filling bottles pet used for sale

Auction-ID: A3-43539-5421

oven 650 Injection Mould Mold furnace temperature range 10 - 650 Celsius 1x1x1m (various possible) Kammertrockenöfen Kammertrockn er Öfen Ölofen Pulverbeschichtungstrockner Pulvereinbrennöfen Schachtöfen Schlichtetrockner Sinteröfen Sonderofen Sondertrockner Temperöfen Tro ckenöfen Trockn er Trockneranlagen Vorwärmofen Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen temperaturi te polaganim hlanenjem. Na ovoj povišenoj temperaturi u materijalu nastaju plastične deformacije te se unutarnja naprezanja izjednačuju. Nitriranje je postupak sličan je cemetiranju, gdje se površina dovodi u kontakt sa strujom dušika koji se veže sa željezom te tvori vrlo tvrde kristale željeznog nitrida (Fe4N). Ovako dobiveni površinski sloj vrlo je tvrd i otporan na trošenje. Nitriranjem se povečava dinamička čvrstoćai otpornost prema  ...

UNDER NEGOTIATION two HUSKY GL300 PET machines for sale, available 2022 Q1 Both upgraded by Husky to run 72 cavities molds, in production, exworks Europe Ask for details,

JUST SOLD HUSKY Hypet300 HPP5 P100/100 EE100E 18.000 preforms/h (PV 14,6gr) max. 72 cavities; screw diam. 100mm; max. screw speed 108rpm; stroke 400mm; max. melt pressure 25367psi; incl. viscosity monitor PTI; incl. Plastic Systems DM20L volumetric dosing unit (2018) and PS desiccant hopper MOQOP (2018) and temp. unit HPP5H300; incl. Plastic Systems DSH 3003-C-INT 5.0 coolpik mould dehumidifier; incl. Plastic Systems TB-SD300 double softdrop unloader; NO MOLD INCLUDED max. 400V/172A; total machine dim. L13000 x W4000 x H27500; own weight total 22t; meter reads 7.416/16,6mio pressings exworks EUROPE

Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS

(BEING NEGOTIATED) HUSKY HYPET AE 230 RSE 80D/80 + MOLD + AUX inc CHILLER OCT 2013 Mold : 14g x 48 (30mm neck for water) cavity (HUSKY) Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FASTEST DELIVERY MUST GO ASK FOR VIDEO WILL NOT LAST LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2008 21.7g 96cav mold Expected delivery July2023 Can be inspected and seen in production

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2010 Expected delivery July2023 Can be inspected and seen in production

HUSKY HPETL230E-RSE95D-95 + 48 CAV HOT RUNNER + AUX inc CHILLER DEC 2015 Mold: INCLUDED (HUSKY) ATTENTION NO COLD HALF INCLUDED Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FAST DELIVERY LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 70k Motivated seller

2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 77k Motivated seller seller offer No. resale 070623B

WILL NOT LAST Husky Hypet 300 P100/110 E100 year 2010 working hs approx 65.000 Condition In production Availability Immediate Auxiliaries Resin dryer with hopper and Mold dehumidifer Cavities 72 Mold YES 2925 water short 12g and 13g 3025 water long/milk 13g 14.5g 15.5g 17.5g ask for info and dont delay

USED in working order HMI for Husky PET and conventional injection molding machines All Husky models manufactured between 1998 and 2005 Brand Xycom Automation Model 9960 Part number 726619 Voltage 100-250v Frequency 50 and 60Hz Made in USA

Used pet food production and packaging line made by Waldner. New 1995.

for the production of 27,000 bottles per hour. With shape

for production up to 28,000 bottles per hour. Good condition. Can be supplied with mould

Brand manufacturer: SIDEL Type : SBO 6/10 Serie 1 Machine currently in overhauling process Capacity: 7.200 BPH Number of moulds: 6 Equipped : quick change for shell moulds Oven type : linear with 10 heating modules Neck personalization: PCO 28 in 1810 can be modified to yours Machine equipped with: - Sidel preforms hopper & feeder - Sidel electrical cabinet - optionally we can supply new molds as per your drawing The machine will be supplied after overhauling with guarantee.

Key data: 5000 kN, 3845 g/PS, 120 mm

Husky SX500 running 96 cavities molds not in production since Feb 2024 120mm screw 3845cm3 shotweight manufactured June 1995 between bars 920x920mm

Magazine tubes for PET strapping Format: 16x33x0.6 mm 2500 Pieces / Box 6 boxes in stock

description: For Ref PET/ PET cycle High performance is possible, ejecting bottles from overhead crates. The bottles are then collected in a container. Ready for squeezer. Price on request Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We a ...

