filler 5 l used for sale

turning diameter: 2000 mm turning length: 5000 mm turning diameter over slide rest: 1050 mm turning diameter over bed: 2000 mm faceplate diameter max.: 1200 mm spindle turning speed range: 1,6 - 250 U/min main drive motor: 110 kW max. workpiece weight between centres: 25 t workpiece weight max.: 40 t centre height: 700 mm swing diameter max. over bed cover: 1140 mm max.workpiece weight:each extra steadyrest: 3000 kg total power requirement: 120 kW weight of the machine ca.: 55 t dimensions of the machine ca.: - m - Face Plate Ø 1200 mm - Coolant - Rapid travel - Tail stock mit Face Plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications Maximum pressure: 4 tons Press force: 1.14 kg/cm² Bale size: 700x500x600 mm Bale weight: approx. 60 kg Power connection: 230V / 1.1 kW Year of Make: 2012 Productivity: approx. 3 bales/hour Price: on request Machine is fully functional after technical supervision. If you have any questions, please call us: +48 696 072 985

5-axis machining center for machining aluminum profiles. Max. length: 7,500 mm Min. W x H: 30 x 30 mm Max. W x H: 400 x 300 mm Description: -Mill -Drill -Saw -Jack -Tapping - Chip machining 16 tool positions

sheet width - max.: 1010 mm plate thickness: 4.0 mm ST plate thickness: 2.5 mm VA plate thickness: 6.0 mm ALU number of strokes - loaded: max. 20 Hübe/min cutting angle: 1.5 ° work height max.: 900 mm Control: ELGO total power requirement: 5.5 kW weight of the machine ca.: 2200 kg. from a maintenance workshop good condition () Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge Includes NC ELGO positioning control TYP 85 - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale - 2x support arms - 1x freely movable foot switch - Original operating instructions Special accessories included: - Pneumatic holding device for thin sheet metal blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible.

Komptech Crambo 5200 Direct Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447184 Power: 328 kW/446 hp Weight: 26 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: 3-axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)

Komptech Crambo 5200 Direct (New) Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447242 Power: 328 kW/446 hp Weight: 27 300 kg Emission class: Tier 4 Final / Stage V Equipment and description: 4472423 Axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)

Komptech Terminator 5000 SD Category: Garbage Shredders Specification: Category: Universal Waste Shredder Serial / reference number: 481148 Power: 446 hp / 328 kW Weight: 27 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: Terminator 5000 S Diesel engine: CAT C13 Tier 4 Final/Stage V F-Crushing Unit Armoured rollers – new Sickle teeth Hydraulically adjustable cutting gap 0-45 mm Overbelt magnet Central lubrication Remote control

ZERMA PM 500 PVC PULVERIZER, average throughput rate 500 kg/h, Disc diameter: 500 mm, 24 kW drive, Total installed power: 79 kW (200 A), including metal detector, Vibrating screen, 2-place big bag filling station, Loading screw and cyclon, Centralized dust extraction system Donaldson TDS8 year 2018, N.2 new spare discs, Complete valve and piping system, Test possible, installed power - used power in work: about 60-65% : 79 kw, conditions: testable

- 3 Guide ways construction - Double V Prima guide ways - Steady rest 600 mm - Steady rest 7800 mm - 4 Chuck 800 mm - Oil Country 160 spindle bore - Optional Larger chuck up to 1500 mm

Key data: 510 mm, 1100 mm

Year of construction 2010 Turning length 1000 mm Turning diameter bed Ø 510 mm Turning diameter carriage 300 mm Spindle bore 80 mm Power spindle 16 kW Bed width 330 mm Quill 75 Ø Jaw stroke 160 mm Spindle mount 5 Mk Speed 2500 rpm Feed X - axis 8000 mm/min. Feed Z-axis 8000 mm/min. Length 3200 mm Height 1800 mm Width 1800 mm

DUAL-SHAFT HYDRAULIC MULTI-PURPOSE PRIMARY SHREDDER, Loading hopper, bespoke to project and feeding system, Sturdy supporting structure in carbon steel height 2 mt from floor, with catwalk and rails, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Knives : 75 or 100 mm thick 4 hooks or bespoke, Hydraulic motor 75 kw, 400 V/50 Hz, hydraulic power unit,, electrical control panel with PLC and connection for remote assistance, automatic overload reversal with programmable number of reverse cycles, Delivery : about 4-5 months from confirmation (excluding Winter/Summer holidays), Complete with electrical drawings, User manual, CE compliance, Possible addition of loading and extraction belt with metal separator, width: 1.500 mm, Power: 75 kw

A Euromac doctor rewinder for unwinding and rewinding web materials on rolls is available. Web width: 450mm, max. speed: 400m/min, materials: paper/aluminum/composite materials, material thickness range: 30µm-100µm, max. parent roll diameter: 520mm, max. roll weight: 100kg, max. rewind diameter: 520mm, max. core/adapter inner diameter: 76mm/120mm. Including Häwa water cooling, floor scanner, and side safety fence. Documentation available. An on-site inspection is possible.

sheet width: 4040 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 7,50 t dimensions of the machine ca.: m Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet metal support Side fence and table extensions Cut length limiter Cut edge lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Krpan 4.5 E forestry winch, shield width 1.42m, pulling force 45 kN (4.5t), braking force 56 kN, 70m Ø 9 mm compacted rope, rope speed 0.6 m/s, weight without rope 350 kg, ! Required tractor power: 35-45 kW / 48-60 HP

Schäffer 5470Z wheel loader, Technical data:, - Year of construction: 2022, - Operating hours: 450h, - Operating weight cabin with standard equipment, driver and standard bucket: 5,215 kg, - Lifting capacity: 3,600 kg, - Flow rate / option: 64 l/min / 74 l/min, - Pressure: 210 bar, Equipment:, - volume scoop, - pallet forks, - hydraulic quick coupler, Dimensions [see image in attachment]:, - (A) Wheelbase: 2,050 mm, - (B) Chassis length: 4,700 mm, - (C) Total length with standard bucket: 5,250 mm, - (D) Digging depth: 80 mm, - (E) Working height max.: 3,900 mm, - (G) Loading height with pallet forks: 3,120 mm, - (H) Max. discharge height: 2,500 mm, - (I) Height of front end: 1,530 mm, - (J) Dumping range: 420 mm, - (K) Seat height: 1,340 mm, - (L) Height cabin / option: 2,570 / 2,450 mm, - (M) Lifting height (tool pivot point) max.: 3,250 mm, - (N) Total width series / option: 1,740 - 1 ...

50 cm width, receiving width: 20.5 cm, shaft spacing: approx. 20 cm, shaft diameter 40 mm

Offer 25319 Specifications: - Drilling capacity in steel ST 60 35 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Drilling spindle speeds 65 - 3250 rpm - 3 feeds 0.1 / 0.2 / 0.3 mm/rev - Projection 320 mm - Max. distance table - drilling spindle 560 mm - Table with 2 T-slots 500 x 420 mm - Height adjustable via rack with hand crank - Table left + right tiltable - Drive 400 V / 1.5 kW - Space requirement approx. W 550 x H 2200 x D 900 mm - Weight approx. 550 kg - with: - Right – Counterclockwise - Coolant device -Lighting

Müro A4/5000 block size press; good condition; cleaned and tested; Heat baffle; Stack increase; optionally with dryer. Block gluing machine Müro A4/5000; good condition; cleaned and checked; pile elevation; heating sheet; for option with heater.

Paint Mixer Olbrich RM 501; cleaned and tested; suitable for 0.5 to 10kg cans. Ink mixer Olbrich RM 501; cleaned and checked; used for 0,5 till 10kg cans.

x-travel: 500 mm y-travel: 350 mm z-travel: 375 mm turning speed range: 63 - 4000 U/min spindle taper ISO: 40 table surface area: 800 360 mm total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2 2 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Impressions=0 m, Condition= Good , Availability= 2025-11-03, Pile turner Max weight 500kg Top working condition

HUGO BECK high-performance shrink tunnel type SLB 5012/25, pass-through width: 500mm, pass-through height: 230mm, tunnel hood length: 1200mm, working height: adjustable from 850mm +/- 50mm, maximum temperature: 250°C, rod chain conveyor infinitely adjustable from 5 to 30m/min. Inspection possible by appointment.

Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, 1xreserve knife

New Part Number: 0209 2231 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

New Part Number: 0209 2230 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Injection moulding machine for food and beverages caps

Clamping Force: 200 ton

Injection moulding machine for PET preforms

Screw Diameter: 50 mm // Throughput: 150 kg/h

Container Size (Max.): 2,5 l

A Hamba cup filling machine is available. Lanes: 4, max. cup diameter: 127mm, max. cup height: 130mm, nominal capacity: 9600cups/h. Machine dimensions X/Y/Z: approx. 10000mm/1700mm/2500mm, weight: approx. 5000kg. Documentation available. An on-site inspection is possible.

Sica Starbell Ce Ud Dswmrgvovycshd

Offer 25348 Specifications: - Plate length approx. 5500 mm - Plate width approx. 2000 mm - Plate height approx. 350 mm - Thickness of the top plate approx. 80 mm - 8 T-slots in table surface length 5500 mm - Center distance of the T-slots in the table surface 255 mm each - Center distance of the T-slots from outer edge 110 mm - T - groove width approx. 40 / 60 mm - T - groove depth approx. 62 mm - Required space L 5600 x D 2020 x H 350 mm - Weight approx. 10200 kg

Reference ID PP-53792 Category 5-Colors Manufacturer Komori Model LS 540+LX Year Built 2007 Color 5 Impression 50 Working Hours - Speed 16000 sheets/h Max. size 72x103 cm Min. Size - Condition Good Location Europe Availability Immediately Machine Description 5 colors and varnish PQC-S KMS4 KHS X-Rite IntelliTrax, all 3 automatic washers, Preset CX equipment up to 1 mm thickness, double size of impression cylinders, full APC Ink Units Tempera-Ture Control Komorimatic Tresu anilox coater Grafix Megatronic poeder spray Technotrans Alpha D 60 L-5 chiller Baldwin IR/hot air CIP 3/4 impressions: 50 millions

Turbine Control Woodward 505 Turbine control, built in 2007 of 2600 KW Condensation turbine with 0 operating hours 1 available. 3.3 KV / 100 V, 50 Hz, 626 A Price: 6,900 €, plus VAT, FCA-free. Turbine Control Woodward 505 Manufacturer: Woodward Type: Turbine Control Rated power [KVA]: 3,575 Voltage [V]: 3.3 KV / 100 V Frequency [Hz]: 50 Operating voltage [V]: 24 Rated voltage [A]: 626 Year of Make: 2007 Dimensions [m]: 1.60 x 0.60 x 2.00 Weight [kg]: 500

Washing machine Ultron UNPRZ-500 MPS No 21/9/0619 Year of manufacture 2022 Temperature control range washing, rinsing 20-80C Max Drying Temperature 100C Usable tunnel height 300mm Width 500mm Power of the washer heater 45.6kW Rinse aid heater power 53.2kW Power of the drying units 24kW Drying fan power 26kW Nominal power 185kW Weight 4000kg

Turntable diameter: 1640mm, max. pallet height: 2000mm, max. film width: 500mm, max. film roll diameter: 300mm, max. film core diameter: 76mm, film thickness range: 17µm-35µm, max. roll weight: 20kg. Machine dimensions X/Y/Z: 2800mm/1650mm/2800mm, weight: approx. 450kg. An on-site inspection is possible.

An air cushion machine Brüninghaus (Fromm) is available. Film width: 420mm, max. film roll diameter: 280mm, film length range: 500mm-1000mm, film core diameter: 76mm, film type: AIRPAD, film thickness range: 0.042mm-0.08mm, capacity: 25-49 cycles/min. Machine dimensions X/Y/Z: approx. 2100mm/800mm/1300mm, weight: approx. 270kg. Documentation available. An on-site inspection is possible.

