filler cup used for sale

The line consists of: -Schmidt, year of construction: 1997 -Mixer, output: 5000b / h -Filler XRB 16, year of construction: 1997 -Screw ZX01, year: 1997 -Labeller KRONES PASANTA, year: 1997 -Tunnel packaging PPX 030 K, year of build: 2006 Power: 3000 packing/h

Complete filling line for disinfection fluids I have for sale a complete filling line for still fluids such as: disinfectants, chemical compounds, technical fluids or water. On this line 0,33 l – 6,0 l containers or bottels can be used. The line consists of: 1. Filter; 2. Container for fluids, volume ~800 l; 3. Pump; 4. Non automatic washer for used containers/bottles; 5. Gravity flow filler, with 8 separate filling nozzles; 6. Single cylinder Capper; 7. Labeller; 8. Collective table; „as it stands” EXW Kędzierzyn-Koźle Our Company offers conveyors – new and used. In case of further question please do not hesistate do call or mail us.

Vemag Vacuum Filler Model Robot 500 With portion control and straight fill, two auger feeds, large hopper capacity. Stainless steel construction, very tidy condition. Offered in good working order

Complete filling line for disinfection fluids I have for sale a complete filling line for still fluids such as: disinfectants, chemical compounds, technical fluids or water. On this line 0,33 l – 6,0 l containers or bottels can be used. The line consists of: 1. Filter; 2. Container for fluids, volume ~800 l; 3. Pump; 4. Non automatic washer for used containers/bottles; 5. Gravity flow filler, with 8 separate filling nozzles; 6. Single cylinder Capper; 7. Labeller; 8. Collective table; „as it stands” EXW Kędzierzyn-Koźle Our Company offers conveyors – new and used. In case of further question please do not hesistate do call or mail us.

Qty. 1 Second-hand paper mill Mfc.: Valmet , METSO, Voith, Honeywell, Siemens, Ahlström Sulzer, Clark & Vicario, Andritz, Alfa Laval, GL & V Hedemora, Beloit, Tampella, Built: 1971 Rebuild: 1990 & 2004 Product: Uncoated magazine paper Production capacity: 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Headbox Mfc.: Valmet Type: OptiFlo 2 with dilution profiling (2004) Wire section Mfc.: Valmet Type: OptiFormer LB (loadable blades) (2004) Press section Mfc.: Valmet Type: SymPress B with 4th press (1990/2004) – shoe press in 3rd nip (2004) Drying section Mfc.: Valmet Type: SymDry (1990) – 4 single tier drying groups 2 double tier drying groups – ropeless tail threading (1990/2004) Max designed structural speed of parts rebu ...

Vacuum filler Robby, filling, portioning, linking, pc control. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Cat.-No. 14-00218 PET line for still and carbonated beverages Format: 1.5 L, production capacity: 20,000 bottles / h in a very good condition Year of construction: 2001 working hours: 42.389 the plant built up yet, but is currently out of operation Machine manufacturer year details Blow moulding machine SIG BLOMAX 16 2001 including molding water inlet, elevator and hopper, cooler (Rahim) Molding m Tanner VZT 3000 dosing system 2001 air transporters 2001 buffer tank 14 m³ Alfa Laval 2001 short time pasteurisation KHS Innopro KZE 2001 330 HL / h Triblock (Rinser, filler, Capper) KHS Innoclean/Innofill 120/10 2001 volume filler Capsule conveyors with supply tank Filling height control HEUFT basic 2001 labeller KHS Anker 2001 label control HEUFT HBF 150000 ST 2001 laser encoder video Jet 3430 2001 shrink film Packer SMI SK 800 T 2001 tray Packer in 6 Pack film (50 ppm)  ...

The fishing and packing plants have a simple and this stable and torsion-free construction. The machines are characterized by ease of use, flexibility, reliability and low maintenance requirements. The CAMBORIT clip has a capacity of up to 125 packs / min. 1 x 2 bottles can be packed with the CAMBORIT clip. To do this from flat so called "bars" cut to shaped, that get caught under the edge of the bottle. The machine can be operated automatically or manually. Display and operating elements are located on the control panel. All functions are controlled from the control panel and controlled. Errors of the cycle are displayed on the control panel. Action: At the beginning of production the magazine must first cut to be filled. The minimum level is cut to the magazine below, the machine will not turn on. After switching on the machine when existing minimum level of bottles with a capac ...

