129,495 used machines on RESALE, but how to find them? Machine Search
Key data: 550 kN
Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW A ...
Key data: 550 kN
Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 17,083 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW Al ...
Key data: 1500 kN
Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with the Rotary Molding Machine Year of Make: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Spray pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Spar spacing: 0x0 mm Size of the clamping plates: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Vertical Injection Molding Machine with the Rotary Molding Machine Hybrid machine: high-speed, energy-saving and very quiet Air Valve x 5 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Rotary table diameter: 1500 mm Rotary table driven by a servo motor, controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83x1.50x4.07 m All offered machines ...
Key data: 1000 kN
Battenfeld TM 100/525 Year of Make: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Dimensions: Weight: 3900 kg Length/Width/Height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participa ...
Key data: 1000 kN
Battenfeld HM 100/525 with the Battenfeld R10S robot / Operating hours: approx. 19,000 in automatic mode Year of Make: 2008 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Handlebar spacing: 470x420 mm Size of the clamping plates: 680x663 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: approx. 19,000 in automatic mode Total number of operating hours: 26,580 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Battenfeld R10S robot Year of Make: 2015 5-axis robot: 3 axes are driven by servo motors (electric); Axis B - pneumatic, Axis C Robot with adapter Purchase of the r ...
This Impulse IP-175 piston pump is designed for vertical and horizontal drainage. These positive displacement pumps are self-priming and ideal for pumping unlimited quantities of a mixture of water and air. Whats more, this pump can run dry without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , Throughput capacity: 90 m3/h, Max dirt passage: 0 mm, Max. head: 20 MWK, , = More information =, , Year of manufacture: 2026, Applicable material: Water, Empty weight: 1.220 kg, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-31 ...
Key data: 800 kN
Engel Victory 500/80 Tech / Production line with the Engel Viper 12 robot Year of Make: 2011 Injection unit: Screw diameter: 45 mm Injection weight: approx. 295 g Spray pressure: 1598 bar Dosing volume: 318 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Hydraulic core pull x 3 Hardened injection unit - Bimetal Robot Angel Viper 12 Year of Make: 2014 5-axis robot: 4 axes are driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Purchase of the robot at an additional cost Dimensions: Weight: 5300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pumps/motor: 15 kW All off ...
Key data: 1100 kN
Engel Victory 500/110 Tech Ecodrive with the Sepro S5.15 robot / Hybrid machine / Operating hours: approx. in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 40 mm Injection weight: approx. 225 g Spray pressure: 2029 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 740x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Machine in very good technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 6 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Sepro S5.15 robot Year of Make: 2016 5-axis robot: ...
FOR SALE CORE TURBINE CENTRAX 501 KB5 I don't have any more information since the factory has closed LOADED NOW IN FRANCE GOOD PRICE
Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1150 , Powder outlet height (mm): 695
Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1100, Powder outlet height (mm): 815
- Filter area: 2.5m2 - Year of construction: 2001 - Vacuum pump in DIN 1.4404 - Incl. mixing tank with agitator. - With equipment for residual filtration - Flow rate (mucus): 450-500 l/h Dimensions: - Depth: 1400 mm - Length: 2100 mm - Height: 1900 mm - Machine with very few operating hours - Machine in perfect condition
Allgaier vibrating screen, Sieve diameter:: 470 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 230/400 V , Engine: Elektror Motor , Dimensions (mm): 1100x700 H 1200, Powder outlet height (mm): 765
