filler 5 l used for sale

Motor centering flange, motor flange, pump flange, motor centering bell, clutch bell, bellhousing for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 75 mm -Large recess: Ø 115 mm -Dimensions: Ø 180/H41 mm -Weight: 0.5 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 550 mm -Length extended: 1085 mm -Width: 16 mm/height: 61 mm -Price: per pair (left right) -Weight: 2.7 kg

Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Refer to code 1024 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

1250 x 2500mm with SheetMaster loading/unloading - Lots of tooling

Refer to code 1026 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 300 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 425/45/H45 mm -Weight: 1.7 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Dimension: Ø 27 x 192 mm -Weight: 0.25 kg

Refer to code 1032 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 150 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 6 pieces -Dimension: Ø 36 x 300 mm -Weight: 0.95 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 320 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 3 pieces -Dimensions: 462/28/H28 mm -Weight: 0.7 kg/piece

Demolition hammer, chisel hammer, Bosch hammer, caulking hammer -Length: 570 mm -Price/Sale: complete -Quantity: 2 pieces -Dimensions: 570/21/H21 mm -Weight: 2.6 kg

8 Color Stack UV Flexo Printing Machine Overhauled 2020 with installation IST MBS 7 UV system in 2020. Substrates: OPP,BOPP,PET,PVC,OPS,paper,aluminium foil. Print width max 560 mm, Material width max 580 mm 8 flexo printing units Speed 200 m/min, Camera (E+L) Register control (E + L

Electric motor, three-phase motor -Power: 0.35/0.5 kW -Speed: 660/1325 rpm -Shaft: Ø 24 x 50 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 330/199/H230 mm -Weight: 10.3 kg

Precision Deburring Faceting Milling Machine / Edge Milling Machine Specifications: Steel – stainless steel – aluminium – plastic – machining Deburring and faceting process is carried out with milling cutter Support angle - facet angle tiltable Facet angle adjustment 15 to 45 ° Facet width infinitely adjustable 0 to 7 mm Length of guide strip 500 mm Speed 2750 rpm Drive 400 V / 0.7 kW Space requirement approx. W 650 x D 600 x H 950 mm Weight approx. 30 kg

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Span width: approx. 500 mm -Clamping depth: approx. 200 mm -Dimensions: 650/290/H40 mm -Weight: 5.7 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 60 mm -Transport roller width: 590 mm -Admission: M8 -Pin: Ø 20 x 28 mm M8 -Price: per piece -Number: 7 pieces -Dimensions: Ø 60 x approx. 620 mm -Weight: 2.1 kg/piece

Hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 18 mm -Flange: Ø 50 mm -universally applicable: -Number: 1x motors available -Price: per piece -Dimensions: Ø 130/248 mm -Weight: 14.7 kg/piece

Hydraulic pump, oil pump, gear pump -Shaft mount: Ø 14 mm -Quantity: 1 piece available -Dimensions: Ø 115/190 mm -Weight: 3.7kg

Hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 15 mm -Flange: Ø 50 mm -universally applicable: -Number: 1x motors available -Price: per piece -Dimensions: Ø 125/230 mm -Weight: 11.7 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 60 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 3 pieces -Dimensions: 192/27/H27 mm -Weight: 0.15 kg/piece

Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General Information SKU: 193 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 434 g Clamping force: 2,000 kN Screw diameter: 55 mm Spray pressure: 1650 bar Tie bar spacing: 520x520 mm Clamping plate size: 728x728 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Funnel: No Core train: Yes Euromap: Yes

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Piston diameter: 32 mm -Piston rod: 12 mm -End position cushioning: adjustable on both sides -Price: per piece -Number: 4 pieces -Dimension: Ø 38/218 mm -Weight: 0.55 kg/piece

Transformer station with precast concrete building L = 5.50m, B = 3.00m, H = 1.00m + 2.70m - Three-phase cast resin transformer - Low-voltage distributors - Undermeasurement - Mains protection component

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 60 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 3 pieces -Dimensions: 202/27/H27 mm -Weight: 0.25 kg/piece

PLC control, machine control, module -Make number: 2529 and 2530 -Serial number: 109-998-4201b-2 -Dimensions: 190/130/H20 mm -Number: 2x available -Price: per piece -Weight: 200 g

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 200 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 345/47/H47 mm -Weight: 1.0 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 45 x 433 mm -Weight: 1.3 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 65 mm -Piston diameter: 125 mm -Piston rod: 32 mm -Price: per piece -Number: 2 pieces -Dimensions: 345/144/H144 mm -Weight: 9.3 kg/piece

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 80 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 230/49/H49 mm -Weight: 0.85 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 75 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 4 pieces -Dimensions: 205/45/H45 mm -Weight: 0.95 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 5 pieces -Dimensions: 412/54/H54 mm -Weight: 1.60 kg/piece

BVM Compacta 5015 incl. tunnel Built in 2000 In stock and ready for immediate use

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Stroke: 25 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 3 pieces -Dimensions: 75/64/H64 mm -Weight: 0.55 kg/piece

Horizon Cross Folder Model AFC-504AKT Machine is in stock and is immediately available

Demolition hammer, chisel hammer, Bosch hammer, mortising hammer -Length: 500 mm -Dimensions: Ø 25 x 500 mm -Weight: 1.5 kg

Demolition hammer, chisel hammer, Bosch hammer, mortising hammer -Length: 525 mm -Dimensions: Ø 42 x 525 mm -Weight: 2 kg

Emulsion mixer Volume : 500 ltr. Material : areas in contact with the product in stainless steel;

Demolition hammer, chisel hammer, Bosch hammer, mortising hammer -Length: 265 mm -Price: per piece -Number: 2 pieces -Dimensions: Ø 28 x 265 mm -Weight: 0.8 kg/piece

Fully automatic high-performance binding machine Rilecart B 599 for brochures with wire comb binding from the manufacturer Rilecart, Italy.

BOWL CUTTER, TVALL TYPE: CRI-50AC Technical description: Serial number: 9.089.403 Speeds: 2 Bowl capacity: 50 Lt Power supply: 380-440V/50-60 Hz Dimensions: 1300 x 1000 x 1350 mm

cascade separator, vibrating chute, vibrating conveyor, vibrating chute, vibrating chute used Manufacturer: KARL MERZ AUFBEREITUNGSTECHNIK Type: ULA 570/50-650 built: 1987 Gutter approx. 500 x 1000 mm 2 vibrators each 0.84 kW Overall dimensions approx. 1300 x 1300 x 1400 mm e.g. For the separation of granules with shape defects, e.g. angel hair, double granules This cleaner was used for plastic granules. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 175 mm -Plate thickness: 26 mm -with: support ribs -Weight: 90 kg

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Air filter housing -for: filter donaldson XLP 18 2046 -Inlet/outlet: Ø 150/149 mm -Price: per piece -Number: 1 piece -Dimension: Ø 355/595 mm -Weight: 12.35 kg

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Speed control unit GAC-ESD5550 3 pieces available, 1x with original packaging, 2x without

Speed control unit GAC-ESD5131 1 piece(s) available, with original packaging