135,482 used machines on RESALE, but how to find them? Machine Search
Insulated, cylindroconical stainless steel tanks with three shell cooling zones and one cone cooling zone. Previously used as beer storage tanks., Additional title: vertical, coolable, insulated stainless steel tanks, Gross volume: 30200 l , Pressure capacity: 0,99 bar, Max. operating temperature: 40 °C, Cooling area: 14,45 m², Length: 2,83 m, Width: 2,83 m, Height: 7,86 m, Weight: 3150 kg, Material: stainless steel, Position: standing frame, Features: insulation, tank fittings
Cylindroconical 580 hl fermentation and storage tank - glycol cooling, 4 cooling zones (1 x cone, 3 x cylinder) - swivel cone - stainless steel - insulated - support skirt, Additional title: Outdoor tanks, Capacity: 58000 l, Operating pressure: 2 bar, Operating temperature: 20 °C, Cooling area: 29 m2 1 x cone cooling; 3 x side-wall cooling, Height: 10,68 m, Material: stainless steel, Position: vertical, Base construction: Short skirt support, Features: Tank cooling; swivel conus; insulation; frame; outlet DN100; CIP connection; 2 x temperature sensor; sample valve
Vertical stainless steel pressure tanks on tubular legs, fitted with various fittings., Additional title: Vertical stainless steel tanks, Capacity: 4969 l, Operating pressure: 2 atm, Width: 1,8 m, Height: 2,5 m, Weight: 300 kg, Material: Stainless steel 1.4541 (AISI 321), Position: vertical, standing on 4 pipe feet, Base construction: cylindrical tank with dished heads, Features: Manway; safety valve; CIP piping
Hold down belt, circulation pump, sediment removal, oil level control, manual hoists, prepared for CO² fire extinguisher, Belt width: 400 mm, Frying length: 3000 mm, Heating: electric, 66 kW, Power: 3 x 400V, 50 Hz, 72kW, Dimensions: 5400 x 1650 x 3150 mm, Weight: 2450 kg
Hold down belt, sediment removal, circulation pump, oil level control, Prepared for CO2 fire extinguisher, Belt width: 600 mm, Frying length: 3000 mm, Heating: thermal oil, 90kW, Power: 3 x 380V, 50Hz, 3.6kW, Dimensions: 5650 x 1800 x 3450 mm, Weight: 2150 kg
Automated Clean In Place (CIP), Continuous hot water, single pass, belt washer, With Stein Humitroll moisture monitor and control, Belt width: 40 inch, 1010 mm, Heating: thermal fluid, 2 x 460kW, Steam: max 2 x 545 kg/hr, Compressed air: 6 - 10 Bar, Power: 3 x 400V, 50Hz, 63kW, Dimensions: 22500 x 3000 x 3000 mm
Teflon infeed, hold down belt, circulation pump, oil level control, sediment removal, electric hoists, prepared for CO2 fire extinguisher, Including separate infeed belt, Machine delivered with CFS VTC1100-194 oiltank and oilpump, Belt width: 500 mm, Frying length: 3000 mm, Heating: electric, Power: 3 x 380V, 50Hz, 72kW, Weight: 2500 kg, Dimensions: 6300 x 1700 x 3100 mm
Hold down belt, sediment removal, circulation pump, electric hoists, oil level control, Prepared for CO2 fire extinguisher, Belt width: 600, Frying length: 4500 mm, Heating: thermal oil, 214kW, Power: 3 x 380V, 50Hz, 10kW, Dimensions: 7400 x 1900 x 3150 mm, Weight: 2750 kg
Teflon infeed, hold down belt, circulation pump, electric hoists, oil level control, prepared for CO2 fire surpression system, Belt width: 630 mm, Frying length: 5000 mm, Heating: thermic oil, 250kW, Power: 3 x 400V, 50Hz, 11kW, Dimensions: 9100 x 1900 x 2900 mm
Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforwa ...
