filler 5 l used for sale

Thickened SAC RS/530 -used-link pressure beam, electric height adjustment, under-table roller, separate feed motor---------- Technical data ----------planing width: 530 mm, number of blades: 4 pieces, passage height: 240 mm, feed speed: 7 / 14 m/min., suction nozzle: 140 mm, motor: 4 kW, weight: 840 kg

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 50390 € : 952.37 € : 500 mm : 1500 mm : 250 mm : 75 mm : 300 mm : 400 mm : 8 : 80 MK : 3 : 25-100, 100-400, 500-2000 U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60-1/4 Gänge/ : 0.125 - 30 : 240-1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3100 mm : 1250 mm : 1400 mm : 2800 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS:  ...

Wickert high-precision hydraulic press WKP 5000 S with sliding table. Total pressing force 5000 kN. Table size 1800 x 1200 mm, installation height min 800 mm, installation height max. 2300 mm. Opening stroke 1500 mm. Sliding table extendable 1500 mm. Year of construction 2011 very good condition. available from week 22/2026.

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 500 with grooved table ---------------------------------- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----------------------------------------------- Motor with ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 53900 € : 1018.71 € : Doppelsäulenführung : 7000x41x1,3 mm : 15 - 120 m/min : 560 mm : 540 mm : 810 x 530 mm : rund 520 mm, quadrat 520 : rund 520 mm, quadrat 520 : rund 330 mm, quadrat 330 : 875 mm : 1.1 kW : 4 kW : 0.12 kW : 3850 mm : 1700 mm : 2450 mm : 3400 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller  ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!

Overview  This wrap-around carton packer was manufactured in 2008 by the German company MEYPACK. The machine is in very good condition and was used only occasionally, as the primary packaging method at the facility was plastic crates. It is already dismantled and stored in a warehouse and is available immediately. Technical data  Capacity: 60 packs/minute with 2x5 (10 bottles) 40 packs/minute with 4x5 (20 bottles) Packing type: Wrap-around carton box Carton dimensions: Length: 120 – 300 mm Width: 210 – 400 mm Height: 100 – 350 mm Formation of packs: 2x5 and 4x5 Scope of Delivery  Meypack VP 531WA wrap-around packer

Key data: 800 KW, 400 V

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Micro Brewery 2-Vessel 5hl Braukon 750hl / annum The brewery is a modular 5 hl two-vessel Braukon brewhouse system with a separate whirlpool, designed for production of both top- and bottom-fermented beers. Brewing is controlled with manual valves, but brew vessels and temperature controls are made with Braukon brew control PLC. Upto 18° Plato high gravity beer production is also possible with this brew line. Brew vessels are bottom heated with hot water generated with plate heat exchanger from low pressure steam and wort is heated with external boiling system. The 2-vessel system is constructed entirely in stainless steel (AISI 304) and delivered as a fully integrated, pre-piped and pre-wired unit, enabling rapid relocation works. Nominal capacity is 3–4 brews per day, depending on recipe and process parameters which is approx. 750 hl/annum. Brew control is semi-automatic and made ...

Highest sheet capacity at 400 N/mm2 x 1000x2 16 A plug Length 1.30 m Width 0.4 m Height 1.30 m Weight 250 kg Tools

CRAMMED FEEDING UNIT, reconditioned, This unit can be synchronized to feeding screw from buffer silo and horizontal screw in extruder to grant a uniform, continuous feeding, for light scraps, mounted on a 130 mm extrusion line, totally reconditioned, possible addition of mastebatch feeder, availability: in stock, conditions: reconditioned, type: for up to 700 kg/h extruders

Used Van Dam 520-6, UV-COM, 6-Color Cup Printing Line, Age 1999:, Auto Elevator Tray Feeder, Auto-cross feeder conveyor, Standard Van Dam Goose Neck infeed to main print unit, Universal Screw Denester, Mandrel Spin System, SOFTAL Corona Pretreater with Leak tester, Main 6-Color Print unit. Modern New Style Print Heads, Each Print head consisting of : 8 x precision ground rollers, 2 x Oscillating Rollers water cooled, Gear driven Fountain Rollers, Ink Well with Ink Agitators, All six heads swing open for easy plate mounting and free roller accessibility, All pressure and color register adjustment can be made while printer is running, Easy access to product handling areas and print area, No cup no print system, Double cup detection, Main Inverter Drive. Speed continuously variable., UV-On Mandrel Curing System: UVITERNO MONO-JUMBO-8015., Dual Timing Belt Take-Off, Exact Count, dual chromed ...