Steel platform with ladder, steel construction, machine platform, steel scaffolding used Manufacturer: EHINGER IMPIANTI Height to platform approx. 4.2 m + 1.1 m railing Pedestal 1.7 x 1.9 m Ladder with back protection Dimensions total approx. 1.7 x 2.7 x 5.3 m The system has already been dismantled. Any machines and devices that can be seen in the pictures are not part of the scope of delivery. We only offer the steel construction here. The construction was part of a glass recycling plant in which foam glass bulkowas was manufactured. We sell the complete plant with belt furnaces, cup plants, silos, crushers and mills. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Used vacuum filling machine made by SEN. 45 fillers. Glass bottle 1L, 0.7L, PET bottle 1L. Capacity 10000 liters/h. Adjusting the dose to the pistons.

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Basically, other brittle material ...

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Originally, the recycling of fluo ...

Brewery museum Beautiful restored collection of historic brewery equipment, as for example copper sprinkler system cooler, bottle filler, mass filter, barrel filler and much more.

Filling valves for pressure filler O + H

Screw caper heads d 28 aluminium from SIMONAZZI filler

Bottle filler for the semi-automatic filling of liquid products. Suitable for products such as milk, juices, oils, spirits, etc. (all liquid products) in cups, bottles, canisters, cans or similar containers. The to be filled container is placed under the filling head, the product is sucked through a tube from the filler and discharged volumetric. Full pneumatical version without electronics. The filling pulse is triggered via a pneumatic foot switch. Replacing the foot switch with pneumatic components such as a photocell or an external pulse, this filler can be integrated in existing systems. Capacity: 600-1.800 filling strokes per hour (depending on e.g. by product volume, filling speed, operating personnel, etc.) Number of filling stations: 1

Frey Heinrich 20 piston filler, 20 liters piston filling machine, including filling pipes. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Bottle filler for the semi-automatic filling for pasty products. Suitable for products such as e.g. yoghurt, oils, cosmetics etc. in cups, bottles, canisters, cans or similar containers. The to be filled container is placed under the filling head, the product is sucked through a tube from the filler and discharged volumetric. Full pneumatical version without electronics. The filling pulse is triggered by a pneumatic foot switch. Replacing the foot switch with pneumatic components such as a photocell or an external pulse, this filler can be integrated in existing fullautomatically systems. Capacity: 600-1.200 filling strokes per hour (depending on e.g. by product volume, filling speed, operating personnel, etc.) Number of filling stations: 1

Used UHT milk packaging line with a capacity of 5000 pcs./h. Possibility of pouring in packaging 0.25 L, 0.5L, 1L. New 1996. The line consists of the following order: 1. Filler from SIG Combibloc 2. The applicator straws 3. The applicator fitmentów (pouring beaks) 4. Cartoner 5. Foil machine 6. Transporters

PET filler 120 digits

Qty. 1 Second-hand blower and PET filling line Mfc.: SIG (Germany), KHS (Germany), Robopack (Italy) Built: 2006 / 2007 Stopped: 10 / 2020 Product: Beer Cap type: PCO 1881 Technical Data 1. Blowing machine Mfct.: SIG Type: Blomax 6 Year: 2007 Cap Type: PCO 1881 PLC type: ABB controller Consisting of: Blowing machine pre-form feeder (without tipper) chiller (Mfct.: Riedel, 2007) Capacity: at 2 litres: 8,400 bottles / h at 1.5 litres: 10,500 bottles / h at 1 litre: 10,500 bottles / h 2. Filler Mfct.: KHS Type: INNOFIL EM/125/R/PET 54 / 9 / Rinser 36W Year: 2007 Total working hours: 90,000 Product: Beer Cap type: PCO 1881 Consisting of: Rinser, Filler, Capper (incl. cap feeding system) Cap feeding system: Mfct.: Hormes, Year: 2007 3. Cleaning system / CIP station Mfct: KHS Type: Innopro – CIP Year: 2007 Consisting of: Stainless steel tan ...