EPPENDORF Refrigerated Centrifuge Type 5417R, Maximum speed: 14000 min-1 , Elec: 230/4.0 V/A / 50 Hz / 600 W , Maximum product density: 1.2 kg/dm-3, Link to manufacturer: .eppendorf/fr-fr/Boutique-en-ligne-et-Produits/Pointes-tubes-et-plaque s/Tubes-c-WebPSub-H-44515?q=%3Arelevance&selectedResultType=Product&pa ge=1
50 litre BCD mixing tank with Huber temperature control (0 to 65°C) With agitation, lid lift, tank lighting, 4 vents. 1 CIP ball All documentation is in English (including FAT) 1 tank of their 1 Huber temperature control system are available., Volume: 57 liters, Useful volume: 50 litres, Metal tank: 316L, Tank metal: 316L, Pressure +: ATM, Pressure -: -6.5 ATM, Elec: 400V 50Hz , Agitation type: Tri-blade / from above, Stirring speed variation: Yes, Engine: ABB, Engine power: 0,25kW, Cover diameter: 450mm, Tank bottom outlet: Yes / 25mm , Event: Yes, Mobile tank: Yes, Double envelope: Yes, Double envelope metal: 304L, Double envelope volume: 10 liters, Double envelope pressure: + 6.5 , Double envelope fluid: Gas Group 2, Metal of the double envelope: 304L, Dimensions (mm): 600 x 1250 mm H2000mm, Weight (kg): 438 / 505 kg, Temperature design: 0-150°C , Design temperature: 0-150°C
General SKU315S527 LocationBarneveld CEcheck MakePannevis TypeRT 575 Main Features MaterialStainless steel Motor0.75 KW Surface1.5 m2 Specified Features - Vacuum belt filter Vacuum belt filtercheck Filter surface1,5 M2 Filter width550 mm Filter length2800 mm With motor0,75 kW 400/230 Volt With variable speed drivecheck Belt speed3.52-0.59 m/min. Knife dischargecheck MaterialStainless steel Information No.1747 Year of construction1996 Floorspace6,3 x 1,8 M Total height1,9 M Weight1700 KgVacuum belt filtersPannevisFilters > Vacuum belt filtersBrand > Pannevis What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU334N528 LocationBarneveld MakeHenschel TypeHU-500 Main Features MaterialAluminium/Stainless steel Volume500 Ltr. Motor15 KW Specified Features - Universal mixer Universal mixercheck Capacity500 Ltr Vessel sizesdia.900mm x650mm With covermanual operated Pneumatic operated outlet 300x200mm With motor15,0 KW, 380 Volt Rotor speed134 rpm Information Mach.No.821197 Year of construction1976 Mounted on framecheck Floorspace2,4x1,8 M Total height3,0 M Weight1100 KGUniversal mixersHenschelMixers > Universal mixersBrand > Henschel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
A CNC 3D coordinate measuring machine Keyence is available. Table diameter: 500mm, measuring diameter: 500mm, measuring height: 200mm, travel X/Y: 280mm, rotation capability: 360°, tilt angle: 45°, max. table load: 50kg, display resolution: 0.1µm, repeatability: 2µm, measuring accuracy: +/-10µm. Machine dimensions X/Y/Z: approx. 720mm/1000mm/860mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible.
used
Gallus KMS 510 Unwind, E+L Web Guide, Teknek Web Cleaner, Arcotec Corona Treater, Infeed Tension Unit, 9 x Servo Flexo Units, Multi stream hot foil unit, Turning Tower Lamination Unit, GEW UV System, Chill Rolls, Waste matrix tower Rotary die cutting/embossing unit Register Control, Sensotec Web Inspection System AVT Video Control BST Chiller HYFRA Print cylinder 116 Anilox 29 Gallus FSM 510, 20" Flatbed Diecutters Web decurling unit two decurlers, one on the press and one on the die cutter Windowing/Stripping unit Belt delivery unit many accessories
Arburg 320A 500-170 with the Sprue Picker / Electric Machine Year of Make: 2005 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Hardened injection unit - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Dimensions: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the sele ...
Key data: 500 kN
Arburg 320C 500-170 with the Wittmann W811 robot Year of manufacture: 12/2006 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Robot Wittmann W811 Year of Make: 2010 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot at an additional co ...
Key data: 500 kN
Arburg 320C 500-170 Year of Make: 2011 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Operating hours: approx. 35,000 h in automatic mode Control with air valve Core train control Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2310 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pumps/motor: 11 kW Heating capacity: 9.4 kW Total power: 20.4 kW All offered machines are started by our service technicians before they are sold. It is possible to re ...
