filler and capper used for sale

WEILER LZ330 / From educational institution incl. new 3-axis digital display -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg

VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG

GALLIC 16 N lead and pull spindle lathe with ACU-Rite digital display - Turning diameter over support 200mm - Turning diameter over bed 320mm - Tip height 160mm - Center width 1000mm - Speed range 45-2500 rpm - Spindle bore 40mm - Automatic feeds X/Z axis -Spindle bore approx. 42mm -Quick-change holder -Thread/Metric/Inch etc. -Tailstock MK 4 -Electric lining protection -Three-jaw chuck -Swarf back wall LxWxH 2.4x1x1.7 meters / Weight 1600Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder rotary flash -4 lathe chisel holders Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Key data: 410 mm, 800 mm

TECHNICAL DATA Lathe Weisser Heilbronn Model No.: SENIOR Y.O.M. 1984 Centerheight 410 mm Swing over bed 810 mm Swing over Support 564 mm Spindle bore 105 mm max Workpieceweight between chuck and Pinole 22 tons Spindlerevolotions 8 -- 1250 Rev/min Main motor 15 kW Rapid traverse longitudinal 4 Jaw chuck 700 mm Moving Protection for guideaways longitudinal Digital Read Out 1 Steady Rest 0 - 130 mm Quick change Toolpost with inserts Coolant

Frey K 120E Filling Machine, Vacuum Filling Machine, with twisting gear, new vacuum lid (the photos are still the old one), Connection 400V, weight approx. 470kg, good used condition, functional

Machine for cartoning glass bottles, for packing the carton packages on trays with subsequent shrink film wrapping., Additional title: Five‑step machine, Capacity: 26000 bo/min when packing 24 x 0.33 litre bottles, Cycle time: 18 cycles/min when packing 24 x 0.33 litre bottles, Formats: Trays with 4 x six-packs or 3 x eight-packs for 0.33 litre bottles, boxes with 20 x 0.5 litre bottles also possible, Features: Tray erector/adhesive application (Nordson ‘Problue Flex’, built in 2021), carton packer, tray packer, shrink film machine, drying tunnel, date coding (best-before date marking)

A horizontal flow pack packaging machine RGD Mape is available. Packaging speed: 30m/min, max. packaging capacity: 100packages/min, product length range: 30mm-450mm, product width range: 10mm-240mm, product height range: 10mm-120mm, max. film width: 600mm, max. film outer diameter: 350mm, film core diameter range: 60mm-110mm, max. film roll weight: 35kg, machine weight: approx. 450kg. Documentation available. An on-site inspection is possible.

Fully automatic bread slicer MHS Type: MHS IDEAL SB Technical data: Round knife cutting bread slicer Oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm automatic bread grippersuitable for all types of bread with bread rack for bagging with sight glass cover for optimum safety during the cutting process. Clean without having to move the machine 230 Volt / 1.0 kW / 4.8 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg Mobile on 4 pulleys with 2 brakes Year of Make: 2011 Function checked, machine ready for immediate use!

Used Plastic - Tube Filling and Sealing Machine Manufacturer: TGM Type E250 MATIC Year of construction 2006 Capacity: 800 – 3,200 tubes / hour Tube height: 50 – 235 mm Diameter: Ø 10 mm – 50 mm Closure: Hot air device (HA) Tube Loading Station with Magazine, Tube Alignment, Presence Control Tube, Tube Centration, Filling Station, Hot Air Group, Tube Coding, Tube Cutting Station, tube output, Various format sets and spare parts

MultiFlex superfinishing machine for machining cylindrical and wave-shaped workpieces with superfinishing belt. Machine type: Multiflex 722/2 Machine No.: 770041 Technical data Superfinish strip processing of handlebars Workpiece length: max. 1000 mm Workpiece diameter: max. 100 mm Ball screw diameter: max. 35 mm Condition: Technical – good / Optical – used (Pictures partly similar)

BaseFlex 1300 superfinishing machine for machining crankshafts and camshafts. Machine type: BaseFlex 1300/1 Machine No.: 770046 Technical data Superfinish strip machining of crankshafts and camshafts Center width: max. 1300 mm Stroke: max. 180 mm Loading height: max. 1000 m With pallet conveyor Condition: Technical – good / Optical – used (Pictures partly similar)

CenFlex 1 superfinishing machine for machining crankshafts, camshafts and cylindrical shafts. Machine type: CenFlex 1 Machine No.: 770054 Technical data Superfinish strip processing Strip processing Workpiece length: max. 1000 mm Stroke (KW): max. 100 mm Devices: 5 Condition: Technical – good / Optical – as good as new (Pictures partly similar)