Used Complete Line for PET and Glass 2007 Rinsing Machine: Manufacturer: Dipran Model: Marea 12P Year: 2007 The used complete line for PET and glass bottles includes a high-quality rinsing machine. Manufactured by Dipran in 2007, the model is Marea 12P. This machine ensures thorough and efficient rinsing of the bottles, preparing them for the filling process. Filling Monoblock: Manufacturer: NELDEN Model: Giove FC VA 20-1 Big Year: 2010 The line also features a reliable filling monoblock manufactured by NELDEN. The model is Giove FC VA 20-1 Big, and it was produced in 2010. Using a gravity filling method, this monoblock precisely fills the bottles with the desired product, ensuring accuracy and consistency. Labeling Machine: Manufacturer: Newtec Model: Fix S2 E2 Year: 2007 Included in the line is a Newtec labeling machine, model Fix S2 E2, manufactured in 2007. With its mechanical cam, t ...
Used bottling line PROCOMAC for still and sparkling water up to 12000 bph We offer a complete bottling line for natural and carbonated mineral water, specifically designed to meet the complex needs of technicians and industry experts. This solution not only handles bottle formats from 0.5 to 2 liters but also produces up to 12,000 bottles per hour, ensuring high reliability and excellent performance.. SIPA Blow Molder and Preform Management The SIPA SFR 12 blow molder, manufactured in 2000, initiates the production process. It efficiently manages preforms using a dumper and elevator-orienter. Furthermore, the integrated cooling chiller and four sets of molds allow the machine to produce bottles of various sizes with both precision and flexibility. As a result, it ensures smooth operations throughout the initial production phase. PROCOMAC Monoblock: The Core of the System The PROCOMAC mon ...
Melting and holding furnace StrikoWestofen MH II-T 6000/3500 G-eg, built in 2021, heating capacity 2,600 kW, capacity 6,000 kg, melting capacity 3,500 kg/h, max. melting pool temperature 760°C, max. furnace room temperature 1,050°C, height approx. 8,043 mm, with Striko K2000E feeder, built in 2021, with elevator for transport boxes
Already working with the Doka Edge Protection System XP? Then this accessory package is your next logical move. With original Doka railing clamps and XP posts, you’ll expand your system exactly where it matters †whether it’s for additional sections, larger areas, or extra safety along the edges. 🔧 100% original Doka XP parts 📦 Ready for immediate delivery †incl. reusable packaging 💶 Full package for just €5,135.†(net) This package is ideal for anyone looking to extend their existing XP setup quickly and efficiently †no extra planning needed. Everything fits. Everything works. Just like youre used to. Expand now †before you hit the limit. The accessories are ready †you just have to grab them. 😉 👉 Ask. Decide. Go. Price: from € 4259,00 ...
🔒 SAFETY FIRST †Doka Folding Platforms K 4.50 m †strong. safe. ready. 🔒 When safety and efficiency matter on your construction site, our Doka Folding Platforms K 4.50 m are just what you need! 💪 These platforms deliver full performance across the board: 🔹 Ready for immediate use †pre-assembled for quick setup 🔹 Durable & reliable †galvanized steel and yellow-coated timber components 🔹 High load capacity †ideal for demanding applications 🔹 Space-saving when folded †perfect for transport and storage 📦 ✨ Built to perform †safe, inspected, and robust! 👉 Need more platforms or looking for a lower quality grade? No problem! We offer various condition levels to suit your needs and budget. Just reach out †we’re happy to help! 😊 ...