Arburg 320C 500-100 / Excellent technical condition Year of manufacture: 10.2004 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Spray pressure: 2000 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: The machine is in excellent technical condition and has been used to test injection molds Operating hours: 25,739 h in automatic mode Total number of operating hours: 30,661 h Hydraulic core pull x 1 Reinforced Injection Units – Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure It is possible to change the screw diameter to smaller or larger: 20 mm or 30 mm Di ...
Arburg 320C 500-250 Year of Make: 2004 Injection unit: Screw diameter: 35 mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Dimensions: Weight: 2330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 500 kN
Arburg 320S 500-60 Year of Make: 2003 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Spray pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Dimensions: Weight: 2350 kg Length/Width/Height: 3.32x1.24x1.81 m Drive: Pumps/motor: 11 kW Heating power: 4 kW Total power: 15 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Arburg 320C 500-170 e² / Hybrid machine Year of Make: 2014 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Operating hours: 48,000 h in automatic mode Air Valve x 2 Core train control Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit – precise injection Dimensions: Weight: 2210 kg Length/Width/Height: 3.41x1.43x1.99 m All offered machines are started by our service technicians before they are sold. It is possible to rec ...
Key data: 500 kN
Arburg 370S 500-70 Year of manufacture: 08.2010 Injection unit: Screw diameter: 25 mm Injection weight: 40 g Spray pressure: 1550 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 8 Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Possibility of adjusting the vertical injection unit with the help of special brackets It is possible to change the screw diameter to 22, 25 or 30 mm Dimensions: Weight: 3170 kg Length/Width/Height: 3.48x1.46x2.03 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machi ...
Key data: 1300 kN
Arburg 520S 1300-800 / Machine in very good technical condition Year of Make: 2008 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 130 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air Valve x 2 Hardened injection unit - Bimetal The machine was regularly serviced by the authorised service Arburg in Germany Dimensions: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or ...
Arburg 520H 1500-400 e² / Hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 on the side of the fixed clamping plate Air valve x 3 on the side of the movable clamping plate Hydraulic core pull x 1 on the side of the fixed clamping plate Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitroge ...
Key data: 1500 kN
Arburg 520H 1500-400 e² / Hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Core train control Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubrication Parallel movements Priamus Sensor - Tool Pressure Control Dimension ...
Key data: 1600 kN
Arburg 520S 1600-400/170 e² / Production line with the Geiger robot Year of Make: 2012 Injection unit: Screw diameter: 35 mm Injection weight: 141 g Spray pressure: 2500 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Geiger Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 5 Control with hot runners x 12 Reinforced Injection Units – Bimetal Machine with two cylinders / batteries with compressed nitrogen (extra charge for fast work) Parallel movements Screw diameter in vertical injection unit: ⌀30 mm - 77 g/hp Built-in Arburg c ...
Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of Make: 2003 Injection unit: Screw diameter: 40 mm Injection weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K Machine Air Valve x 1 Hydraulic core pull x 5 Control with hot runners Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying The vertical injection unit - screw diameter: ⌀25 mm - 49 g/hp All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine o ...
Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ni ...
Key data: 2000 kN
Arburg 570H 2000-800 e² / Hybrid machine / Production line with the Arburg Multilift Select robot Year of Make: 2011 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lu ...
Scania Emergency Power Generator 500 / 550 kVA NEW - - - - - Engine: - Scania (Sweden) - Model: DCI13 - 6 cylinders - Diesel - Water-cooled - 1500 rpm - Power: 582 hp - - - - - Generator: - Leroy & Somer (France) - 500 / 550 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Switching Unit: - Digital start unit with display (ComAp AMF25) - With automatic start function - Generator monitoring: Volts, Amperes, Hertz, KW - Engine monitoring - - - - - Other data: - Dimensions: 516 x 160 cm - Weight: 3950 kg - Tank capacity: 990 liters - Consumption: 48.8 l/h (50%) / 71.7 l/h (75%) - - - - - Scope of delivery: - Scania generator set 500 / 550 kVA - In a soundproofed housing - With start unit / control - Tank - Battery - Exhaust / silencer - - - - - Price and payment: - €51,000 net + 19 % VAT = €60,690 - I ...
