filler and capper used for sale

used vacuum thermoforming machine from Illig in very good condition little used immediately ready for use Dimensions 6 by 5 meters incl. control cabinet and corresponding phereperie devices Pictures to follow

VERTICAL MULTISTAGE PUMP C/W 4KW MOTOR, 4 POLES AND 50HZ

Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk

Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk

Cylindrical, Vertical stainless steel tank 25BBL Working capacity Supplied By East field Process Diameter Approx 2400mm Overall height Approx 2850mm Top entry man way door External cooling Jackets on tank shell Insulated with stainless steel cladding over Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

A used BECK flow wrapping machine Serienpacker is offered. Fully automatic film packaging machine with 4-side sealing principle, operates with two flat film rolls upper and lower film, processing films PE, PP, polyolefin. Inspection by appointment possible.

1000l Cylindroconical Vessel Vertical stainless steel tank Floor Length Cladding Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 2300mm Side entry man way door with DIN 15 Male Sample Port Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Temp Probe Pocket Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000L Vessel - Dish Bottom Vertical stainless steel tank Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 1900mm Side entry man way door with DIN 15 Male Sample Port and Sample Tap Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male Temp Probe Pocket 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000l Vessel - Dish Bottom Vertical stainless steel tank Diameter Approx 1050mm Overall height Approx 1650mm Side entry manway door Single skin stainless steel 1.5" RJT Top and Bottom Fittings Sight Glass DIN 80 Top fitting for gas vent 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

• s/s-style, adjusted for filling and closing of vials/bottles • 2 filling stations for steady objects, object-dia for round objects 16-100 mm, for flat objects 16x16 - 100x100 mm, h 35-310 mm, according to change parts • Output max. 3,000 objects/h according to product • Filling area 0.3-540 ml/bottle according to pumps, with 2 one after the other installed s/s-rotary piston pumps each 2 pumps each 8 - 50 ml • Single filling (max. 50 ml) and step filling (max. 100 ml) possible with existing pumps • Drip retraction • 1 Hand-over station for screw caps dia 22,0 x 20,5 mm with screwing tool and sorting bowl • Change parts for bottle-dia 24,2 x H 63,7 mm, dia 28,6 x H 71,5 mm, dia 37,7 x H 92 mm • 2 sets dosing needles, each 2 pcs, several dia • PLC Klöckner Möller PS4-201-MM1, touchscreen • Eectr. connection 220/380V/50Hz

Porter Lancastrian 1500L/10BBL Vessel - Second Hand Vertical stainless steel tank Manufacture: Porter Lancastrian Dished Top & Bottom Diameter Approx 1000mm Overall height Approx 2900mm Single Skin Stainless Steel Inlet 1" RJT Side Manway Sight Level Tube Front Sight Port 3 x Legs Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

2 Head Automated Cask Washer - Second Hand 2 heads cleaning, stainless steel cask washer, with rotating spray balls. Heated detergent tank Air Actuated Valves Single Phase 240 Volts Manufactured by ABUK - 10/07/2004 Serial Number: AB06 For more information and more available stock please visit us at - advancedbrewing.co.uk

plate thickness: 4 mm roll diameter: 125 mm throat: 200 mm total power requirement: 2,2 kW weight of the machine ca.: 0,48 t dimensions of the machine ca.: 1,6 x 0,6 x 1,2 mm Exhibition machine, unused. • 5 speeds • Foot control • Brake motor • Emergency stop • Hydraulic roller adjustment • Special tool set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Banding / Banding Machine ATS Tanner Type US 2000 LB With ultrasonic tape welding, suitable for plastic and paper tape with a width of 30 mm. Powerful, proven and universally applicable (see video below). Versatile, infinitely adjustable via two potention meters/rotary controls in terms of belt tension and belt length. Tape can be added later via pressure switches if necessary. Counter currently shows around 740,000 work cycles. Offer price 3000,- EUR EXW or 3,500 EUR incl. packaging & shipping with transport insurance.

A Lips mixer, beater and roller grater is available. Mixer: bowl volume: 40 l, dough hook, mixing blades and whisk. Whipping unit: 2x 4-finger whisks, dough hooks, 5x whisk blades, 6x whisks and 9x bowl (volume: 10l-35l). Roller unit: hopper, round bowl, square stainless steel bowl, scraper and gripper guard. Machine dimensions X/Y/Z: approx. 2350mm/900mm/1350mm, weight: approx. 900kg. Including various accessories. The wood hopper of the roller must be replaced. If required, the gas burners must be retrofitted.

