filler 5 l used for sale

Manufacturer: Siemens Card , Type: GE.548229.0001.00, Model: 548 229 9001, Serial Number: 3823,

Hersteller : Simenskarte, Type: 6 ES 5921-3WB13, Control: Siemens, Serial number: 548.226.7102,

Manufacturer: Weeke, Type: BHX 500, Year: 2007, Work piece width min-max mm: 70 - 1.000, Work piece length min-max mm: 200 - 2.500, Work piece thickness min-max mm: 4 - 80, Working range X: 2.500, Working range Y-axis: 1.000, Working range Z: 80, Vertical drilling station from below: 32, Vertical drilling station from above: 32, Drilling supports horizontal: 2, Horizontal drills-X: 2 x 8, Drill horizontal Y: 2 x 2, Number of spindles: 1.500 - 7.500, Number of spindles: 1.500 - 7.500, Year :2007

; Gross weight [kg]: 4355; Engine: Baudouin 6M21G550/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 740

Manufacturer: Celaschi, Type: TSA 520, Year: 1987, Maschinensteuerung: max. 290, Motore Maschine 1: 150, Magazine: 150, Schrumpftunnel: 2x3, Min.-max. workpiece height in mm: 5,5, Working hight min-max mm: 5,5, Cam distance mm: 5,5, Year :1987

Manufacturer: Wagner, Type: Finisch 500, Year: ca.2005, Wasserbasierend Lacke: yes, 2K-Lacke möglich: yes, Elektr. pump: yes, Laquer reservoir litres: ca.10 Liter, Flushing circuit: yes, Movable: yes, Spray gun manufacturer: Wagner, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 1, Laquer system - airless: yes, Electrical power consumption kW: 2,8, Transmission ratio: 250 bar, Conveying output l/min: 5,7, Delivered checked: yes, Wight approx. kg: 52, FREE TEXT: 220 Volt/2,8 Kw/Gewicht 52 Kilo/zusätzliche Schläuche/2 Stück Sprühlanzen/ , Year :ca.2005

Manufacturer: 2 StückPerske, Type: Ritzmotor Homag FPL 526, Motor with gear: KNS 51.14-2 D, From machine: Homag Maschine, Spindle length mm: ca.60, Diameter of the spindle mm: 30, Power kW: 1,0/2,0, Volt/Hz: 50-60-120, pm: 2750/5700/3380/6920, Motor with gear: KNS 51.14-2 D, Price per unit Euro: 600, FREE TEXT: Spindeldurchmesser 30/Länge mm ca. 55 mm,

Manufacturer: Felder, Type: MG 580-1, Year: 2012, Control: yes, Min-max edge material mm: 0,4-5, Work piece width min-max mm: min. 70, Min.-max. workpiece length in mm: min. 140, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 11, Premilling: yes, Mitre stations: yes, Weight approx. kg: 990, Year :2012

This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a table size of 1200 x 540 mm and impressive travels of 1020 mm in the X-axis, 540 mm in the Y-axis, and 510 mm in the Z-axis. The machine is equipped with a 30-position automatic tool changer and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 500 vertical machining centre we have for sale. Contact us for further details.

This 5-axis Mazak VARIAXIS500-5XII was manufactured in 2006. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 60 positions. The machine has an impressive X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS500-5XII vertical machining centre we have for sale. Contact us for further details.

Carpet carousel 5000 mm Carousel rack for carpet and flooring rolls Robust and fully functional carpet paternoster (carousel shelf). The system is ideal for space-saving, vertical storage and display of carpets, PVC rolls or other heavy roller goods. Length approx. 5000 mm Capacity: approx. 12–16 support rods / roller places The carpet and floor coverings for the respective carousel rack can be purchased extra for €1000 net. Item location: Frankfurt am Main Period: The collection must take place at the end of September to the beginning of October. Option 1 (self-collection): Dismantling and removal are carried out independently by the buyer. Option 2 (all-round carefree package): We are happy to offer you professional dismantling by us, including delivery throughout Germany, for a flat rate of €1,000 net (plus VAT). "Everything from a singl ...

Mains connection: 3P + PE, operating voltage: 400V, frequency: 50/60Hz, control voltage: 24V DC, connected load: 3.5kVA, rated current: 4.8A, total current: 4.8A, upstream fuse: 3×16A. The machine is in perfect condition. An on-site inspection is possible.