Peugeot Citroen PSA HM01 1.5 VTI engine parts. Parts taken from one petrol engine with ca. 50.000 km. Parts are: motor head, main block, pistons, main shaft, oil pan, oil pump and all bolts.

Krones Air Conveyor diverter from 1 to 2 for PET air transport

Key data: 132 , 40 , 750

Year of construction 2015 Capacity: 750 m³/min. Delivery pressure: 40 bar Rotation speed 330 rpm. Electric motor 132 kW incl. refrigeration dryer The PET compressor is in mint condition, with few operating hours

Key data: 90 , 40 , 510

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air re ...

PET machine for items up to 1.5 ltr. Equipped for PCO 1881. Moulds in 500 - 750 - 1,000 - 1,500 ml optionally available. Voltage 400V 50Hz. Power for bottles in 1,500 mL. 21,115 per hour. Machine can be viewed in operation

Injection moulding machine for PET preforms

Injection moulding machine for PET preforms

Cup printing machines

Container Size (Max.): 2,5 l

Injection stretch blow moulding machines for PET bottles

A Strautmann plastic briquetting press is available. Pressing force: 300kN, hopper type: TS 1600, system dimensions X/Y/Z: approx. 6750mm/1900mm/2750mm. Documentation available. An on-site inspection is possible.

AVE UNIBLOCK 16/16/4 Bottle fillers. However, I can suggest common features found in similar bottle filling machines, which may include:, - Filling Type: Gravity, Pump, or Gravity/Pump combination., - Production Rate: Typically measured in bottles per hour or minute., - Number of Filling Heads: In this case, it could refer to a 16-head system, meaning it can fill 16 bottles simultaneously., - Bottle Size Range: Specifications may include the range of bottle sizes the machine can handle., - Control System: May involve PLC (Programmable Logic Controller) for operations., - Material Construction: Stainless steel or food-grade materials suitable for hygienic applications., - Dimensions and Weight: Overall dimensions and weight for installation considerations., - Power Requirements: Voltage and power consumption details., Bottle Sizes: 250 ml, 500 ml, 1 Litre , 2 Litre , Cap Size: 38 mm, Capa ...

Used Used Husky preform press: Year: 1989 Condition: Good USED HUSKY PREFORM PRESS Year: 1989 Model: XL225PET Press to 32 cavities Stamp: 31,8 Gr (made by husky in 2010) Safety protections Code: W 95 More details: https://bottlingscout.com

Complete Glass Bottling Line for Hot Fill & Cold Fill (Krones / KHS) - Capacity: up to 33,000 bottles/hour (500 ml glass bottles) - YOM: 1999-2007 - many upgrades, see below! The system offers maximum flexibility, allowing hot fill, cold fill, still and carbonated beverages, and multiple bottle sizes. Important: The filler can also be used for PET bottles, offering additional production flexibility. Key Technical Data - Bottle Types - Glass bottles (non-returnable) - PET bottles can also be filled Bottle Sizes - 250 ml – 1000 ml Products - Fruit juices (orange, apple, tomato, etc.) - Hot fill beverages - Cold fill beverages - Carbonated soft drinks (CSD) Capping Types - 28 mm aluminium cap - 33 mm aluminium twist-off cap - 43 mm aluminium twist-off cap - (Twist-off capping machine included) Labelling Options - Paper labels with cold glue - Optional ...

Manufacturer: Weightpack S.r.l., Goito (MN), Italy Model: WSFC 32/24/6 – 141 NH ESL Serial number: WL 0289 Year of manufacture: 2010 Type: Rotary filling line for high-hygiene dairy products Version: ESL – Extended Shelf Life 32 sterilization stations 24 filling stations Capacity: Sterilisation of containers using H₂O₂ Precise volumetric or gravimetric filling technology Max. 12,000 l/h for 1-litre format (see photo above) -> in practice, we produced at 7,000 l/h

Used line for packaging tablets and capsules in PET packaging Line composition: 1. DT PACKAGING SYSTEM UNSCRAMBLER1000S rotary sorter 2. DT PACKAGING SYSTEM CONVEYOR CONTROL conveyor for counters 3. DT PACKAGING SYSTEM CONVEYOR CONTROL conveyor for counters 4. B8P/3DUPLEX counter 5. B8P/3DUPLEX counter 6. Elevator 7. ML657 cap setter 8. Desiccant hopper 9. Cap hopper 10. PACK SERVICE PREALIMENTATORE lid elevator 11. PACK SERVICE TAVOLO ROTANTE PS160 buffer sorting wheel 12. PACK SERVICE TAVOLO ROTANTE PS160 buffer sorting wheel 13. Neri labeler SL200 14. Marchesini MA155 cartoning machine 15. Type C Transporter