A die-cutting and embossing machine Woschnik + Partner is available. Stroke rate: 9000/h, max. sheet dimensions X/Y: 820mm/1130mm, min. sheet dimensions X/Y: 360mm/400mm, gripper margin adjustment: 10mm-17mm, closing frame dimensions X/Y: 820mm/1134mm, max. die-cutting dimensions X/Y: 800mm/1120mm, cutting rule height: 23.8mm, max. punching force: 4000kN. Machine dimensions X/Y/Z: approx. 8000mm/2650mm/2950mm, weight: approx. 30000kg. Documentation available. An on-site inspection is possible.

ATEC 1220 Ltr stainless steel vessel with anchor stirrer with scrapers (5,5kw), jacket 250 Ltr, two heaters (2x7,5kw), inlet/outlet DN50, for atmospheric pressure, control cabinet, speed controlled stirrer, on wheels

The Ilpra FS 5000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request., Cup Diameter: 95 mm Outside diameter , Filling Range: 50-500 grams , Capacity: 4800 cups/Hour , Stations: Cup Dispenser -> Filling -> Aluminium Lid Applicator -> Sealing -> Date Stamping -> Out-feed Conveyor , Guarding: Fully Enclosed Cabin , Control Panle: S ...

We supply and install our own, new, digital PLC controllers suitable for storage lifts and paternosters of all manufacturers on the market (e.g. Kardex, Hänel, Megamat, Electrolux Constructor, Zambelli, Intertex, Lista and many more). Our LTG StoreControl LL (storage lifts) and LTG StoreControl P-Touch (paternoster) control systems thus offer replacements for controls for which all spare parts are otherwise no longer available. With our controls, it is easy to connect your dynamic warehouse systems to higher-level warehouse management systems or to implement access restrictions.

Control Other Grinding length [mm] 600 Grinding width [mm] 400 Grinding spindle: Speed 1,400 rpm Power 3.7 kW Grinding wheel dimensions (max.) 300 x 50 x 76.2 mm Work table: Clamping surface magnetic clamping plate, 600 x 400 mm Table load (max.) 600 kg Hydraulic table drive Longitudinal table stroke 200 - 650 mm Rapid traverse 28 m/min Grinding area 600 x 400 x 375 mm Equipment/accessories: Measuring System Engine Measurement System in X/Y/Z Dressing system prism arm for einkorn diamond Cooling coolant system with paper belt filter, tank capacity 140 l Other equipment Partial space encapsulation, work area light

The ABL PDS 50 TT is a powerful, fully automatic apple slicing and peeling machine designed for industrial fruit processing. It combines efficiency, flexibility, and reliability—perfect for producers of fresh slices, IQF products, apple rings, chunks, cider, or applesauce., Fully automatic alignment of the fruit, combined with peeling, coring and cutting processes – all in one pass., Versatile cutting options:, - Whole, cored apples, - Segments of 2 to 18 equal pieces, - Chunks, butterflies, discs or rings (3–15 mm thick), Ideal for:, - Producers of Fresh fruit, IQF or dried apple products, - Manufacturer of Apple rings and chunks for gastronomy and retail, - Provider of Cider, applesauce, compote or juices, - Contract packer and fruit traders who want to combine efficiency and quality, power: Output up to 50 apples/min (approx. 250–500 kg/hour) with consistently high quality, Wi ...

Sorting, cleaning, blanching and peeling system for carrots and beetroot, manufactured by Komen & Kuin, Blancheur capacity:, 10 tons of carrots per hour up to 80°C,, 5 tons of beetroot per hour up to 80°C,, Maximum throughput time: 35 minutes, Dimensions, approx.:, Height: 3.50 m, Width: 3.20 m, Length: 8.20 m, matching:, 1) Sorting machines for beetroot, celery, etc. …., already sold, 2) Washing machines, Washing machine 1: Drum diameter approx. 80 cm,, Distance between the bars approx. 5 mm,, Drum length approx. 200 cm, Washing machine 2: Drum diameter approx. 90 cm,, Distance between the bars approx. 10 mm, Drum length approx. 300 cm, 3) Stoner, 4) Heat exchanger, 5) various climbing belts, 6) Read the volume, 7) various pipes, 8) Various pumps

