filler and capper used for sale

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Wolf Power Systems combined heat and power plant, type: GTK 50E08, year of construction: 2021, 400 VAC, 3 Ph, 50 Hz, electrical output: 50 kW, thermal output: 90 kW, power input (fuel input): 146 kW, fuel: Natural Gas H, gas connection pressure range: 25â€60 mbar, maximum operating pressure: 4 bar, maximum flow temperature: 90 °C. Never used, no operating hours. Dimensions plant: 2880 mm x 1020 mm x 2000 mm. Including s/s switch cabinet, dimensions: 1000 mm x 410 mm x 2000 mm.

BVT dough cutting, steaking, folding and forming line, consisting of: - Transport belt, plastic belt, belt width: 1350 mm with flour brush, dough steaker, knife to cut dough in half. - BVT forming machine for soufflé, type: MG1200, number: 33832, year of construction: 2022, total dimensions: 14000 mm x 2200 mm x 1460 mm. - Including 2 tool trolleys and large amount of parts and forms, trolley dimensions: 2050 mm x 800 mm x 1300 mm.

Tortilla forming and baking line, consisting of: - Mobile waterwheel with forming roll and transport belt, diameter form: 250 mm, plastic belt, belt width: 340 mm, total dimensions: 4000 mm x 400 mm x 1200 mm. _x000D_ - (2x) Robomotion automatic dough placer with ABB pick and place robot, name: Tortilla-Handhabung, type: Delta-Robotanlage, serial number: 212417002, year of construction: 2021, 400 V, 3 Ph, 50 Hz, 10 A, 7 kW, diameter picker: 250 mm, total dimensions Robomotion: 3000 mm x 1640 mm x 2930 mm._x000D_ - MCS srl oven, type: e-IMS 1 x 10m, serial number: XC00289-XLA.02139, year of construction: 2021, 400 V, 3 Ph, 50 Hz, 6000 A, baking time: 20 to 15 minutes, s/s mesh belt, belt width: 1000 mm, clearance: 1000 mm x 20 mm, total belt length: 10000 mm, total dimensions: 13000 mm x 2300 mm x 2900 mm. _x000D_ - Ecor Pro dehumidifier unit, model: DSR-12, serial number: 191000467, 220- ...

CPS product checking and box packaging machine consisting of: - Plastic transport belt, belt width: 400 mm - Ceia metal detector, model: THS/MS21, serial number: 21500248046, year of construction: 2015 - Mettler-Toledo Garvens GmbH checkweigher, type: XS3, fabrication number: 35006416, year of construction: 2015, 100-240 V, 50-60 Hz, weighing range: 240-3000g, maximum belt speed: 90m/min, capacity: 126 pcs/min, - Box weighing module - Box closing module

Odenberg steam peeler with steam accumulator and starch and peel separator, model steam peeler: Orbit 1000, 400 V, 3 Ph, 50 Hz, 4 kW, total volume: 1000 litres, nominal door diameter: 450 mm, peeling capacity: 12000-23000 kg/hour, dimensions: 7800 mm x 6800 mm x 5800 mm. Small hole detected in steam release vessel. Including steel switch cabinet, dimensions: 1100 mm x 400 mm x 2200 mm.

3 trestles equipped with lifting eyes with various scaffolding tubes and scaffolding planks Various lengths including 480 cm Auction-ID: A1-50660-739

With laptop stand, keyboard and mouse Auction-ID: A1-50660-922

With laptop stand, mat and mouse Auction-ID: A1-50660-924

Consisting of: various charging stations, charging stations semi-finished products, parts and charging cables. On approximately 8 pallets. Auction-ID: A1-50244-3

Mobile frame with computer in Rittal cabinet and 43 inch monitor. As well as keyboard and mouse Frame dimensions approx. 100x80x189 cm Auction-ID: A1-50660-633

Consisting of various items including: monitors, single-sided and a double-sided self-service kiosk, cables and more. Auction-ID: A1-50667-90

Serial Number: 2000 Auction-ID: A1-50244-10

batteries: 5x Pylontech FH48074 H1 3.55 kWh BMS: Pylontech FC0500-40S-B management solar panels: 20x Longi LR5-54HPB-410M (410 wp) Full Black inverter: Goodwe Hybrid Inverter 8K (3 phase) total power: 8,200 Wp power: 410 Wp per solar panel Condition: New Auction-ID: A1-46381-416

Composite installation equipped with: (1x) infeed/lifting system with stainless steel hopper, (1x) double plastic conveyor belts with transport and distribution sections, stainless steel platforms and support structures. (1x) Marel weighing/sorting system, Type: DWU, Serial number: A022216, Year of manufacture: 2003, 400V, 0.25 kW, with Intralox S100 conveyor belt, Belt width: 225 mm x Belt length: 3912m. Including: (2x) Marel MSeries 3000 - A520 control/weighing terminals, Serial numbers: A022306 and A022307, 24 V, IP67. (1x) Marel DIS-MASS, supply, transport, distribution and output sections, Serial number: A022231, Year of manufacture: 2003, 400V, 0.37 kW. As well as various electric motors, cabling and other visible accessories and accessories. Auction-ID: A1-51050-5

Mobile frame with computer in Rittal cabinet and 43 inch monitor. As well as keyboard and mouse Frame dimensions approx. 100x80x189 cm Auction-ID: A1-50660-651

