquid, gel, cream. Material stainless steel AISI304 Machine capacity: up to 900 cycles/hour Packing portion: 0,1-0,5 L Machine dimensions working: Height H - 1600mm Width B - 1500mm Length L - 3000mm. Electrical supply: 230V/50Hz Pneumatic Supply: 6-8 bar Power consumption: 1500W Accessories: ROTARY RECEIVING TABLE ROTARY INFEED TABLE Certification: CE Technical and Operational Documentation.

Used Index 6 Filling and Capping Spreads and Sauces Unit 2014 The filling unit known as the Index Indose is PLC and servo weight controlled allowing it to efficiently fill quantities ranging from 250 grams to 3 kilograms Depending on the specific product the filling speed can range from a minimum of 2000 pieces to a maximum of 4500 pieces per hour Currently the system is set up to fill 400 grams of hazelnut paste into glass jars but it can be easily adjusted to accommodate products with different viscosities and volumes The input voltage required is 380 volts at 50 Hz consuming 3 5 kW h of power Capping Unit On the other hand the capping unit named the Index In Close is a newer model from 2021 It is PLC controlled and capable of capping up to 4500 pieces Additionally it includes an automatic cap conveying elevator for streamlined operation Similar to the filling unit the capping system i ...

Enoberg Bottle Filling Monoblock for still water This used Bottle Filling Monoblock model EVF 24 24 6 N S comes with an integrated rinsing filling and capping system and consists of A rotary rinser with 24 nozzles for the rinsing of bottles A rotary filler with 24 valves for the electronic volumetric filling A capper with 6 heads for the application of plastic screw caps or pressure caps Monoblock Bottling with a machine pitch of 150 72 mm Counterclockwise machine Neck Handling bottle conveying system Key features The Enoberg Filling Monoblock for still water distinguishes itself with its compact frame which considerably simplifies operations to manage clean and maintain the machine and ensures substantial savings on space Filling module equipped with electronic meters to ensure precision The working space of the machine is entirely made of stainless steel and glass ensuring a high stand ...

Fully automatic filling and closing machine for filling pharmaceutical liquids into vials. Suitable for aseptic filling and for vaccines. The main machine doses with peristaltic pump system safely, precisely and caps the vials with a freeze dryer stopper. The 8-head capping machine also works very quickly, precisely and is suitable for aluminum twist-off caps. The vials are guided individually, which enables safe and fast filling and capping. The included collecting table for the final product, the main machine and the capping machine can be flexibly combined to a complete line. All machines are equipped with dust cover and laminar flow hood. - Specifications of filling and capping system: number of filling stations: 4 | number of capping heads for freeze dryer stopper: 1 | number of capping heads for aluminum twist-off caps: 8 | filling volume: max. 30ml per vial | speed of the machine  ...

Fully automatic filling and closing machine for filling pharmaceutical liquids into vials. Suitable for aseptic filling and for vaccines. The main machine doses with peristaltic pump system safely, precisely and caps the vials with a freeze dryer stopper. The 1-head capping machine also works quickly, precisely and is suitable for aluminum twist-off caps. The included collecting table for the final product, the main machine and the capping machine can be flexibly combined to a complete line. All machines are equipped with dust cover and laminar flow hood. - Specifications of filling and capping system: number of filling stations: 4 | number of capping heads for freeze dryer stopper: 1 | number of capping heads for aluminum twist-off caps: 1 | filling volume: max. 30ml per vial | speed of the machine in neutral: max. 120 bottles/min (at 4 filling stations and 5ml per vial) | accuracy: =  ...

Used filling monoblock KHS Innofill DRS up to 65000 bph Introduction to the Filling Machine KHS innofill DRS The used filling monoblock KHS Innofill DRS up to 65000 bph manufactured by KHS in 2013 and currently in production is a high precision machine for bottling beer Advanced Filling System The heart of filling Machine KHS innofill DRS is its filling system which boasts 168 fixed isobaric valves for uniform and precise bottle filling Moreover this isobaric method is crucial for maintaining the quality of the final product avoiding unwanted foam formation Efficient Capping Unit The capping unit is equipped with 24 heads for the rapid and secure application of crown caps on filled bottles This operation is essential to ensure a tight and secure seal protecting the bottle s contents from oxidation and external contamination Operational and Functional Details The Filling Machine KHS innof ...