DECOILER   design: twin reel   coil weight max.: 0.5 to   max. diameter of coil: 1600 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1500 mm   space requirements -front/back-: 2100 mm   total height: 2200 mm   total weight approx.: 1570 kg - Double reel - Load capacity 1600 kg - Spreading range 270 - 550 mm - max. sheet width 150 mm - 3 pressure arms - Speed approx. 20 m/min

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Trumpf TruBend Cell 5000Year of manuf. : 2018 Control : ____________Description:Technical dataYear of manufacture:2018Pressing force approx.:3200 kNFolding length approx.:4420 mmControl system:TASC 6000Projection:420 mmFree upright clearance approx.:3680 mmUsable installation height approx.:615 mmMachine weight approx.:23400 kgEquipment:- Sturdy machine frame:- Press beam, stress relieved with high bending strength:- Spherical bearing of the press beam (inclined position):- Electro-hydraulic top drive with 4-cylinder technology:- Optical set-up and positioning aid:- Generous edge clearance:- Flat front covers:- Block hydraulics:- Electronic pressure compensator:- Measuring system with glass scale and deflection compensation:- Hydraulic oil in the machine (lifetime lubrication):- Oil cooler:- Control cabinet cooling via air-to-air heat exchanger:- Modern machine designExtended equi ...

Panel saw STRIEBIG COMPACT TRK 5207 C -used-welded frame with extremely high rigidity, automatically evasive sliding grate, stable detent of the saw carriage at the top and bottom, control panel at eye level---------- Technical data ----------cutting length: 4,600 mm, cutting height: 2,070 mm, cutting depth: 60 mm, saw blade: 250 mm, motor: 3 kW, extraction nozzle: 100 mm, space requirement (LxDxH): 5,716 x 1,500 x 2,814 mm, weight: 850 kgQuality info: - Hinged rail mounts renewed- System strips renewed /

Key data: 530 mm, 300 mm, 4 kW

Table length 800mm Feed speed 5/8/12.5/19.5 m/min 4-strip planer blade shaft Ø110mm 3 upper feed rollers 1 table feed roller Speed planing shaft 5000 rpm electr. Table height adjustment with electr. Advertising Extraction hood Ø150mm Dimensions LxWxH=1070x880x1150mm Wt. approx. 700kg The machine is in use. Changes to technical data, typesetting and printing errors as well as errors are reserved at any time!

Key data: 5000 kN, 80 mm

SANDRETTO 500 T Series 7 Type: 3270/500 Clamping Force: 500 T Screw Diameter: 80 mm Theoretical Injection Volume: 2110 cm³ Injection Weight (PS): 2050 g Screw Working Length (L/D): 20 m Plasticizing Capacity: 290 kg/h Heating Zones: 4 Total Heating Power: 31 kW Mold Thickness (Min/Max): 250-800 mm Opening Stroke (Platen Travel): 830 mm Distance Between tiebars: 720 x 720 mm Oil Tank Capacity: 500 L Dimensions: 9.0 x 1.80 x 2.50 m Total Weight: 25,000 kg

Key data: 19560 KW, 11000 V

Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...

Year: 2017 - technically efficient, ready to work – after full service - split heads - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table - hydraulic lock for reversing the resistance unit

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...

Diesel Generators 1600 kWe / 50Hz with CAT 3516B engines and local control panel We have multiple identical CAT 3516B skid-mounted diesel generating sets available, all manufactured in 2018 and installed in the same HFO power plant, complete with full HFO plant auxiliaries. Each engine is coupled to a 2000 kVA / 415 V / 50 Hz brushless synchronous alternator via a flexible coupling, both mounted on a rigid base frame. These units are optimized for low emissions, high efficiency, and continuous base load operation. The generators have been serviced exclusively by the local CAT dealer and have only 1,500–2,000 operating hours. The standard scope of supply includes: • Engine control panel (EMCP 4) • 24V electric starting system • Radiator cooler Balance of Plant (BOP) equipment is available for customers requiring multiple units. Technical data Engine type CAT  ...

Transnorm belt conveyor GF 4365-600-500 RA2493 Technical data: Conveyor length (NL): 4365 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 45 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 4365 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 Co ...

Transnorm accumulation roller conveyor 19000-600-550 RA2491 Make: Transnorm Roller width (RB): 550 mm Nominal/outer width (NB): 600 mm Length: 19000 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Drive Eletrical Data: 380 V, 0,37 kW Accumulating space size: 700 mm Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: scope of delivery: without supports and side guides Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation Nominal / outside width in mm: 600 Roll width in mm: 550 condition: gut Jam detection: Lichtschranke nominal voltage: 380-480 V Conveyor speed m / s: bitte Kontaktieren Roll division in mm: 76 Conveying length in mm:  ...