Pad printing package: Machine 1: Manufacturer: Massek Model: Pad Printer PP150 14 recordings Carréband Year: 2000 Flame treatment plans: Arcotec FTS 101 P Year: 2000 incl. Cable, burner, connections, devices and wall bracket Machine 2: Manufacturer: Massek Model: Pad Printer PP150 14 recordings Carréband Year: 1997 Flame treatment plans: Arcotec FTS 051 D Year: 2001 including cables, torches and connections, devices and wall bracket Equipment: Closed system 4-fold: cliché size 200mm x 100mm Pot diameter 90mm 4 ceramic pots 8 squeegee cups 50mm high 5 squeegee cups 20mm high 3 magnetic holding plates Drying belt: In length, including ceramic heating Flame treatment system (new, unused): HILL WF 10-0 Year: 2004 incl. cable, adapter, connections, burner Ink basin open 4-fold, cliché size 150mm x 450mm, ink squeegee 4 x 90mm Ink basin open, cl ...

A line for filling and packaging creams: 1. Inpucker for jars , type: FES201, producer: Groninger, year:2009 2. filler plus 1 mobile hopper, type: DFV 4005, producer: Groninger, year: 2005 3. Capper, type: MCS202L, producer: Groninger, year: 2005 4. Unscrambler cap, type:ZSK1200 ,producer: Groninger, year: 2008 5. Container and Elevator cap, type: DE120, producer: Groninger, year: 1994 6. Labelling cap, type: Gamma, producer: Promark, year: 2010 7. Depucker, type: Omikron, producer: Promark, year: 2010 8. Labelling base label,type: Gamma, producer: Promark, year: 2010 9. Labelling wrap label,type: Gamma, producer: Promark, year: 2010 10. Printer, type: Smart DateX10, producer:Markem, year: 2008 11. Inpucker, type: Paxinpacker, producer: Unilogo, year: 2010 12. Cartoning machine, type:AVV, producer: CAM, year: 2009 13. Mechanical turning  carton, Festo, year: 2011  ...

KHS Seitz high vacuum filler for vicous products Type: Seitz wich with 12 filling valves solo machine complete recondizioned

Vacuum filling machine Vemag Robby, filling, portioning, linking, pc control. The vacuum filler is currently in the refurbishment and you are very welcome to test the machine in Koblenz, Germany.

Wieland Suction Cup IS-30 T - Weight: 100 kg - rpm: 2895 - 3 kW - Space requirement: 600 x 1200 x 1200 mm Wieland Suction Cup IS-35 T - Weight: 90kg - RPM: 2895 Good condition fully functional can be visited and tried out on site. Shipping abroad. sightseeing: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

BERR filler SMB/Leibinger 18/6 with 18 filling valves and 6 head crown corker running direction: right-to-left year of manufacturing: 1989 with long filling valves/tubes with safety housing incl. CIP TULPS

Handtmann FA 30 Top piston filling machine, piston filler for filling, portioning and linking. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany

The SUPERBOX is a box butterfly that feeds, opens, folds, shapes the boxes and seals their lower part with adhesive tape. Its great versatility also lies in the possibility of using commercially available adhesive tape rolls. The machine consists of a cardboard magazine, an area where the cartons are opened and an output roller conveyor, on which the bottoms of the folding cartons are provided with adhesive tape. The format change is conveniently controlled via 5 handwheels, which is followed by an adjustment of the passport stamps of the cardboard magazine and the position of the suction cups. specifications Product dimensions: Length: 570 mm Width: 410 mm Height: 500 mm Min. product dimensions: Length: 250 mm Width: 170 mm Height: 90 mm Cardboard magazine for standard machine: 50/60 Operating voltage: 400V 3Ph+T 50Hz (others on request) Power consumption: 1 kW  ...

