filler 5 l used for sale

Knapp angled roller conveyor accumulation 2430-510-450 RA2380 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 2430 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Roller angle: 7.6° Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES Roll width in mm: 450 Nominal / outside width in mm: 510 nominal voltage: 24V Engine type: Interroll EC 300 Roll division in mm: 60 Conveyor speed m / s: frei einstellbar bis 1,25m/s Jam dete ...

Injection moulding machine Krauss Maffei KM 800-5700 BJ 1999 Technical data on request

Key data: 260 mm, 500 mm

Turning-milling centre Manufacturer: Mori Seiki Type NL1500SY/500 Year of construction 2007 In operation 03/2008 Control MSX-850-III Y and C axis All 12 turret stations are powered Max. turning length 500mm max. turning diameter 260mm Spindle Passage 50mm Speed of the driven tools 6,000 rpm Feeds X Z B 30,000 Y 10,000 with LNS rod loading magazine, length 1000mm, max D 65mm reducer sleeves. Machine is sold with all accessories, steel holders, AGWs (all still very good) collets, chuck, pick-up chuck, documentation, extraction system. Machine only ran in single-shift operation.

Bibby 5000L Holding tank 316 Stainless, 5000L holding tank, central bottom discharge with level sensor

Pharmatec 500-S4 Multistage pressure column distillation unit Stainless, designed for the production of sterile, non-pyrogenic water for injection (WFI), all mounted on skid, four column system, 660 l/h pressurized heating steam, 4Bar, adjustable controls, 3Ph

Used Sealing Edge Machine Poly-Bagging PP, Type: 500 BM - Automatic feeding and sealing of films - Packaging of various products, especially for shipping, storage or retail packaging - The machine is designed for durability and functionality in production environments Visits and test runs are possible by arrangement.

Reconditioned 5 axis robot CMA mod. ROBY 5EX-G - N. 5 controlled axis - N. 3 supports - Wrist capacity 3 kg Carrousel - N. 3 supports - Arm capacity 25 kg. - With manual and CE certificate RETROFIT 2025

Mash Tun 5bbl working capacity, vertical cylindrical stainless steel vessel, with side entry door. Sparge Bridge with CIP spray ball. 2 section lift of lid. 2 section drilled plate floor. Year of Manufacture: 2015 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

50 HL Brewhouse Manufactured by fabdec in 2013 Gas Fired brew house consisting of Mash tun/kettle/hot liquor tank/underback/heat exchanger/wort pump/swing bend plate /work platform/gas burner and associated pipework and fittings This is a SECOND HAND brewhouse and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk For more information and more available stock please visit us at - advancedbrewing.co.uk

Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible.

Dematic roller curve right 90°-500-440 IR795 RA2462 Make: Dematic Running direction: 90° right running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: 0.6 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and i ...

5UKBBL / 800Liter Brewery Stainless Steel, Insulated & Clad in Wood. Mash Tun with Wedge-wire Floor Plates & Front Manway. Copper with 18kW & 12kW Elements (both new) & Copper Dome Top. Hot Liquor Tank with 2 x 18kW Elements; One New. 3 x Fermenting Vessels with Temperature Probes, Tops & Lids; Raised On Stainless Steel Legs. Cold Liquor Tank, raised on Stainless Steel Legs. Underback / Hopback Vessel. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

General SKU422U1436 LocationBarneveld MakeSiebtechnik TypePerflux 501 Main Features MaterialStainless steel Surface0.75 m2 Sizes diameter500 mm Specified Features - Vibro sieve MaterialStainless steel 1.4301 (304) Vibro sievecheck Sieve surface0,75m² Number of sieve decks:1 Sieve sizesDia. 500 mm InletDia. 500 mm OutletDia. 500 mm Drive vibro motorcheck Motor0,16kW, 400Volt Sieve perforation3,15mm With extra sieve decks3,15 mm (2x) Information No.106/26598/0 Year of construction2006 Mounted on stainl. st. framecheck Floor space1x0,6 m Total height0,6 m Weight100 kgVibro sievesSiebtechnikSieves > Vibro sievesBrand > Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please  ...

