filler 5 l used for sale

1 factory-tested single angle crane in design with laterally movable carrier trolley Load approx. 5,000 kg Span approximately 33,000 mm Hook way max. 9000 mm Make AUMUND/steel Year of production/workshop test 1981/2016 with steel angle trolley for maximum hook path, DEMAG Kranfahran- drove, corridor control freely movable Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear 10.0/40.0 m / min Crane chassis up to 60.0 m / min

1 factory-tested double girder overhead travelling crane Load approx. 6,300 kg Wingspan approx. 14,000 mm Hook path Max 10.000 mm Make steel Workshop examination 2016 Crane equipped with steel double girder trolley, corridor control working speeds: Hoist approx. 0.8/10.0 m / min Trolley gear approx. 14.0 m / min Crane chassis 10.0/40.0 m / min

Freestanding distillery – 350 liter capacity Equipment: - Heating: by steam (against extra charge combustion chamber with water bath) - Steam jacket / water bath 4 mm stainless steel - Copper bubble Ø 900 mm, semi-conical - Filling DN 350 cast brass - Medium column / special fine burner with 3 trays - And attached tube end phlegmator and Kotzbecken - Incl. 4 sight glasses - Outlet ball valve DN 100 - Connecting piece agitator - Special tube cooler made of stainless steel including brandy - Spirit tubes stainless steel Basic price distillery, filling volume 350 liter: 32.620,00 € Additional equipment: Combustion chamber for solid fuels 48 kW made of 8 mm steel, incl. Smoke gas heat exchanger 8-pipe system 2.750,00 € Insulation water bath / steam bath made of stainless steel with 30 mm rockwool 1.760,00 € 4 connectio ...

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min

1 of used swing-top bottling line. Originally used for filling beer (2°C) in 330 ml printed/sleeved glass bottles (D 60 mm x H 230 mm) with swing-top closures, at a speed of ± 1.900 bph. Additional size-parts included for 500, 750 und 1.000 ml bottles. Last used for bottling liquors. Wired for 415V/50Hz. Line hardly used and hence in excellent condition! Line consists of:Bottle feed table with 5 rows of stainless steel slat, stainless frame, with inliner and variable speed drive, new 2006. 1 lot interconnecting empty- and full bottle conveyors, stainless steel slat and frame, new 2006. 1 rinser/filler monobloc, make Cime Careddu (Italy), type DPS 9-8, new 2006, 9-head rotary rinser, no-bottle/no-spray, 8-head rotary counter-pressure filler with double pre-vac (built-in vacuum pump), height adjustable min/max 180 – 350 mm, diameter min/max 50 – 90 mm, CIP to drain, with Telemecaniq ...

Lefort BR1260 Shredder for sale. The machine has 10 hammers, 500 Hp electric engine. The machine has a low hours (less than 2.500). THe machine's capacity is around 20-25 tons/hours which means this is an exelent machine. Price is including the separation and conveyor system to, which is including the followings. -Feeding conveyor (1260 mm wide) -Vibrating table -magnet drum (type:BMK 100-180TML ) -1 conveyor for metal scrap with cabin for separation -1 big conveyor for nonferrous and other materials Bbmc3fzwrj -1 magnet belt -1 magnet separation system ( separating the non-ferrous metals from the dust) that system is including a vibrating table, and electric box (type:EC-X650 ) -2 conveyors from non-ferrous metal and for dust. VERY IMPORTANT: Every part of the system and every function works. +Option: We can help you in the diassembling, assembling and in the transport ...

1 factory-tested, very well-preserved single-girder crane Load trolley CA 10,000 kg Lifting capacity crane approx. 20,000 kg Wingspan approx. 39,500 mm hook path approximately 15,000 m Make helper / ABUS Year of production / workshop testing 2012/2016 Crane equipped with floor control as emergency steering, ABUS monorail trolley, radio control Working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear infinitely variable approx. 1.0 20.0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested, absolutely Mint double girder crane as crane trolley with 2 elevators, particularly suitable for traverse operation Load approx. 2 x 6,300 = 12,600 kg Span 14,950 mm hook path about 6,000 mm Make steel Year of production/workshop inspection 2002/2016 Crane equipped with Swivel trolley, maintenance stage, split head support for optimal wheel load distribution, radio control working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear about 2.5/10.0 m / min Crane chassis up to approx. 40.0 m / min

