filler 5 l used for sale

Lippert belt conveyor GF 24500-650-500 RA1462 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 24.500 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail -Type: Profile 500 -Length: 125 mm -Dimensions: see photos -Quantity: 1x helmet rail available -Dimensions: 125/65/H60 mm -Weight: 0.7 kg

Centrifugal pump, acid pump, alkali pump, water pump for groundwater lowering pump -Centrigeminal pump: with stainless steel tank -Motor: 2.2 kW -Flow rate: 1900 l/min -Pumping height: 15 m -Tank capacity: approx. 500 liters -Overall dimensions: 1080/920/H1190 mm -Weight: 126 kg

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, steel rims, rims -Manufacturer: Mefro, 8-hole steel rim -Type: 6.50F-10 -Hub bore: Ø 190 mm -Bolt circle: Ø 210 x 12 mm -Quantity: 4x rims available -Price: per piece -Dimensions: Ø 300 x 200 mm -Weight: 10 kg

-Testing device for electrical equipment -each with isolation transformer -Number: 7 available -Price: per piece

Lippert belt conveyor GF 3220-650-500 RA1466 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3220 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 20 ...

geared motor, electric motor -Speed: 150 rpm -Power: 0.1 kW -Design: B3 -Shaft diameter: Ø 10 mm -Protection class: IP 65 -Weight: 4 kg

gear motor, electric motor -Speed: 750 rpm -Power: 0.8 kW -Design: B3 -Shaft diameter: Ø 25 mm -external fan -Protection class: IP 44 -Weight: 26 kg -Overall dimensions: 650 x 230 x H190 mm

geared motor, electric motor -Speed: 320 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 44 -External fan -Weight: 30 kg

Concrete bucket, concrete bomb, concrete silo -Concrete bomb: for concreting by crane -Contents: 500 liters -Crane slings -Dimensions: Ø 1100 x 1700 mm -Empty weight: 200 kg

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 500 liters Machine dimensions in cm: Length: 178 Width: 102 Height: 155 Electric power: 3 kW

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1000 liters Machine dimensions in cm: Length: 214 Width: 133 Height: 190 Electric power: 5 kW

Braumeister Micro Brewery System – 500 L The Braumeister is a fully automated brewing system designed for simplicity of operation, ease of cleaning, and reliable performance. It features a five-step automated control process that streamlines the brewing cycle and ensures consistent results. The 500-liter system is well suited for small commercial applications such as bars, cafés, and pilot breweries, as well as for highly experienced home brewers. The unit is supplied with integrated wheels and a hoist for ease of handling. It has a compact footprint, fully automated operation, and a jacketed vessel for efficient cooling. The system also includes a whirlpool function, making it a comprehensive solution for small-scale commercial brewing. Technical Characteristics Manufacturer Speidel GmbH Model Braumeister 500 Litre Manufacturing year 2016 Capacity approx. 500 l fin ...

We sell 500 x this package 1 x Huawei 5735-L12T4S-A Switch 12P (98010918) and 1 x Huawei S57XX-L Series Basic SW, per Dev (88035YSM) These are brand-new systems in unopened boxes, with original manufacturers warranty, EU systems In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya,  ...

Key data: 500 mm, 125 mm

Safe-Solid-Fast The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2 hand control - Protective shield rigid - 1 meter roller conveyor to the right of the saw, with galvanized rollers. Load capacity 230 kg, diameter 60 mm, distance 250 mm, Width 350 mm. Including rear 100 mm high stop ruler. - 1 meter roller conveyor to the left of the saw, with galvanized rollers. Load capacity 230 kg, diameter 60 mm, distance 250 mm, Width 350 mm. Including rear 100 mm high stop ruler with scale. - 1 piece of pneumatically swivelling stop with 200 mm Length and control switch on the saw frame - 1 piece HM saw blade 500 mm, Z = 108 Technical data: Maximum Cutting Range: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW  ...