1 truck powder silo tank loading with 2 separate powder loading points and own scaffolding construction to absorb the technology and the Enclosure of the approximately 7 m high powders Loading technology with flow vessel and powder delivery Technology through a Safeline metal detector in the truck filler neck. with rope glide staircase to reach Floor 1 and Floor 2 with complete steel construction for Wall and roof construction 1 truck powder silo tank loading with 2 separate powder loading points and own scaffolding construction to accommodate the technology and the Enclosure of the approximately 7 m high powder Loading technology with feed vessel and powder dispenser Technology through a safeline metal detector in the truck filler neck. with a stairway to reach it Floor 1 and Floor 2 with entire steel construction for Wall and roof construction

brand new diesel petrol tank system comprising petrol station fuel tank fuel tank tank system home service station storage tank storage tanks Court gas station steel tank: 1. 10,000-litre tank according to DIN 6616/D, above ground, double-walled 1 pump type eco 55 description containers: New tank, 10,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. (Other sizes from 1,000 to 100,000 liters are available on request) The tank has two saddle feet, a manhole with domed lid and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fl ...

Vertical Bevel-Cutting Machine Manufacturer: Hyma Model: VSL.A.75 Manually operated roller table with aluminium covered table-too Hand-wheel operated rest-plate with ratchet mechanism for repetitive cutting of same width: 0-130mm Inclinable cutting section with four dynamic balance blade-wheels, each suspended between two adjustable bearings Motorised angle-adjustment for cutting section: +/- 60 degrees. Electric blade drive motor Twister double-edge ground bank knife for cutting in forward and reverse movement of roller table Blade tension control with indication lamp and automatic cut-off on blade slackness and breakage Manually height-adjustable blade guard and fine-adjustable blade guide rollers above and below table Friction grinding apparatus with two adjustable cupstones Electrical control box mounted on table front, adjacent to operator Standard dimensions: Cuttin ...

Tribloc Procomac / Ortmann & Herbst / Zalkin with Procomac rinser with 55 rinsing stations, Ortmann & Herbst Hansa B filler with 70 filling valves and 10 head Zalkin plastic screw capper incl. pick-and-place system The rinser Procomac will be blocked to the monobloc filler/capper by cardan capacity: approx. 18. 000bph based on 0, 5ltr. PET-bottle

Qty. 1 Second-hand paper mill for production of SC-A paper (Super Calendered) Mfc.: Valmet Built: 1971 Rebuild 1990 and 2004 Product: uncoated magazine paper Production capacity 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min 3 Super calanders 3 Winders Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Paper machine basic information Headbox Valmet OptiFlo 2 with dilution profiling (2004) Wire section Valmet OptiFormer LB (loadable blades) (2004) Press section Valmet SymPress B with 4th press (1990/2004) Shoe press in 3rd nip (2004) Drying section Valmet SymDry (1990) 4 single tier drying groups, 2 double tier drying groups Ropeless tail threading (1990/2004) CD weight control with dilution valves 2004, Metso DNA. Moisture profiling at press section with Measurex-Devron steambox 1992 (57 contro ...

Dimensions (L, W, H): 2, 60m x 1.05 m x 2, 00 m Which parts can be printed: soft drink / glass closure / 400 parts per minute Accessories:-42 roller 100 x 100, different motifs -2 printing units with 1 pressure tool (paint bucket, 4 color tubes, 1 colour Cup holder with paint tins) -2 knife holder -approx. 10 doctor blades 0, 5 mm / 5 squeegee blade 1 mm / 2 m Blade Knife roll 0, 2 mm -1 intermediate drying -2 light barrier -various sensors

Combined flat and cup grinding machine make KLAIBER type HV 2Masch. -No: 641 built in 1965Grinding area: 400 x 100 mmGrinding height: 200 mmCup grinding: 150 x 80 mmTable mounting surface: 500 x 150 mmmagnetic clamping plate: 300 x 150 mmHeight of the magnetic disk: 80 mmGrinding wheel size: 150 + 175 mmSpindle speeds: 3560/3360 rpm.Drive power: 1.5 hpWeight approx.: 430 kgWith- combined for horizontal and vertical use- Grinding wheel dressing device- wet grinding device- Suction deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Fuel tank - fuel tank - steel tank - tanks - used oil tank - tank system gas station - home station - storage tank - storage containers - farm service station - steel tanks 50.000 litres content - according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The tank is painted exterior green - no repainting. L = approx. 10.70 m / D = 2.50 m / weight CA. 9,0 tons. / free charged ex works.

