filler krones used for sale

Filler/sealer Make: KHS Type: Innofill DR 132/ 24/24 Built: 1996 Power: 50000 Fl./h Filling product: ier Bottle size: 0.5 glass bottle Bottle diameter: 78mm Number of filling valves: 132 Number of locking devices: 24 SV (Alcoa), 24KK ( KHS) Running direction: Left-right Control: Siemens S5 - Fill height adjustment - Cork mill - Extended pre-table - CIP tulips currently still in operation, can be visited, available from 01.03.2020

Number of decks: 1, total number of zones: 12, number of pairs of regenerative zones: 3, number of pasteurising zones: 5, number of separate cooling zones: 1, number of tunnel modules (without infeed and outfeed module): 12, pump side: right, belt load: 152.6 kg/m², max. belt load: 260kg/m², throughput capacity at 0.15l, 0.25l: 65,000 cans/h, with documentation, on-site inspection is possible.

Format: 0.2/ 0.7/ 1l.

Filler/sealer Manufacturer: KHS Type: VVF 126/14SV/14KK Built: 1981 Power: 30000- 35.000 Fl/h Number of filling valves: 126 Number of closing bodies: Show sealer (Zalkin) : 14 Crown Corker (KHS): 14 Running direction: left/right Control: S7 Bottle size: 95mm, length 240- 340mm Mandatory processing commitment only after sending all types of bottles to be driven Height adjustment: automatic Control panel on the filler Little traces of wear, as until now mainly bottled in PET bottle Outdated

Make: Krones Type: TOPMATIC Built: 1996 Capacity: 55000 bottles/h Bottle size:: diameter adjustable, height 198 mm Bottle type: 0.5l glass bottle Labelling: 3 aggregates, abdomen, neck, back Machine division: 125 Number of bottle plates: 45 Used manual grease lubrication Paper label with wet glue Label control Centro Automatic performance adjustment

Max. output: 40/min, with capper, filler, inspection and inkjet printer.

Dairy Mschinery UK now offers new Glass Bottle Fillers for Milk and Juice. We offer machines for Hot fill and Cold Fill. Our bottle capacities are between 1000 - 7000 bottles per hour. Manufacture : Dairy Machinery UK Volume : 500ml - 1000ml Capacity : Option on order between 1000- 7000 bph Capping : 38mm magnetic capping chucks Filling Nozzles : Gravity Filling on Rubbers Lift and Fill or Gravity Filling Drop and Fill Cap : Aluminium Screw Cap CIP : Available Controls : Control panel Standards 2019 Certified : EC certificates Installation : We install all our machines at the clients facilities. Warranty : 12 months Spare Parts : spares@dairymachineryuk.co.uk

Make : Rothenburg Filling Volumes : 5kg -25kg Hourly Outup : 5 Tons Cleaning : CIP Condition : To be Refurbished

Compounding system with underwater granulation. Material: PE, PP, PS, ABS (+ fillers) // Details: DC motor, DC rotor, segmented screws (2x x 70 mm / 40D) and cylinders, degassing, vacuum pump, stuffing unit, backwash screen changer GNEUSS RSF 150, underwater granulation GALA with cutting rotor, water circulation system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization. Available at an additional cost: Sidefeeder, 4-fold gravimetric dosing system. (Ref. No. G27615.2)

Compounding plant Material: PE, PP, PS, WPC + fillers / Details: segmented screws and cylinders, three-phase motor 250 kW, dcrunner, screw speed: 300 rpm, degassing, 2x busch vacuum pump, side feeding Berstorff ZSFE 120 SO, metal separator, noise protection hood, ECON air granulating system ELG 3000, control: SIEMENS S7 with visualization. Up for a surcharge: extension to 40D possible

Compounding extruder Material: PE, PP, PS, ABS + fillers / Details: dcising, segmented screws and cylinders, degassing, vacuum pump, screw speed max. 300 rpm, DC motor 252 kW, heating power 98 kW, incl. side-feeding Leistritz LSB 90 (screws 2x x 90 mm, drive: 3.0 kW, screw speed: max. 150 rpm), Macromate SPS visualization. (attached photos are BEISPIELBILDER)

Filling machine RCM for oil – 1998: Yea: 1998 Producer: RCM Direction Clockwise Technical Details -Machine suitable for olio -Filler RCM 16 valves for oil -Working machine Code T 11

• Filler BERTOLASO mod. AMBRA 30/40 – Low vacuum for still wine: • Year: 1990 • Producer: BERTOLASO • Speed (BPH): 6.000 bph • Direction: Clockwise • Used filler BERTOLASO 40 valves with low vacuum filling for still wine. • Mechanical bottle lifting pistons. • Bottling machine all in stainless steel. • Safety protections. • Control panel. • Code T 36

• Filler 36 valves VIRMAURI mod. MUTINA – isobaric: • Year: 1997 • Producer: VIRMAURI • Speed (BPH): 5.000 bph • Direction: Clockwise • Used filler VIRMAURI 36 valvole - isobaric. • Speed: • 4.000 bph for sparkling and 5.000 bph on still wine. • Code T 33

