filler and capper used for sale

total power requirement:10,5 kW weight of the machine ca.:4800 kg dimensions of the machine ca.:3000 x 2100 x 2000 mm centre distance:1200 mm Height of centres:200 mm grinding-table stroke max.:X -Achse 1000 mm table-size:2060 x350 mm z-axis:Querhub 250 mm Feed speed:0,005 - 5 m/min. grinding head - swivable:360 ° taper ISO:50 control:Sinumerik System 8 Documents:vorhanden

total power requirement:16,5 kW weight of the machine ca.:3,8 t

1 set ( 4 pieces ) clamping jaws for Vertical Borer T-slot distance 180 mm Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

Wheat beer fermentation tank, Fabr. Schulz, with 55.02 hl content, standing on calotte feet, in stainless steel, coolable over 2 cooling zones in the frame, with manhole in the lower half and hefeluke with visible glass in the upper half, with spray head, pulled down cleaning line, floor display via hose and measuring rod, with sampler, ladder bracket, with spout, built in 1996

In various shapes and sizes in position.

FAG - Batch of bearings and cast iron bearing housings 441KG

NTN, SKF, NSK, Torrington - Batch of industrial bearings and bearing blocks

MTK+, ISB, HIWIN - Batch of industrial bearings and linear components

- 1x 5.055 lt. storage tank, Fabr. Kaspar Schulz, 0.0 bar, flat-bottom tank, standing, in VA, with pulled down Cleaning line, sight glass above, manhole in the lower frame, ladder bracket, YOC 1994. - 2x 6,326 lt. storage tanks, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentanks, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, sampler, YOC 1989, - 1x 8,022 lt. storage tank, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentank, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, YOC 1989.

Stainless steel container, transport container 250 liters Content: 250 Ltr. Working pressure: 0.9 bar, according to type plate, without papers, test pressure 2.0 bar Material: Stainless steel, 1.4301 Design: round, standing, on 4 feet, with welded construction for use by forklift or pallet truck, Outlet with disc valve DN 50, in the upper lid DN 125, 1 x safety valve, 2 x quick coupling connection for CO², Total weight 57 kg last use: Food Height: approx. 1,515 mm Diameter: approx. 625 mm

SKF / SNR - Batch of bearings and Jones cast iron bearing housings 226KG

Bread cutter Model: Varia Pro 1000 easy operation 200 discs/min Cutting width/bread length 490mm Circular knife machine manual operation Disc thickness adjustable from 4 - 30 mm Dimensions: 990 x 746 x 1080 mm, WxDxH Bread dimensions max: 490 x 340 x 160 mm L x D x H DGUV V3 called Connection 230V,1 kW New machine with 24 months warranty Option: - Stainless steel version - Automatic claw - Bag holder - Special colours - front bread tray Visit our large bakery machinery exhibition!

Manufacturer: Metall Meister Type / Model: not known / not specified Mobile tool trolley / assembly table with cast aluminium chipboard (T-slot) Mobile tool trolley / work table Steel frame construction with castors, cast aluminium plate as work surface Design of the work surface: Cast aluminium plate with T-slots Suitable for clamping, assembly and straightening work Condition: Used Work surface: approx. 1200 × 800 mm

Precision Column drilling machine with additional attachments, for precision metal and wood processing and model making. From the same manufacturer as proxxon. New but without packaging

REF-2034 RISCO CONTINUOUS VACUUM SAUSAGE STUFFER Continuous vacuum sausage filling machine Manufacturer: RISCO Model: RS-4003-320SC Year: 1998 Power: 4.5kW Voltage: 400V. 50Hz. Three-phase Weight: 560kg Overall dimensions: 1,000mm width, 800mm length, 1,970mm height

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

Including: 1x Heuer vice clamping width 150mm, 1x T-slot clamping block, 3x V-block 1x H 450mm 2x H 70mm

Rexnord / Rollway - Batch of industrial bearings and housings 111KG

SKF / FAG - Batch of bearings and bearing parts 296KG

Unused new in packaging

Lot solid carbide drills and thread mills Manufacturers: SIEVERT, HOLEX, Sandvik, WALTER and others Drills: from 3 to 11 mm Thread mills: from M3 to M12 approx. 10.0 kg

I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate.