Transnorm roller conveyor 3620-600-555 RA2492 Make: Transnorm Roller width (RB): 550 mm Nominal/outer width (NB): 600 mm Length: 3620 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Gear Motor Eletrical Data: 380 V, 0,37 kW Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Construction year: 1995 nominal voltage: 380-480 V Conveying length in mm: 3620 Nominal / outside width in mm: 600 Roll width in mm: 550 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: including side guides without supports For individual, expert advice, simply get in to ...

reus: 3500/6000/8000/10000 U/min Spindle diameter: 30 mm Motor output: 4 kW Holzkraft / SCM Minimax T 55i tilting spindle moulder or bench router for precise routing, profiling and rebating of solid wood and wood-based materials. The machine has a swivel milling spindle and sliding carriage, enabling versatile processing at different angles. Ideal for joineries, furniture construction and interior fittings. Includes feed unit, angle fence and equipment for finger joints in drawer construction. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Format (cm): 54x72 Number of colors: 2 (round+flat)

· Krones Monobloc VK2V 066-103/KK, serial number K090031, built in 1999, capacity 24,000 bottles per hour. · Krones labeller, model 720-18-86-130, serial number K090-C31, built in 1999, output 28,000 bottles per hour. · ZM Jerzy Robak, rinser, model PBSz-01-60, serial number 3.184, year of construction 2014. · Fischer pasteurizer, model 10Pl, serial number 99096, year of manufacture 1999. · Krones crate washer, model KKW-50, serial number 690-095, built in 1995. · Krones crate packer and unpacker, model Linapac, serial number K462-137, built in 1999. · Krones bottle washer, model KES-1-1-190/19-80, serial number 671-214, built in 1998, capacity 28,000 bottles per hour. · Krones conveyor belts with associated control cabinets and control panels

Key data: 1800 KW, 2240 kVA, 415 V

Diesel Generator 5 x CAT 3516B 2000 kVA / 50 Hz – 2023 Never Installed Never installed, surplus CAT 3516B skid mounted diesel generating sets. Engine is coupled with 2000 kVA / 415 V / 50 Hz Leroy Sommer DSG 74L1 brushless synchronous alternator with a flexible coupling, and both mounted on a rigid base frame. These units are designed for standby and prime duty. Main engine control panel EMCP, 24V electric starting system. Technical data Engine type CAT 3516B – 16-cylinder, 1500 rpm diesel engine Alternator Leroy Sommer 2000 kVA / 415V / 50Hz Power factor 0.8 Manufacturing year 2023 Operating hours Zero, never installed Number of units available 5 pcs Prime rating 2000 kVA (1600 kW) Stand by rating 2240 kVA (1800 kW) Control system EMCP 4.2

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

turning diameter over bed: 570 mm turning diameter over slide rest: 365 mm turning length: 3000 mm spindle bore: 62 mm spindle turning speed range: (24) 11,2 - 2240 U/min workpiece weight: 500 kg workpiece weight in steadies max.: 630 kg longitudinal feeds:: 0,063 - 56 mm face feeds: 0,0315 - 28 mm radial face slide travel: 345 mm upper slide-adjustment: 125 kW tailstock quill diameter: 80 mm tailstock quill adjustment: 190 mm main drive motor: 15 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5,5 x 1,44 x 1,38 m Well-maintained lathe from the maintenance department. Equipment and accessories: 3-axis D.R.O., HEIDENHAIN ND 7013 3-jaw chuck FORKARDT F+315 4-jaw chuck RÖHM, 500 mm diameter Feed in upper slide Rapid traverse Lamp Coolant equipment Boring bar holder Center points Multifix tool holder with tool holder Steady rest Machine documentation The data  ...

A programmable Schleuniger stripping machine for coaxial cables is available. Cable diameter step resolution: 0.01mm, max. stripping length: 30mm, max. cable diameter: 7mm, throughput: approx. 350-600/h, cable lists: 100, cable programs: 1000, machine dimensions X/Y/Z: approx. 500mm/150mm/250mm, weight: approx. 10kg. Documentation available. An on-site inspection is possible.