1 press system, manufacturer Exner, type EXSBZRD 500/100, built in 2002, drive power 121 kW, pressing force 5,000 kN, overhauled in 2018, stroke length max. 600 mm, working speed max. 16/30 mm/s, machine weight 82,000 kg, table size approx. 1,000 x 3,000 mm, control system, manufacturer Siemens, type Simatic Multipanel, separate two-hand control, upstream light barrier, manufacturer Sick, separate control panel, manufacturer Rittal, control system, manufacturer Siemens, type OP17, feed unit, manufacturer AMT, type WV400/160, year of manufacture 2008,control panel, control unit, manufacturer Rexrodt, separate switch cabinet system, additional transfer unit/material feed, vertical material buffer, 6-fold feed-through unit, oiling, manufacturer Ratiol/Stöber Find more here - / Contact us at -

Part Number: 7781 SPECIFICATIONS - Maximum milling height 216mm - Maximum milling depth 65mm - the largest cutter diameter is 250mm - spindle working length 500mm - spindle rotational speed 4600rpm - spindle diameter 40mm - max tool diameter 250mm - worktop length/width 890x400mm - 11kW motor - 2 material clamps – pneumatic - air demand 6-8 bar - diameter of the extraction port 160mm - dimensions l/w/h 1330x1200x1470mm - weight 970kg ADVANTAGES – Polish production – unpainted – used milling machine, very good condition Net price: 38900 PLN Net price: 9262 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Key data: 1050 mm, 560 mm, 460 mm

Table size 1300 x 560 mm Tool Stations 32 Control: Okuma OSP-P 20 M Serial Number: 155968 Year of manufacture: 2011, retrofitted 2022 Accessories: Chip conveyor 4th axis, 0-point clamping plate 1 hinged quill

Key data: 1050 mm, 560 mm, 460 mm

incl. Robojob Mill-Assist Manufacturer: Okuma Type: Genos M 560-V-e Travels: X: 1050 mm, Y: 560 mm, Z: 460 mm Table size 1300 x 560 mm Maximum table load: 900 kg Tool Stations 32 Control: Okuma OSP-P 300Ma-e (NC-controlled) Serial number: 0712-101084 Year of manufacture: 2018 Accessories: Chip conveyor High pressure pump 15 bar, Internal cooling pneum. Peeping tom loading door, Automation: Robojob Mill-Assist Essential Robot interface Length probe Renischaw

Applikon Pilot System 50L fermentation system Stainless, 50L pilot fermentation system

x-travel: 400 mm y-travel: 400 mm z-travel: 300 mm rapid traverse: 1,2 m/min feed range: 5 - 500 mm/min creep feed: 1:100 tool taper: ISO 40 stroke: v60 h70 mm table - universal: ca. 620 x 320 mm table vertical adjustable: 350 mm weight of the machine ca.: 1200 kg dimensions: mm Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 TUPESA rotary garment dyeing and washing machine type STONE 550, capacity up to 550 Kg (constructor indication and depending on articles) drum diameter 1950 mm x depth 1700 mm (volume 5000 L)

Single-station machine up to 8 ltr. Extruder S 90/20D. Single head with viewing strip. With leak tester and conveyor belts. Good condition

1 KAPPA pinking machine type 51N (Zigzag cutting), knife width 500 mm, power driven swatch and sample cutting machine, serrated knife with 4 mm serration gauge, year 2022, precise and accurate thanks to mechanical movement of the cutting board (turn wheel), exchange of knife is effortless and fast, motor 1,5 kW (2 HP)

A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

Stationary screw compressor with refrigeration dryer on 500 l container Specifications: Pressure 10 bar Volume flow 2000 l/min Voltage 400 V Drive power 15 kW Beh.-Vol. 500 l Weight 499 kg Noise 65 dB(A) Air outlet 3/4"i Dimensions (WxDxH) 1960x740x1725 mm Hint: ! without TÜV approval, container papers are not available