Centering Machine - Speed 1390rpm - Power: 0.55KW - Connection voltage 380Volt - Centrically clamping vice - Collet holder - Base frame Auction-ID: A7-46460-441

Technical details Manufacturer: PETROFER (Hildesheim, Germany) Model: P200 Type: Release agent dosing / spraying units Configuration: 2 units mounted on pallet System components per unit: - Stainless steel tank (chemical reservoir) - Electric pump system - WILO Fluidcontrol module (230 V / 50–60 Hz) - Pneumatic / fluid distribution manifold - Hoses and dosing lines - Pressure and flow control components Application: Release agent dosing and spraying for die casting and industrial processes System: Multi-line dosing configuration (automated distribution) Material: Corrosion-resistant construction (stainless steel tanks) Condition: Used, with dust and wear; functionality untested Dimensions and weight (approx.) Length: 1200 mm Width: 800 mm Height: 1100 mm Weight: 300 kg (total) Auction-ID: A7-46498-169

USSR 2x 1991 Moscow and St. Petersburg st, 1 Kopeka - 1 Rouble

25 valves Filler Bertolaso for PET and glass (18 mm, hot filling ecologic with HEPA filter) (1998) Capacity: approx. 6000 bph different format parts Optional ID6103 - 24 grippers Rinser Procomac for PET and glas ID6011 - Screw capper Bertolaso 28 mm for PET (Plastic) (1998)?with screw cap feeding

Coin Set Russia 1996 St. Petersburg 300th Anniversary Russian Fleet 1 K - 5 Rubles st Y504-509 6 Pcs.

Type: Petrol Cut-Off Saws / Disc Cutters Brand: Makita Quantity: 2 units Execution: - Handheld petrol-driven cut-off saws - Suitable for cutting metal, concrete, and stone - Integrated blade guard - Manual recoil start - Front and rear handles Equipment: - 2x cut-off saws - Mounted cutting discs (condition unknown) Condition: Used Auction-ID: A7-45993-98

Type: Strapping Tool Set / Banding Tool Kit Brand: Petitjean Model: Troyes – France (as visible) Execution: - Complete manual strapping / banding tool set - Delivered in original plastic transport case - Foam insert with dedicated tool positions Scope of delivery: - Ratchet type strapping tool (A) - Cutter / tensioning pliers - Crimping tool - Hammer - Assorted metal clips (in bag) - Operating instructions (FR/EN) Application: - Strapping of pole bands - Suitable for steel banding applications Condition: Used Auction-ID: A7-45993-100

to fold Finished dimension: 1610330180mm stable design Quantity: approx. 180 pcs Auction-ID: A1-46862-156

420 cc engine Rated pressure of 4400 PSI Nominal pressure 303 bar 4.0 GPM rated current 4 spray nozzles 1 soap nozzle 15.24M Braided High Pressure Hose 33 cm Never Flat tyres Unused. Auction-ID: A1-40256-87

Type: Petrol engine driven welder-generator set Manufacturer: Mosa / Novellini Model: WS 220 TDC / EW220TDC Engine: Briggs & Stratton Vanguard petrol engine Generator output: 6.5 kVA three phase Single phase output: 3.5 kVA Welding current: 40 - 220 A Voltage: 230 / 400 V Frequency: 50 Hz Speed: 3000 rpm Phase: 3 phase Control panel: Welding current selector, industrial sockets and generator mode switch Cooling: Air cooled Condition: Used condition with scratches, paint damage and traces of corrosion Remarks: Mobile combined generator and welding unit mounted in tubular steel frame; functionality not tested Auction-ID: A7-45990-92

Type: Petrol engine generator sets, 2 units Manufacturer: Everpower / Configuration: Portable frame mounted generators Engine: Air-cooled petrol engines Output voltage: 230 V Sockets: 2 x 230 V sockets per unit Control panel: Voltmeter, breaker and DC 12V output Cooling: Air cooled Condition: Used condition, functionality not tested Auction-ID: A7-45990-93

Petrol leaf blower HUSQVARNA 125B, S/N 20131400319

Equipped with: Wacker Neuson BH 13 petrol demolition hammer/breaker from 2010 with machine/serial number 220804, version 100, own weight approximately 24 kg, 2-stroke petrol engine 1.8kw, manually operated pneumatic/percussion hammer function for demolition and demolition work. with extra attachment. Auction-ID: A1-41997-90