filler and capper used for sale

HANDTMANN VF 620 Filling, Portioning. Year 2002

Universal tool milling machine DECKEL FP 3 With 3 axes active digital display Heidenhain TNC 11 Year of Make: 1984 Travel: X 500 Y 300 Z 400 Speed range: 25 – 2500 rpm With the following accessories: Rigid angle table 850 mm x 400 mm clamping surface Swivel rotary table 0 450 mm with dividing discs Bumper Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer Various milling mandrels SK 40 / S22 x 2 Chip tray Automatic lubrication pump for X,Y,Z axis Machine Light Coolant Setup 4 pcs machine shoes Operating instructions

A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible.

Injection moulding machine for food and beverages caps

Injection moulding machine for food and beverages caps

Maximum Diameter: 630 mm

Anilox - cylinders and plates washer

Capacity 50 tons Stroke 750 mm Table size 1500x1000 mm

Offer 25366 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

turning diameter over bed: 360 mm turning diameter over slide rest: 180 mm turning length: 900 mm turning speed range: 25 - 1600 U/min total power requirement: ca. 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 1 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 POLYTEX pinking machine type ZH (Zigzag cutting) knife width 500 mm, serrated knife with 5 mm serration gauge, stroke 50 mm,

1 POLYTEX "Waterfall Sample" Mounting Machine type FC, year 2017, semi-automatic "Waterfall" sample mounting machine of modern design for "Waterfall" sample strips. Electronic power traction feed with programmable logic controller (PLC).

1 TUPESA rotary garment dyeing and washing machine type STONE 550, capacity up to 550 Kg (constructor indication and depending on articles) drum diameter 1950 mm x depth 1700 mm (volume 5000 L)

1 POLYTEX "Waterfall Sample" Mounting Machine type FB, year 2017, semi-automatic "Waterfall" sample mounting machine of modern design for "Waterfall" sample strips. Electronic power traction feed with programmable logic controller (PLC) and touch screen. sample size width infinitely variable up to 800 mm, unlimited length, output single ply up to 900 stripes per hour, output two-ply up to 450 stripes per hour,

1 YAMADA Single End Sizing Winding machine Mod. YS-6 12 spindles year of construction 1998 with YAMADA TFB meter counter on each spindle squeeze roller sizing application type non-touch yarn break control sensor on each spindle take-up cylindrical traverse 150 mm (6 inch)

1 HOZA pinking machine type ZM 50 (Zigzag cutting), cutting width 500 mm, serrated knife with 4 mm serration gauge, manual actuation

1 BREITENBACH type Benjamin 3, 5-D high-performance continuous dyeing and finishing machine for elastic and rigid narrow fabrics (and bands, ribbons or tapes) made of polyamide, cotton or viscose year 1999 composed of: foulard dyeing padder roller width 300 mm with electrically heated vat, steamer capacity 34 m, 5 washing boxes each with squeezing padder and indirect steam heating, chemical finishing padder, hot air dryer capacity 50 m gas heated, exit for 4 tapes

1 SUCHY laminating machine type Laminator, year 2015 (machine has less than 1000 working hours), roller width 220 cm, working width 200 cm, consisting of: - Unwinder for fleece, - Unwinder for scrim (fabric web), - Unwinder for oil paper, - All 3 unwinders use 3" (76 mm) cardboard cores with pneumatic expanding shafts, - Heated roller with water heating (90 °C) and REGLOPLAS temperature control unit, - Cooling roller, - Pressure roller, - 3 longitudinal cutting devices with quadruple knives (200 mm diameter), - Cross-cutting unit with circular quadruple knife (110 mm diameter), - Rewinder for 3" (76 mm) cardboard cores, up to 1000 mm diameter, Speed: 0–10 m/min