Key data: 916 KW, 400 V
Jenbacher Gas-CHP JMS 412 GS-N Gas electricity and heat generators from 2012, approx. 85,000 operating hours, last service at 72,000 operating hours. With control, heat exchanger and two silencers – radiator optional. 889 KWel x 1,500 rpm, 400 V / 50 Hz. AC generator: Stamford PE734C2, 1,445 KVA Manufacturer: Jenbacher Model: JMS 412 GS-N, LC Type: Natural Gas CHP Serial Number: 1048561 Power [KWel]: 889 Engine: Jenbacher J 412 GS-B 309 Engine power [KW]: 916 Year of Make: 2012 Hours: 85,000 Dimensions LxWxH [m]: 5.40 x 2.00 x 2.40 Weight unit [kg]: 11,150 AC Generator Stamford PE734C2 Manufacturer: Stamford Model No.: PE734C2-12 Type: AC Synchronous Generator Serial Number: A12B052791 Power [KVA]: 1,445 Voltage [V]: 400 Frequency [Hz]: 50 Speed [1/min]: 1,500 Year of Make: 2012 Operating hours [h]: 85,000 Weight [kg]: 2.967
Secure available PERI MX 100 x 240 concreting platforms for professional formwork, concrete construction, and infrastructure projects 🚀 These proven working and concreting platforms provide additional safety and efficiency on site and are an ideal addition to existing formwork systems 🔥 The offered PERI MX 100 x 240 concreting platforms are ideally suited for concreting operations, formwork work, and creating safe working areas on wall formwork and concrete construction projects. Thanks to their robust design, they offer versatile applications and support efficient site operations ⚡ The platforms are available in 1 Star and 2 Star quality and provide a cost-effective alternative to higher-graded material. Particularly attractive for companies that rely on proven PERI formwork components while maintaining a cost-conscious purchasing strategy ...
An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling ...
🧣📦 Last chance for a smart site upgrade: The Doka cavity wall bracket 60 is now available in a clearance bundle †by pallet , fairly priced and ready to ship ! 💥 Whether you need a pouring platform , edge protection solution or system extension †this bracket is a perfect match for anyone using the Doka Xsafe XP system . Compatible. Durable. Cost-effective. 🔎 Why this deal makes sense: ✅ Compatible with Xsafe XP †a smart add-on for your edge protection system ✅ Versatile use †for pouring platforms and barriers on precast hollow-wall elements ✅ Galvanised finish †durable, resilient and immediately ready for use ✅ Sold by full pallet (10 pcs) †condition-based price tiers available ✅ Immediate availability †no waiting, no quote ping-pong ✅ Clearance pricing †sma ...
A PCS vertical form fill seal packaging machine is available. Documentation available. An on-site inspection is possible.
💥 You’re working with the PERI bracket platform system MXK ? Then this offer is made for you: We’re selling a complete set of certified original PERI bracket decks †accurate fit, durable and ready to go. 💸 Perfect for anyone looking to buy PERI MXK plankings or upgrade their existing system. 🔩 What’s included: ✅ Original PERI parts †no replicas ✅ Lengths: 0.90   m | 1.20   m | 2.40   m ✅ Material: Aluminium-wood combination ✅ Certified and ready to use ✅ Safely bundled on transport supports 💡 Ideal for concreting and intermediate platforms with PERI MAXIMO. 💸 Total price: €1,699 †only while stock lasts. â³ First come, first build. Secure your package now †this offer won’t come twice. 🛒 Get in touch today and ...
We are selling our BTH system. The plant was extensively maintained (by the supplier Premier Tech) and prepared for a new packaging project, which was unfortunately cancelled. Currently, we only have one customer with about two production runs per year, each lasting about two weeks. It is a special project in which 4.8 kg are filled into transparent PE bags; this is possible with the machine at low power. The machine is designed for daily operation, which is why we now want to sell it. Below you will find some information. If you are interested, you are welcome to visit the machine on site. In order to continue supplying our customers with the 4.8 kg bags, we can sell the machine together with this project (it is a food-grade allergen-free product for a non-food application). Packaging in paper bags with an inner bag (liner) is much faster and easier. For questions or more videos, pleas ...
Used dosing bunker with moving floor and discharge roller Manufacturer: HARTNER Type: active vario-storage (AVS System 2100 - 40) Year of Make: 2004 Technical data: Overall width: approx. 2,670 mm Length: approx. 12,000 mm Width: approx. 2,670 mm Height: approx. 2,500 mm
Overview This crate palletizing and depalletizing line was integrated in 2006 by Profipack Verpackungsmaschinen GmbH (Austria) around two Yaskawa Motoman NX100 articulated robots - one palletizing cell and one depalletizing cell - together with a Logipack vertical pallet strapper. It is still installed at a German brewery, where it palletized and depalletized crates for beer, CSD and mineral water production until the whole line was stopped. Because it served multiple product lines, it handles a wide variety of crate formats on Euro pallets. The machine can be visited on request. Technical data Manufacturer / integrator: Logipack (vertical strapper), Profipack Verpackungsmaschinen GmbH (system integrator, Austria) Robots: 2x Yaskawa Motoman NX100 articulated robots (palletizer + depalletizer) Year of manufacture: 2006 Machine type: crate palletizing and depalletizing line Capacity: 33,00 ...