1 factory-tested, well preserved steel double girder overhead travelling crane Load approx. 16,000 kg Track width approx. 13,500 mm hook path approximately 3,600 mm Katz gauge approximately 4,200 mm Year of production / workshop test 1990/2016 Crane equipped with double girder trolley and steel drive units suitable for traverse operation, radio control, catwalk and overload protection Working speeds: Hoist CA. 0.6/4.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 4.0/16.0 m / min

Capacity 20.000 kg Wingspan approx. 9,450 mm Hook way approx. 23,000 mm Make HEIMANN/SWF Year of production/workshop review 2006/2016 Crane radio control equipped with SWF double girder trolley, Working speeds: Hoist approximately 0.67/4.0 m / min Katz LG 5.0/20,0 m / min Crane chassis up to 30.0 m / min

4 factory-tested, very well preserved double girder cranes Load approx. 20.000 kg Wingspan approx. 16.650 mm Hook path about 5.000 mm Fabrikat MAN/SWF Year of production/workshop test 1995/2016 Cranes equipped with SWF double girder trolleys with reduced design to minimize the installation height, freely movable floor control Working speeds: Hoist approximately 0.32/3.2 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Frey F-Line F50 vacuum stuffer, vacuum filling machine for filling, portioning, linking, CAN control, filling capacity up to 2.200 kg/h, filling pressure up to 30 bar. You are very welcome to test the machine in our facility in Koblenz, Germany.

Laska KU 65 cutter, bowl capacity 65 liters, microprocessor control, membrane keyboard, stepless speed control, 4 freely programmable fixed speeds, mixing gear forward and backward continuously, 6 knife head, electric knife shaft brake, noise protection cover. The cutter can be tested in 56070 Koblenz.

General overhault Exchange engine DEUTZ/Lombardini F4M1008F/LDW1404 without starter, alternator, incl. Fuel-injection-system MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany Tel:0049(0)4281-950583 Fax:0049(0)4281-950585 info@miw-zeven.de MIW-Zeven

Exchange engine overhauled without starters, alternators, incl.fuel injection-system Lombardini LDW1404/Deutz F4M1008F MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring8 D-27404 Zeven Tel:0049(0)4281-950583 Fax:0049(0)4281-950585 miw-zeven.de info@miw-Zeven.de

Complete Line Consisting of 1.Sheet material unwind station (let off stand) 2. Iddon 1320mm x 450mm dia wide 4 roll inverted L calender manual nip adjustment, even speed gears, auto lubrication system with 45kW AC right angle drive motor and gearbox, Steam heated bowls up to 150c Bowl temperature monitoring system, fabricated bedplate. Overhauled in 2007 (by Iddon) with new side frame and rolls precision ground 3. Edge Trim - make: Mario Cotta 4. Guillotine - Make: Pasquato SNC 5. Wind up

2,700 m2 storage platform Shepherd R3000 2-storey used goods, top condition, as good as new, see pictures Manufacturer SCHÄFER R3000 CAD planning and assembly Price on request! Partial sale possible Negotiation price: on request! Goods are in stock and available promptly Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers. (Changes and errors in the technical data, information and prices as well as intermediate sale reserved! See our terms and conditions, all prices excl. VAT from stock) Purchase /sale We are looking for or offer continuously numerous items from various areas Besenris-clean company clearances Operational dissolutions Quick- flexible -quick-witted! We also clear and dispose of or dispose of mass m ...

4,000 m2 storage platform Shepherd R3000 2-storey used goods, top condition, as good as new, see pictures Manufacturer SCHÄFER R3000 CAD planning and assembly Price on request! Partial sale possible Negotiation price: on request! Goods are in stock and available promptly Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers. (Changes and errors in the technical data, information and prices as well as intermediate sale reserved! See our terms and conditions, all prices excl. VAT from stock) Purchase /sale We are looking for or offer continuously numerous items from various areas Besenris-clean company clearances Operational dissolutions Quick- flexible -quick-witted! We also clear and dispose of or dispose of mass m ...

Kilia Supreme Cut 200 ltr., 200 liters bowl cutter, bowl and bowl-cover stainless steel, year of manufacture 2011, hydraulic noise reduction cover, knife shaft brake electrically operated, separate stainless steel electric control cabinet, membrane keyboard, variable bowl speed, variable knife speed, variable mixing speed forwards and reverse, cleaning system, knife head with 6 knifes, hydraulic loading device for 200 liter bins, hydraulic unloader. You are very welcome to inspect and test the machine.

Painting facility Königsmoos: Make : Wolf Built: 1989 Dimensions: 3.8 m x 6.9 m x 3.0 m (approx. WxLxH) Supply air ceiling : Filter ceiling Lamps: 2 x 4 pcs. recessed luminaires with 4 x 58 W each Entrance side: 2-wing gate 2.35 m x 2.85 m (approx. WxH), glazed Escape door: 2 pieces, 0.6 m x 2.0 m (approx. WxH) Rusting : the existing rusting remains on site - we can offer alternatives Heating unit: 209 kW, oil burner Energy saving: Speed control with frequency inverter Dry temperature: 80 degrees C Supply air unit: 22,500 m3/h; 7.5 kW Exhaust air unit: 22,000 m3/h; 7.5 kW Pipelines : Supply and exhaust pipes, deflector hood, etc. Electrical: Control cabinet Location : Ingolstadt Area

Fuel tank - fuel tank - steel tank - tanks - used oil tank - tank system gas station - home station - storage tank - storage containers - farm service station - steel tanks 50.000 litres content - according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The tank is painted exterior green - no repainting. L = approx. 10.70 m / D = 2.50 m / weight CA. 9,0 tons. / free charged ex works.

Make : LUTRO Type : Special plant BU EI S Built: 1990 Dimensions: 4.8 m x 7.0 m x 3.9 m (approx. WxLxH), total height 5.5 m Supply air ceiling : Filter ceiling Lamps: 2x4 pcs. Recessed luminaires, 4x58 W + 2x3 wall recessed luminaires on the side Entrance side : Roller door 4.0 m x 3.9 m (approx. WxH) Exit side : Roller door 4.0 m x 3.9 m (approx. BxH) Escape door: 2 pieces, 0.6 m x 2.1 m (approx. WxH) Grating : Full-surface grating, 80 pcs. 690x560 mm, support rod 560x50x3 mm Heating unit: 291 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,000 m3/h Exhaust air unit: 22,000 m3/h Pipelines : Supply and exhaust pipes, deflector hood, etc. Electrical: Control cabinet Location : Stuttgart area Sell price: € 14,500,- net from location, without disassembly

3 liter laboratory mixer -Container V2A -Container to remove -Drive 1 motor frequency controlled

Creo Lotem 800 II Quantum 830 nm, Thermal Manufacturer: Creo Model: Lotem 800 Year: 2006 8 page format Plate size min.: 381 x 318 mm Plate size max.: 1050 x 705 mm V speed: 22-25 plates/hour Resolution: up to 3556 dpi Approximate number of plates produced: 109950 Bacher Control 2000 Punch Installed on IBM Server Excellent condition Koadak Mercury 125 PlateProcessor/Stacker

Creo Lotem 400, year 2005 830 nm fully automatic thermal imaging plate setter model: Lotem 400 quantum head 4 page format 3 cassette MCU Minimum plate size: 381 x 318 mm Max plate size: 750 x 622 mm F speed: 16 plates/hour resolution: up to 2540 dpi approximate number of plates produced: 100950 Bacher control 2000 punch Excellent condition

Creo Lotem 400, year 2004 Model: Lotem 400 fiber head 4 page format, Manuel Loading Minimum plate size: 381 x 318 mm Max plate size: 750 x 622 mm F speed: 18 plates/hour resolution: up to 3556 dpi approximate number of plates produced: 107000 With HQ level 3 RIP version 7 installed on PC

Electronic water dosing device with temperature display Your advantages: fast and exact input of the water quantity Clear control panel with large, bright display compact and flour dust-proof stainless steel housing easy connection to an ice water system with Automatic Wiedehol Technical data Dosing volume range: 0.1 l - 999.9 l Temperature accuracy: display only Dosing accuracy from 1 l: +/- 0.1 l Water flow at 3 bar: up to 30 ltr./min Water connection: 3/4" external thread Power connection: 100 - 240V ; 50hz Dimensions W x H x D: 200 x 300 x 130 mm Visit our Milbrandt Outlet with many bakery machines and appliances!

Digital airbrush painting system for direct printing on all materials Type: NV3. 1 Vehicle type Robo Pressure range 2000 x 3100 mm working with spraying head with 4 nozzles and the primary colors cyan, magenta, Yello, black for 16.7 million colors Year 2001/2002 2 x used from training centre New price 120.000,-€ Nozzles must be repaired if necessary on youtube there are some video BB´s

Laska W 130-1 automatic grinder, 130 mm, hopper capacity 42 Liters, control via push buttons. You are very welcome to test the machine in our facility in Koblenz, Germany.

