filler 5 l used for sale

mobile heating system, central heating system, steam heating used STEAG / LOOS Boiler capacity: steam 3.2 t/h Boiler manufacturer: LOOS Boiler type: UHD 3200 Temp. max 190°C Pressure max 13 bar Boiler capacity 2650 l Burner WALKER D112/140-2 7.0 kW Heat and soundproofed container 9.2 x 3.6 x 3.6 m Transport weight: approx. 25t Operating weight approx. 30 t Electrical power requirement 25 kW Changes and errors in the technical data, information and prices as well as prior sale reserved.

Both filling stations are in good condition, little in use.

Key data: 61 , 75

Origin Engine 9.1 L: 90 kW mechanical power gas supply: natural, LNG, biogas or wood gas liquid-cooled exhaust manifolds single coil per cylinder ignition system crankcase venting motor coupled to generator Generator Linz: active power - 75 kVA turnovers - 1500 1/min

For sale is a commercial kitchen with 4 pieces of Schneider cooking kettles in V2A double-walled heated with (24KW) with a 400 liters (together 1600 liters!) and an extraction system. as well as various accessories. such as e.g. Sandwich glass board etc. New price was just under 100,000€. It has been proven that the facility was used very little. Plant immediately available from site (lead time approx. 2 weeks for dismantling and delivery) For sale is a commercial kitchen with four double-walled, 24kW Schneider stainless steel cooking kettles, each with a 400-liter capacity (1600 liters total!), and an extraction system. Also included are various accessories such as a sandwich glass worktop, etc. The original price was nearly €100,000. The system has demonstrably seen very little use. The system is available immediately from the site (lead time approx. 2 weeks for dismantling and  ...

Rolls Royce Bergen B32:40 L6P engines for sale in our stock in Istanbul Turkey Bergen B32:40 L6P complete engine with turbo charger In our stock in Istanbul 3 pieces available year: 2002 3000 kw 750 RPM in good condition please contact : info@fin-marine.com

Web edge control for films Type: Ultrasonic Edge Sensor FX 5060 No. 226142 24V supply voltage, current consumption 170 ma Interface CAN - Profibus DI-B000-157905M Actuator AG 5791 / AG5891 Edge Sensor FX5060

Very little used !

machine measurements: 9.657 x 1.472 x 1.985 mm machine weight: -- kg power capacity: -- kW Condition: used - as good as new Specification: FFP 2 N95 mask system complete Consisting of: - see sketches in the plant - cycle time approx.: 35 - 50 pieces/min - not CE certified - Space requirement approx.: 9,657 x 1,472 x 1,985 mm - Completely assembled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plug-in valve, R900929935, LC50A40E7X/, Rexroth, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - Comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Plug-in valve, R900929935, LC50A40E7X, Rexroth, as good as new, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian ...

USED PRECISION GEARS LTD TR-100 BLISTER BACKAGING MACHINE REF.: E0034 PRECISION GEARS LTD blistering machine to blister tablets, capsules, dragees, etc. For PVC / Aluminum blister Model TR-100 Year 2000 Batch marker for incision, pre-cut, cut, Production of 50/60 strokes per minute, depending on the selected blister size, up to 240 blisters per minute. Maximum format size 190x130 mm. Current format blister of 10 capsules of 170x 100 mm General characteristics: Manufactured by PRECISION GEARS LTD Model TR-100 Year built 2000

Refrigerator, showcase of a gas station, plus cooling area as well as deep-freeze area, including shelves Plus refrigerator consists of 4 doors, shelves, evaporator, aggregate. Minus refrigerator, consists of two turns with heating, shelves, aggregate, evaporator

Fortuna + Lippelt Bread Roll System Compact Fortuna Primus K4 Head Machine 4- Rows Weight range: 35 - 80 grams Volumetric lobe diameter: 64 with hardening plate Hourly output max.  5000 / piece Front + Rear + Roller Flourer 2x working speed (slow + fast) Siemens Simatic Touch Panel Control Rev. 2010 Machine volume max. 70dB Weight head machine: 600kg Lippelt fermentation cabinet Type: G 8000 L/R Year of construction 2014 Operable from 4 to 6 rows (depending on the head machine) Number of hours per head machine from 5000 - 8000 pieces with punching station for round and long rolled dough pieces  4x punching with cutting device punch Cutting strength adjustable with stamp station with direct setting on 58x78cm & 58x98cm sheets with settling tape Special fermentation carriers without mould accumulation Siemens Touch Panel Color Screen incl. accessories on  ...