: neu : ca. 6-8 Wochen ab Auftrag : Polen : 26880 € : 513.41 € : 1 : 1 : 30 mm : 60 ° : 500-2920 U/min : 50 - 150 m/min : 3 mm/min : 100 mm : 7.5 kW : 1216 mm : 1275 mm : 850 kg continuous adjustment of spindle speed and feed rate make it suitable for different types of steel and aluminum high speed rotary milling head equipped with 10 inserts cutting inserts for various materials 3D contact wheel control for proper workpiece alignment ergonomic ball roller bench swarf drawer BASIC SET: SBM-500 stationary bevelling machine set of tools user manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used lathe with numerical control HEIDENHEIM PLUS Basic parameters: Diameter: 490 mm, Length 1000 mm Max. diameter over cross slide 280 mm Bed width: 350 mm Spindle bore 65 mm Main motor 12/16 kW Max. speed 2500 /min Feed range 0.01 - 3 mm/rev. Quill stroke 160 mm Quill bore 70 mm Dimensions 2800 x 1800 x 1400 mm Weight 3.2 tons

Manufacturer: Gurki Model: GPS-5030LW Year of Manufacture: 2021 Type of Machine : Angle welding machine Frequency: 50 Hz Phase: 3 Power: 15 kW CE Certified Find more here - / Contact us at -

Manufacturer: Gurki Model: GPL-5545DI Year of Manufacture: 2023 Type of Machine : Angle welding machine CE Certified Voltage: 400 V Frequency: 50/60 Hz Phase: 3 Power: 3 kW Find more here - / Contact us at -

Transnorm conveyor belt GF 5650-600-500 RA2450 Technical data: Conveyor length (NL): 5650 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 41 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 5650 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 ...

Bitzer OSKA 5341-k open Schroef compressor R717 NH3. Open Schroef compressor for ammonia R717. All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Trumpf TruLaser Robot 5020Year of manuf. : 2010 ____________Description:TruDisk 3302 laser system:- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad:- Output power of 3.3 kW at the workpiece:- Laser system with 1 cavity:- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control:- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data:- Fast laser power control:- TruControl 1000 control system:- Storage capacity for 199 laser programmes:- Safety monitoring in accordance with laser safety class 1, including a central safety lock:- Protection class IP54:- 10.4 panel computer with TFT touchscreenExtension of the beam path:Plus 1 additional laser light cable output, including interface card:consisting of::# Optical a ...

Key data: 3000 mm, 1 mm

Schechtl guillotine shears 3mx1.5mm with hand depth stop in top condition, price net.

General SKU253S176 MakeBühler AG (CH) LocationBarneveld TypeCobra 501, SKR 440 Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 volt MaterialStainless steel Information No.10129787 Year of constructionunknown With switchgear(as is) Floorspace2,1x1,1 M Total height2,6 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU234S119 MakeBühler Cobra 501 LocationBarneveld TypeSRK-440 Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 400/690 Volt Information No.10310055 Year of construction1999 With switchgearcheck Floorspace2,1x1,4 M Total height2,,6 M Weight2600 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU241S147 MakeBühler Cobra 501 LocationBarneveld TypeSRK 440 Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia.320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/690 Volt MaterialStainless steel Information No.10208703 Year of construction1992 With switchgear(as is) Floorspace2,3x1,6 M Total height2,8 M Weight2700 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU241S146 MakeBühler Cobra 501 LocationBarneveld TypeSRK 440 Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 Volt MaterialStainless steel Information No.10208704 Year of construction1992 With switchgearcheck Floorspace2,2x1,5 M Total height2,8 M Weight2600 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This APV Gaulin 1056 MC 18-5TPSC aseptic homogeniser is a 3-cylinder machine which is designed for ± 4.500 liter per hour with a maximum pressure of 345 bar. The homogensier is equipped with 2-stages with puppet valve cylinder, both stages manual controlled. Manometer. Motor: 45 kW - 380 V - 98 Amp - 50 Hz - 1.465 rpm. Stainless steel cladded. Oil pumping system outside the machine., Type of Machine: Homogeniser, Capacity: 4.500 liter per hour, Stages: 2 Stages, Max. Pressure: 345 bar, Valve cylinder: Puppet valves, Product: Dairy, Piston diameter: 44 mm, Motor: 45 kW - 380 V - 98 Amp - 50 Hz - 1.465 rpm, Dimensions: 180 x 110 x 180 cm, Weight: 2.115 kg

EBA 550 year: 2000 by estimation cutting width: 550 mm Programmable & Digital safety hood hydraulic clamping adjustable hydraulic cutting

VISCO JET MOTOR WITH PUMP  SSG FIMETT, ADLF 5X18 MULTISTAGE PUMP C/W 4KW MOTOR,4POLES AND 50HZ PLEASE CONTACT FATIMAH (+60136287197) MALAYSIA NUMBER LOCATED AT F25

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 7730 € : 149.19 € : 500 kg : 150 mm : 150 mm : 360 kgm : 230 / 50 V / Hz : 0.37 kW : 0.37 kW : 0.1 - 3 U/min : 45 s : 800 mm : M20X6 mm : 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating ...