filler and capper used for sale

Workshop set with degreaser tray, oil collector, barrel rack and grease pump Specifications: Degreaser tray / parts cleaner Electrical connection: 220/230 V Degreaser tank dimensions: approx. 1,200 × 1,100 × 620 mm Oil drip tray with steel grid and barrel rack Dimensions oil collection tray/barrel rack: approx. 1,250 × 1,300 × 1,100 mm Manual grease pump with reservoir and hose Total lot weight: indicatively approx. 400–600 kg Features: Underlying vessel for cleaning/degreasing agent Oil drip tray with heavy steel grids Integrated steel rack/barrel stand Draining option Kramp Pangea Oil 15W-40 engine oil Various jerry cans, reservoirs and other workshop accessories visible in the photos Particularities: Sold as one complete lot. The remaining amount of oil and other liquids is unknown. Used condition with signs of use, oil and soiling. Operation not test ...

150 hL – 304 stainless steel flat bottom tank with casing This 150 hL 304 stainless steel storage tank is designed for winemaking and liquid storage applications in the cellar. Its simple and robust design, combined with a roof with a chimney centred, a rectangular door with external opening, a flat bottom with a boilard and suitable racking equipment, makes it a reliable and immediately usable solution to complement an existing winery capacity. Technical characteristics Material: 304 stainless steel Total capacity: 15,000 litres Roof 2 lifting rings 1 chimney centred with hatch Ferrule 1 ladder support bar 1 door rung 1 rectangular door with external opening 1 taster tap Flat bottom with boilard 1 stainless steel total drain valve on square flange 1 sludge without cap Dimensions Diameter: 2800 mm Height: 4000 mm Location: Civray Equipment sold loaded on truck: additiona ...

Equipped with insulated walls and roof 1 bedroom living room with corner kitchen bathroom with shower, toilet and sink each room equipped with lighting and sockets 230V meter cupboard PVC floor Aluminum windows and doors Lockable Water, electricity and drainage can be easily connected is prepared unused and transport is ready (transport dimensions 290x220x248 cm, weight 2500 kg) Auction-ID: A1-47450-1001

Agromec adjustable front weight with LED lighting Specifications: Brand: Agromec Product Type: Tractor Front Weight / Counterweight Condition: new / unused Color: green Mounting: front linkage Features: Width adjustable Adjustable side sections LED Lights Red/white reflective marker signs Integrated width/marker illumination Robust steel construction Front linkage connection Rounded housing Particularities: New and unused front weight. The width can be adjusted by the adjustable side sections. Equipped with LED lighting and red/white width marking on both sides. Execution and completeness according to photos. Auction-ID: A1-47395-409

Mori Seiki NT 5400 DCG - 1800 SZYear of manuf. : 2009 Control : Fanuc 30i (MSX-711) Turning diam. : 920 mmTurning length : 1800 mm____________Description:In General:Year of manufacture:2009Control system:Fanuc 30i (MSX-711)Max. turning diameter:920 (470) mmTurning length:1,800 mmBar capacity:103 mmMilling spindle:8,000 rpm, HSK 100Main spindle:RPM:2,400Max. power:37 kWMax. torque:1,432 NmC-axis:0.001°Chuck:SMW Autoblok KNCS 500-155Sub spindle:RPM:2,400Max. power:37 kWMax. torque:1,432 NmC-axis:0.001°Chuck:SMW Autoblok KNCS 500-155Tool carrier I (X/Y/Z/B):Technology:Traveling column with milling spindleMilling spindle:8,000 rpmPower:30 kWTorque:302 NmTool holder:HSK 100X-axis:1,040 mmY-axis:510 (+/- 255 mm) mmZ-axis:1,940 mmB-axis:+/- 120°, index 1°Tool carrier II (X/Z):Technology:Cross slide with tool turretTool drive:6,000 rpm, 40 NmNumber of stations:10X-axis:267 mmZ-axis:1,8 ...