One Gietz platen die-cutting and embossing press and one Polygraph free-arm wire stitching machine are offered. 1) One Gietz Presto platen printing, die-cutting and embossing machine, max. paper size X/Y: approx. 320mm/480mm, frame size X/Y: approx. 320mm/460mm, working area X/Y: approx. 350mm/480mm, max. paper size without additional equipment: approx. 330mm/470mm, capacity: approx. 2500strokes/h, flywheel revolutions per stroke: 8, flywheel diameter: approx. 725mm, flywheel width: approx. 50mm, working height: approx. 900mm, weight: approx. 1100kg. Inspection possible by prior arrangement. 2) Polygraph 781/1L50 RF free-arm wire stitching machine, year of manufacture: 1960, number of stitching heads: 1, max. stitching thickness: approx. 8mm, stitching arm length: approx. 500mm, front stitching arm width: approx. 10mm, inside staple crown length: approx. 12mm, max. stitching capacity: ap ...
A custom-built slitting and straightening machine Grossmann/BFW for aluminum strip is available. Strip width: 35mm, Straightening unit: multi-roll, Knife type: rotary knives, Strip guidance: roller guidance, Tension control: KTC800A. Documentation available. An on-site inspection is possible.
Tenon cutting and slotting slotting PANHANS 1376 -used----------- Technical data ----------length of the base plate: 1,000 mm, sliding travel: 710 mm, size of the sliding plate: 295 x 225 mm, installation height approx.: 56 mm
UsedPaal RS40 residual roll saw / splitter and roll unwinders. Year of manufacture: 1998 Max. roll diameter 400 mm Max. roll length 2.500 mm Saw blade diameter 600 mm Drive power 19 kW Max. enclosure width approx. 1000 mm Max. machine length approx. 9000 mm Machine weight about 2,400 kg max. transport chain speed: 2.45 to 11.75 m/min. Throughput capacity depending on roll length and saw cut depth: 87.5 to 175 m/h
Used SCM S520 NOVA thickness planer useful working width mm. 520 Standard 4-knife shaft working height min/max mm. 3,5/300 max removal mm. 8 Double rubberized drive roller at the exit nr. 1 toothed drive roller at the inlet Electric Deck Lift 4-speed feed Star/delta starter Shaft rotation speed 4500 rpm Weight kg. 687 CE compliant
A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible.
Key data: 5 KW, 400 V
Viessmann Gas CHP Vitobloc 200 EM-5/13 Gas electricity and heat generators from 2013 with unknown operating hours, closed module. 5.5 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 40VS1 C 6/4 Manufacturer: Viessmann Model: Vitobloc 200 EM-5/13 Type: Natural Gas CHP Serial Number: 7459188 3 01862 105 Power [KWel]: 5.5 Power [KWth]: 13.5 Output [KWgas]: 20.2 AC Generator: Leroy Somer LSA 40VS1 C 6/4 Year of Make: 2013 Operating hours: unknown Dimensions LxWxH [m]: 1.50 x 0.80 x 1.30 Weight unit [kg]: 500
Heating output: 275kW, electrical output: 201kW, fuel: natural gas, engine: MTU E 3066 L3, engine cylinders: 6, overall efficiency: approx. 82%, generator rating: 276kVA, machine dimensions X/Y/Z: approx. 3550mm/1800mm/2100mm, weight: approx. 4500kg, operating hours: approx. 57557h. Documentation available. An on-site inspection is possible.