Consisting of: metal profiles, rods, bags of concrete mortar, fasteners, brackets, wooden planks, panels, boxes of tools, parts, crates with cables, small material, lamps, fixtures, various other building materials.

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools

65x 62201-2RS1/HT22VT193 SKF 13x 526385 FAG 4x 6008.2RSD. C4. L69 FAG 8x 6008LLU/2AU1 NTN 41x 411SQ127 NKE and more

Continuous vacuum filler for straight filling, portioning, and twisting All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 90 Length: 70 Height: 160 Delivery time: 20 working days after advanced payment

Type: S200 Vacuum Filling Machine Continuous vacuum filler for straight filling and portioning All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.6 KW Machine dimensions in cm: Width: 205 Length: 130 Height: 210 Delivery time: 20 working days after advanced payment

IPD Kit: shirt; piston; rings and rings Part number: 9Y-7212

SKF / FAG - Batch of industrial bearings, bearing housings and components 257KG

" Item: Height measuring and scribing device / precision measuring stand Manufacturer: unknown Type / model: unknown Condition: used, good mechanical condition • Solid cast iron base with round support/reference plate (Ø approx. 57 mm) • Vertical column with adjustable measuring arm • Fine adjustment via lateral levers / clamps • Front mount for dial gauge, probe or scribing tip "

FAG / SKF / Dodge - Batch of various bearings and bearing housings 86KG

Automatic tube filling and sealing machine for PE and laminate tubes including: - Format set D.19 and D.35 - Tube magazine for empty tubes - automatic tube orientation - Hot air sealing unit Leister - Coding device on the tube fold on one side - water-cooled sealing jaws - cooling of the weld seam with cold air gun - Siemens PLC - 50L product hopper

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools

Precision Column drilling machine with additional attachments, for precision metal and wood processing and model making. From the same manufacturer as proxxon. New but without packaging

FAG, SKF, RHP - Batch of various bearings and bearing parts

TO WHOMIT MAY CONCERN ; WE VE NEW UNUSED COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 AT OUR STOCK ADDATIONALY WE VE RECON COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 COMPRESSOR SIDE AND TURBINE SIDE ARE NEW .. THIS ROTORS ARE FIT FOR BELOW EXHAUST TURBO CHARGER TYPE TYPE ABB VTR 304 P 11 HT 439312 n max 467 n bmax 443 t max 680 t bmax 650 HZTL 428765 P3 EX STOCK. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Speed: from 35 to 3000 rpm Spindle passage: approx. 45 mm Center length: approx. 600 mm Center height above bed: approx. 180 mm Turning diameter over bed: approx. 360 mm Center height above support: 130 mm Turning diameter over support: approx. 260 mm The machine is equipped with a tailstock, a lathe steel holder and a three-jaw chuck from the manufacturer RÖHM, diameter: 160 mm and a two-axis digital display from the manufacturer FAGOR

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site.

Type: Vemag LPG 202 The LPG 202 length portioning machine links sausages with identical lengths and weights It can process cooked and raw sausage in natural, collagen and cellulose casings The LPG 202 length portioning machine is compatible with the following filling machines: AVG 201 ROBBY / ROBBY 2 ROBOT HP-series ROBOT DP-series Sausages are produced in the calibration range from 14 to 40+ mm Link all types of casing Extremely accurate lengths and weights Gentle treatment of casings Linking speed can be adapted to the type of casing Hygienic operation Casing magazine for artificial casings (optional) Device to detect ends of natural casings (optional) Delivery time: Machine is ready for delivery

26x 33281/Q SKF 40x FRB12/160 SKF 44x PCM15015580F SKF 100x UL36-000426 SKF 67x FR130/10 FAG 30x HJ2318 FAG 3x 3215B. TVH. C3 INA 71x F-110488 INA 57x F-45398 INA 220x F-45914 INA and more

Schickart TS 38 Bread Slicer - Bread slicer with round knife - Table machine - with cutting width adjustment - 400 volts