# Complete Industrial Compressed Air Production and Treatment System – Atlas Copco GA 250 VSD+ FF & BD 1400+ Overview Complete industrial compressed air production and treatment installation manufactured primarily by Atlas Copco, comprising a GA 250 VSD+ FF rotary screw air compressor, a BD 1400+ adsorption air dryer, filtration equipment, electrical control systems, pressurised vessels, ventilation ducts, pipework and associated auxiliary components. The system is designed to provide compressed air for industrial applications requiring air compression, drying and filtration. Its integrated configuration combines the main compressor with downstream air treatment equipment and associated distribution components. The lot includes the main compression unit, adsorption drying system, filters, electrical cabinets, control equipment, pressurised vessels, pipework, valves, inst ...

Code: 0506 Brand: SAOMAD Model: UT 4 - CE Standard 4 Spindles tenoning machine for door and window frames, doors and windows - CE Standard Safety guards CE Standard Cutter heads lenght mm 100 Max distance between 2 heads mm 0/68 Horizontal displacement of upper head mm 30 Working table width mm 420 Table and square inclination +- 45 degrees Disk saw diameter mm 250 Diameter of counter profile disk max mm 300 Router shaft diameter mm 35 - Motor Hp 4 Cutter heads and disk saw motor Hp 3 Pneumatic workpiece clamping Heads suction mouth diameter mm 120 Router suction mouth diameter mm 120 Disk saw suction mouth diameter mm 120 Overall dimensions mm 1700 x 1150 x 1400 h Weight kg 500

Hamba BF2400 Cup Filler, completely overhauled, 12-piece plate, 75 cup format, consisting of from: beaker station, dosing unit with container,products: pastes, sauces,... Lidding station, sealing station, lifting and Pushing, protective covering, control cabinet

power: 1200 W; Wet/dry piston: yes; socket: yes; connection: 230 V; description: unused; 3508; Auction-ID: A1-51256-4006

Mercedes-Benz Atego 1224 4×2 tow truck with hydraulically extendable and tiltable loading platform, operable via a separate wired hand control. Also equipped with a Jige International Simplex 5T ED hoist installation, hydraulic cable winch, rear hoist installation/fork, storage boxes, work lights and beacon bar. The cab is equipped with two seats, sleeping area with curtains, air conditioning, cruise control, speed limiter, multifunction steering wheel, power windows, power and heated door mirrors, central locking, Kenwood radio and digital tachograph. The truck starts well, drives well and brakes well. Odometer reading: 809,758.9 km. Own weight: 8,150 kg, payload: 3,765 kg and maximum permissible mass: 11,990 kg. Belgian registration papers part I and part II and the certificate of conformity are present. The winch remote control is lost and is not included. The wired manual control ...

Bore diameter approx. 21 mm Wheel hub mount, diameter approx.: 221 mm Bolt circle approx.: 8x275 mm Ink. Pallet, pack size approx.: 1200x800x700 mm Auction-ID: A1-51269-549

Unused; toilet; shower; washbasin; medicine cabinet; forklift slots; crane hooks; ventilation; cold hot water connection; marble look; 220v connection; 2 sockets; Auction-ID: A1-51256-48

Brand: ZIVA Model: Rack and set of 10 urethane loaded bars from 10 to 40 kg Type: Free weights Condition: correct condition / rust / some signs of wear Dimensions: Length 120 cm Auction-ID: A1-50612-1

Without lattice box Auction-ID: A1-51211-142

Including 2x table, dimensions approx.: 200x100x101 cm Auction-ID: A1-51250-412

Constructed from various modules that ensure double production/supply. Equipped with Siemens SIMATIC HMI TOUCH control panel. Auction-ID: A1-49565-43

Bore diameter approx. 27 mm Wheel hub mount, diameter approx.: 221 mm Bolt circle approx.: 8x275 mm Ink. Pallet, pack size approximately: 1200x1100x900 mm Auction-ID: A1-51269-654

Incl. lattice box Auction-ID: A1-51211-308

concerns 6 boxes; consisting of cabinet660x450x1990mm; worktop wood 1320x445x23mm; case 660x450x875mm; wall cabinets 1320x330x405mm; tool rack 1320x660mmx10mm; tool storage with 4 drawers 660x450x885mm; with leveling feet: 5201 Auction-ID: A1-51256-81