Ref.nr. 00926 Name of the plant Struers Labopol Grinding and polishing workstation For sale is a professional grinding and polishing workstation Labopol for metallographic sample preparation. The system is suitable for laboratory, quality assurance and materials testing. Manufacturer: Struers Model Labopol 2 Year of construction Condition Technically OK Can be viewed under power Remark Grinding machine function with diamond grinding wheels + water cooling Ref.Nr 00927 Name of the system Struers Labotom-3 separator For sale is a Struers Labotom-3 precision separator for materials testing and metallographic sample preparation. The machine enables precise and reproducible cutting cuts. Manufacturer: Struers Model Labotom-3 Year of construction unknown Condition Good technical condition, can be demonstrated under power Remark Cutting device for grinding ...
Key data: 70 KW, 400 V
Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas electricity and heat generator, built in 2009, 56,814 operating hours, with silencer. 70 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial number: 700 02 0070 0033 0712 Engine: MAN E0836 E302 Engine power [KW]: 75 Power [KWel]: 70 Power [KWth]: 115 Year of Make: 2009 Hours: 56,814 Weight unit [kg]: 2,500 Dimensions LxWxH [m]: 3.4 x 0.9 x 1.80 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 299162/7 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2009 Weight [kg]: 300
Key data: 110 KW, 400 V
Sokratherm Gas-CHP GG 110iSH Gas electricity and heat generator from 1997, with 27,000 operating hours, with control. Was taken out of service 15 years ago after maintenance. 110 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Marelli Motori M7B 250 MC 4, 200 KVA Manufacturer: Sokratherm Model: GG 110iSH Type: Gas CHP Serial Number: 712217 Engine: MAN E2866 E301 – 118 KW Electrical power [KWel]: 110 Thermal power [KWth]: 200 Gas capacity [KWgas]: 344 Year of Make: 1997 Hours: 27,000 Weight unit [kg]: 3,320 Dimensions LxWxH [m]: 2.80 x 0.90 x 2.20 AC Generator Marelli Motori M7B 250 MC 4 Manufacturer: Marelli Motori Model: M7B 250 MC 4 Type: AC Synchronous Generator Serial Number: MD-1990 Power [KVA]: 200 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 289 Speed [1/min]: 1,500 Year of Make: 1997
A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible.
A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible.
An automatic gKteso post-processing and deburring center is available. Technology: 6D, axes: 5+1, working dimensions X/Y/Z: 500mm/500mm/300mm, max. travel speed: 1m/s, repeatability: 0.05mm, path accuracy: 0.1mm, max. flatness: 0.02mm, chucks: 2-jaw/3-jaw/4-jaw chucks, machine dimensions X/Y/Z: approx. 2400mm/1800mm/2900mm, operating hours: approx. 12541h. Including pneumatic chucks, safety light curtain, exchange table and 6D technology. Documentation available. An on-site inspection is possible.
CONTROLS CNC controls FANUC 31I MODEL A BASIC FUNCTIONS number of spindles: 2 number of turrets: 2 live positions: yes number of c-axes: 2 number of y-axes: 1 WORKING RANGE TURNING turning diameter (max): 230 mm bar diameter (max): 65 mm worpiece length max.: 700 mm MAIN SPINDLE spindle revolutions (min): 50 /min spindle revolutions (max): 5000 /min spindle bore diameter: 65 mm c-axis: yes COUNTER SPINDLE spindle revolutions (min): 50 /min spindle revolutions (max): 6000 /min c-axis: yes X/Z SLIDE tool fixture: Turret ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2800 mm space requirements -front/back-: 1630 mm total height: 2200 mm total weight approx.: 9000 kg ATTACHMENTS (TURNING) chip conveyor: yes coola ...