Manufacturer: MBusch, Type: MB LA 500, Year: ca.1997, Working widht mm: 600, Working hight mm: 80, Workstations: 4, Glue jets: 4, Schlitz und Zapfenbeleimung: yes, Pneumatical work piece clamping: yes, Fusspedal Takt: yes, Wasseranschluss zum reinigen: yes, Leimpumpe: yes, Movable: yes, Automatical glue supply: yes, Compressed air bar: 6, Year :ca.1997

Stroke 25, TS 250°C, DN 40

Suvamatic Jointer safeguard/ surface planer safeguard 340 to 515 mm working width

4-Spindle Paper Drilling Machine Ideal 504

Folding machine MB multipli-cas 524 Folding machine MB multipli-cas 524 Serial-No. 78261

5-axis machining center Mori Seiki NHX 5000 Year of construction 2011 (bought new in 2013) Hours10768 Processing time 7172 hours Electricity one hour 29288 With few operating hours, used only for single part to small series production, mainly for special mechanical engineering The specifications are as follows: Travels: Cylinder Ø 500 x 700 Control M730BM (Mapps2) Speed 10,0000 rpm. Tool holder SK40 DIN 69871 Tool changer 60-fold Pallet changer 2-fold Accessories: Documentation Internal cooling Knoll 50 bar Conveyor Activation to 400 tool positions Pine pallet with long zero point clamping system Lang tensioning tower approx. 100 pieces of tool holders SK40 An on-site inspection is possible at any time by appointment.

High-pressure pump for baler HSM 500.1 VL with 7.5 kW motor

Mecalux roller conveyorRoller conveyor 1950-540-450 RA1927 Make: Mecalux Roller width (RB): 450 mm, Steel rolls Nominal/outer width (NB): 540 mm length: 1950 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 Electric data: 24V ITOH-Deki condition: very good (used) Conveying length in mm: 1950 Nominal / outside width in mm: 540 Roll width in mm: 450 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e- ...

Key data: 1500 KW, 1490 1/min

Siemens 1.5MW DC Motor with Watercooler incl. Simovert Masterdrive (Watercooled) Description attached

Plotter HP 5000 Serial-No. SG17D1402P

A pad printing machine from Teca Print is being sold. The machine is available 3x. Price per machine. The machine can and should be viewed and tried out on site, as warranty or guarantee is excluded. Price is net Loading facilities available All information without guarantee.

Key data: 5000 kN, 80 mm

KM 500/2700C2 Specifications Closing page: Clamping force: 5000 kN Wooden dimension h x v: 900 x 800 mm Min. installation height: 480 mm Plate spacing max.: 1650 mm Centering: 200 mm Tool weight: 7900 kg Splash Side: Screw diameter: 80 mm Capacity: 1433 cc Spray pressure: 1829 bar Equipment: MC 4 Control Core moves: 2+2

This 3-axis MORI SEIKI NV 5000 alpha1 was manufactured in 2008. It features an X-axis travel of 1020 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine has a weight of 7300 kg and includes a central spindle cooling unit, along with a Blum laser tool measurement system. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NV 5000 alpha1 vertical machining centre we have for sale. Contact us for further details.

dishwasher for dishes, Electrolux ELE 506065 type EPPWEASMS, 400 V, 13.5 kW BJ 2018, basket size 50×50 cm, automatic lowering and raising of the hood, 3 washing programs and 1 x continuous washing, self-cleaning cycle, digital display, electrical preparation for automatic washing Washing-up liquid – rinse aid dispenser, original price €17286.00 Dimensions 83x89x176 cm, minus 35% discount

Double sided edgebander manufactured in 2004. This HOMAG OPTIMAT KFR 526/10/A3/35 features a robust design suitable for various applications. It operates at a voltage of 400 V and has a load capacity of 250 A. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG OPTIMAT KFR 526/10/A3/35 machine we have for sale. Contact us for further details.

; Gross weight [kg]: 5230; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775

CONTROLS   PLC OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 4 mm   coil weight max.: 10.5 to   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 10.5 to   stroke: 750 mm DECOILER   design: single reel   sheet width max.: 500 mm   sheet width (min): 150 mm   coil weight max.: 10.5 to   max. diameter of coil: 2020 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 20 m/min CROP SHEAR   sheet thickness max.: 4 mm   working width max.: 530 mm   stroke rate (max.): 20 /min LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 150 mm   sheet thickness max.: 4 mm   sheet thickness min.: 2 mm   number of leveller rolls: 9   diameter of leveller rolls: 56 mm   diameter of feed rolls: 150 mm   feed velocity max.: 20 m ...

Heber conveyor belt GF 34500-600-500 RA2241 Technical data: Conveyor length (NL): 34500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, RF63DT90L4 Electrical data: 50Hz V380-500, kW 1,5 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 34500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralan ...