Set of 5 EVO and ORIGIN professional fitness and cardio equipment, including a weight bench and several high-intensity cardio machines. EVO – Evo Bench Type: Weight bench Condition: Decent condition, with some signs of wear Dimensions: 145 × 61 × 45 cm ORIGIN – Storm Air Bike Type: Air bike / high-intensity cardio Condition: Functional, with some wear and rust Dimensions: 125 × 55 × 120 cm ORIGIN – Storm Rower Type: Rowing machine Condition: Functional, with some wear and rust Dimensions: 242 × 63.5 × 107 cm ORIGIN – Storm Ski Trainer Type: High-intensity cardio machine / ski simulator Condition: Functional, with some signs of wear Dimensions: 63.5 × 83.8 × 137.2 cm Auction-ID: A1-50612-27

Set of upholstered sofas and tables. Set of 24 pcs Auction-ID: A7-40559-11

Constructed from various modules that ensure double production/supply. Equipped with Siemens SIMATIC HMI TOUCH control panel. Complete with various spare parts and 25 rolls of wrapping film. Auction-ID: A1-49565-44

Including 2x table, dimensions approx.: 200x100x101 cm Auction-ID: A1-51250-411

3x forks; 2x single chain with hook; spare chain diameter 8mm; various lifting eyes and shackles; 2x hanging rack Auction-ID: A1-50864-135

Incl. pallet with frame Auction-ID: A1-51269-979

concerns 6 boxes; consisting of cabinet660x450x1990mm; worktop wood 1320x445x23mm; case 660x450x875mm; wall cabinets 1320x330x405mm; tool rack 1320x660mmx10mm; tool storage with 4 drawers 660x450x885mm; with leveling feet: 5201 Auction-ID: A1-51256-77

2x Hitachi cordless drill; 1x Hitachi impact queen machine; rivet pliers; drill set; poly trigger set Auction-ID: A1-50864-164

Conventional turning machine GRAZIANO SAG 14 - 180 x1000 mm, The Graziano SAG 14 is an Italian-made centre lathe, renowned for its high rigidity, precision, and long-term reliability; it features a natural gap, allowing for the machining of large-diameter workpieces near the headstock., Height centres: 180 mm, Distance between centres: 1000 mm, Bed width: 280 mm, Swing over crosslide: 220 mm, Spindle nose cam-lock din55029: 5 , Spindle speed: 40-1500 giri/1, Number of spindle speeds: 12, Spindle bore: 51 mm, Taper of quill mt: 4, Tailstock quill diameter: 4 Kw, Spindle motor power: 50 mm, Approx net weight: 1.400 Kg, Accessories: Self centering chuck, quick change tools turret

With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible.

An Enflex automatic packaging machine for powdery and granular products for the production of pouches from heat-sealable wrapping materials with three or four-sided sealing is available. Dosing capacity min./max.: 5cm³/50cm³, min. bag width: 50mm, min. bag height: 50mm, max. bag width (single bag): 65mm+65mm, max. bag width (with perforation): 70+mm, max. bag height: 150mm, packaging capacity range: 150-18000 bags/h. Wrapping material (all heat-sealable wrapping materials): Polyethylene opaline, cellophane, polyester, organic polypropylene, etc. Machine dimensions X/Y/Z: approx. 5000mm/1100mm/2100mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible.

A measuring device for the characterization of particles, emulsions, colloids and biomolecules in liquids is available. Laser power: 4mW, wavelength: 632.8nm, primary measurement function: zeta potential measurement, particle size measurement range: 3.8nm-100µm, software compatibility: Zetasizer v8.01 with GAMP5 conformity. Zeta potential measuring range: +/-500mV, measuring principle: DLS and laser Doppler electrophoresis, min. sample volume: 12µL, measuring angle range: 13°-173°. Machine dimensions X/Y/Z: approx. 500mm/300mm/240mm, weight: approx. 15kg. Including 2x used and 1x brand new flasks. The machine was serviced in 2024. Documentation available. On-site inspection is possible.