Copilot system with touch-screen monitor Rounding and backing station 1st gluing station with viscosity control, book mark suction device 2nd gluing station Head and tail bending station Gauzing unit Kolbus BF 527 casing-in unit Kolbus FE 604 book forming and pressing machine Casing prestacking conveyor Gluing station with circulation and premelter Backlining and headbanding station pressing station with teflon band Case prestacking conveyor Case bending machine Case forming station Case magazine right hand infeed Kolbus DS 391 stacker Kolbus SU 651 Kolbus HD 142P three-knife-trimmer including all the cutting tables and knife changing unit Kolbus FS.A FS.L XMT 680

The steam boiler plant was put into operation in February 1992 and has been running smoothly for the entire service life since then. The steam boiler has a capacity of NW 7170 ltr and is operated with a maximum operating overpressure of 10 bar. It can run on oil and gas. The steam boiler was regularly serviced and inspected by the TÜV. The last TÜV inspection took place in 2018 without any complaints. The steam boiler has been filled with treated water since its decommissioning in 2019 and can be dismantled and transported away immediately. The closure took place due to a plant closure. The complete documentation is available in the original. Further information, including price, can be requested by calling 0345 6868-0 or infonovachem

Support rail for press brake, bending machine, guillotine shear, stop rail, clamping rail -Support rail: for profile steel shears, flat steel shears -Receptacles: Ø 42 mm -Hole spacing: 550 mm -Dimensions: 690/200/H290 mm -Weight: 10.1 kg

; Gross weight [kg]: 690

Surface Grinding Machine JONES & SHIPMAN 540 LAR, capacity 450x150 mm, magnetic plate. Automatic cycle, Max working dimensions: 450x170 mm, Longitudinal travel x axis: 470 mm, Cross travel y axis: 171 mm, Clearance between worktable and spindle axis: 502 mm, Feed rate x axis: 2-25 m/1, Feed rate y axes: 0 - 1 m/1, Wheel speed: 0 - 2640 rpm, Wheel dimension: 200x20x31,75 mm, Spindle motor power: 1,5 Kw, Weight: 1.000 Kg, Accessories: Magnetic plate, Auto cycle, Power rise and fall, DRO

Winding machine Lippelt Celba Multi Roll S-50N -Wrapping machine Lippelt -Type: S-50N - Condition see pictures

Intergas dosing unit DSD 500, type A, foaming unit and gas dosing station At the moment we have an intergas dosing unit for sale. This was a part of a project. Therefore the machine was used only very limited. - Operating hours: well below 100h - Weight: approx. 500kg Find more here - .ucymachines/

Used 500 l capacity stainless steel mixer. Two agitators: - slow rotary (frame) 30 rpm Mixer speed adjustable as required. - fast-rotating (propeller) 1380 rpm. Installation and control for circulating pump.

Offer 17500 Spot welding gun Technical data approx.: - Nominal power approx. 100 kVA - Projection approx. 350 mm - Arm spacing approx. 200 mm - Arm diameter approx. 50 mm - Double lifting cylinder type X - Z force at 10 bar approx. 2400 daN - Working stroke approx. 20 mm - Arm spacing approx. 200 mm - Separate control cabinet HARMS + WENDE - Total weight approx. 250 kg

Stock number: 3944 Suction Manufacturer: 3NINE LINA, Type: 500 Oilmist Separator Machines NO.: OLIETAAGE UDSUGER, Specifications: Fence effect 500 m3/hour m/3 Engine power 0.55 Kw Cleaning oil mist (cutting fluid/coolant) Min. / max Grad 5-50 degree C. Height: 840 mm, Width: Dia. 480 mm, Weight: 30 kg

Stock# U2443-4 Used stainless steel jet stream mixer by Ystral Gmbh (DE) type Y12.500L.LL/LDT-4DA GMP. Agitator is directly driven by el motor 12.5 / 3.5 kW, 1465/725 rpm, 400 V, 50 hz. Shaft has working length 1100 mm. Cage has internal diameter 245 mm. Three blade propeller has diameter 200 mm.