turning diameter over bed: 350 mm turning diameter over slide rest: 216 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 40 - 1800 U/min centre height: 170 mm spindle bore: 40 mm total power requirement: 4,0 KW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 2,0 x 0,85 x 1,6 m Centre lathe (lead screw and feed rod) - Digital readout - 3-jaw chuck (160 mm) - Spare jaws - Coolant system - Multifix tool post - 4 Multifix tool holders - Steady rest - Live centre - Chip tray - Chuck guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cat No.: 26-0064 Features Volume 1000 L Material No. V2A Exterior Surface IIID Surface inside IIID Total height 1845 mm Cylinder height 1250 mm Diameter 1130 mm Weight 184 kg Description Topsoil: Clapper bottom Threaded Socket DN50 Manhole CIP Connector Airlock connection DN50 Cylinder: Cooling jacket Insulation Level indicator Sample tap DN25 Dip Shaft Sleeve for Thermometer Underbody: Forward-drawn residual drain pipe with disc valve DN50 4 feet
A Takamatsu CNC twin-spindle turning and milling center is available. 1) Turning diameter: 190mm, turning length: 150mm, max. one-sided machining length: 440mm, max. bar diameter main spindle/counter spindle: 51mm/42mm, spindle nose 1/2: A2-6/A2-5, spindle bearing 1/2: 100mm/85mm, main spindle bore 1/2: 52mm/43mm, spindle speed: 5000rpm, tool stations: 2×12, travel X1/X2: 162.5mm/170mm, travel Z1/Z2: 500mm/500mm, travel Y: +/-35mm, travel A: 550mm, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2100mm, weight: approx. 7400kg, control: Fanuc 32i-B. 2) TOP Automazioni FU350SX bar feeder, max. bar capacity: 52mm, max. bar length: 3200mm, max. remnant length: 300mm, max. feed rate: 30m/min, max. bundle weight: 2000kg, machine dimensions X/Y/Z: approx. 4300mm/1400mm/1200mm, weight: approx. 1200kg. 3) LTA E 120-X-2-H filtration system, year of manufacture: 2022, filter stages: 2, extraction ...
: 0330 mm : 210 mm : 1000 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer used accessories at a special net price. 40 x tripod/support leg, used = 15,00€/piece 127 x clevis/four-way head, used = 4,50€/piece If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Ulmer Straße 1 89614 Öpfingen Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
Sharp TC11 Table Cutter Volume: 11 litres very good condition completely in stainless steel 2 courses 3 cutter head Machine comes from a hobby butcher who gave up for reasons of age despite its good condition, the device must be thoroughly cleaned before use Video about test run available
A complete Krones bottle cleaning and filling line is available. Throughput: 8000bottles/h, carousel pitch: 161mm, carousel diameter: 1800mm, filling valves: 50. This is a complete rinser and filler monoblock for glass and plastic bottles. Documentation available. An on-site inspection is possible.
Key data: 150 KW, 400 V
K+S Gas CHP Container GTK 140 Natural gas electricity and heat generators from 2017, 25,000 operating hours, in 25 ft sea container with three MAG. 140 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 250 LB4, 250 KVA Manufacturer: K+S (Kuntschar and Schlüter) Model: GTK 140 Type: Natural Gas Electricity and Heat Generator Serial Number: 01199 Power [KWel]: 140 Power [KWth]: 212 Engine: MAN E2876 E312 Motor power [KW]: 150 Year of Make: 2017 Operating hours: unknown Weight unit [kg]: 8,000 Dimensions LxWxH [m]: 6.0 x 2.45 x 2.9 MarelliGenerators MJB 250 LB4 AC Generator Manufacturer: MarelliGenerators Model: MJB 250 LB4 Type: AC Synchronous Generator Serial Number: MBM13972 Power [KVA]: 250 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 361 Speed [1/min]: 1,500 Year of Make: 2017 Weight [kg]: 705
TECHNICAL DATA: Working length: min. 350 mm – max. 3000 mm Working width: min. 20 mm – max. 230 mm Element thickness: min. 12 mm – max. 70 mm Feed speed: 10 to 50 m/min Installed power: 1.5 kW
A complete central plastic granulate drying and conveying system Werner Koch, which was extensively expanded and modernized in 2021, is available. 1) Koch CKT 300 dry air dryer, year of manufacture: 2003, power: 41kW, air capacity: 300m³/h. 2) Koch CKT 500 dry air dryer, year of manufacture: 2021, power: 51kW, air capacity: 500m³/h, control system: Siemens S7. 3) 26x drying hoppers, volume: 11x40l, volume: 13x100l, volume: 2x150l. 4) 38x machine hoppers. 5) 2x Busch vacuum pumps. 6) Automatic Koch Navigator material distribution system, inputs: 26, outputs: 38. Including control cabinets and a central visualization and monitoring system Supervisione 9-7000. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
