135,551 used machines on RESALE, but how to find them? Machine Search
Cutter K+G Wetter – 90 liters, set with emptying device Power supply: 400 V, 3 phases, 50 Hz Power: 34 kW Current: 70 A Material: -stainless steel Volume: 90 liters Dimensions: 1300 mm x 1900 mm x 1650 mm The machine is available after it has been completely factory refurbished and with a 1-year warranty. The price includes delivery, installation, samples and training.
Cutter ROBOT COUPE – universal vertical cutter with tilt and automatic emptying Volume: 30 liters; Power: 5400 watts; Power supply: 400 volts; Frequency: 50 hertz; Power: 3 horsepower; Overall external dimensions: 740 mm × 550 mm × 1230 mm;
Slice Cutter – Machine for cutting slices of 10 mm The total number of discs is: 32 knives. The machine is available after a complete factory renovation and 1 year full warranty with delivery, installation, samples and training
: neu : Bulgarien : 128710 € : 2432.62 € : 1320 mm : 3000 mm : 625 mm : 155 mm : 940 mm : 700 mm : 15 : 160 MK : 5 - 1000 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 685 mm : 270 mm : 125 mm : 6 MK : 260 mm : 8550 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 113860,00 turning length 2.000 mm € 118510,00 turning length4.000 mm € 137250,00 turning length ...
A valve for regulating the flow and pressure of a hydraulic system. Model A: max flow rate of 60l/min, factory set pressure at 140 bar. The set pressure can be increased up to 220 bar.
Hydraulic Flow and Pressure Control Valve14 Model B: max flow rate of 114 l/min, pressure set at the factory at 140 bar. The set pressure can be increased up to 220 bar.
Banderolierer Akebono OB 301 N; cleaned and tested; Large roll magazine; Bandwidth 29mm; Product size 380x200mm; Foot switch. Banding machine Akebono OB 301 N; cleaned and checked; Big Roll Magazine; band width 29mm; package size 380x200; foot switch.
System for depalletizing empty beverage crates and palletizing full beverage crates. The system consists of the following components: - Depalletizer (Matek/Packtech, 2001): robotic arm with clamping grippers for layer-by-layer depalletizing; upgraded in 2017. - Palletizer (Matek/Packtech, 2001): robotic arm with clamping grippers for layer-by-layer palletizing. - Pallet pressure check (Syscona, 2001) - 2 pallet magazines (for good and rejected pallets) - Pallet labeling system (2005) for applying EAN 128 labels - Pallet strapping system (Strapex, 2005) for applying two horizontal straps - Pallet conveyors with turning segments as well as infeed and discharge stations, Additional title: Complete palletising and depalletising system for beverage crates; 2001 - 2017, Capacity: 44000 bo/h, Formats: 0.5 L NRW bottles in 20-bottle and 9-bottle crates, Features: Depalletising robot; Palletising ...
Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screw ...
A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperatu ...
The cell consists of two Kawasaki FD 50N industrial robots as well as an infeed and outfeed conveyor, it is mounted on a compact, mobile base plate equipped with threaded holes for fastening the individual components, a roller conveyor and the safety enclosure, the entire cell is forklift-compatible, can be relocated after installation to adapt the cell to different production lines, particularly suitable for seasonal production and short production runs, area: 8.6m², overall length: 3550mm, overall width: 2440mm. Number of axes: 5, max. reach: 2100mm, max. payload: 50kg, repeatability: +/-0.15mm, robot weight: 580kg, palletizing capacity: 2400 cycles/h at 50kg payload, controller: D42, working envelope: 1100x1100x1944.7mm, axis movements: Axis 1: +/-157°, Axis 2: +140° to -95°, Axis 3: +30° to -205°, Axis 4: +/-360°, Axis 5: +/-10°, axis speed: Axis 1: 180°/s, Axis 2: 150°/s, ...
turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 mm total power requirement: ? kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,511,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Zum Verkauf stehen professionelle Bäckereischneidemaschinen vom Typ SCHICKART 30 PLUS. Wir bieten 2 Stück robuste, industrielle Schneidemaschinen aus Edelstahl an. Die Geräte sind für das schnelle und präzise Schneiden von Backwaren konzipiert – geeignet für Bäckereien, Konditoreien, Geschäfte, die Gastronomie sowie die Lebensmittelproduktion. Die wichtigsten Informationen: Hersteller: SCHICKART Modell: 30 PLUS Anzahl: 2 Stück Ausführung: Edelstahl robuste industrielle Bauweise Einstellmöglichkeiten und Arbeitselemente zur Anpassung des Gerätebetriebs ausgestattet mit einer Auffangschale Gebrauchtgeräte, sichtbare Gebrauchsspuren optischer Zustand wie auf den Fotos
x-travel: 290/300 mm y-travel: 150/160 mm z-travel: 330/340 mm total power requirement: kW weight of the machine ca.: 675 kg dimensions of the machine ca.: 2700 x 2500 mm The machine was overhauled by the company Harich in 2017. Machine number: 57330/08 Technical data: Table longitudinal movement (motorized/manual): 290/300 mm Spindle head transverse movement (motorized/manual): 150/160 mm Support vertical movement (motorized/manual): 330/340 mm Angle table clamping surface: 600 x 210 mm Spindle speeds: 40 – 2000 rpm Tool holder: Standard taper 40 Motor power: 1.5/1.9 kW Feed rate range (infinitely variable): 5 – 500 mm/min Rapid traverse: 1200 mm Equipment: 3-axis digital readout (Heidenhain) Vertical milling spindle with quill adjustment Additional horizontal spindle REPAR 2 safety device (www.repar2.com) Operating manual The machine will be loaded onto a Euro-pallet, total height: ...
x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm Control: Heidenhain TNC 410M table surface area: 800 x 400 mm tool taper: ISO 40 spindle turning speed - stepless: 50 - 4000 U/min main drive motor: 5,5 kW total power requirement: kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: m CNC control HEIDENHAIN TNC 410M Coolant equipment Machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 1000 mm turning diameter: 460 mm swing diameter over bed slide: 270 mm turning dia. in gap: 690 mm spindle bore: 80.0 mm turning speeds: 25 - 1700 U/min bed width: 300 mm spindle taper: DIN 55029 D 1-8 taper in tailstock: 4 MK quill travel: 130 mm total power requirement: 5.5 kW weight of the machine ca.: 1675 kg. range L-W-H: 2300 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - ...
turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - ...
turning length: 800 mm turning diameter: 280 mm turning diameter over slide rest: 150 mm spindle bore: 42.0 mm tailstock quill taper MT: 3 MK bed width: 208 mm turning speeds: 42 - 2022 U/min spindle taper: DIN 55027/5 quill stroke: 90.0 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 750 kg range L-W-H: 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, w ...
turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip spla ...
turning length: 1500 mm turning diameter: 460 mm swing diameter over bed slide: 270 mm turning dia. in gap: 690 mm spindle bore: 80.0 mm turning speeds: 25 - 1700 U/min bed width: 300 mm spindle taper: DIN 55029 D 1-8 taper in tailstock: 4 MK quill travel: 130 mm total power requirement: 5.5 kW weight of the machine ca.: 1845 kg. range L-W-H: 2750 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - ...
turning diameter over bed: 340 mm turning diameter over slide rest: 260 mm turning length: 700 mm spindle bore: 48 mm spindle turning speed range: 25 - 2000 U/min spindle nose: DIN 55027 KK 5 voltage: 380 Volt total power requirement: 2,2/4,4 kW weight of the machine ca.: 1000 kg. dimensions of the machine ca.: 1.800 x 700 x 1.500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 760 mm turning length: 3000 mm swing diameter over bed slide: 520 mm centre height: 380 mm reus: 17 (7,5 - 1015) U/min tail stock: MK6 quill stroke: 225 mm diameter of quill: 105 mm spindle bore: 132 mm feed: längs 0,039 - 18 mm/min feed: quer 0,02 - 9 mm/min total power requirement: 15 kW weight of the machine ca.: 4700 kg dimensions of the machine ca.: 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 86980 € : 1643.92 € : 860 mm : 3000 mm : 430 mm : 132 mm : 620 mm : 560 mm : 11 : 140 MK : 17 : 7,5 - 1015 1/min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 240 - 2/3 : 435 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 3470 mm : 1700 mm : 1730 mm : 4650 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating ...
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 53250 € : 1006.43 € : 500 mm : 1500 mm : 250 mm : 75 mm : 300 mm : 400 mm : 8 : 80 MK : 3 : 25-100, 100-400, 500-2000 U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60-1/4 Gänge/ : 0.125 - 30 : 240-1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3100 mm : 1250 mm : 1400 mm : 2800 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: ...
: neu : Bulgarien : 26210 € : 500.61 € : 325 mm : 750 mm : 165 mm : 32 mm : 190 mm : 200 mm : 5 : 4,5 MK : 2 : 85-405, 470-2200 U/Min : 48 : 0.006 - 1.77 mm/U : 0.003 - 0.885 mm/U : 0.1 - 28 mm : 0.1 - 1.75 : 70 - 4 : 150 mm : 95 mm : 40 mm : 3 MK : 100 mm : 2.2 kW : 2150 mm : 950 mm : 1350 mm : 770 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 26.730,- The data for this ad was created with ModulMW ...