1 pieces. tanks 30,000 litres, fuel oil tank fuel tank fuel station gas station home service station storage tank storage tanks Court gas station steel tank according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid, is used, cleaned, overhauled and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted RAL 7042 - traffic-grey. (Other RAL colours are possible upon request!) L = 10,00 m / D = 2.00 m / weight CA. 5,7 tons. / free charged ex works ...

– after technical inspection – very good condition – the ability to lay several stacks in one cycle TECHNICAL PARAMETERS: length of elements 3000 mm width of elements 1300 mm height of elements 1600 mm centering the element number of suction cups 20 pieces vacuum pump 1.1 kW lifting capacity 450 kg hydraulic material lifting pump motor 1.5 kW arm motor 1.8 kW number of cycles 12/min number of receiving rollers 48 height of rollers from the ground 280 mm adjustable suction cup spacing maximum spacing of suction cups 3000 x 700 mm Roll table from stapling: – width of rollers 1000 mm, – length 3750 mm, – slanted rollers, – number of rolls 31, – engine power 1 kW, – adjustable speed. Cross table from stacking: – length 320 cm, – width of rolls 110 cm, – total length of transverse belts 197 cm, – electrically adjusta ...

Used cup filling machine Brand: Benhil Type: 8206 capacity: -. Electric: -. Dimension: -. YOM: -.

BOTTENE – PASMEC moulding line for beads and planks, composed as follows: Automatic loader PASMEC, year 2005 : - PLC for work cycle programming - arm with suction cup system and vacuum pump - 1600mm useful stroke, brushless motor and prismatic guides - side aligners + pneumatic introducer pusher BOTTENE TARGET 606 moulder with 6 shafts, year 2017: – useful working measures 230x150mm – gimbal towing and differentiated pneumatic pressure – variable feed speed 6 – 60 mt/min with inverter – feed motor KW 7,5 – HP 10 – top feed wheel before the 1st shaft – group of tandem feed wheels in front of the 2nd shaft – overlapping feed wheels (top + bottom in the plane): at machine entrance, before the 1st shaft between the 4th and 5th tree at machine output, after the 6th shaft – short 1200mm entry plane – lubrication pump – protection cabin � ...

Used curd production line from OBRAM Olsztyn. Year of manufacture 2005. Line capacity 1400 kg/h. Packing machine: Multivac R 240 with BIZERBA CWM 6000 checkweigher. 2-track CIP washing station. Line composition: - UFO - Column forming device UF21 - Curd multiforms - 42 nests - Curd presses - 3 pieces - Pressing covers for curd presses - 3 pieces - Multiform swivels - 2 pieces - Multiform emptier - Multiform washer - Multiform magazine for 30 pieces - Multiform transport system - Tray filler - Trays for transporting cottage cheese - Trolleys for transporting trays - Multivac R 240 packaging machine - hard bottom film, soft top film, packaging with the possibility of multiple opening - Automatic constant weight control device BIZERBA CWM 6000 - 2-track CIP station WAB-30/2, OBRAM, 3 tanks with a capacity of 3,000 L

16 plates for filler Handtmann VF 80 , VF 200 , VF 300P - new cataog number 834403 Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

NEMESIS 9000 are high-quality, modern, by INNOVATEST developed and produced hardness tester. These versatile machines combine groundbreaking technologies and extensive facilities in a machine body with a modern design. The basic function of the hardness concept is based on a settled on the test piece nose cone's mounted a turret with up to 8 positions. The desired hardness test method can be choiceed conveniently on the large touch screen monitor by means of Visual, intuitive user interface (control and evaluation software IMPRESSIONS. Now, the operator presses START and starts the automated testing: -automatically the turret swivels the correct Indentor / lens -using search drive, the specimen surface is contacted and focused (Vickers / Brinell) -now the impression generated power-regulated -then the integrated image analysis software automatically evaluates the impression of h ...