• Filling machine COBERT mod. OLIMPIA – 6.000 bph: • Year: 1994 • Producer: COBERT • Speed (BPH): 6.000 bph • Direction: Counterclockwise • Gravity filler. • Height adjustable bell. • Safety protections. • 2 cylindrical bottle formats. • Code T 28

KHS Seitz Champagne Filler 18 000 b/h Natural cork, 63 fillers

Filling machine COBERT mod. EXACTA – 4.000 bph: Yea: 1976 Producer: COBERT Speed (BPH): 4.000 bph Direction: Clockwise -ISOBARIC FILLER WITH 32 VALVES. -Isobaric FILLER COBERT model EXACTA. 1) Isobaric filler with 32 valves. 2) Complete of equipments for cylindricals bottles. Code T 13

Krones Contiroll HS Labeller 50 000 b/h

Filling machine ALFATEK 28 valves isobaric – 5.000 bph: Year: 2004 Producer: ALFATEK Speed (BPH): 5.000 bph Direction: Clockwise -RECONDITIONED MACHINE 1) Isobaric filler Alfatek 28 valves. 2) Complete of self levelling. Code T 10

Krones Natural Corker 6 heads

Labeling machine Krones Contiroll Capacity: 15-18 000 b / h. After extensive renovation and modernization, control the latest Siemens S7 1500 series. A simplified version of the central computer control. 18

• Filling machine CORTELLAZZI 32 valves isobaric – 2.800 bph: • Year: 1996 • Producer: CORTELLAZZI • Speed (BPH): 2.800 bph • Direction: Clockwise • Machine in good condition • Isobaric filler Melegari • 32 valves • Self levelling • Safety protection • Code T 1

Krones Canmatic labeling machine Capacity: 24,000 b / h

sour cream filler in plastic cap fi 75, manuf. by Waldner Dosomat 2,4 Germany. Manuf. in 1998 but in very good condition. Capacity 2.000-3.000 cups per hour. The filler includes cups feeder, aluminum foil capper and date printer. Siemens 5 PLC controller.

GAI vacuum filler + 1 screwdriver head Capacity: 18,000 b / h - 20 ml, 12 fillers

Modular station Krones Contiroll HS

capacity: approx 3.000 crates / h - incl. platform - incl. two crate turners Presently equipped for crates running long side leading. Maximum crate width: 410 mm Conversion to crates running short side leading possible.

Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!

Labelling machine Krones Vinetta Y.O.M. 1994, li-re, 6 plates, 1 wet glue unit, Ma. no. 721-536, container 0.7 L VdF hull, 1.0 L VdF fuselage + chest, 0.2 L VdF fuselage. Machine can be visited on site. Age-appropriate condition.

Technibag B BOOSTER Bag in box filler Fully automatic filling machine for soft bags and / or POUCHS (stand-up bags) Carton format: 2 L to 20 L Description of the machine: Measures and weight: Length: 1880 mm Width: 1130 mm Height: 2100 mm Weight: 370 kg Liquid flow rate: 80 hl / h - Connection: diameter 40 Macon Compressed air supply: 7 to 10 b - flow: 7m3 / h. Connection Type Rectus 26 Nitrogen supply: 1 to 4 b-flow: 1m3 / h. Connection Type Rectus 26 Power supply: 400v - 3p + neutral (N) + earth (E) - power 0.7 Kw Pulse counter: Electromagnetic counters Noise emission:

PET Empty Bottle Inspector HEUFT InLine TI 60 BFS2-r Device No. 2SG021663 Built: / year of construction: 2006 Output[B/h]: / performance [cont./h]: 36,000 Flow direction of: / moving direction from: Direction: / rejection direction: Installation location: / installation site: In front of the filler • Basic unit: Empty bottle inspector • Inspection: 1.Soil-IN-r • Inspection: Estuary IN-r • Inspection: 1st sidewall IN-r • Inspection: 2nd sidewall IN-r • Inspection: SW double resolution-r • Inspection: Carrying ring/PET-r • Inspection: RefPet abrasion-r • Inspection: RefPet Ventslot-r • Inspection: Stress crack detection-r • Accessories Transport belt: Height adjustable • Residual fluid detection: IR • Height adjustment: for discharge • Cross-adjustment: for discharge • Discharge ...

Capsule Filler Encapsulator 400 caps/min. 24.000 caps/h

Equipped to handle the following pallets: - EURO pallet 1,200 x 800 mm - Industrial pallet 1,200 x 1,000 mm Very good condition.