This WAGNER WDE 500 was manufactured in 2007. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Consider the opportunity to buy this WAGNER WDE 500 horizontal turning machine. Contact us for more information.

This Mazak Mega Turn 500 was manufactured in 2017. A robust vertical turning machine featuring a Mazatrol Smooth G control unit, it offers a maximum workable diameter of 500 mm and includes a 12-position turret plus a 10-station ATC with Capto C6. Additional features include a high-pressure coolant system at 15 bar and an automatic tool presetter. Contact us for more information about this machine.

This 3-axis MORI SEIKI NL 2000 SY/500 was manufactured in 2005. A horizontal turning machine featuring a BF interface and live tools, it also includes a tool setter on both spindles. If you are looking to get high quality turning and milling capabilities consider the MORI SEIKI NL 2000 SY/500 machine we have for sale. Contact us for more information.

This BIGLIA B 501 MB (1997) Lathe machine was manufactured in 1997. This machine has a tank capacity of 200 liters and a pump flow rate of 100 liters per minute, driven by a pump motor with 0.5 kW power. Regarding its axis specifications, the x-axis has a travel distance of 210+5 mm and moves at a speed of 20 meters per minute, while the z-axis travels a distance of 500+10 mm at the same speed. Contact us anytime for further information.

This 6-axis MORI SEIKI NL2000SY/500 was manufactured in 2005, featuring X-axis travel of 260 mm, Z-axis travel of 590 mm, spindle power of 5.5 kW, and a spindle speed of 6,000 rpm. It includes a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2000SY/500 machine we have for sale.Contact us for more information.

This 3-axis DMG MORI CTX Alpha 500 V6 was manufactured in 2021. A versatile turn-mill centre featuring a Siemens 840D controller, ERGOline interface, and CELOS manufacturing support. It offers a 470 mm machining length, 6000 rpm max speed, and a 12-position Sauter turret with live tooling. Ideal for complex machining tasks. Contact us for more information about this machine.

This Romi C 510 was manufactured in 2014. It features a milling spindle with ISO 50 taper, automatic tool clamping, and hardened guide surfaces. The machine operates with a standard spindle speed range of 56-2800 and includes automatic lubrication and cycle functions for efficient operation. If you are looking to get high-quality turning capabilities, consider the Romi C 510 machine we have for sale. Contact us for more information.

This ASYS Divisio 5100 is an automatic depaneling system manufactured in 2023. Contact us for more information.

This Grecon Dimter FDL-F 205/600/500 was manufactured in 1997. It is designed for woodworking applications, offering robust performance and reliability. Ideal for handling a variety of wood processing tasks efficiently. Contact us for more information about this machine.

This 4-axis Yida MH-500 horizontal machining center was manufactured in 2009. It features a spindle speed of up to 10,000 rpm, a pallet size of 500 × 500 mm, and a tool magazine with a 40-tool capacity. Ideal for high-precision machining with its LM linear guideways and rapid traverse rates. If you are looking to get high-quality milling capabilities, consider the Yida MH-500 machine we have for sale. Contact us for more information about this machine.

This 4-axis KAFO HMC-500 was manufactured in 2019 and features a robust FANUC 0i-F control unit. With a spindle speed of up to 10,000 rpm and a tool magazine capacity of 40 tools, it ensures efficient machining. The machine has a pallet size of 500x500 mm and a maximum workpiece size of Ø700 mm by 800 mm. Consider the opportunity to buy this KAFO HMC-500 horizontal machining centre. Contact us for more information about this machine.

This Krauss Maffei 125-520 C1 was manufactured in 2001. It features a MC4 controller, Euromap Interface 12, and a screw diameter of 50 mm. With a maximum pressure of 1521 bar and an injection volume of 340 cm³, it is ideal for precision moulding tasks. Contact us for more information.