Universum Winding Machine Type: LWT -3 - EB 2-40 with transport work table wood Long castors and flat castors Stainless steel cladding 380 V 50Hz on rolls Dimensions universe: Height: 170cm Width: 170cm Depth: 80cm Dimensions table Height: 85cm Width: 200cm Depth: 100cm

Linear weighing and mixing machine, for mixing four different products - ideal for e.g. seeds, tea, muesli, nuts, pasta, sugar, salt, rice, general granular, granular products. The rotary version has a longer vibration path, which allows the particles to be better separated from each other, thus reducing the risk of jams. SPECIFICATIONS 2-HEAD SCALE: - 4 weighing heads each 0.5 litres, max. 300g/head - Weighing container capacity: 500 ml - Hopper: 8 l - Weight range: 5-300g - Accuracy: +/- 1.5-5g - Max. machine cycle rate at idle: 70 cycles/minute - Electricity: 220V, 1.2kW - Machine dimensions: L1028xW1078xH825mm -Condition: Year of construction 2024, but UNUSED AMTEC PLATF-SML - Frame/platform/rack for 4-head weighing systems - Feet and casters included - Frame dimensions: H 2660 x W 1350 x D 1000 m FOOT SWITCH: To open the weighing head during semi-automati ...

Power: 5000 kVA / 4000 kW Year of construction: 12/1992 Current: 275 A Voltage: 10.5 KV Frequency: 50 Hz Rotation: 1500 rpm Weight: Approx. 13.6 to. Protection class: IP 23 In 2017/2018, the following work was carried out: Stand winding in insulation class F completely renewed Inductor finely balanced and refurbished at nominal speed Reman refurbished plain bearings Other parts overhauled Tested and test run 2019 Prior sale reserved - errors possible

Kemper Long Knitter - L analog control with flour spreader Spreader adjustable Speed treadmill adjustable Height of the bands adjustable with CE plug for linking to bread system No separate power connection required on rolls Metrics: Height: 170cm Width: 200cm Depth: 90cm

Langguth V 81 Bucket Destapler,Destapler for unpalpping buckets Bucket size from 2.5 - 20 l automatic handle alignment Very good condition, directly from production!

This mixer is used but has been cleaned and tested This HL662-1STD is ideal for commercial kitchens thanks to its 60 qt. bowl, stainless steel bowl guard, and dough hook. With an ergonomic design and superior functionality, you can make repeat recipes consistently and create new ones with ease and efficiency. This unit requires a 200/240V electrical connection for operation. Ergonomic Swing-Out Bowl Featuring an ergonomic swing-out bowl, this mixer makes it easy to load and unload ingredients. With a single point bowl installation, you can easy mount or remove the bowl as needed. Plus, the bowl interlock ensures that the mixer bowl is properly in place before the mixer will operate for added safety. Dough Hook This mixer comes with a (1) "ED" dough hook so you can mix up to 90 lb. of dough at once. The 2.7hp motor, gear transmission, and safety mechanism system provide plenty  ...

Hydrovar + motor without pump, HV3.3 f/120c + LM100RBM14/330, Lowara, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law app ...