Pumping station for external system cooling, specifically for LEYBOLD sputtering systems H 3200 the sputtering is one other offer on ebay offered and is not included in this offer the facility had not made it to production, is as good as new

Sieve Drum Waste Waste Product Drum Sieve Machine Screening System 2.24 m Diameter 7.5 Kw Stainless Steel Enclosure used Manufacturer: Lohse Total length: approx. 6337 mm Drum diameter: 2240 mm Height: approx. 4807 mm Plant width: approx. 3400 mm Sorting screen plate 1st zone: 8x60 mm Sorting screen plate 2nd zone: 6x40 mm Operating weight (filled): approx. 11000 kg Empty weight complete: approx. 9500 kg Drum housing is made of stainless steel, screen basket iron Motor data - drum drive Three-phase motor type R93DV 132M4 Power: 7.5 kW Engine speed: 1430 rpm Drive speed: 25 rpm Speed drum: 10 rpm Connection: 230/400 V Rated current: 16 A Frequency: 50 Hz Protection: IP54 Design: B3 The sieve drum has already been dismantled and cleaned. Item location 01587 Riesa, visit possible.

Wire stitching machine VEB LEIPZIG P 66 Built in 1972 Machine No.: 66.72.126 1 staple head Functional The machine can be demonstrated in our warehouse - please make an appointment. Wire Stitching Machine VEB LEIPZIG P 66 1972 In 1972 Serial: 66.72.126 1 stitching head working condition Test is possible in our stock – just make an appointment. ••••••••••• The machine is available in the warehouse and can be tested. Test in our stock is possible. The machine can be visited in the warehouse. Can be visited in our stock. Only to commercial buyers with proof. Purchase only available for commercial customers with proof Sale without warranty and warranty. No return accepted. The machine is sold as it goes and stands. We sell the machine "as is", no warrenty, no guaranty. We don't take the goods back.  ...

MAN D 2066 LF 12 - Euro 4-287 KW - 390 HP Motor was cpl. repaired according to RAL GZ-797: with new piston rings, new bearings, new oil pump, AT cam shaft, AT injectors, new water pump, oil and fuel filters 1 year warranty without KM-limit Old Engine must be returned

MAN D 2066 LF 31 - Euro 4-324 KW - 440 HP Motor was cpl. repaired according to RAL GZ-797: with new cylinder liners, Pistons, bearings, turbochargers, air compressor, injectors, high pressure pump - without starter, alternator and clutch Repair enabled old part must be returned. Maximum mortgage of old part of 4.000,00 = €

Motor was sealed front and rear new - upgraded oil pump, thermostat, oil filter, fuel - engine was installed on engine test bench and a cpl. Test run was carried out 6 months warranty on the motor mechanism Mileage only 200,000 km old part pledge 4,500.00 = €

MAN D 2876 LF 13 - Euro 4-390 KW - 530 HP Motor was cpl. repaired according to RAL GZ-797: with new pistons and liners, new bearings, new oil pump, AT cam shaft, AT injectors, new water pump, oil and fuel filters 1 year warranty without KM-limit Bauglieches old part must be returned

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

RECON Part number: AA302180A ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

RECON ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

RECON Part number: A308023 LB ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

RECON Part number: A308123 RB ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

; ready for operation

RECON Part number: A308002C -Natural Gas -Complete Please note: Picture shows the bare cylinder head. After order it will be reconditioned ---------------------------------------------------------------------- ------- We also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

52,000 litres KZE tanks/storage tanks/ sterile tanks 4 pieces UNI-BAR B. No. 19-091 A-D GL Dimensions: Diameter approx. 3,175 mm Zyl. Height approx. 5,750 mm Total height with feet approx. 7,570 mm Material: V4A, WSt. 1.4571 Containers with curved floors Wall thicknesses: underbody 5 mm, sheath 4/3/2.5 mm, upper floor 3 mm Topsoil: 1 threaded nozzle DN 80 with removable spray head, with pulled-down line NW 40 1 Venting nozzle NW 80 Cylinder: 1 manhole 350 x 450 mm swivel 1 stand display valve with scale strip and plexiglass tube 1 threaded nozzle for clear drain NW 40 1 1/2 for tasting tap 1 slanted seat flange DN 350 for agitator - without agitator - Underbody: 1 outlet pipe pulled forward DN 65 Otherwise according to sketch and photo