max. wheel diameter: 1.000 mm gear width: 500 mm max. module: 2 min. module: 50 Control: Klaassen table load of rotary table max.: 3.000 kp dia. of 3 jaw chuck: 365 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 2,85x1,5x2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller sieve with sorting belt with \"Tomra\" autosort, (2018), 626 operating hours, working width 2800 mm, equipped with bottom outlet with funnel, discharge conveyor belt, cross discharge conveyor belt including metal platform. Please note! This lot is part of a combination lot. Namely lot 22. Auction-ID: A1-51255-4

Key data: 630 mm, 230 mm, 5 kW

Gebr. Combined planing machine COLOGNE HK 63 exact year unknown Motor power 5.5 kW 2-Knife Shaft Strip Planer Knife Table height adjustment by handwheel Altitude display via dial gauge in the handwheel max. planing width: 63 cm Max. planing height: 230 mm 2 feed speeds: 10+16 m/min. Articulated pressure beams Link feed roller Steel Pull-Out Roller Length dressing tables: 210 cm Thickness table length: 120 cm Motor brake manually via selector switch Weight: 1,400 kg Manufacturer information Very good original condition! The machine from a 1-man workshop.

turning diameter: Ø 2000 mm turning length: 3500 mm turning dia. over face-slide: 1500 mm total power requirement: 28 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 10 x 3 x 3 m No. 4944 RAVENSBURG K 66 - 3500 (4350) Working range: Sph.1050x Spw.3500 (4350) Drive: 28 kW Faceplate Ø 1500 mm Tailstock Bed extension 700 mm Roller support Ø 150 - 1400 mm steady rest Lathe Ø 2000 / 1500 Spindle bore 90 mm Speed range 0.6 - 250 min-1 Space requirement approx. 10 x 3 x 3 m Weight approx. 22 tons 20 % discount for ex-works delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter:120 mm turning length:100 mm control:Fanuc Spindle 1 power:7,5 kW Spindle 1 RPM:4500 1/min Spindle 2 power:7,5 kW Spindle 2 RPM:4500 1/min Distance between spindle noses:600 mm Turret No.1 stations / rotary tools:15/15 Power rotary tools turret 1:2,7 kW RPM of rotary tools turret 1:4000 1/min Turret No.2 stations / rotary tools:15/15 Power rotary tools turret 2:2,7 kW RPM of rotary tools turret 2:4000 1/min Travel x/z turret 1:250 / 300 mm Travel x/z turret 2:250 / 920 mm Bar capacity spindle 1:51 mm Bar capacity spindle 2:51 mm power chuck:165 mm Spindle bore sp. 1:62 mm Spindle bore sp. 2:62 mm dimensions of the machine ca.:3700 x 2300 x 3000 mm weight of the machine ca.:5600 kg Used CNC-2-spindle CNC turning and milling center with gantry loader - 2x 15 station turret -automatic gantry loader with turnaround station. 14 station-magazin right side Max. Parts size Ø 12 ...

turning diameter:370 mm turning length:200 mm Spindle 1 RPM:4000 1/min control:Siemens 840 D Spindle 2 RPM:4000 1/min power capacity:L / R 18/24 kW max. torque on the spindle:630 nM C-Axis:0,001° Turret No.1 stations / rotary tools:12/12 VDI 40 Turret No.2 stations / rotary tools:12/12 VDI 40 turning speed range - milling:3000 1/min power capacity - milling spindle:8,8 kW torque rotary tools:28 Nm Bar capacity spindle 1:85 mm total power requirement:65 kVA weight of the machine ca.:13 t dimensions of the machine ca.:5,7x2,4x2,1 m Travel x1:260 mm Travel x2:260 mm Travel Y1:600 mm Travel y2:600 mm Power Chuck:2 x 250 mm manual tool eye:l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools.

Biogas CHP Jenbacher 208 Year: 2005 Operating hours 10/2026: approx. 88000 Rated power: 330 kW Speed: 1500 1/min Stamford Generator with 600 kVA Incl.: System control cabinet, power cabinet, module interface cabinet, separate exhaust gas heat exchanger, 2 silencers, table cooler, heat extraction if desired. Available expected February/March 2027 Subject to prior sale - errors possible! Internal reference number: E-1226

Biogas CHP Jenbacher 312 Power: 526 kW Year: 2006 Operating hours 10/2026: approx. 113000 Engine overhaul 2021: At approx. 90000 hours used and revised engine and generator Incl.: System control cabinet, module interface cabinet, power cabinet, exhaust gas heat exchanger, 2 silencers, table cooler, heat extraction if desired. Expected to be available July/August 2027 Subject to prior sale - errors possible! Internal reference number: E-1228

Biogas CHP Jenbacher 312 Power: 527 kW Year: 2014 Operating hours 10/2026: approx. 69000 Incl.: System control cabinet, module interface cabinet, power cabinet, exhaust gas heat exchanger, 2 silencers, table cooler, heat extraction if desired. Expected to be available July/August 2027 Subject to prior sale - errors possible! Internal reference number: E-1229

Turning length: max. approx. 1000 mm, centre height: approx. 250 mm, with coolant device, machine light, 4-jaw chuck, diameter: approx. 250 mm, hollow spindle diameter: 60 mm

standard turning dia.:200 turning length:max. 810 mm control:MSX-701 MAPPS IV greates pass round over bed:800 mm Max. distance between centres:1130 mm max. turning diameter:320 mm max. workpiecediameter:300 mm bar material dia.:65 mm Traverse X-Axis 1:210 Traverse X-Axis 2:210 mm Traverse X-Axis 3:210 mm Traverse Y-Axis 1:110 (+65/-45) mm Traverse Y-Axis 2:110 (+45,/-65) mm Traverse Z-Axis 1:300 mm Traverse Z-Axis 3:300 mm Traverse Z-Axis 2:810 mm Traverse B-Axis:870 mm turning speed range - spindle:5.000 1/min Number of spindle speed ranges:2 . spindle nose:JIS A2-6 spindle bore:73 mm spindle bearing diameter:120 mm C-Axis:0,001 ° turning speed range - spindle:5.000 1/min spindle nose:JIS A2-6 spindle bore:73 mm bar material dia. max:65/52 mm spindle bearing diameter:120 mm C-Axis:0,001 ° Number of Turrets:3 . Number of tool stations:16 x 3=48 pos Schank height for square tool:20 mm D ...

Weinig Hydromat 17B high-performance planer and moulder, year 1989. Heavy modular cast construction for precise continuous wood machining. Feed speed 5–35 m/min, feed motor 5.5 kW, 380 V / 50 Hz, 2,000 mm table, 10 mm stock removal adjustment. Siemens S5-130 WB CNC with 12-inch display and up to 16 axes. Includes EHM 14 feeding magazine: 220 mm working width, workpiece length 300–3,000 mm, pneumatic feed, 6 bar, up to 100 cycles/min. Last overhaul 2022; last service 2024.

REX HOMS-410-K two-side high-performance planer and saw combination, year 2004. Exchangeable planer heads, centre-cut guide saw, lower and upper working shafts and special lower multi-blade circular saw. Maximum planing width 410 mm, planing height 280 mm, saw cutting height 90 mm, self-feeding workpieces from 900 mm. Electronic feed 8–48 m/min. Drives: 5.5, 15, 22 and 55 kW plus 7.5 kW feed. Machine dimensions approx. 4,500 x 1,700 x 2,215 mm; weight approx. 7,800 kg. 400 V, 50 Hz, three phase. Overhauled and serviced in 2024.

turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...

turning diameter:500 mm turning length:1000 mm control:Siemens 840 D spindle:42 / 28 kW spindle turning speed - stepless:31 - 4000 1/min max. torque on the spindle:345 Nm c-axis:360000 x 0,001° feeds -stepless-:0 - 10000 mm/min rapid traverse:10000 mm/min turret stations / rotary tool stations:12/12 VDI 40 RPM of rotary tools:2000 1/min diameter of quill:90 mm quill stroke:80 mm tailstock quill taper ISO:SK 30 Tailstock Travel:600 mm Power rotary tools:3,5 kW :22,5 Nm Rotary tool holders:4 ax./ 4 rad. spindle passage:66 mm total power requirement:30 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:8x 3 x 4 m