FRECH DAK315H die casting machine manufactured in 1991 by the German company Oskar Frech Werkzeugbau GmbH + CO. KG. is designed for the production of castings by filling moulds with molten brass or aluminium. The reliable FRECH metal injection moulding machine with high-quality components works with casting moulds of a maximum height of 700 mm, which are closed with a force of up to 315 tonnes after being filled with molten material. Depending on the design of the choiceed mould, the aluminium die casting machine also allows for the use of an injection piston with a diameter of 40 to 80 mm. Previously, the machine used a piston with a diameter of 40 mm. The DAK315H aluminium die casting machine weighs approximately 14000 kg. Technical parameters of the FRECH DAK315H metal injection moulding machine - clamping force: 315 t (3150 kN) - injection force: 35 t (350 kN) - ejection for ...

Year of construction: 1980 Running direction: Left – right Pitch: 95 mm Siemens S7 controller, Danfoss frequency converter With a stainless steel control cabinet. Equipped with 3 sets of parts for the following bottles: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP capable. With electric height adjustment. Modernization and service by arrangement. The machine is in good condition and still in operation. A visit is possible by arrangement Year of construction: 1980 Working direction: Left – right Pitch: 95 mm Siemens S7 control and a Danfoss frequency converter. Installed in a stainless steel switch cabinet. Equipped with 3 bottle guiding parts for: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP able. Height adjustment of the filler bowl and closing machine by electrical gear motor. Reconditioning /  ...

With cup forming station for 15 cups Cup format: 33 mm x 51 mm, height variable depending on the weight Cutting dimension 41 x 59 mm with pull tab Volumetric dosing unit with 15 measuring points for 10 to 30 grams, weight adjustable. Product hopper approx. 50 litres Performance: max. 30000 cups/h depending on the product consistency is suitable for the filling of honey, butter, jam, etc. With carton packer Hassia. Used, complete overhauled.

Bakery shop fittings Aichinger ArtLine III sales counter 3.9 m shop counter bakery sales stand CoolMaxx HotMaxx CoolBottle, used from 11/2018 Type: ArtLine III Manufacturer: AICHINGER GmbH, Ostring 2, 90530 Wendelstein, Germany Purchase according to invoice: 11/2018 Properly and professionally dismantled and stored on pallets in our warehouse. Very good condition. Disc type: ARTLine OK 1252mm I ZP 330mm Countertop Type: Postforming APL Depth: 1060 Front Type: Decor APL Decor Edge: A1 MGM_Schwarz APL Postforming: G/A1 MGM_Schwarz Display: table-level Price bar: EV 1 Front décor top: E/H3395 ST12_Corbridge natural oak Front edge top: H3395 ST12_Corbridge natural oak Version: Standard (V20) Front profile: EV 1 Skirting board: EV 1 Pocket tray type: 1-tube/Waab CNS The shop fittings consist of: #Theke Free-standing end side for modules with glass attachment, ...

DIRECTLY FROM THE PRINT SHOP Komfi FULLMATIC 52 Painting machine - Paper size: max. 520x740mm; min. 200x250mm - Paper sheet basis weight: 115-350g/m2 - Paint specification: Grade: UV with viscosity of 30-64s (DIN 4mm flow cup viscosimeter) - application quantity: 4-15g/m2 - Painting speed: 5-30m/min Mooring head speed: 200-299mm max. 20m/min; 300-750mm max. 30m/min - Stacking height feeder: max. 480mm - Paint temperature: min. 20ºC - IR temperature: max. 80ºC - Floor area: 4.55m2 - Floor space: 1.4x3.3m - Dimensions: 3,300x1,400x1,300mm - Weight: 730kg If you wish, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer

Handtmann VF 628 vacuum filler with inline grinding system GD 93, filling, portioning, linking, monitor control, filling capacity 6.000 kg/h, pressure up to 72 bar, hopper volume 90/350 liters, arm lifting device, refurbished.