Used filling triblock ALFATEK Elvira 16 20 3 year 2009 Initially the ALFATEK Elvira 16 20 3 filling triblock created in 2009 stands as a benchmark of engineering excellence for bottling in glass containers 1 Model Description and Operational Capability Configured for an impressive throughput of 4 000 bottles per hour BPH it specifically targets handling 0 75 liter glass containers Furthermore the Filling Triblock Alfatek Elvira integrates three main operational modules the rinser the filler and the capper Each module is meticulously tailored for a distinct phase of the bottling process ensuring a streamlined operation 2 Rinsing Unit of the Filling triblock Alfatek Elvira The Filling Triblock Alfatek Elvira is equipped with 16 grippers the rinsing system ensures containers are thoroughly cleaned prior to filling Consequently the gripping mechanism is ingeniously designed to handle glass c ...

Filling and capping system for aseptic and precise filling and capping of small bottles with small liquid volumes as used for eye drops, nasal sprays, nail polishes, esoteric oils etc. Dosing by piston pump. - Specifications filling and capping system: number of filling nozzles: 4 | number of capping heads: 2 | filling volume: max. 10ml/bottle | speed in neutral: max. 60 bottles/min | accuracy: = ? 1% | suitable bottles: glass, PP, PE, PVC | product contact parts from stainless steel 316L. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

New Isobaric Filling Monoblock for cans Displayed photo is for model 6 1 and 9 1 6 or 9 filling nozzles and 1 capping head This Isobaric Filling Monoblock system is designed for the pressure canning of carbonated and still products following market standards The automatic process purges the can of CO2 just before the pressure filling and immediately before the application of the lid The single head seaming system has been designed and is manufactured in house Configurable Filling Capping 6 1 9 1 12 1 PRODUCTION SPEED OF ISOBARIC FILLING MONOBLOCK Configurable from 1 650 up to 6 000 cph BOTTLE Aluminum can all main standards on the market RINSING Optional One or two treatments with fixed or dynamic nozzle CAPPING SEALING Easy open lid seaming GENERAL CHARACTERISTICS Chassis and structure manufactured in inox steel AISI 304 Transmission of the working dynamics with gearmotors and driveshaf ...

Sample system for volumetric filling and capping in one monobloc. Stainless steel SS316, 4 or 8 filling nozzles, volumetric injection pump, automatic cap orientation and capping. - Specifications: filling range: 20-1000ml (ideal filling ranges: 20-100ml, 50-250ml, 100-500ml, 200-1000ml) | max. speed of the machine in neutral: 5000 bottles/hour | filling precision < +/- 1%, yield of capping > 99% | power: 220V, 1.2-2.2kW | 0.6m?, 6bar | weight: 800-1000kg. - Please note these are sample specifications only. - Please ask for an inquiry and let us know your product details (size, shape, required speed , product, etc.) to prepare an individual quotation for you. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have ver ...

Used Filling Monoblock Cimec model 9 8 1 R for still wine glass bottle Used filling Cimec monoblock model 9 8 1 R from 2008 represents a key infrastructure for the production of still wine in glass bottles Designed for a capacity of 1300 bottles per hour BPH this integrated system includes rinsing filling and capping stations configured specifically to handle straight corked still wine Technical details Rinser Equipped with 9 outlets it operates with a single water treatment suitable for ensuring the elimination of internal impurities from containers The direction of rotation is clockwise standardized for a consistent workflow across the different stations of the monoblock Filler It has 8 filling valves that work by gravity or slight depression an effective method to minimize the formation of foam and oxidation of the product The mobile heads facilitate adaptation to different types of b ...