Kilia TK20 Table Cutter 20 litre solid stainless steel bowl 2 courses 6 mm cutter head Spare blade set and fork locks included 400V Stainless steel housing smooth and smooth running, video of test run available comes from a gastronomic business in which meat loaf was made with it

Capsule applicator and shrinker, make Enos, type Capsulatrice 1T., year 2015, for closing PVC capsules, with protective covering according to CE regulations, made of AISI 304 stainless steel,, Capacity: up to 2,500 bottles with PVC capsules,, up to 1,700 bottles for capsules made of aluminium, tinfoil, polyamine, This machine can be used for bottles of the formats:, Hmin= 230mm; Hmax= 370mm;, diameter min= 60mm; max= 110mm., Suitable shrink capsules should be made of PVC with dimensions:, Hmin= 35mm; Hmax= 70mm;, diameter min= 20mm; max= 40mm., The dimensions of the capsules used so far were:, H= 40mm; Diameter 32.5mm, The machine was used for the following bottle diameters:, 42mm; 52mm; 65mm and for a square bottle with LxW 45x45 mm., All moldings for these formats are for sale. Operating instructions are available., power: up to 2,500 bottles / hour, Dimensions / weight: L x W x H: app ...

This machine automatically places a cloth or paper doily on the glass and usually secures it with a rubber band or string., Capacity: approx. 30 glasses / min,, The machine requires compressed air, oil and water free., power: approx. 30 glasses / min

1x Mimot MX216 SL, built 03/2010 1x Mimot MB300 216 ML, built 01/2012 We also have both the infeed and outfeed belts for both machines. Find more here - / Contact us at -

Adhesive label printer and applicator, brand Logopak, type 920 III TE, year 2012, Logopak - Type 920 III TE, year 2012 for printing and applying labels on packaging and pallets,, for labels up to 210 mm width,, Labeling using pressing brush on the stamp diagonally,, with blinds,, Label roll diameter: 400 mm, 76 mm core (150 mm adapter),, Throughput: 15 labels/min. (idle labeling).

A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. ...

Herlitzius A2000 continuous bread slicer - Continuous bread slicer - Manufacturer: Herlitzius - Type: A2000 - Adjustable cutting width Technical data: - Voltage: 400 volts - Control voltage: 24 volts - Connected load: 2.5 kW - 50Hz

turning diameter over bed: 930 mm turning diameter over slide rest: 630 mm turning length: 6000 mm turning dia. in gap: 1250 mm spindle diameter: 95 mm speed: 8-800 (x24) U/min total power requirement: 22 kW weight of the machine ca.: 1100 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 890,820 mm turning length: 4000 mm control: Siemens SIN 880T spindle taper: DIN 55026/15 spindle passage: 122 mm cross movement: 500 mm quill stroke: 140 mm tailstock adjustment: 3708 mm spindle turning speed range: 5-1800 U/min milling tool taper: 1500-6000 U/min feed: 0,5-5000 mm/min rapid traverse: 15 m/min feed power: 22000/10000 N Tool changer: 95 St. steady: CNC tail stock: CNC total power requirement: 50/69 kW weight of the machine ca.: 23,5 t dimensions of the machine ca.: 10x4x3,3 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, produc ...

Bottling plant with canteen kitchen, which is located in a complete enclosure, is sold due to site closure. 7 pieces of Schneider cooking kettles in V2A double-walled heated with a 24KW) 400 litres (together 2800 litres!) and a Nüssler extraction system and a Novapack filling system (rotary machine) with LFA air filter system and complete equipment for filling currently 500 gram cups with UV disinfection solution for cups and circuit boards. Plastic lids are placed fully automatically after capping. See photos for details. Various accessories and spare parts are also sold as the site is closed. The facility has been proven to have been used very little and can still be visited until the end of March 2026. System available immediately from site. Lead time for optional dismantling and delivery and assembly currently approx. 2 weeks. A bottling plant with a commercial kitchen, housed in a ...