Key data: 150 KW, 220 kVA, 400 V

Sokratherm Gas-CHP GG 140S oE Gas electricity and heat generator from 2010, with approx. 60,000 operating hours, with control and silencer. 1 available 140 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: MarelliGenerators MJB 250 LA4, 220 KVA Manufacturer: Sokratherm Model: GG 140S oE Type: Gas CHP Serial Number: F103064 Engine: MAN E2876 E312 Electrical power [KWel]: 140 Thermal power [KWth]: 216 Gas capacity [KWgas]: 392 Year of Make: 2010 Operating hours: approx. 60,000 Weight unit [kg]: 2,850 Dimensions LxWxH [m]: 3.00 x 0.9 x 2.4 AC Generator Marelli MJB 250 LA4 Manufacturer: MarelliGenerators Model: MJB 250 LA4 Type: AC Synchronous Generator Serial Number: MJB2572GT68MO Power [KVA]: 220 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 317 Speed [1/min]: 1,500 Year of Make: 2010

1 SUCHY fabric winding and cutting machine, year of manufacture 2015, roller surface width 220 cm, Unwinder with pneumatic expanding shaft for cardboard cores, Inspection station, Cross-cut knife holder (for manual cross-cutting), Rewinder with pneumatic expanding shaft for cardboard cores, Speed: 0–50 m/min

1 JAKOB MÜLLER direct warper type MW 650, working width up to 650 mm, maximum flange diameter 600 mm, MÜDATA control, warper supplied without creel

1 POLYTEX pinking machine type ZP-V (Zigzag cutting), knife width 1020 mm, machine equipped with FASNACHT security light guards, stroke up to 65 mm height, up to 50 cuts per minute, PLC and inverter controlled. Fully automatic electric double feed system with 2 programs for simultaneous prechoice of sample length and width. Ensures highest degree of accuracy and operating comfort. Machine delivered with all possible extras/options namely: cutting height adjustment 0-1-2 mm (with or without carton underlay), increased hold-down force with hydraulic speed regulators, reinforced laser pointer.

1 TUPESA sample rotary garment dyeing and washing machine type TSP-2-CP, high temperature high pressure machine, year 2001, capacity 2 Kg, drum diameter 470 mm, drum depth 250 mm, drum volume 42 L, dye cycle controller TUPESA type RS-1, drum rotation 0-28 rpm, machine equipped with centrifugation process of 450 rpm, 2 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc.

1 TUPESA rotary garment dyeing and washing machine type TSP-25-CP, high temperature high pressure machine, year 2008, capacity 25 Kg, drum diameter 1100 mm, drum depth 610 mm, drum volume 580 L, dye cycle controller TUPESA type RS-BASIC PLUS touch screen, drum rotation 0-28 rpm, machine equipped with centrifugation process of 700 rpm, 5 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc.

1 TUPESA rotary garment dyeing and washing machine type TSP-55-CP, high temperature high pressure machine, year 2004, capacity 55 Kg, drum diameter 1250 mm, drum depth 1100 mm, drum volume 900 L, dye cycle controller TUPESA type RS-1, drum rotation 0-28 rpm, machine equipped with centrifugation process of 650 rpm, 5 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc.

1 EFI REGGIANI MEZZERA continuous bleaching and scouring instalation, year 2020, commissioned 2021 (only 4800 working hours), roller width 2000 mm, working width 1800 mm, minimal working width 900 mm, for cotton fabrics 80 to 250 GSM g/m2

1 BRÜCKNER open width belt relax dryer type OR-SR-24/5-0, year 2006, working width 240 cm, 5 gas heated fields

1 KAPPA pinking machine type 51N (Zigzag cutting), knife width 500 mm, power driven swatch and sample cutting machine, serrated knife with 4 mm serration gauge, year 2022, precise and accurate thanks to mechanical movement of the cutting board (turn wheel), exchange of knife is effortless and fast, motor 1,5 kW (2 HP)

1 HOZA (Germany) pinking machine type EZM 60 (Zigzag cutting), knife width 600 mm, electrically actuated, year 2019, laser for cutting line indication, machine controlled per PLC, knife with 4 mm serration gauge, up to 30 cuts per minute, 3 x 380 V, 50 Hz,