standard turning dia.:200 turning length:max. 810 mm control:MSX-701 MAPPS III greates pass round over bed:800 mm Max. distance between centres:1130 mm max. turning diameter:320 mm max. workpiecediameter:300 mm bar material dia.:65 mm Traverse X-Axis 1:210 Traverse X-Axis 2:210 mm Traverse X-Axis 3:210 mm Traverse Y-Axis 1:110 (+65/-45) mm Traverse Y-Axis 2:110 (+45,/-65) mm Traverse Z-Axis 1:300 mm Traverse Z-Axis 3:300 mm Traverse Z-Axis 2:810 mm Traverse B-Axis:870 mm turning speed range - spindle:5.000 1/min Number of spindle speed ranges:2 . spindle nose:JIS A2-6 spindle bore:73 mm spindle bearing diameter:120 mm C-Axis:0,001 ° turning speed range - spindle:5.000 1/min spindle nose:JIS A2-6 spindle bore:73 mm bar material dia. max:65/52 mm spindle bearing diameter:120 mm C-Axis:0,001 ° Number of Turrets:3 . Number of tool stations:16 x 3=48 pos Schank height for square tool:20 mm  ...

turning diameter:410 mm turning length:500 mm control:Fanuc 21i TB standard turning diameter:275 mm travel -x axis:277 mm travel -y axis:82 (±41) mm travel -z axis:500 mm Spindle 1 RPM:4500 1/min Spindle 1 Power:18,5/18,5/15 kW Spindle 1 max. bar diameter:65 mm turret stations / rotary tool stations:12/12 Power rotary tools:5,5 kW RPM of rotary tools:6000 1/min total power requirement:39,2 kVA weight of the machine ca.:6,2 t dimensions of the machine ca.:3,1 x 2,0 x 2,2 m collet chuck:Hainbuch High precision Turning and Milling Centre with Y-axis. Machine was running with oil, not coolant. A fire extinguisher system is installed.

max. turning diameter:350 mm turning length:1040 mm control:OSP E 100 L Fanuc greates pass round over bed:550 mm Max. distance between centres:1200 mm max. workpiecediameter:550 mm Traverse X-Axis 1:270 Traverse X-Axis 2:230 mm Traverse Y-Axis 1:120 (±60) mm Traverse Z-Axis 1:930 mm Traverse Z-Axis 2:920 mm Spindle 1 Power:22 / 15 kW Spindle 1 RPM:5000 1/min spindle nose:JIS A2-8 bar material dia.:65 mm C-Axis:0,001° Number of Turrets:2 Turret No.1 stations / rotary tools:12/12 VDI 40 Turret 1 tool RPM:4500 1/min Turret 1 power rotary tools:7.0 / 3,3 kW Turret No.2 stations / rotary tools:12/12 VDI 40 Turret 2 tool RPM:4500 1/min Turret 2 power rotary tools:7.0 / 3,3 kW rapid traverse X-axis:30 m/min rapid traverse Y-axis:26 m/min rapid traverse Z-axis:40 m/min total power requirement:33 kVA weight of the machine ca.:10 t dimensions of the machine ca.:7,0 x 2,3 x 2,3 m spindle load m ...

max. turning diameter:320 mm turning length:1040 mm control: OSP E 100 L Dialog Fanuc greates pass round over bed:530 mm standard turning dia.:350 Max. distance between centres:1200 mm max. workpiecediameter:525 mm Traverse X-Axis 1:500 Traverse X-Axis 2:350 mm Traverse Y-Axis 1:160 (+80/-80) mm Traverse Z-Axis 1:1200 mm Traverse Z-Axis 2:1200 mm Spindle 1 Power:22 kW Spindle 1 RPM:3800 1/min spindle nose:JIS A2-8 spindle bore:80 mm bar material dia.:65 mm C-Axis:0,001° Number of Turrets:2 Turret No.1 stations / rotary tools:12/12 Turret 1 tool RPM:4500 1/min Turret No.2 stations / rotary tools:12/12 rapid traverse X-axis:20 m/min rapid traverse Z-axis:25 m/min total power requirement:33 kVA weight of the machine ca.:10 t dimensions of the machine ca.:6,0 x 2,5x 2,3 m High pressure coolant system:INterlit 8/20 bar spindle load monitor:B Spindle 1 Chuck:SMW 300 mm CNC Turning-and Milli ...