Qty.1 Second-hand deep drawing press Mfc.: LVD Co. Type: EMF-TWI- 200SP Built: 1982 Stopped production in 2002 Tested in 2012 In operation condition! Max. pressure: 200 T (2000 kN) Max. oil pressure: 300 bar Max. hydr. stroke: 2300 mm Max. distance table – ram: 4500 mm Motor power: 250 HP (187 kW) Table & ram dim.: dia. 300 mm Closing speed: 160/80 mm/sec. Working speed: 3507175 mm/sec. Cushion Max. capacity: 2 x 1000 kN Max. oil pressure: 300 bar Max. hydr. stroke: 2000 mm Table dim.: 1800 x 1800 mm Motor power: 75 HP (56 kW) Plate holder Plate holder dim.: 250 mm Plate holder stroke: 1000 mm Motor power: 25 HP (19 kW), 3 x220 V Weight: 75 Ton Pumps Main pump: 3 x A7V355LV 1RPFHO Pilot pump: Vickers V210-5-1A-10-5214 Tank Volume: 3350 L

RECON Part Number: 305781B Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Features Volume 10380 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 6500 mm Height 5500 mm Diameter width 1500 mm Surface inside 2B=IIIC ground Surface marbled on the outside Weight 1000 kg Description Topsoil: Clapper bottom 2 crane eyes Threaded weld-on nozzle central DN 100 to DN 40 with threaded nozzle DN 50 with airlock valve DN 50 and check valve DN 50 Sprinkler ring Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 420x320 mm Sample tap DN 15 1 ladder hook at the top Dip shank sleeve for temperature display Downward-swept CIP cable with DN 40 vent line with DN 50 connection thread Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn floor bead with angled seat valve DN 50, flush with the tank wall forward-d ...

Stainless steel centrifugal pump manufactured by LINX. S-30 model.

Rotary piston vacuum pump manufactured by Leybold . E150 model. With an oil capacity of 5.4 L and a noise level: 76 dBA

Used- Alfa Laval BRPX-417-SFV-31CGL-50 Desludger Disc Centrifuge. 316 Stainless steel (product contact areas), maximum bowl speed 4180 rpm, clarifier design (liquid/solids separation), centripetal pump liquid discharge, sludge cyclone, belt drive configuration, drive motor

Totally reconditioned vertical Alfa laval MAB206S centrifuge with stainless steel bowl, use for mineral oil, manual centrifuge for the expulsion of solids. +/- 10,000 l/h (Hydraulic) Engine 7.5 Kw 220/380 V 1430 Rpm.

M. No: 32781 Size: 300 x 560 mm Speed: 44.000 c/h

CONVEYOR STATION LORANDI / OLI / SIPA 30/15

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Siemens Simatic OP17 controller Screw Ø: 2x 75 mm L/D: 36:1 Motor: 143 kW (DC)

Manufacturer: Fujifilm Model:Acuity LED 1600 Year of Manufacture: 2016 Certifications: -  ETL Intertek 3080219 - CE marked Conforms to UL STD 60950-1 - Certified to CAN/CSA STD C22.2 No.60950-1 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...

Cutter Kilia 200 liter Express, surface, bowl lid and bowl stainless steel, noise protection lid, loading, ejector, knife shaft brake, knife shaft speed 2-touring

Meat grinder Laska WW 130-1G, 130 mm angle grinder, 1-touring wolf in frozen meat version, stainless steel version, load for 200 liters standard car, ergonomic operation, enlarged funnel with 295 liters

Massey Ferguson 1014

Manufacturer:Fujifilm Model: Acuity LED 1600 Year of Manufacture: 2017 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Meat grinder Laska WW 130-2, 130 mm angle grinder, 2-touring wolf, stainless steel version, load for 200 liters standard car, ergonomic operation, enlarged funnel with 295 liters

Laska Mixer Type ME 250 Vacuum Z Arm Mixer Kneader Filling quantity approx. 180 KG

Laska Mixer ME 250 VAC Capacity 180 Kg Mixing System Z Arm Kneader Mixer

; Gross weight [kg]: 2000; Inspection Date: 2026-06-10; Lift height[mm]: 1600; Maximum lift capacity [kg]: 200

Cutter Laska model KU 65 AC, bowl capacity 65 liters, microprocessor control, probe plate with membrane keypad and plain text display, infinitely adjustable knife shaft 35-4,900 rpm, two bowl speeds, mixing gear backwards infinitely variable, electric knife shaft brake, 6-knife head, 3-knife head optionally available for an extra charge, engine power 23 kW, operating voltage 3 x 400 VAC / 50 Hz