1 KAPPA pinking machine type 41L, cutting width 410 mm, machine supplied with 3 cutting knives: 1 serrated knife with 4 mm gauge serration installed, 1 serrated knife with 4 mm gauge serration spare, 1 flat straight knife, table size 900 mm x 435 mm, manual actuation

turning diameter over bed: 800 mm turning diameter over slide rest: 540 mm turning length: 4000 mm centre height: 400 mm centre distance: 4000 mm spindle turning speed range: 9 - 1140 U/min weight of the machine ca.: 8,0 t - with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 620 mm gear width: 90 mm max. module: 12 min. module: - no. of teeth: 6 - 100 pivoting angle: 0 - 90 Grad spindle taper: metr. 100 milling head speed: 28 - 56 U/min connected load: 18 kVA Control: total power requirement: 14 kW weight of the machine ca.: 12 t 2020 Retrofit with new control/electrical system) - CNC control NTC (Fanuc) (German/English) - electric handwheel - new motors/ electrics - various change wheels - chip conveyor - coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weiler Commodor – lead and pull spindle lathe (partially overhauled, built approx. 1990) Condition: Partially overhauled, very good general condition Year of construction: approx. 1990 Manufacturer: Weiler Model No.: Commodor Machine Type: Lead and Pull Spindle Lathe Technical data (approx. information): Max. turning diameter over bed: 380 mm Max. turning diameter over support: 190 mm Max. turning length: 1000 mm Bar Passage: 56 mm Speed range: 25 – 2000 rpm Spindle Nose: A2-6 Drive power: 4.0 kW Tailstock: MK4 Automatic longitudinal and flat feeds: 0.011 – 0.80 mm/rev Thread ranges: Metric: 0.3 – 10 mm Inch: 80 – 2 3/4 G/" Diametrically Pitch: 80 – 5.5 Dp Module: 0.2 – 5 Dimensions (L x W x H): 2200 × 1200 × 1800 mm Weight: approx. 1500 kg ⚙️ Equipment & Accessories: 3-Axis Digital Display SINO (New)  ...

turning diameter over bed: 370 mm turning diameter over slide rest: 200 mm turning length: 1000 mm centre height: 185 mm spindle bore: 56 mm tailstock quill taper MT: 4 turning speeds: 50 - 2000 U/min power capacity: 4,0 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,3 x 1,1 x 1,3 m Center lathe 200mm three-jaw chuck Size B Multifix tool post 3 Multifix tool holders Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Labeling system PRINTWOLF from 2013 for glasses and small bottles (approx. 60ml - 250ml),, very good condition, 2 Collamat label dispensers for self-adhesive labels, Labeling of the front label (on the glass) also possible in two parts, labeling of the lid, PLC control (Siemens),, high-quality sensors, also detect black and transparent labels, Vacuum rewind belt with 2 different feed screws., Angular glasses (hexagon/octagon) can also be labeled, Labeling speed: 18 meters / min (about 80 glasses), Labeling accuracy: +/- 1mm, Supply: 400 V 50 Hz power approx. 1.5 KVA, Aluminum - stainless steel frame., The belt length of the machine is 3.97m., Separate control cabinet, Matching, additional packaging table with conveyor belt, The work table has dimensions of 1.20 x 2.32 x 0.94 m W/L/H (table top), The total length with tape overhangs is 3.20m, power: Labeling speed: 18 meters / min (about  ...

A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible. Expected to be available from the end of January.

Machine for filling, inserting dropper inserts and sealing vials and bottles with screw caps (stable, stackable) • Maximum output 80 objects/min • 6 filling stations with 6 rotary vane pumps for filling range 20-100 ml, other filling ranges possible by purchasing new pumps • 1 new replacement pump for filling range 20-100 ml • Anti-drip protection through suction back • Bottle feed through infeed turntable • Bottle discharge through discharge turntable • Press-in station for dropper insert diam. 12.2 x 19 mm with sorting pot • Screw-on station with pre-screwing and post-screwing for screw cap diam. 20.5 x 32 mm with sorting pot • Vacuum pump • Available bottle formats (all information without guarantee, no guarantee of completeness): - diam. 24.2 x 63.3 mm (10 ml) - diam. 29 x 74.2 mm (20 ml) - diam. 32.2 x 83.8 mm (30 ml) - diam. 35.4 x 71.7 mm - diam. 37 x 91 m ...