: neu : Bulgarien : 133550 € : 2524.1 € : 1090 mm : 3000 mm : 500 mm : 155 mm : 690 mm : 700 mm : 15 : 160 MK : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 240 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 8050 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 118510,00 ...
bore capacity in steel (diameter): 25 mm x-travel: 500 mm y-travel: 260 mm cross-moving table: 880x320mm spindle turning speed - stepless: 100-9000 U/min control: HEIDENHAIN TNC310 vertical movement: 480 mm quill stroke: 160 mm weight of the machine ca.: 2.2 t Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 570 mm turning diameter over slide rest: 365 mm turning length: 1500 mm centre distance: 1800 mm spindle turning speed range: 11-2240 U/min spindle bore: 62 mm weight of the machine ca.: 4 t Misc accessories More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): / mm x-travel: 1750 mm y-travel: 1250 mm z-axis: 1250 mm total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t stroke: 400 mm table-size: 1150 x 350 mm diameter of piston: 300 / 185 mm throat: 225 mm speed of pressing: 166 mm/sec pre-running speed: 75 mm/sec return speed: 208 mm/sec total power requirement: 14 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m Press force: 160 t Stroke: 400 mm Table size: 1,150 × 350 mm Cylinder diameter: 300 / 185 mm Throat depth: 225 mm Pressing speed: 6 – 16 mm/s Rapid approach speed: 75 mm/s Return speed: 208 mm/s Total power requirement: 14 kW Machine weight: approx. 8.5 t Pressing speed: 6 – 16 mm/s Rapid approach speed: 75 mm/s Return speed: 208 mm/s Installation distance between ram pressure pad and crosshead pressure pads: 320 mm Distance between pressure pads on ram and table: 50 – 888 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description Item # 9367 - COFFEE ROASTING AND PACKING LINE Including : TOPER (Turkey) Coffee Roaster, Model TKMSX15, Year 2010, 15Kgs batch capacity TOP Y MACHINERY Bucket Elevator Feeders, Model TOPY-BE, Year 2025, TOP Y MACHINERY 2-Head linear Weigher IBL INTERNATIONAL Grinder, Model Km145, MDP Mini Doypack Packaging Machine The pre-made pouches Doypack packing machine will do 12 x 1kg packs a minute could pack 1 - 5kg bags It was doing a pouch size 220mm High x 140mm Wide, that is a 200g pouch of coffee, Vacuum Unit/Dust Extractor WORTHINGTON Rollair 550T Compressor SNEED Date Coding Unit, mounted on conveyor
Bäuerle KFL Milling and Drilling Machine The robust Bäuerle KFL combined woodworking machine combines a panel saw, a long-hole drilling machine and a table milling machine with feed in a single unit, and comes with a comprehensive range of accessories. Technical data: Motors: 2 Length: approx. 320 cm Width: approx. 140 cm Height: approx. 160 cm Table: swivelling Technical details: on request Condition: Gebraucht Location: Tauberbischofsheim, Germany
APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Technical data: Workpiece length: 55170 mm Workpiece height: max. 27.5 mm Workpiece width: max. 28 mm Milling units: 2 Cross-cut saw: 1 Condition: Gebraucht Location: Tauberbischofsheim, Germany
Graule Type ZS 135 N crosscut and mitre circular saw for precise cross-cutting and mitre cutting of solid timber, mouldings and profiles with a high cutting height. It can be swivelled and tilted. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craft work and workshop production. Ideal for all woodworking businesses. Includes base frame. Cutting height ~ 135 mm Cutting length ~ 460 mm Technical data: Motor: 2 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany
Himmel HF120 mitre jointing machine for the precise and secure gluing of mitre joints in wooden frames, glazing bars and mouldings using white glue. The machine enables a fast setting time thanks to high-frequency technology, pneumatic clamping mechanisms and precise alignment of the workpieces. Ideal for furniture and picture frame manufacturing. Machine not in working order. Technical data: Cycle time: approx. 4 seconds Strip width: max. 100 mm Strip height: max. 100 mm Operation: foot switch Possible angles: 90°, 120°, 135° Condition: Gebraucht Location: Tauberbischofsheim, Germany
workpiece length: 100 mm swing diameter: 80 mm number of spindles: 2 Control: FANUC 31i-B5 workpiece weight: 2,00 kg centre height: 170 mm grinding wheel diameter: 100 mm grinding wheel hole diameter: 32 grinding wheel width max.: 20 peripheral speed: max. 125 m/sec passage of steadyrest: 45 - 60 mm total power requirement: 75,00 kW weight of the machine ca.: 25,00 t dimensions of the machine ca.: 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control, loading/unloading unit, CO2 extinguishing system, for CBN grinding wheel, tailstock, steady, diamond wheel dresser mounted on the dressing spindle, Wheelhead variant 12 (two grinding spindles can be moved separately). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TOS BDU 250A Internal and Face Grinder Machine Max. diameter of grinded hole: 250 mm Max. depth of grinding: 250 mm Max. workpiece diameter: 400 mm Max. swing: 470 mm Max. weight of workpiece: 100 kg Max. length of workpiece: 1000 mm Equipped with Face Attachment Total input: 9 kVA Machine weight : 3600 kg