Nano superfinishing machine for surface machining of gears, sealing components, injectors. Machine Type: Nano Machine No.: 770057 Technical data Superfinish plan machining Standard version with fire extinguishing system Workpiece length: max. 150 mm Workpiece diameter: max. 100 mm Processing diameter: max. 50 mm Meitec In-Process Measurement Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

CenFlex 1 superfinishing machine for machining crankshafts, camshafts and cylindrical shafts. Machine type: CenFlex 1 Machine No.: 770054 Technical data Superfinish strip processing Workpiece length: max. 1000 mm Stroke (KW): max. 100 mm Devices: 5 Condition: Technical – good / Optical – as good as new (Pictures partly similar)

RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex Machine No.: 780695 Technical data Superfinish Stone Processing Outer diameter: 20 – 200 mm Inner diameter: min. 10 mm Width: max. 130 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex 725-727/1 Machine No.: 770062 Technical data Superfinish Stone Processing Workpiece diameter: max. 200 – 650 mm Workpiece width: max. 100 – 250 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Superfinishing machine RacePro 4000 machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RacePro 4000 Machine No.: 780698 Technical data Superfinish Stone Processing Outer diameter: max. 4000 mm Inner diameter: min. 1200 mm Width: max. 400 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Superfinish machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RaceX Machine No.: 780700 Technical data Superfinish Stone Processing Outer diameter: max. 320 mm Inner diameter: min. 40 mm Width: max. 260 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360034 Technical data Superfinish Stone Processing External cylindrical machining in continuous use Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Technical – very good / Visually – very good (Pictures partly similar)

Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360039 Technical data Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Technical – very good / Visually – very good (Pictures partly similar)

Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360041 Technical data Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Factory New (Pictures partly similar)

Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels., Additional title: Keg spraying and keg brushing, Max. capacity: 300 Kegs/h, Capacity keg filling plant: 110 Kegs/h, Voltage: 220/380 V, Frequency: 50 Hz, Length: ca. 2200 mm, Width: ca. 1500 mm, Formats: 30-litre and 50-litre kegs, EU format, with PU jacket, Features: Spray jets, high-pressure pump, brush station, label discharge

5 fermentation and storage tanks (104 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap and central outlet. 1 white beer fermentation tank (81 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap, yeast chute and central outlet. 1 batching/flotation tank (122 hl) with flat conical base, frame and cone cooling zone, manhole, sampling tap and central outlet. The tanks are also available individually or in partial quantities., Additional title: 7 pcs. of vertical, coolable stainless steel tanks, Volume fermentation and storage tanks: 10474 l per piece, Volume wheat beer tank: 8071 l, Volume flotation tank: 12242 l, Material: stainless steel 1.4301, Position: standing on feet, Features: Flat conical bottom, frame and cone cooling zone, manhole, sampling tap, central spout, yeast chute

Combi filter (kieselgur- and sterilising filter) for beer filtration with hydraulic pressure, 100 x 100 cm filter plates and external risers., Additional title: combination filter, Capacity: 12000 l/h, Plate size: 100 cm edge length, Length: 7000 mm, Width: 1500 mm, Height: 1500 mm, Position: horizontal, Base construction: mounted on steel frame, standing on feet, Features: 31 kieselguhr layers (32 frames), 50 sterilisation layers, 4 pressure manometers (10bar), 6 lanterns, risers, kieselguhr discharge screw (Allweiler), gravity measurement, flow measurement, 3 x turbidity measurement (inlet, outlet Kieselgur filter, outlet 3 x turbidity measurement (inlet, outlet kieselgur filter, outlet sterilisation filter). Spare parts: 295 sealing rings for filter plates, 3 kieselguhr filter support plates

This label and fill level inspection system from Heuft Systemtechnik GmbH (built in 2010) is designed for high-frequency fill level inspection, label checking, and product rejection. The system features the Heuft Delta FW 10 rejection unit for precise and reliable removal of non-compliant bottles. With a capacity of up to 40,000 bottles per hour, it enables efficient quality control in high-speed production lines. The device has a compact footprint of 0.44 m × 0.80 m × 2.24 m and weighs 150 kg, making it easy to integrate into existing filling lines. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: Heuft Spectrum TX, Capacity: 40000 bottles/h, Length: 0,44 m, Width: 0,80 m, Height: 2,24 m, Weight: 150 kg, Features: Heuft ejection unit Delta FW 10

