138,015 used machines on RESALE, but how to find them? Machine Search
turning diameter over bed: 490 mm turning diameter over slide rest: 280 mm turning length: 2000 mm centre height: 245 mm centre distance: 2000 mm spindle bore: 62 mm total power requirement: 7,5 kW weight of the machine ca.: 3,5 t dimensions of machine L x W x H: 3,78 x 1,17 x 1,42 m Accessories: 3-jaw chuck 240 mmø, face plate 400 mmø, MULTIFIX-tool post, solid steady, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Maurer baking-, roasting- and cooking chamber for 1 trolley, type: ARQ 2811, year of construction: 1999, dimensions: 1800 mm x 1700 mm x 3150 mm.
Maurer baking-, roasting- and cooking chamber for 1 trolley, type: ARQ 2811, year of construction: 1999, 400 V, 50 hz, 77.9 kW, dimensions: 2000 mm x 1700 mm x 3050 mm.
Chemical dosing and water treatment installation, consisting of 2 vertical GRP/plastic dosing and storage tanks, equipped with integrated control boxes, dosing pumps and piping.
Savime and Zalkin cap feeders, serial number Savime: 15114 11721, 15114 11722, 15114 11720, year of construction: 2015, type Zalkin: DISTRIBUTEUR U1200, serial number: 63290, year of construction: 2015, weight: 288 kg.
Serac bottle rinsing, filling and capping machine, type: IN36R36V12/1620, serial number: M15-0M8L, year of construction: 2015, 400 V, 3 Ph, 50 Hz, 91 A, 63 kVA, dimensions: 7000 mm x 3500 mm x 2800 mm.
Rösen & Robbert Bread Slicer Type: Spa Bayern analog control Cutting width adjustable from: 3 – 15mm for cutting round and elongated breads with lubrication system can be driven on castors External dimensions width 104cm depth: 75cm height:107cm
Very well maintained 80 liter machine, with 2 x knife shaft speed + 2 x bowl speed
Serac bottle rinsing, filling and capping machine, type: AN 3R30, serial number: 16, year of construction: 1987, dimensions: 6300 mm x 2450 mm x 3900 mm.
Serac bottle rinsing, filling and capping machine, type: AN3R30, serial number: 042, year of construction: 1991, dimensions: 6300 mm x 2450 mm x 3900 mm.
High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation
SPECIFICATIONS: Machining max mm: 330 Ø mm: 40 Computer-aided measuring and displaying system for Measurement of tools, digital display of tool data Input of profile dimensions, calculation of spindle setting data Transfer to the machine by means of a label
Cooking kettle Fessmann Nova 400, 400 liters, gas heated, MC control, stainless steel version,
Serac bottle rinsing, filling and capping machine, type: TN36R36V12/1620, serial number: M13-0M4K, 400 V, 3 Ph, 50 Hz, dimensions: 7000 mm x 5500 mm x 3700 mm.
Industrial cutter Seydelmann K 206 Ultra, 200 litre bowl made of stainless steel, largely solid stainless steel, operation via cross lever switch, separate digital display, main cover and product ejector hydraulic, transparent noise protection cover made of special plastic, separate stainless control cabinet with built-in main switch, central lubrication point for knife shaft, balanced, exchangeable knife head, 2 knife speeds, 2 mixing gears forward, 2 separately switchable Bowl speeds, DGA control, temperature sensor, 6-knife head, 400 volts, 50 Hz, 200 amps
Seydelmann Kutter K 40 Ultra, Seydelmann K 40 U, 40 liter bowl made of stainless steel, largely solid stainless steel, operation via toggle lever switch, separate digital display, noise protection cover made of transparent special plastic, central lubrication point for knife shaft, balanced, replaceable knife head with new knives of your choice, 2 knife speeds, 2 bowl speeds, 2 mixing gears forward, DGA control, 6-knife head, 3-knife head optional for an extra charge available, operating voltage 400 V / 50 Hz
Seydelmann K 60 DC-6, 60 litre cutter with ejector, largely solid rust-free, operation via toggle lever switch, separate digital display in stainless protective housing, separate stainless control cabinet, noise protection cover made of transparent special plastic, central lubrication point for knife shaft, balanced, exchangeable knife head, 6 infinitely programmable knife speeds up to 5,000 rpm, 2 bowl speeds, 6-knife head
Cutter Kilia 200 liter Express, surface, bowl lid and bowl stainless steel, noise protection lid, loading, ejector, knife shaft brake, knife shaft speed 2-touring