Central oil and grease lubrication system, MFE5-BW30 + KFG1-5W2 Vogel, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Central oil and grease lubrication system consists of: 1) Central lubrication (oil) MFE5-BW30-S7+299, Vogel 30L, 0.5L/min., max. 27bar 2) 2 piston pump units (grease lubrication) KFG1-5W2-M+924, 24V DC, Used! The part was purchased from a certified company's spare parts warehouse, is in good condition and fully functional. We have tested the system's pumps: Oil pump test: it delivers immediately. Test of the 2 grease lubrication piston pumps: The agitator starts immediately and grease delivery begins. If you are interested, we would be happy to show you the test on video. The system can be viewed, tested and collected from us at any time. The level sensor on the oil tank may be faulty, which has been tak ...

Central oil and grease lubrication system, MFE5-BW30 + KFG1-5W2 Vogel, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Central oil and grease lubrication system consists of: 1) Central lubrication (oil) MFE5-BW30-SZ, Vogel 30L, 0.5L/min., max. 20bar 2) 2 piston pump units (grease lubrication) KFG1-5W2-M+924, 24V DC, Used! The part was purchased from a certified company's spare parts warehouse, is in good condition and fully functional. We have tested the system's pumps: Oil pump test: it delivers immediately. Test of the 2 grease lubrication piston pumps: The agitator starts immediately and grease delivery begins. If you are interested, we would be happy to show you the test on video. The system can be viewed, tested and collected from us at any time. The level sensor on the oil tank may be faulty, which has been taken i ...

Features: automatic edge guidance for high quality roll presentation, measuring function, large inspection area, cut length function, foot operated on off switch, speed control, reverse capability, emergency stop, locking wheels allow easy movement. Cradle: with 6 rollers, max. roll width: 1800mm, inspection surface: 600mm, max. re-roll diameter: 400mm, operating speed: 0-45m/min, motor: 1x230V/50Hz, 1x120V/60Hz, length: 2450mm, width: 1500mm, height: 1110mm, weight: 302kg. Condition: counter not connected, was removed, switch for the backlight is missing, on off switch is missing, foot pedal for start/ stop is missing, cutting knife is missing. Operating hours unknown. An on-site inspection is possible.

x-travel: 1.200 mm y-travel: 600 mm z-travel: 675 mm Control: Heidenh.iTNC 620 HSCI FS table-size: 1.220 x 620 mm : 40 fach Distance between table and spindle: 735 mm turning speeds: 10.000 U/min spindle drive: 18 kW Internal cooling system: 30 bar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -Electronic steering wheel. -LINEAR RULES. -Laser probe measuring tools. -Preparation for piece measuring probes. PROBE NOT INCLUDED. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 - 900 mm turning diameter over slide rest: ? mm turning length: 1000 - 1500 mm total power requirement: ? kW weight of the machine ca.: t dimensions of the machine ca.: m Free at short notice due to current company resolution In use until the end Untested, wear and tear due to age and use Machine package 5 x lathe 2 x CAZENEUVE HB 500 1 x WEISSER Junior 1 x SCHAERER UD 630 x 1500 1 x ERNAULT SOMUA HN 500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutter Manufacturer: Kramer Grebe Wetter Bowl made out of stainless steel Dimensions: 290x244x210cm Control voltage: 230V Operating voltage: 400V / 50Hz Power: 74kW

Digital Center height 150 mm Circulation over bed 300 mm Center width 1000 mm 3-jaw chuck, Arbor Chip protection Chip tray

Dimensions (L/W/H): 3500x2300x1780 mm Weight: 4000 kg Total power requirement: 27,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1800x740x1000 mm Weight: 420 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3150x4000x1900 mm Weight: 1500 kg Total power requirement: 36 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3500x1600x2000 mm Weight: 1720 kg Total power requirement: 26,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3000x3000x1650 mm Weight: 850 kg Total power requirement: 16 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.