Technical data of the pallet rack crossbar: Shelving system: Nedcon Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Box profile: 130 x 50 mm Clasp: 7 HK (hooks) Clear width: 3,700 mm Max. load per pair of trusses 3,000 kg at the same weight. Distributed load 02x Locking pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 80 x 50 mm Truss Type: PNB0488 Agraffe: 4 HK (hooks) Clear width: 2,500 mm Max. load per pair of trusses 1,000 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Key data: 2550 KG, 39539 mm, 4130 mm

Technical data for the pallet racking system: Shelving system: Redirack Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 39,539 mm Number of fields per row of shelves: 12 pieces of 3,205 mm each Number of levels plus ground level: 02 pcs. The scope of delivery includes: 13x Pallet rack stand, used Material colour: light blue Frame profile: S Profile dimensions: C83x50x15x1.75 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (welded truss) 4,130 mm high 1,100 mm deep 48x Pallet rack beam, used Material colour: yellow Box profile: 120 x 50 mm Clear width: 3,205 mm Max. load per pair of trusses 2,550 kg, with the same weight. Distributed load 96x Safety Pin, Used Material colour: sendzimir galvanised For securing the longitudin ...

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 130 x 50 mm Truss Type: SLB Agraffe: 5 HK Clear width: 3,500 mm Max. load per pair of trusses 2,500 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

Diesel Fuel Tank 4.500 Liter, 4.500 Liter Tank, UL142 Certified

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss type: SLB 100|13 Agraffe: 5 HK Clear width: 2,800 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Size: 550 mm Equipments: Max. sheet width: 550 mm Max. speed: 10 m/min Max. film width: 500 mm Lamination: one-sided Pressure: mechanical, adjustable Material: from 135 g/qm2 Core diameter of foils: 76 mm:

Powder filling system for pre-made large bags/sacks with subsequent sealing and/or sewing of the bag/sack. The system includes product feed (screw conveyor), screw feeder with weight feedback, conveyor belts to feed to the heat sealing machine and to the sewing machine. The pre-made bags are manually clamped into the pneumatic clamp support by hand. The product is dosed and filled into the bag. Then it is manually guided by conveyor belt to the heat-sealing or sewing module and sealed or sewn. - Specifications auger filler: weight range: 10-50kg (when changing the dosing screw) | accuracy: +/-0,5% | max. speed of the machine in neutral: 8 cycles/min | capacity of storage hopper: 100L | power: 380V, 50Hz, 3kW | stainless steel version AISI 304 | machine dimensions: L1150xW1000xH2550mm | weight: 450kg. Specifications screw conveyor: Capacity depending on the product: up to 5m?/h | capacity ...

Fully automatic vertical system: automatic weighing, automatic bag feeding, bag opening, filling, shifting and output. Guiding into automatic bag sewing machine where it is sewed. Completely unmanned packaging process. Easy touch screen operation, quick format change. - Specifications: measuring range: 10-50kg | packaging material: hard plastic woven bags | max. speed of the machine in neutral: 12 cycles/minute | compressed air: 6bar, 0.6m? | machine weight: 1.600kg | power supply: 5kW, 380V. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Complete Large Vertical Filling System for premade bags. - Weighing range: 2.000 - 50.000g, max. speed of the machine in neutral: 16 cycles/minute. The system includes product elevator, automatic weighing machine, belt conveyor and bag sealding OR sewing machine. - For granule products like seed, pet food, etc.. The premade bags are clamped manually into the pneumatic clamping device. The product will be dosed by weighing and filled into the bag. By using the belt conveyor the filled bag will be passed to the sealing or sewing machine. - Platform- and In-/Outfeed-dimensions can be customized: Technical Specifications do depend on the final layout/construction of the complete system. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel fre ...