Capacity: 4.000 crates / h (at palletizer / depalletizer) Presently equipped for: Bottles: 0,50l GdB Kropfhals 0,70l Zwiebelhalsflasche 0,75l Heilwasserflasche 1,00l GdB Leichtglasflasche 1,25l GdB Leichtglasflasche Crates: GdB crates with 12 bottles, short side leading GdB crates with 20 bottles, short side leading Pallet: EURO pallet 1200 x 800 mm consisting of: 1 Depalletizer make: Kettner type: Pressant Duplex 2NT 1136 year: 2000 1 Palletizer make: Kettner type: Pressant Duplex 2NT 1176 year: 2000 1 Pallet Pressure Control make: Kettner year: 2000 1 Empty Pallet Magazine make: Kettner type: ST year: 2000 1 Empty Pallet Magazine make: Kettner type: ST/EST EURO year: 2000 1 Pallet Destrapper make: Born type: PAE year: 1986 Crate Conveying System make: Krones type: Multico ...

Used Stork monoblock. 32 fillers and 8 screw heads. For PET bottles. Dose adjustment on the pistons.

Autom. filling machine (inline filler, 8-positions) for liquid products. Dosing volume: 50 to 1000 ml. Output: up to 4000 units / min. PLC SIEMENS Simatic S5. Machine comes with a lot of spare parts and accessories.

Type: Robot 500 Continuous vacuum filler for straight filling and portioning Integrated vacuum pump Double screw Standard double screw housing Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 70 Lenght: 80 Height: 155 Delivery time: after advanced payment machine is generally refurbished and ready for delivery

Qty. 1 Second-hand blower and PET filling line Mfc.: SMI, SARCMI, KOSME, EC-JET, SIMONAZZI, ZAMBELLI, PROCOMAC, ACMI, ATLAS, SIAD, ASKI, SIDEL Built: 1976 – 2012 Plastic Cap Product: Still & sparkling water Capacity: 12 000 bottles/hour Scope of supply: Blower machines Filler Labeller Conveyors Shrinkwrapper Palletiser Compressors Chiller Dryer

1 used Framax Tribloc bottle filler, built in 2012, consisting of Borelli 9-digit rinser and 8-digit low vacuum / gravity filler type CIAO-xp with 1-digit Arol Eagle C 26 mm crown corker. Plant last used for filling beer (bottle fermentation) in 61 mm diameter 330 ml as well as 71 mm diameter 500 ml glass bottles at an output of 1,920 bottles/hour. Filler also suitable for bottling wine.

1 of used Framax tribloc bottling machine, new 2012, consisting of a Borelli 9-head rinser / 8-head low-vacuum/gravity filler CIAO-xp with single-head Arol Eagle C 26 mm crowner, Last running bottle-conditioned beer at 1.920 bph with handling parts for 61 mm diameter 330 ml and 71 mm diameter 500 ml glass beer bottles. Filler also ideally suitable for bottling wine.

1. Qty. 1 Second-hand labeller Mfc.: Krones Type: Universella 723-931 Built: 1993 15 labelling stations Number of labels: 8 labels per bottle Number of grippers in the cylinder: 6 Capacity: 18 000 Btl./h Size of bottles: 0.5, 0.7, 0.75 & 1.0 Ltr.

2. Qty. 1 Second-hand labeller Mfc.: Krones Type: Universella 723-844 Built: 1991 10 labelling stations Number of labels: 4 labels per bottle Capacity: 12 000 Btl./h Size of bottles: 0.5, 0.7, 0.75 & 1.0 Ltr. 2 glue stations

Qty. 1 Second-hand carusel Monoblok filling line Mfc.: Stork Bepak B.V. Built: 1992 Type: VS 60/110/12LV Capacity: 20 000 Btl./h No. of filling stations: 60 pieces No. of closing heads: 12 pieces Size of buttles: 250, 500, 700 & 750 ml Inspector checking the fill level and cap Very good condition!

Labeling machines fully automatic Krones Etima Solomatic Machine Krones Labeliernaschine Solomatic Chest torso back 3- leimagregate 3- cold glue pump Power 28,000 FL/h Control Siemens S7

description: Various scond hand crate conveyors Krones/ KHS/ Gebo for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 440m used case conveyors (predominantly Krones,KHS, and Gebo). Available immediately. When buying items we always pay attention on famous manufacturers an tough quality . Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of cou ...

Vacuum filler Handtmann Type: VF 610 Hopper capacity: 40 x 100 (liters) Filling capacity: 3000 kg / h Stuffing pressure: 35/50 bar Porting speed: portions size 25 - 450 portions / min portions size 50 - 375 servings / min portions size 100 - 280 servings / min portions size 200 - 190 servings / min Power: 3.5 kW Weight: 475 kg net External dimensions: 120 x 122 x 204 cm Year of production: 2006 The stuffer can work with all popular types of casings: natural casings, collagen Clipper Poly-Clip Type: PDC 700 For calibers with a diameter of: 30-115 mm For all covers: Plastic, fibrous, collagen and natural Mobile machine: on a trolley We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Plant No. 123.035 Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 2 years Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon w ...

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 12 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gau ...

Machine type MIG/MAG inverter welding system with bi-power setup Make Merkle Type MobiMIG 280 K - BiPower Connection voltage 230/400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Bi-Power Setup Weight 27 kg Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reduc ...

1987 Krones Starmatic with many parts