This 5-axis Mazak VARIAXIS J-500 was manufactured in 2017. It features a Mazatrol Matrix Nexus 2 control, a Φ500 mm × 400 mm table, and can handle a maximum load of 200 kg. The spindle supports a BT40 tool shank and reaches up to 12,000 rpm. Dimensions are 2,565 mm × 3,225 mm × 2,840 mm, and it includes a chip conveyor and through-spindle coolant. Consider the opportunity to buy this Mazak VARIAXIS J-500 vertical machining centre. Contact us for more information.

This 5-axis Mazak Variaxis 500-5X II was manufactured in 2007. Ideal for complex and precise machining tasks, this vertical machining center offers versatility and reliability. If you are looking to get high-quality milling capabilities, consider the Mazak Variaxis 500-5X II machine we have for sale. Contact us for more information.

This Netstal EVOS 5500-2900 Speed was manufactured in 2013. Ideal for high-speed plastic processing, it ensures efficient operations with minimal downtime. A robust choice for your production needs. Contact us for more information.

This 3-axis NCT VD-510S was manufactured in 2017 and features a vertical machining centre with X: 510 mm, Y: 406 mm, and Z: 330 mm travel distances. It boasts a high turnover rate of 18,000 and a BT30 bracket, equipped with 21 tool slots. If you are looking to get high-quality milling capabilities, consider the NCT VD-510S machine we have for sale. Contact us for more information about this machine.

This 3-axis MORI SEIKI CV-500 was manufactured in 1999. Ideal for precision CNC milling, this machine maintains robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI CV-500 machine we have for sale. Contact us for more information.

This Mazak NEXUS 5000 II was manufactured in 2007. It features a table size of 500 x 500 mm, capable of handling weights up to 500 kg. Equipped with a high-speed spindle at 18,000 rpm and a spindle motor power of 18.5 kW, it ensures efficient machining. Includes a 40-position tool changer and Mazatrol Matrix control for enhanced precision. Contact us for more information about this machine.

This DN SOLUTIONS NHP 5000 Horizontal Machining center was manufactured in the year 2021. It is equipped with a FANUC 31I-MODEL B control unit and has 4 axis. The machine has a spindle speed of 15000 rpm.

This TONGTAI HA-500II Horizontal Machining center was manufactured in the year 2016 in Taiwan. It is equipped with a Fanuc control unit and has 4 axis. The machine has a spindle speed of 12000 rpm.

This 5-axis KOVOSVIT MAS MCV 1000 Speed 5AX was manufactured in 2011. It features a spindle speed range of 20-12,000 rpm and a spindle drive power of 33/45 kW. The machine can handle a maximum tool weight of 6.5 kg and includes a 30-tool magazine. With a table load capacity of 400 kg and dimensions of 5145 x 3665 x 3330mm, its ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the KOVOSVIT MAS MCV 1000 Speed 5AX machine we have for sale. Contact us for more information.

This 7-axis STAMA MC 526/M was manufactured in 2005, featuring a Siemens Sinumerik 840 D control system. It includes a milling spindle with a speed of 10,500 rpm and a turning spindle speed of 5,000 rpm. The machine offers a tool magazine with 132 tools capacity and rapid traverse rates up to 60 m/min. Ideal for complex milling and turning tasks. If you are looking to get high-quality milling and turning capabilities consider the STAMA MC 526/M machine we have for sale. Contact us for more information.

This 3-axis Mazak VCN 510C was manufactured in 2003. It features a spindle speed of 12,000 rpm with an SK40 taper and a tool magazine with 30 positions. The table size is approximately 1300 × 550 mm, and it includes a cooling system with 15 bar internal pressure. Consider the opportunity to buy this Mazak VCN 510C vertical machining centre. Contact us for more information.

This 5-axis Mazak Variaxis i-500 was manufactured in 2019, featuring a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 tools. It supports workpieces up to Ø500 mm by 350 mm and has a table load capacity of 300 kg. Consider the opportunity to buy this Mazak Variaxis i-500 universal machining centre. Contact us for more information about this machine.