Dimensions of pulling equipment 130x110x260 cm, meter cupboard 85x85x190 cm Auction-ID: A1-50656-147

Metal mobile frame with computer setup Dimensions approx. 75x75x190 cm Auction-ID: A1-50660-629

Maus automatic grinding machine, type: SAM 1200 , year of construction: 2008 v.v. 3-sided measuring device and accessories Auction-ID: A1-50656-25

Consisting of 6 span blocks size largest approx. 303x55x71 cm and 7 span plates (3 to 4 pieces) some of which are in steel trestles. Various dimensions of plates including approx. 300x65x4 cm Auction-ID: A1-50660-778

approximately 1000 allen bolts and 1000 stainless steel body rings Auction-ID: A1-46381-453

Maus automatic grinding machine, type: SAM 1200 , year of construction: 2008 v.v. 3-sided measuring device and accessories Auction-ID: A1-50656-26

Table (201x101x97cm) with vice, cabinet (90x45x200cm) with 2 doors and 4 shelves, no key available. The contents of the cabinet are not included. Auction-ID: A1-50660-656

Metal mobile frame with computer setup Dimensions approx. 75x75x190 cm Auction-ID: A1-50660-649

Including surveying wheel, Carbon tripod, clinker puller, bump bar and pestle, on 1x pallet, without the pallet Auction-ID: A1-50903-17

Dimensions H beams: 280 x 16 x 56 cm. Beam dimensions: 332 x 12 cm. Dimensions steel frame with wood: 348 x 144 cm. Auction-ID: A1-50660-753

- Includes: - Table with guide with total dimensions 2520 x 480 x 1100 mm. - Trolley: dimensions 800 x 650 x 1720 mm, arm length 370 mm, 4 swivel castors. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-610

Equipped with supply line length approx. 12 meters As well as canopy Auction-ID: A1-50660-800

Pallet not included. Decommissioned KNF Neuberger pump VDE 0530 LaboTech Retschmix TM01 Vortex Mixer Stnart Platform Rocker STR6 Laboratory Mixer Auction-ID: A1-50846-182

Consisting of tension block size approx. 250x50x54 cm and 13 parts with tension plates (3 to 4 pieces), some of which are in steel trestles. Various dimensions of plates including approx. 300x65x4 cm Auction-ID: A1-50660-775

Metal mobile frame with computer setup Dimensions approx. 75x75x190 cm Auction-ID: A1-50660-676

In and including lockable Kruizinga galvanized stacking bin Auction-ID: A1-50903-54

In and including lockable Kruizinga galvanized stacking bin Auction-ID: A1-50903-55

approximately 2000 Allen bolts and 2000 stainless steel body rings Auction-ID: A1-46381-454

KDF-2239NV0N30 Valve : 2.8 mm 16 bar 100°C Auction-ID: A1-50846-241

Serial Number: 3161 Auction-ID: A1-50244-13

Two steel storage silos with hopper floor on steel support structure, marked L71 and L72. Inscriptions: \"BENTONITE\" and \"ZILVERZAND\". Content per silo 60m3, content partly present. Version: vertical silos with hopper bottom. Construction: steel frame/support structure. Access: ladder(s) and landing/walking platform. Auction-ID: A1-50656-39

Includes 4 x iiyama Prolite monitor on support and 2 office chairs. Auction-ID: A1-50660-892

2x air and 2x power. Mounted at a height of approx. 2.5 meters. This lot must be dismantled by the buyer himself and must also provide the necessary tools, transport and/or packaging material. Auction-ID: A1-50660-632

Various tables in various sizes: - 1x 2000x1750x1000 mm - 2x 2500x1250x1000 mm - 1x 2000x1250x1000 mm Cradle width 1000 mm, height from 700 to 900 mm Auction-ID: A1-50656-158

Consisting of: development tools, interfaces, modules, printed circuit boards, displays, sensors, cables, connectors and various electronic components. On 1 pallet. Auction-ID: A1-50244-105

Metal mobile frame with computer setup Dimensions approx. 75x75x190 cm Auction-ID: A1-50660-662

2 x Dymo and 1 x Brother label printer and Fellowes paper shredder Auction-ID: A1-50660-871

Metal mobile frame with computer setup Dimensions approx. 75x75x190 cm Auction-ID: A1-50660-672

Consisting of 2 tension blocks with dimensions of the largest approx. 300x56x50 cm and 9 parts with tension plates (3 to 4 pieces), some of which are in steel trestles. Various sizes of plates including approx. 300x50x4 cm Auction-ID: A1-50660-773

Paint shop in line arrangement with several grey machine/cabinet modules, exhaust ducts and a freestanding control cabinet, various fan/motor units on pedestal with hanging rail system. Auction-ID: A1-50656-36

Control cabinet with contents consisting of: - ABB switches - PHOENIX QUINT POWER Auction-ID: A1-50846-204

Consisting of 2 desks, 1 office chair, cantilever chair, various cash register monitors, 4 desktops without hard disk, 2 Eaton UPSes, age verification scanner, receipt printers, 2 Datalogic scanners. Auction-ID: A1-50667-117

Equipped with privacy screen, memory modes, 2x office chair. Height minimum 65 cm maximum 130 cm. All other visible items such as monitors are not included. Auction-ID: A1-50660-920

Moulding sand machines with silo storage for sand consisting of bunkers on steel structures with piping and various conveyor belts. Auction-ID: A1-50656-20