This vertical stainless steel tank from Christian Gresser Behälter- und Anlagenbau GmbH is designed for the efficient storage and processing of liquids, has a volume of 11 hl and an operating temperature of up to 50 °C. The tank has an insulated base construction and is equipped with a cartridge heater, a level indicator (hose), a sampling tap, a manhole opening with cover, an overflow, and two outlets with manual valve flaps, making it extremely versatile for various process applications. It has a width of 1 m, a height of 2.6 m, and a weight of 350 kg. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: heatable, vertical stainless steel tank, Volume: 1172 l, Operating temperature: 50 °C, Power: 25 kW, Voltage: 400 V 3~, Width: 1 m, Height: 2,6 m, Weight: 350 kg, Material: stainless steel, Position: vert ...

Tensile and compression tester Manufacturer: Zwick Type Z2.5/TN1S Included Force transducer 2 kN Pneumatic Specimen Holder Pneumatic control unit testExpert testing software Upgrade Packet testExpert II Documentation Calibration certificates Documents available

Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...

Belt width: 600 mm, Cooking length: 9000 mm, Heating: thermal oil, 240 kW, Steam: 4-8 Bar, 900 kg/hr at 95°C, Water: 3-5 Bar, 0.5m³/hr, Compressed air: 6-8 Bar, 120nL/min, Power: 3 x 380V, 50Hz, 9.2kW, Dimensions: 10200 x 2000 x 2750 mm, Weight: 6250 kg

Belt width: 600 mm, Grillength: 13000 mm, Retaining time: 2.5 - 50 min., Heating: thermal oil, 300kW, Steam: 4 - 8 Bar, Power: 3 x 400V, 50Hz, 18kW, Dimensions: 15000 x 2200 x 3100 mm, Weight: 10000 kg

Belt width: 700 mm, Length: 1450 mm, extendable to 1800 mm, Power: 3 x 400V, 50Hz, 0.18kW, Dimensions: 1450 x 1000 x 1200 mm, Weight: 175 kg

A combined rotary bottle filling and capping machine MAG Schymanski (filling monoblock) with capping heads renewed in 2023 is available. Capper manufacturer: Arol, capper type: Euro VA, filling system: rotary filler, filling valves: 28, capping heads: 4, filling capacity range: 3500bottles/h-6000bottles/h. Documentation available. An on-site inspection is possible.

internal grinding spindles: . centre height: 240 mm grinding length: 2500 mm grinding wheel diameter: 750 mm Dimensions (L/W/H): 6000 x 3000 x 2500 mm weight of the machine ca.: 9 t Internal grinding attachment with grinding spindle Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing length max.: 406 mm honing diameter: 1.5 - 165 mm spindle turning speed range: 200-2500 U/min weight of the machine ca.: 0.6 t dimensions of the machine ca.: 1.3 x 1.35 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing length max.: 406 mm honing diameter: 1.5 - 165 mm spindle turning speed range: 200-2500 U/min weight of the machine ca.: 0.48 t dimensions of the machine ca.: 1.3 x 1.35 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used combination weigher and raw material feeder manufactured by Ocean System. New: 2019. Technical specifications: 10-head model Power supply: AC 220V Frequency: 50/60 Hz Current: 10 A Power: 1.0 kW Number of heads: 10 Weighing range: 10–1000g Dimensions (L/W/H): 1105/1027/1250 Tray capacity: 1600ml Max. speed: 65 doses/min Number of programmes: 0–99

This Palletising line consists of, Box transport belts, KRONES, Type 465, Model Κ465-924, Y.o.M 1999, Maximum width 350mm/ total length 13m/ 6 pieces (2m/piece)/0.75KW- 400V/ control panel, Palletizer, KETTNER, Type BELADER PRESS ON, Model 99/0441/004, Y.o.M 1999, Available control panel (30 pulses/hour in 61.5L box), Empty pallet station with finished pallet exit roller conveyor, KRONES, Type 454, Model LPMT, Y.o.M N/A, Maximum number of empty pallets: 15pcs/ Available control panel/ 100pallets/hour, Strech Wrapping Machine, FRANPACK, Type 101, Model 991553, Y.o.M 1999, Available control panel, Protective barriers with safety switches, Available with the machines, Available: Immediately , Pallet Sizes: 100 x 120 cm , Capacity: 100 pallets per hour , Condition: Good