Key data: 170 mm, 350 mm, 3250 U/min

Lead and pull spindle lathe Colchester Master VS 3250 Tip height 170mm Center width max 750mm Circulation over bed max 350mm Circulation via cross slide 196mm Spindle bore 42mm Spindle D1-4" Spindle speeds from 0 - 3250 by means of VFD and 3 gear stages Tailstock MT4 Incl.: Digital display on 3 axes Elesta Quick-change steel holder Multifix with 7 tool holders 2pcs 3-jaw chuck 160 and 250mm with 3 set of jaws Collet holder with lever with 23 collets 173E Kornerspitse Drill chuck Coolant Pump Tool cabinet with tools and manuals Cleaned and maintained

KEG wash and fill, 7-10 KEG/h, manual, new

KEG wash and fill, 20-30 KEG/h, automatic, new

Used line for packaging tablets and capsules in PET packaging Line composition: 1. DT PACKAGING SYSTEM UNSCRAMBLER1000S rotary sorter 2. DT PACKAGING SYSTEM CONVEYOR CONTROL conveyor for counters 3. DT PACKAGING SYSTEM CONVEYOR CONTROL conveyor for counters 4. B8P/3DUPLEX counter 5. B8P/3DUPLEX counter 6. Elevator 7. ML657 cap setter 8. Desiccant hopper 9. Cap hopper 10. PACK SERVICE PREALIMENTATORE lid elevator 11. PACK SERVICE TAVOLO ROTANTE PS160 buffer sorting wheel 12. PACK SERVICE TAVOLO ROTANTE PS160 buffer sorting wheel 13. Neri labeler SL200 14. Marchesini MA155 cartoning machine 15. Type C Transporter

BJ Band Saw Kasto SBL 280 U 1998 Conventional lathe E3N01 Lathe Hurco TM8i Surface Grinding Machine FSG-1640AD Wagner 1997 Silent E Forklift R20-15 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX30t 3-axis milling machine Hurco VMX64 Wire EDM Machine Mitsubishi FA20 Zeiss Contura G2 CNC Coordinate Measuring Machine 2007

Tip height: 125 mm Center width: 800 mm Gr. turning Ø over bed/over carriage guide: 280/245 mm Spindle holder, thread according to DIN 800 Spindle bore: 24 mm Spindle speeds infinitely adjustable: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 Inch Thread: 4 - 112 Gg/" electr. Connection: 380 V, 0.7/1.4 kW Space requirements: Weight approx.: 500 kg

Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm

A CNC large-format rigid-bed milling and boring center Soraluce is available. Travel X/Y/Z: 4500mm/1600mm/1300mm, table dimensions X/Y: 6000mm/1100mm, max. table load: 5000kg/m², spindle bearing diameter: 90mm, tool holder: ISO 50, speed: 5000rpm, power: 43kW/32kW, rapid traverse: 35m/min, feed force: 16kN, coolant volume: 350l, delivery pressure: 5bar, tool positions: 40. Machine dimensions X/Y/Z: approx. 8700mm/5000mm/3850mm, weight: approx. 22000kg, control: Heidenhain. Including IKZ, chip conveyor, probe, tool probe and cooling unit. Documentation available. An on-site inspection is possible.

We are selling here a boiling kettle / pressure cooker from the manufacturer ELRO, type DBGN33-EDS-89.0-0 in a very good used and functional condition. Runs on 400 volts, 23.5 kW, year of construction 2005, 170 litre capacity, digital control, programmable, completely stainless steel, water inlet, workshop tested, immediately ready for use, dimensions W/D/H 140/85/100 cm, others on request.

3-piece consisting of connector FFS-00.250.CTCE31, apparatus box ERN.00.250.CTL, Anti-kink grommet Desmopan white type GMD.00.028.DB, Price for dismantled parts, Parts can also be purchased individually= Plug, Apparatus Socket, Kinking Protection Grommet, Request Single Price

Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. The machine is currently set on 10 gram. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed with a hopper with agitator screw inside, mechanically drive from out of the main machine (tooth wheels and axles). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil (correct by brake system). If there is no foil at the first folding station, the machine will stop. Mechanical belt driven outfeed conveyor of ± 1.000 mm, mounted 90° on the machine to the semi automatic case packer, Benhil 8534. The Benhil 8304 ma ...

Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. This machine was serviced by the previous owner and is in a as good as new condition with new controls with frequency converter (renewed in 2023). The machine is only used some weeks for trial production by the previous owner. The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed by a direct connection with compensator (build on the machine) or with a hopper with agitator screw inside, mechanically drive from out of the main machine (loose delivered wit h the machine). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print ...

