137,365 used machines on RESALE, but how to find them? Machine Search
Part: Keyboard type LX57C Repair Service Reparatur Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
turning diameter: 750 mm turning length: 1520 mm control: Fanuc 18 iT-B total power requirement: 22,0 kW weight of the machine ca.: 15,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool radius: 10 mm -Thickness: 20mm -Total length: 471 mm -Total height: 188 mm -Recording width: 80 mm -Weight: 19.8 kg
Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Transfer in current condition as seen -1x: punching bracket as shown in the pictures -Manufacturer: CEWE -1x: type LWS 35-150 -Dimensions: 300/80/H220 mm -Weight: 13 kg
Bending tool, die, upper blade, upper tool, straightening tool -Handover in its current condition as inspected -Tool for: Press brake -Tool: 88° -Thickness: 25 mm -Total length: 1009 mm -Lengths: 879/130 mm -Total height: 162 mm -Weight: 26 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool: 82° -Thickness: 25 mm -Edge length: 1039 mm -Total height: 162 mm -Weight: 26 kg
Key data: 5 , 300 mm, 200 mm
Spindle arrangement: scoring saw at the bottom - planing shaft at the bottom - top - right - left Diameter of spindles: 40-X-X-50-50 Spindle Speed: 5400 Counter bearings: 2-3 Jointer: 2-3 Engine powers: 15-45-55-22-18,5 Adjustment of the working width: digital Adjustment of the working height: digital Feed speed : 50 - 200 Feed motor: 45 KW Feed: Cardan Horizontal tool head D205 Vertical tool head D160xH100 Z12 Table height constant approx. 1000mm Diameter of suction nozzles 200-250-160-160-120 Weight 13000 kg
Key data: 1300 mm, 5
Wide belt snding machine Manufacturer: Heesmann Model: LSM 8 Equipment: - Transverse sanding unit - Longitudinal sanding unit - Longitudinal sanding unit - Brush unit - Brush unit
Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Reel for: crane chassis -Drawing with the photos -Chain length: 3600 mm -Quantity: 1x reel available -Price: per piece -Dimensions: 710/250/H220 mm -Weight: 19 kg
adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.18 kW -Speed range: 81-485 rpm -Motor: adjustable -Drive shaft: Ø 14 mm -Construction: B3 -Number: 1 piece of motors available -Price: per piece -Dimensions: 365/200/H190 mm -Weight: 19 kg
Used centrifuge made by Alfa Laval type BRPX 213 SGP-34. The machine has a control cabinet with a touch panel, a set of keys and technical documentation.
Technical data for the shelving rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of fields / row of shelves: 01 pcs. á 1,290 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 02x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts The stands are pre-assembled 1,200 mm high 610 mm deep 04x Shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at evenly distributed load: 120 kg 04x Compensating plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 04x Rack trusses, used Total length: 1,275 mm Z-profile: 50 x 25 mm N ...
Three-phase motor, electric motor -Power: 9.5 kW -Speed: 1440 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 730/430/H375 mm -Weight: 163 kg
Technical data for the shelving rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 2,630 mm Number of fields / row of shelves: 02 pcs á 1,290 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 03x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts The stands are pre-assembled 1,200 mm high 610 mm deep 08x Shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at evenly distributed load: 120 kg 06x Compensating plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 08x Rack trusses, used Total length: 1,275 mm Z-profile: 50 x 25 mm Nu ...
Connector, plug, sensor module, G2 flat module -Manufacturer: Lumberg -Type: 0976 PFC 101 -Number: 10x plugs available -Price: per piece -Weight: 0.06 kg
Technical data for the shelving rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 6,500 mm Number of fields / row of shelves: 05 pcs á 1,290 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 06x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts The stands are pre-assembled 1,200 mm high 610 mm deep 20x shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at evenly distributed load: 120 kg 12x compensating plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 20x shelving trusses, used Total length: 1,275 mm Z-profile: 50 x 25 mm ...
SPECIFICATIONS: Cold press Working table mm: 2500 x 1300 No. 4 pistons Vertical stroke: 450 mm
Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool: 88° -Edge length: 100 mm -Overall height: 149 mm -Weight: 3 kg
Capacity: 1 200 T, Total stroke: 500 mm, Stroke of main crank shaft: 318 mm, Stroke of mobile die: 215 mm, Stroke/min: 27, Bar diameter: 50-90 (150) mm, Max diameter of peace: 152mm, Max weight of piece: 5 kg, Main motor power: 75 KW, Area of machine : 6400 x 4420 mm, Hight of machine: 3830 mm, Weight: 128.0 T
Geared motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 109 rpm -Shaft: Ø 25 mm -Design: B3 angle -Protection class: IP 55 -Quantity: 1x motor available -Dimensions: 490/230/H170 mm -Weight: 22.6 kg
Electric motor, three-phase motor -Power: 6.8 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: EX -Number: 3x available -Price: per piece -Dimensions: 470/360/H300 mm -Weight: 75 kg
USED SIG CFA 406 FILLING LINE FOR SALE Item #: Usm-184 Category Sig Combibloc We have SIG Combibloc 2L machine CFA 406 Filling Line For Sale: CFA 406 filler, year 2004, working hours 33411 Sterile air system- 2004 Evacuation table- 2004 Buffer table- 2004 Closures Applicator- Combiswift type of closures- 2002 Tray packer- 2004 Conveyers
Servo motor, electric motor, DC motor, stepper motor, stepper motor -Max. speed: 3000 rpm -Torque: 1.9 Nm -Power: 0.6 kW -Shaft: Ø 19 mm -Design: B5 -with NIKKI-DENSO-Encoder-E2-1-2000-PR -Number: 5x stepper motors available -Price: per piece -Dimensions: 290/120/H180 mm -Weight: 11.4 kg
Electric motor, three-phase motor -Motor: unused -Power: 18 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 640/390/H360 mm -Weight: 110 kg
Lippert Rising falling Incline belt conveyor GF 7000-900-800 RA2055 Technical data: Conveyor length (NL): 7000 mm (4960 mm + 700 mm + 1340 mm) frame width (NB): 900 mm belt width (GuB): 800 mm Overall height (BH): 120 mm, 430 mm with motor Angle: about 15° ( 2 x 7,5° ) Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 7000 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine ...