Cutter Kilia 5000 Express 500 liters vacuum cooking fast cutter, knife shaft with 6 fixed programmed speeds, 4 forward and 2 backward, infinitely variable bowl drive, electronic thermometer, electronic tour counter, hydraulic noise protection cover, hydraulic knife cover, hydraulic ejector, knife head 8-piece, separate control cabinet made of stainless steel
7-axis turning and milling center Manufacturer: OKUMA Type: MacTurn 50 Year of Make: 2001 Control: OSP-U100L Spiral Circle Interpolation HS ATC Upper Turret: X1 = 598 mm Z1 = 1,660 mm Y = 230 mm, +110 mm, -120 mm. C = 360/0.001 B = 360/1 indexed Turning diameter max.: 610 mm Turning length Z1 min.: 1,500 mm Swing diameter: 610 mm Turning diameter over face slide: 580 mm Center width approx.: 2,000 mm Recordings: BT50 Driven WZ BT50 = 40- 3000 rpm Magazine ATC 72 BT50 To turn: ≈ 36 Powered WZ: ≈ 36 Lower turret V8: X2 = 200 mm Z2 = 1,045 mm Turning diameter max.: 380 mm Turning length Z2 = 1,045 mm Swing diameter = 380 mm Mounts: VDI40 Turret: 8 places VDI40 Spindle: Speed range: 14 - 2800rpm at 37kW Lining: D400mm Spindle Passage: 110mm Spindle Nose: A2-11 Torque approx.: 2,000 Nm Coolant system with IK 40bar New screen New ...
Cutter Laska model KU 65 AC, bowl capacity 65 liters, microprocessor control, probe plate with membrane keypad and plain text display, infinitely adjustable knife shaft 35-4,900 rpm, two bowl speeds, mixing gear backwards infinitely variable, electric knife shaft brake, 6-knife head, 3-knife head optionally available for an extra charge, engine power 23 kW, operating voltage 3 x 400 VAC / 50 Hz
Max. workpiece height 100mm Max. workpiece width 1000mm Min. workpiece width 500mm Top unit 6 brushes Top/bottom adjustable unit Helicopter rotating system 2 types of brush rotation speeds Smooth adjustment of belt feed speed Belt feed 1.5kW 4kW motor Diameter of the exhaust port 180mm, 200mm
Hardware drilling and recessing machine, with multi-spindle head Table mounted Motor 1,1 kW Fence left and right, 1,5 m. long
Capacity: 2 x 2.70 m. 3 x vertical pushers 2 x horizontal pushers Pneumatic Mobile
Cutter K+G Wetter CutMix 200 STL with load for 200 liter standard car and ejector, 200 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely adjustable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, K+G weather CM 200 STL
Capacity: 3000 x 1900 m. 4 x horizontal presses 2 x vertical pressure beams Hydraulic pump with 3 kW motor
Max working width: 1300mm Max working thickness: 140mm Max. machining width: 1300mm Motorized feed rollers 2 brushing units
Cutter K+G Wetter CutMix 120 STL with load for 120 liter standard car and ejector, 120 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection lid, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely variable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, rated power 42.5 kW, K+G weather CM 120 STL
Motor: 5.5 kW Speed: 2980 rpm Input diameter: 25 cm Output dimensions: 30 x 20 cm With mounting bracket With control box
1250 x 2500mm TLF 2000w Laser STOPA Sheet storage, SheetMaster, ToolMaster, SortMaster Year: 2005
I sell a Top Dubel drill multi-spindle drill Detel M-13, built in 2007. 3-spindle See good condition. Available the same.
Auction-ID: A1-50256-1345
Auction-ID: A1-50256-1440
Make : Hassia Model : THL 24/28 Stations : Plastic Roll insert— Pre Heat —Forming to Cups —Filling — Sealing — Cutting in Pieces — Robot pick and place — Wrap Around Carton Packer Volume : 10gr -20gr Product : Margarine/Butter Capacity : 37,000 pieces per hour Circles per Min.: 25 Y.O.M : 1986 S.N : 1021800287 Electric : 220 ~ 3 / 50hz / A: 65 Weight : 5000kg Dimensions : 5500 x 800 x 1700 Air : 6 Bar
Stainless steel container standing 6,000 liters, insulation - 1 x yes, 1 x no; Approximate dimensions: diameter: 1,850 mm, total height incl. feet: 3,300 mm, height feet: 700 mm, height container 2,300 mm without cone Use so far: lye or acid
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 620 mm table width: 170 mm table load: t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-50256-1341
Multi-stand drill Prior sale reserved - errors possible Internal Reference Number: D-1143-1
maximum number of results exceeded
please refine your search
3.500 € 