LNS PB 80 / Bar Chamfering Machine / Sharpening Machine -CE marking - Chamfer diameter - 30 degrees 8-80mm - Chamfer diameter - 45 degrees 8-60mm -Turning diameter 10-60mm -Max turning length 40mm -2x speeds -Power 0.0-1.65 KW -Three-jaw chuck -Adjustable material support -Documentation Dimensions: LxWxH 1x0.7x1.6 meters / Weight 400 kg

Rotary double head cup filling, sealing machine and snap capping machine for pre-formed yoghurt cups. 8-Stations. Preformed cup destacking, empty station (space for a pre doser), double head main piston doser with hopper (current set on 200 - 250 ml, CIP cleanable), pre formed seal mounting station, hot sealing station, empty station (space for date coding), snap cap station and outfeed station (2 pieces at the same time). Control panel with Siemens S5 PLC and operation panel with buttons, speed counter and on the other side of the machine the temperature of both sealing heads. Capacity: up to 4.800 cups per hour, depending on product, packaging material and headspace in the cup. Pre-fromed cup size: 95 mm, ± 150 - 300 ml. Machine covered in polycarbonate cabinet for a safe work environment for the operator with air filter in the roof of the machine. Manuals, electric schema and CD with ...

Complete can filling and closing line for liquids (nutrition) in 250 gram aluminium cans. Product: nutrition liquids. Formats: diameter 65 mm, height: 90 mm, filling weight 250 gram. 24x per box. Capacity: up to 500 / 420 cans per minute (30.000 / 25.000 per hour) for different parts of the line (with automatic palletiser) but the last year reduced to 325 cans per minute (19.500 per hour) because of manual palletising of the carton boxes on a pallet. Dismantling date: March / April 2026., Line exisiting out of:, 1. Preformed can de-palletiser machine, separate layer by layer from the pallet including lid sorting unit., Manufacturer: van Uitert B.V., Year: 1996, Machine number: D05-11399-01, Serial number: 1996.07.005, Installed power: 10 kW - 400 V - 50 Hz, Consumption of air: 3 Nm3/h, Weight: 2.500 kg, Capacity: up to 500 cans/min = 30.000 cans/h, Control panel with Danfoss VLT frequenc ...

Stephan UM/SK 60 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Mounted on a stainless steel frame. The bowl is equiped with a double jacket for heating/cooling on the jacket, 2x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, cutting blade, maximum working pressure in the bowl -1/- bar (protected with overpressure valve), maximum temperature in the bowl 95 °C, maximum temperature in the jacket 95 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid with a hopper with a pneumatic valve for adding powders, mounted on the lid a scraper agitator for the wall, electric driven (0,37 kW - n2: 39 rpm), 1 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl  ...

This cheese dividing machine disposes of a manually rotated turntable. This offers the possibility to cut cheese loaves and rings in segmental portions (wedges) as well as cheese loaves and bars in sticks with freely selectable stick width. Diameter of the rotated turntable: 100 cm. Cutting knife length: 105 cm. The machine is previously used for Gouda cheese loaves, Butterkäse and Tilsiter cheese (1-2 kg loaves). Light screen protection (Sick). Control panel with PLC control. Spare knife available., Type of Machine: Cheese dividing machine, Capacity: up to 40 cuts/min, Max size of the cheese: 100 x 100 x 25 cm, Total dimensions: 260 x 155 x 230 cm

Simon Freres Butter bulk packing without kneading effect or damages to the structure. Automatic filling of butter into carton and cases between 5 to 25 kg. Currently this machine is set for carton boxes of 10 kg butter blocks. Dimensions of the forming head: 120 mm x 90 mm. Extrusion length of the block is adjustable on time. Feeding by a big volume feeding hopper with 2 large diameter augers / screws, all made out of stainless steel. Infeed conveyor and manually position the folded carton box in front of the extruder. Manual close the box and move it forward on the non driven outfeed conveyor. Motor: ± 3 kW - 380 V - 50 Hz. New simple control panel with universal timer for adding the dosing time, emergency stop and main switch. Manual available in French language., Type of Machine: Butter Packing Machine, Capacity: up to 1.500 kg of butter per hour (output), Motor: 3 kW - 380 V - 50 Hz ...