Used Filling Monoblock Metalnova for still and sparkling water 12000 bphThe Used Filling Monoblock Metalnova for still and sparkling water 12000 bph, model LG, offers a bottling solution designed to process still and sparkling water in 2-liter containers, with a production capacity of 12,000 bottles per hour. Manufactured in 1997, the machine is currently dismantled and in storage. It operates in a counterclockwise direction and supports both PET and glass containers, thereby ensuring flexibility for mixed-format bottling lines. Moreover, its design allows seamless integration into existing production environments.Monoblock Configuration and Bottle Rinsing ProcessThe monoblock begins with a rinsing unit equipped with 60 grippers, which has been engineered to clean containers thoroughly before filling. Notably, the system performs two treatment phases, which not only remove impurities but ...

Used filling monoblock for Oil and spirits – Polaris model B6 – speed max 1500 BPH WHY CHOOSE A POLARIS LINE mod B6 for OIL and spirits; We summarize the main characteristics of our used filling monoblock; and which make them UNIQUE on the market: • Elasticity of work that allows you to switch from one bottle format to another. Acting with simple operations and without replacing parts of the machine; this flexibility is also particularly suitable for those who carry out the third party. • Speed ​​of the format change that can be carried out from 10 to 30 minutes at the most. Given the reduced times, the line can be easily used even for small production batches. • Use of any bottle format; cylindrical, square, triangular, amphorae, flasks, etc. from 0.100 to 2lt in glass and PET. • We designed our labeling system, in such a way as to guarantee the maximum laying precision, ...

Processing and Filling Line for Dairy Products up to 20,000 L/Day This processing line efficiently manages volumes between 15,000 and 20,000 liters of milk per day. Consequently, it ensures high efficiency and the highest quality of finished products. Its capacity thus enables a high daily production return, which is crucial for large-scale operations. Packaging Capabilities Moreover, the line’s specialized packaging system adeptly handles various types of dairy products. For example, workers pack milk in 1.0-liter PVC bags at a rate of 2,400 pieces per hour. Additionally, they package yogurt and kefir in 410-gram and 180-gram containers at a capacity of 3,000 pieces per hour, as well as in 0.5-liter and 1.0-liter PET bottles at a rate of 1,000 pieces per hour. Furthermore, workers package sour cream in both 1,000-gram containers and bowls, each at a capacity of 3,000 pieces per hour.  ...

A modular profile and edge belt sanding machine is offered for sanding solid wood and veneered edges in continuous operation. Feed rate: 5-25m/min, Units: 5, Workpiece thickness range: 12mm-60mm, Conveyor chain: 80mm, Sanding belt length: 2000mm, Sanding belt width: 20mm/35mm, Belt speed: approx. 7m/s, Max. working radius: 12mm. Machine dimensions: approx. 2670mm/1200mm/1800mm. Weight: approx. 1200kg. Documentation available. Inspection possible by appointment.

Key data: 2300 KW, 10500 V

FOR SALE – NEW MWM TCG 3020 V20 CHP Gas Engine Units – 2,300 kW, 10.5 kV, 50 Hz BSC Group offers two brand-new MWM TCG 3020 V20 Combined Heat and Power (CHP) units, manufactured in 2026 and available immediately from our warehouse. These containerized Plug & Play CHP units are designed for reliable and highly efficient power generation using natural gas. Technical Specifications Manufacturer: MWM Model: TCG 3020 V20 Year of Manufacture: 2026 Quantity Available: 2 units Fuel: Natural Gas Electrical Output: 2,300 kW per unit Generator Voltage: 10.5 kV Frequency: 50 Hz Configuration: Containerized Plug & Play

Technical Specifications & Performance DataThis used bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for sparkling and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molding machine upstream of the filling monoblock section, ideal for flexible maintenance and line balancing.Production speed: 25,000 bphBottle formats: Compatible with 0.5L bottle formatContainers: Designed for PET bottle handlingConfiguration: Non-combi (separate blow molding and filling)Main components and years: Sidel Universal SBO 14 blow molder (2007), Sarcmi 70-10 ISO Filling Monoblock (1988 – Overhauled in 2025), Labeling machine Sarcmi (2011), Shrink wrapper Zambelli (2004), Handle applicator (2004), Palletizer ACMI double-head (1992).Advanced Automatio ...