New Filling Monoblock Bertolaso 30 30 4 PET Glass up to 6500 bph Notice Brand NEW Bertolaso monoblock never used Zero working hours Pristine condition The perfect opportunity to purchase a new monoblock at a used price This new Bertolaso 30 30 4 monoblock emerges as an advanced technological solution specifically designed to optimize filling operations for syrups filling system Manufacturer and Model Produced by Bertolaso a benchmark name in the industry this monoblock stands out for its performance and build quality The model specification 30 30 4 combined with its production year 2021 provides crucial information on its current relevance in the bottling solution landscape Speed and Capacity With a speed of 6500 BPH this filling monoblock Bertolaso can handle both PET and glass containers ensuring accuracy and consistency in the filling process Rinser The rinser is equipped with 30 grip ...

Liquid and Viscous Products Filling Line Model: 2021 Model Combo (filling, capping, labeling, collection tray) full filling line. Control: Touch PLC screen Electricity Supply: 3 Phase 380 Volt / 50 Hz Filling System: Hydraulic unit. Product feeding: The machine automatically fills its own reservoir. Products that can be filled: It fills liquid or all kinds of viscous products. Filling Capacity: 10 ml 250 ml. Capacity: 1200 – 1800 Pieces / Hour (Software supported for 500 ml filling if desired) Closing Module: It closes all the covers including the triggers. Packing feeding manual. Automatic filling, capping and labeling. Filling line structure: Chrome stainless quality

Automatic liquid filling and capping system. Suitable for various liquids and oils from the food industry (water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as from non-food (perfumes, cosmetic oils, detergents, etc.). The liquid filling system has 2 filling heads moving in vertical and horizontal direction, which allow continuous filling and thus a higher number of cycles. Automatic detection of the position of the bottles and of the neck diameter of the lid. The Advantage is less adjustment work and sensor settings (within a certain range) have to be carried out. The change to different bottle dimensions is considerably facilitated, which ultimately results in lower machine downtime due to the time savings. Easy adjustment to different bottle width and height without the need for additional format sets. After filling, the bottles are conveyed by a conveyor belt to the au ...

Used Filling Monoblock Cerma 1998 The Cerma 46 MB filling monoblock is a highly efficient and reliable equipment that was manufactured in 1998 It is currently in storage but is ready to be put back into action at any time This monoblock is specifically designed for filling glass and PET containers with vinegar and it uses a volumetric fill type and fixed nozzle to ensure accurate and consistent results The monoblock is equipped with 23 valves which help to ensure that the filling process is fast and efficient It also has 4 capping heads for aluminum screw caps which helps to seal the containers securely and prevent any spills or leaks The rotation direction of the monoblock is counterclockwise This helps to ensure smooth and seamless operation In terms of safety the Cerma 46 MB filling monoblock has all the necessary features to ensure the safety of operators and the integrity of the pro ...

SERAC GAIA filling and closing line for drinking vials, suitable for both liquids and powder ('Vitashots B12'). Comprises two connected filling machines, as follows: 1) GAIA R1V1/520 liquid filling machine with 800mm diameter rotary infeed table, Flexicon PD12L peristaltic filling pump (3 filling heads, filling range 0.2ml to 250ml), and 2 capping stations with vibrating bowl feeders for bung inserts. The cap currently run is a hollow bung, into which powder is dosed on the next machine, and pushed through the bung into the liquid using a pusher 2) GAIA RP1E1E1/520 powder filling and capping machine, with ENLFEX DS-80 auger filler, hopper and feeder inserter for small plunger (to press the dosed powder into the liquid), and cap hopper, feeder and press capper for the overcap. 16 station star wheels, with formats for vial diameter approx. 21.3mm and approx. 37.4mm highsingle elec ...

Cimec Used Isobaric Filling Monoblock 2016 AM S 8 1 VA Introducing the Cimec Used Isobaric Filling Monoblock 2016 AM S 8 1 VA a versatile and efficient machine designed for filling and capping glass bottles with aluminum screw caps This monoblock system offers seamless integration of filling and capping processes ensuring a streamlined production line for your beverage packaging needs Convenient CIP Preparation Equipped with dummy bottles and flexible tubes this machine allows easy connection to the central manifold facilitating convenient and efficient CIP Clean in Place preparation Flexible Bottle Equipment With a bottle equipment range of 82mm and 56mm diameters this machine can accommodate various bottle sizes upon request Compatible Cap Format The cap format supported by this machine is the popular aluminum screw cap specifically the 28x18mm size Reliable Performance Rest assured th ...