Manufacturer ZAYER Model 30 KMU-5000 Year 1999 CNC HEIDENHAIN TNC-430PA Table surface 4,700 x 1,200 mm. Strokes (X/Y/Z) 3,400/1,250/2,000 mm. Shaft Outlet (W Axis) 500 mm. ISO-50 Head Cone Main Motor Power 37 kW 45º Automatic Head INCLUDED Head Rotation 45º Automatic Rotation 0.001º/0.001º Head revolutions 45º 3,000 rpm 45º ISO-50 Head Cone Continuous Twist Head INCLUDED Twist head revolutions 3,000 rpm Twist Head Cone ISO-50 Ram with cane INCLUDED Shank diameter 150 mm. ISO-50 Rod Cone Internal and external cooling head 45º and rod INCLUDED External cooling twist head INCLUDED Semi-automatic head pickup INCLUDED Automatic Loading Tools INCLUDED Loader Positions Htas 60 AITEK Pickup Station for 45º head storage and Twist Head INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel RENISHAW MP 16+SP2/1 Piece Measurement Probe Motors + ...
Certus Steam Boiler & Water Tank Type: Junior 500 CVE Manufacture Year: 2012 Please see photos for further specification and information. For more information and more available stock please visit us at - advancedbrewing.co.uk
For sale is an EPS block mold, manufacturer Erlenbach, year of construction 2008, 5000 mm x1300 mm x1000 mm, vacuum system, The system ran very well until the end. The facility can be visited by prior appointment
For sale is a Styrofoam block press manufacturer Wemhöhner, the press is in good condition and can be viewed by appointment. I will be happy to answer any further questions you may have.
IDEAL 5221-90 – Professional Pile Cutting Machine Powerful and precise paper stack cutting machine for printers, copy shops and offices. The IDEAL 5221-90 impresses with a cutting width of 520 mm and a cutting height of up to 80 mm, ideal for large paper stacks. The electric backgauge with digital measurement display enables fast and accurate work. Thanks to high-quality Solingen knife steel, clean and precise cuts are guaranteed. The SCS safety system ensures maximum safety during operation. ✔ Cutting width: 520 mm ✔ Cutting height: up to 80 mm ✔ Electric backgauge ✔ Digital measurement display ✔ Robust professional quality Ideal for professional cutting work with high demands on precision and reliability.
Type: 604-518 Serial number: 120002743-10 Year of construction: 2018 Drum: 1.3 mm Compressed air: 6 Bar, 50 l/min Power: 3 x 415V, 50Hz, 8.5kW Dimensions: 1500 x 1700 x 2400 mm Weight: 1460 kg Working hours: 1465 hours With hopper and tamping device
Flat conveyor belt on aluminium substructure Length of the strap 515 cm, width of the strap 85 cm With the regulation of the amount Conveyor belt mobile, on wheels
Cart beam punching machine / travelling head die cutting press 25 ton, 1600 x 500 mm, punching head 500 x 500 mm with 2-hand touch triggering, with light curtain approx. 1500 kg
VERTICAL MULTISTAGE PUMP C/W 4KW MOTOR, 4 POLES AND 50HZ
Manufacturer: Jung, Model: JF 520 Year of Manufacture: 1979 Machine Type : Grinding Machine Electrical Specifications - Voltage: 380 V - Phases: 3 - Frequency: 50 Hz - Nominal current: 30 A - Supply fuses: 35 A - Control voltage: 220 V Find more here - / Contact us at -
Used Used Capper Arol Gemini 2.500 bph: Year: 1984 Condition: Good Used Capper Arol Gemini 2.500 bph: Year: 1984 Speed: 2.500 bph Model: gemini Direction: clockwise Number of heads: 1 Type of cap: natural straight cork Bottle formats: 750 cl e 1.5 lt Safety protections Code: X 407 More details: https://bottlingscout.com
maximum number of results exceeded
please refine your search