Offered is a special drilling and thread-cutting machine Frielingsdorf, equipped with four Ayen drilling units. Machining directions: 3×side, 1×top, setup: rotary indexing table, speed of side drilling units: 960rpm, speed of drilling unit from above: 1400rpm, motor power per drilling unit: approx. 0.73kW, control: conventional. Machine dimensions X/Y/Z: approx. 2600mm, 1500mm, 2600mm, footprint without side lines/containers: approx. 3.5m², weight: approx. 1500kg. Inspection possible by arrangement.

Used complete bottling line for CSD in PET and glass - 8000 bphTechnical Specifications & Performance DataThis complete used bottling line is engineered for beverage production with PET and glass bottles. Optimized for water and carbonated soft drinks, it combines reliable filling, labeling, and end-of-line packaging with robust utilities and process equipment. The line integrates components from reputable manufacturers to deliver consistent quality and uptime in industrial packaging environments.Production speed: up to 8,000 bottles per hourCompatible bottle formats: 0.33L, 0.5L, 0.75L, 1.0L, 1.5L, 2.0LContainers: PET and Glass bottlesMain filler/capper/rinser: Sinkrofill 40/50/10/10, 50 filling heads, 3–5 capping headsBlow molder: Easy Blow 4L (4,200 bph nominal)Labelers: Gernep Rollfed 8-480-1RA (foil/OPP) and Gernep Soluta 10-640 3SK (paper), up to 10,000 bphPack & handle applicati ...

Used Bottling Line for champagne, sparkling and still wine 4000 bph Product Compatibility and Filling Technology This bottling line processes still wine, sparkling wine, and champagne with high efficiency. Specifically, it handles only glass bottles and uses an isobaric filling system, which ensures precise control when filling pressurized liquids, such as sparkling products. As a result, wineries that produce multiple wine types with different physical and chemical properties can rely on this line for consistent, adaptable operation. In other words, the system addresses diverse product demands without compromising output quality. Performance Output by Bottle Format Depending on the bottle format, the line delivers different outputs. It processes both 0.20l and 0,375l bottles at 4,500 bottles per hour. Meanwhile, it handles 0,75l bottles at 4,000 bottles per hour and 1.5l bottles at 2,00 ...

Blowing and Sterilization station MCF Trade Model 2 Never used. This machine allows the washing of glass containers of various sizes, by means of a jet of air and steam. Automatic blowing and sanitizing station fast model with sterile air for the elimination of any foreign bodies inside the containers, also prepared for steam injection to sanitize and heat the containers. The blowing station is a machine designed for washing glass containers of various sizes (see photo). The machine essentially consists of a linear conveyor belt that places the containers on a single row. These pass through a tilting group formed by a clamping system that can be adjusted according to the format to be processed. Once the containers are overturned; they descend onto nozzles with adjustable distance and height in order to better center and clean the containers. At the end of the operation, the containers re ...

Used Complete Bottling Line for PET and Glass 2007 Year: 2007 | Speed: 14,000 bph | Containers: PET and glass | Formats: 250 ml, 600 ml, 1 L | Products: Juice, still water. This PET bottling machinery is configured as a full factory line with depalletizing, blow molding, rinsing, filling/capping, inspection, pasteurization, packing, and palletizing. Ready for operation. This listing is used equipment for PET bottles and glass bottles in the stated formats. Depalletizer: Icon (2007) Blow Molding Machine: Sidel SBO 10/14 Four (1994) Rinsing Machine: Gem (2007) Filling Monoblock: Icon 5000 30/10 (2007) Labeling Machine: Kosme Merkur 16 T S1 S2 ADV (1995) Capping Machines: Arol EURO/PK (2007); Alcoa VK-138 Headset 55950 (2007) Inspector / Induction Sealer: Enercon (2007) Pasteurizer: Tetra Pak® (2007) Wrap Around Packer: Dimac Star Wrap 25 (2007) Lane Divider: SMI DIVIPACK 200 (2002) Pallet ...

Used Pieralisi malazers with control panel and P60 pumpsTechnical Specifications & Performance DataThese Pieralisi olive oil malaxers are second hand processing units designed for the malaxation stage in industrial olive oil extraction lines. As a key step between crushing and centrifugal separation, the malaxers homogenize and condition the olive paste to optimize oil yield and quality. The units are currently installed and have been maintained with regular annual service and cleaning. Suitable for integration into a used bottling line or broader industrial packaging and processing environment, they provide reliable throughput for producers seeking dependable performance in food and beverage production facilities.Manufacturer: PieralisiYear of manufacture: 2000Process role: Malaxation/kneading of olive paste prior to decanter centrifugeIndicative capacity: approximately 20 quintals/hour ...