Technical data of the pallet rack stand: Shelving system: Arestant Type: AS The scope of delivery includes: 01x Pallet rack stand, used Material color: blue Profile dimensions: 80 x 77 x 1.8 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) Height: 4,500 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Dematic roller curve right 90°-600-540 IR830 RA2351 Make: Dematic Direction of rotation: 90° clockwise Insertion width/roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 830 mm, 900 mm to plastic coating Height frame: 140 mm Height including motor: 240 mm Electrical data: 3x 300-500V Gear motor: SEW Conveyor speed: 0.7 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 830 Nominal / outside width in mm: 600 Roll width in mm: 540/450 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or ...

pressure: 28 t distance between columns: 510 mm dayligth: 380 mm stroke: 260 mm weight of the machine ca.: ca. 750 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single Needle Double Lockstitch Flatbed Machine

KSB Submersible Motor Pump with Water-Filled Motor Manufacturer: KSB Item number: 110 321 Type: BRZS 535 /1a Motor Type: 12 A 923 Operating voltage: 380/660 V Rated current: 191/111 A 92 kW Speed: 450 1/min Q: 250 m³/h H: 26 m IP: 58 Year of manufacture: unknown Length: approx. 2750 mm The pumps are unused stock goods and are delivered in the original KSB wooden freight crate. More pumps - new and used - can be found in our shop! International shipping costs on request!

Power cable, extension cable, CEE extension cable -Extension cable: Length 17 m -Plug: CEE plug 63 A 5-pin -Voltage: 200/346 V to 240/415 V (3-phase) -Transport dimensions: 700/600/H200 mm -Weight: 20 kg

This 5-axis Makino A51-5XR HMC was manufactured in 2013. It features a generous travel of 22 x 22 x 23.6 and is equipped with a 60-tool automatic changer and a spindle speed of 14,000 RPM. If you are looking to get high-quality machining capabilities, consider the Makino A51-5XR horizontal machining centre we have for sale. Contact us for further details.

Compressed air-cleaned dust filter with stainless steel housing, filter area: 10 m², filter media: 4 filter cartridges, incl. ESM-3 control unit and manifold for flange mounting on the underside. Filter was used for dedusting a horizontal mixer for mineral building materials.

Key data: 400 KW, 500 kVA, 400 V

The largest model in Electroquell's range. The 500 kVA (400 kW) generator with a Ricardo motor is suitable for shopping malls, industrial plants and large investments. Ricardo Motor ComAp IL-NT AMF25 controller Brushless alternator Weatherproof housing Drip pan Possibility of continuous operation 24 hours a day Power: 500 kVA / 400 kW Voltage: 400 V Current: approx. 722 A Fuel: Diesel EN 590 Additional options: ATS system, remote communication, cooler for 55 degrees Warranty: up to 60 months

Technical data: Printing Section 5 × UV Flexo Printing Units 5 × UV Dryers Web Inspection BST PowerScope 300 – Web Inspection System Unwinder Max roll diameter: 1250 mm Heavy-duty construction with pneumatic shaft and web tension control Integrated splice table and web guiding system Rewinder Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turnbar (Web Inversion Unit) Allows reverse-side printing or lamination — flexible for multi-layer label applications Remailing Section 24" Supports reprocessing or secondary processing of pre-printed materials Additional Modules Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) Cross Cutting Cylinder (inline sheeting or perforation — precise longitudinal  ...

Original Heidelberg Zylinder manual, 0ver 60 years old in almost mint condition. No missing pages, not dirty a true rare find to addf to the missing serial equipment of your machine.

Reference ID PP-61507 Category 5-Colors Manufacturer Komori Model LS 540+L Year Built 2010 Color - Impression - Working Hours - Speed 16000 sheets/h Max. size 720 × 1,030 mm Min. size 360 × 520 mm Condition Good Location Europe Availability Immediately Description 5 colors and varnish 1. CONTROL AND AUTOMATION PQC-S central control console with remote register, ink and dampening adjustment KMS-IV management system with job memory, production planning, production monitoring, fault and maintenance information KHS makeready system Semi-APC semi-automatic plate changing system Remote plate cylinder cocking adjustment Automatic sheet-size, substrate-thickness and impression-pressure presetting Automatic feed-board brush and wheel presetting Feeder side-blower presetting Remote sucker-head height adjustment PC, keyboard and printer excluded from the KMS-I ...

Diesel fuel station, diesel tank, gas station, fuel tank system, fuel tank, gasoline tank -Diesel tank: Fuel tank, universally applicable -Overall dimensions: 530/335/H370 mm -Empty weight: 2.9 kg

CNC punching machine manufactured in 1995. This TRUMPF Trumatic 500 features a maximum punching force of 220 kN, accommodating workpieces up to 150 kg. It offers a working range of 2500 mm along the X-axis and 1250 mm along the Y-axis, allowing for efficient processing of various sheet sizes. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 500 machine we have for sale. Contact us for further details regarding this machine.

Hydraulic injection moulding machine manufactured in 2018. This ENGEL duo 5160/700 features a clamping force of 7000 kN and platen dimensions of 1510 x 1440 mm. The machine includes a screw diameter of 80 mm and a shot volume of 2061 cm³. If you are looking to get high-quality injection moulding capabilities, consider the ENGEL duo 5160/700 machine we have for sale. Contact us for further details.