workpiece length: 100 mm swing diameter: 80 mm number of spindles: 2 Control: FANUC 31i-B5 workpiece weight: 2,00 kg centre height: 170 mm grinding wheel diameter: 100 mm grinding wheel hole diameter: 32 grinding wheel width max.: 20 peripheral speed: max. 125 m/sec passage of steadyrest: 45 - 60 mm total power requirement: 75,00 kW weight of the machine ca.: 25,00 t dimensions of the machine ca.: 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control, loading/unloading unit, CO2 extinguishing system, for CBN grinding wheel, tailstock, steady, diamond wheel dresser mounted on the dressing spindle, Wheelhead variant 12 (two grinding spindles can be moved separately). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
press capacity: 28 t x-axis: 2000 mm y-axis: 1000 mm machine weight ab.: 11000 kg Youtube-Video-Links: https://www.youtube.com/watch?v=LdcmUuj8QnM&ab_channel=BaestleinGmbH https://www.youtube.com/watch?v=IcEmqxjpnoE&ab_channel=BaestleinGmbH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 45 mm square edge steel: 45 mm L-beam: 12 mm : 40 flat steel: 450x15 mm L-beam 90°: 152x152x13 mm : 45 mm square edge steel: 45 mm : 12 mm weight of the machine ca.: 2323 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 200 mm centre distance: 1.000 mm spindle turning speed range: 1600 U/min spindle bore: 42 mm turning length: 1600 mm turning diameter over bed: 410 mm : 230 mm machine weight ab.: 1.700 kg dimensions: 2000 × 1000 × 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
hole diameter in sheet thickness: Ø 30 in 12 mm hole diameter in sheet thickness: Ø 19 in 19 mm pressure capacity max.: 45 to weight of the machine ca.: 1.700 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 400 mm turning diameter over slide rest: 245 mm turning length: 800 mm total power requirement: 4.5 kW weight of the machine ca.: 1.25 t required space: 1.96x1.69x1.06 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 280 mm turning diameter over slide rest: 150 mm turning length: 800 mm turning speed range: 26 - 2000 U/min spindle bore: 24 mm total power requirement: 0,8 / 1,6 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,60 0,70 1,20 m 1. Hand - School Machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 750 mm turning diameter: 310 mm turning diameter over slide rest: 175 mm spindle bore: 32.0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2200 U/min bed width: 200 mm spindle taper: DIN 55027 GR 5 total power requirement: 2.2 kW weight of the machine ca.: 710 kg range L-W-H: 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college () - in checked condition - machine videos - https://www.youtube.com/watch?v=iqU7Bkh6INo https://www.youtube.com/watch?v=aSViqjk51Ik Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - NEWALL digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning di ...
turning diameter: 360 mm turning length: 1000 mm swing diameter over bed slide: 215 mm reus: 30 - 3000 U/min spindle bore: 38 mm feed: längs 0,043 - 0,653 m/min total power requirement: 3,5 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: 1900 x 900 x 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 420 mm turning length: 1500 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 590 mm centre height: 210 mm Turning length in the bed bridge: 260 mm reus: 16 (45-1800) U/min tail stock: MK 4 quill stroke: 120 mm diameter of quill: 50 mm spindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mm spindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/min feed: plan 17 / 0,025 - 0,85 m/min total power requirement: 4,6 kW weight of the machine ca.: 1340 kg dimensions of the machine ca.: 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range ...
filling capacity: 600 Liter Usable Volume: 400 Liter filling amount: 600 kg workpiece sizes: 850 x 200 mm Individual weight of workpiece: max. 20 kg turning speeds: 4.0 - 18.0 U/min Inner drum width: 920 mm drive motor: 400 V weight of the machine ca.: 1750 kg range L-W-H: 2000 x 1500 x 2000 mm Good / well-maintained condition () Current list price: approx. 30,000 euros Main functions of the machine: - Deburring sharp edges after cutting. - Edge rounding for safer workpieces. - Descaling and rust removal from surfaces. - Oil and grease removal - Low noise level - Integrated dust extraction - Quick emptying - Sturdy lining The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...
maximum number of results exceeded
please refine your search