electric motor, three-phase motor -Engine: is unused -Power: 55 kW -Speed: 2950 rpm -Shaft: Ø 60 mm -Design: B3/B5 -Protection class: IP 54 -Dimensions: 860/680/H550 mm -Weight: 366 kg
Three-phase motor, electric motor, geared motor -Power: 3kW -Speed: 950 rpm -Shaft: Ø 28 mm -Construction: B3 -Number: 1x available -Dimensions: 460/260/H335 mm -Weight: 42.8 kg
Sensor module, G2 flat module -Manufacturer: Lumberg -Type: ASBS 8/LED 5-4 -Number: 3x available -Price: per piece -Weight: 0.26 kg
Lippert belt conveyor GF 3150-900-700 RA2113 Technical data: Conveyor length (NL): 3150 mm frame width (NB): 900 mm belt width (GuB): 700 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3150 Nominal / outside width in mm: 900 Belt width in mm: 700 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / ...
Servo drive, servo converter, output module, card, input processor, power supply unit, control card, input card, controller -Manufacturer: Lenze -Type: 9114 B -ART.-No.: 331073 -Servo drive -Number: 2x control cards available -Price: per piece -Dimensions: 350/120/H300 mm -Weight: 6 kg
Gear motor, electric motor -Speed: 75 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 12 mm -Protection class: IP 65 -Dimensions: 250/160/H120 mm -Weight: 4.75 kg
Filter control valve, switch-on valve, maintenance unit, water separator -Connection: 1/4 -Number: 5 pieces available -Price: per piece -Dimensions: 80/80/H190 mm -Weight: 0.7 kg
Gear motor, electric motor -Speed: 194 rpm -Power: 0.75 kW -Construction: B3 -Diameter hollow shaft: Ø 24 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 430/150/H200 mm -Weight: 15 kg
Gear motor, electric motor -Speed: 35 rpm -Power: 0.75 kW -Construction: B3/5 -Diameter shaft: Ø 40 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 660/235/H280 mm -Weight: 66 kg
Electric motor, three-phase motor with 2 speeds -Power: 1.6/5.5 kW -Speed: 1445/2880 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: -pole changing -Number: 1x available -Price: per piece -Dimensions: 410/350/H300 mm -Weight: 48 kg
Double bench grinder, bench grinder, column grinder, column grinder, Cut-off machine, polishing machine, polishing stand -Motor power: 0.45 kW -Speed: 2,800 rpm -Max. Grinding wheels: Ø 150 x 20 x Ø 32 mm -Operating voltage: 400 volts -Dimensions: 650/700/H1500 mm -Weight: 198 kg
Three-phase motor, electric motor with 2 speeds -Power: 1.25/4.2 kW -Speed: 970/1460 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -pole changing -Dimensions: 440/350/H265 mm -Weight: 62 kg
Pressure control valve, pressure control directional control valves -Manufacturer: Festo -Type: MS4-LRB-1/4-D6-A8-AS -Operating pressure: 0-10 bar -Number: 1x valves available -Price: per piece -Dimensions: 130/60/H40 mm -Weight: 0.22 kg
Lippert belt conveyor GF 780-650-500 RA1397 Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 780 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): with frequency converter free adjustable Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.07 / 0.37 S1 Drive drum (AT): Ø = 64 mm Deflection roller (UR): Ø = 34 mm Belt: Type SNB 5 E Year of construction: 2001 Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 ...
Electric motor, three-phase motor -Power: 15 kW -Speed: 1430 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: - -Dimensions: 650/450/H360 mm -Weight: 158 kg
Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg
Three-phase motor, electric motor -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 670/400/H320 mm -Weight: 108 kg
Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: -Speeds: 3000, 4500, 6000, 9000 rpm -Dimensions: 1400/800/H1480 mm -Weight: 600 kg
Three-phase motor, electric motor -Power: 45 kW -Speed: 2965 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: - -Dimensions: 810/550/H440 mm -Weight: 340 kg
Three-phase motor with 2 speeds, electric motor -Power: 1.7/7 kW -Speed: 720/1450 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: - -Dimensions: 480/330/H270 mm -Weight: 74 kg
GRP barrel, storage container, storage container, silo system, tank, fertilizer storage silo -Material: GRP -Storage silo: 750 liters -on: stand -Mannhole -Dimensions: 1650/920/H900 mm -Weight: 130 kg
Gear motor electric motor -Speed: 200 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 32 mm -Protection class: -Price: per piece -Number: 2x available -Weight: 38 kg
MIG/MAG hose package, -Hose package: for robots, welding device -Length: 3 m -Euro plug -Water cooled -Weight: 3.7 kg -Price: per piece -Number: 1x available -Weight: 4 kg
Electric motor, three-phase motor -Power: 0.12 kW -Speed: 1375 rpm -Shaft: Ø 11 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 4x available -Dimensions: 210/122/H190 mm -Weight: 4.25 kg
maximum number of results exceeded
please refine your search