Manufacturer: Trumpf Model:TC 500 Machine type: Punching machine Find more here - / Contact us at -

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 36.3 Kw, Rated Speed: 2800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c2-2-c6m-51465 56-new/42382, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 300 kg, Type number: C2.2 C6M-5146556

This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information.

This Stama MC 535 Vertical Machining center was manufactured in the year 2001 in Germany. It is equipped with 4 t-slots and operates with 3-axis. The max. workpiece weight is 3000 kg and the max. spindle speed 8000 rpm. The machine is in top condition and fully operational with currently 18,485 operating hours. It will be sold because of replacement with a new and larger one. For the moment it is not connected but upon agreement, on-site testing is possible.

This 5-axis KAFO KFO 620 5AX was manufactured in 2019. It features a spindle speed of 12,000 rpm, a tool changer with a capacity of 40 tools, and a spindle taper SK 40. The machine dimensions are 4210x2325x3108 mm, and it weighs 9500 kg. It includes a chip conveyor, spindle oil cooler, and is CE compliant. If you are looking to get high-quality milling capabilities consider the KAFO KFO 620 5AX machine we have for sale. Contact us for more information.

This 5-axis RASOMA EBZ 200-500 was manufactured in 2018, featuring a robust 16,000 kg weight and comprehensive dimensions of 10800 × 2700 × 3100 mm. It includes a high-performance tool spindle with a 7.5 kW Siemens motor, capable of speeds up to 2000 rpm, and advanced cooling and hydraulic systems ensuring efficient operation. If you are looking to get high-quality milling capabilities consider the RASOMA EBZ 200-500 machine we have for sale. Contact us for more information about this machine.

This 5-axis POSmill H 500 U was manufactured in 2018, featuring a vertical machining center with X-620, Y-820, Z-650 travel dimensions, and a 60-space workshop. It includes internal coolant supply plus air cooling and is equipped with a Heidenhain iTNC-530 control for five-axis simultaneous milling. If you are looking to get high-quality milling capabilities consider the POSmill H 500 U machine we have for sale. Contact us for more information about this machine.

A Baader refiner for the separation of soft and solid components is available. Throughput capacity: approx. 800kg/h, connected load: 3kW, drum hole diameter: 1mm, machine dimensions X/Y/Z: approx. 1100mm/900mm/1300mm, weight: approx. 450kg. An on-site inspection is possible.

This STAMA MC 520 was manufactured in 1994. It features a robust vertical machining centre with a clamping area up to 3000 x 430 mm and a permissible table load of 1600 kp. Equipped with a high-speed spindle capable of 6000 rpm and optional 10000 rpm, it ensures efficient machining. The machine includes a 60-position SK40 tool magazine and a scraper belt chip conveyor. Contact us for more information about this machine.

This 3-axis Hyundai WIA KF 5600 vertical machining center was manufactured in 2018. It features a 30-position automatic tool changer, a high-speed spindle at 15,000 rpm with BBT40 taper, and advanced Siemens software options including 3D simulation and real-time machining recording. Ideal for precision machining with its equipped glass rods for accurate measurements. Consider the opportunity to buy this Hyundai WIA KF 5600 vertical machining center. Contact us for more information about this machine.

This 3-axis DOOSAN DNM 500 vertical machining center was manufactured in 2010. It features a large table size of 1200x540mm, capable of handling loads up to 800 kg. The machine operates with a speed of 36 m/min and includes a BT40 tool holder. Ideal for robust milling operations, the DOOSAN DNM 500 machine we have for sale represents a significant opportunity. Contact us for more information.

Transnorm Rising falling Incline belt conveyor with arch GF 2900-8100-600-500 RA2464 Technical data: Conveyor length (NL): 11000 mm ( 2900 mm arch + 8100 mm riser segment ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 11000 ( 2900 + 8100 ) Nominal / outside width in mm: 600 Belt width in ...

This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x 406 x 508 mm, and the table can support up to 1350 kg. Consider the opportunity to buy this HAAS VCE 550 vertical machining centre. Contact us for more information about this machine.