filler 38 used for sale

We sell 2 x Dell/EMC Unity 380 systems, 2 x Dell/EMC Vplex systems in total with these disks: 34 x 1.8TB disks 6 x 400GB SSDs In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have ava ...

Laminator 380 Plus • Automatic feeder with suction head • Inlet stacker • Automatic sheet separator • Film trimming device (includes cutting and trimming blade) • Chrome plated rolling roll •Touch screen • Anti-bend system • Fans for cooling after the grille • Stamping system included used foil rewinder • Hydraulic rolling roller pressure Specifications: Maximum film reel size: 0.75 x 4000 m Film thickness: 23 – 42 μm Film mandrel shaft: Ø75 mm Maximum film reel diameter: Ø340 mm Material Weight: Digital printing paper: 135 – 350 g/m² Other paper: 157 – 350 g/m² Maximum format: 390 x 520 mm Minimum format: 200 x 300 mm Maximum speed: Up to 15 m/min Top rolling roll diameter: Ø120 mm (chrome plated and polished) Lower rolling roll diameter: Ø80 mm (silicone) Accuracy: ±2mm Power: 3200 W Electrical voltage: 200-240VAC – 5 ...

This Krauss-Maffei 160-380 CX Injection moulding machine was manufactured in the year 2016 in Germany. It is equipped with a clamping force of 1600 kN, a SP 380 injection unit with a screw diameter of 35 mm. Shot weight for PS is at 140g.

; Gross weight [kg]: 3800; Engine: Iveco CR13TE2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 550

Pressure: 10 bar Motor: 2,2 kW Free air delivery: 0,248 m³/min Measurement (WxHxD): 1010 x 730 x 360 Weight: 52 kg

Cutting range round: 340mm, cutting range square: 340mm/380mm, feed length: 600mm, multiple feed: 1800mm, belt speed: 20 - 130m/min. Cutting speed infinitely variable. Material support height: 600mm (roller conveyor height). Documentation available. On-site inspection is possible.

There are three identical machines available, screw diameter: 70mm, operational hours counter machine 1/ 2/ 3: 65,000/ 60,000/ 46,345h, year of construction machine 1/ 2/ 3: 2007/ 2008/ 2012, for each machine there is one Handling Robot Wittmann W731 available.

Number of colours: 6, with paternoster feeder, operational hours counter: 33,213h.

There are four WABÄMA PICCOLO 380.10 available, year of construction: 2005, 2008, 2009, 2010.

Max. final pressure: 7.5bar, connected load: 75kW, with Refrigeration Dryer Atlas Copco FD 380, max. working pressure: 20bar, one identical compressor is available as a sopurce of spare parts, max. operating pressure: 20bar.

There are two identical machines available, rotational speed: 12.5/min, cylinder weight: 14.7t, length: 6890mm, with documentation, an inspection is possible.

Max. roll diameter: 1250mm, max. speed: 100m/min, weight: 2.9t.

Description ROTARY TABLE DIAMETER 1500mm MAXIMUM MOLD DIMENSION 400X400mm

Article: Brushless Servomotor Manufacturer: Bosch Type: SD-B5.380.020-00.000 e.g. to use as feed motor for Schutte multispindle automatic lathe SF51Dnt Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: Brushless Servomotor Manufacturer: Bosch Type: SD-B5.380.020-00.000 e.g. to use as feed motor for Schutte multispindle automatic lathe SF51Dnt Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

14A/87 - 27A/92V

Unused

Unused

Unused

used PLC control, functional, ex stock

-Intermittent flow wrapping machine in stainless steel design. -Servo drive in the cross-sealing station for ideal and reproducible bag qualities. -Separately controlled drives for high flexibility with different packaging formats. -Year of construction: 2016 -Refurbished in 2022 -Condition: as good as new Specifications: -Package length: 80-550 mm (1000 mm with double extractor) -Package width: 80-350 mm -Film roll width: 730 mm maximum -Film roll diameter: 350 mm / 40 kg maximum -Roller core diameter: 60-80 mm -Film material: all common hot or cold sealable films and composite films -Production capacity cycles/min: 60 purely mechanical

DC TIG shielding gas - welding system Sweat strom_ 40 - 360 Amp. Incl. cooling system, ESS type: KG 1, good hose package, fitting, various new 2 mm needles, various new ceramic nozzles and rolling chassis. Power supply: 380 Volt, 32 Amp. Weight: approx. 120 kg. Freely loaded from stock. Good operational condition. Without bottle. The system can be inspected and tested under electricity and is immediately available. Shipping with forwarding agency possible by arrangement. Please also note my other entries.

VSA 38 L Feeder Feeder VSA 38 L 3 feed rollers Roll diameter 120mm Roll width 60mm 8 speeds (2/4/5.5/6.7/11/12/15/30 m/min) Motor 750W 400V 50Hz 2-stage gearbox Weight 85kg G&STÜ-5114500

turning length: 1000 mm turning diameter: 380 mm turning dia. in gap: 490 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1920 x 800 x 1660 mm Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according ...

Aluminum Double Miter Saw Fabr. ELUMATEC Type DG 79Year of construction 1982Saw blade diameter: 380 mmSaw blade hole: 32 mmCutting length: 4500 mmSwivel range R + L: 15 ° 22.5 ° 30 ° 45 °Angle: 0 - 45 °Section range: sh. sectional diagramCompressed air connection: 7 barSaw blade speed: 3800 rpm.smallest cutting length: 500 mmDrive power: 2 x 3000 WWeight approx: 490 kgwithout controlused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC double miter saw make RAPID type DGLYear of construction 1990Technical specifications:Saw blade diameter: 380 mmSection length: 4800 mmcan be swiveled up to: 45 °Saw blade speed: 2800 rpm.max.cutting height: 210 mmDrive power: 2 x 2.2 kW eachWeight approx: 700 kgExternal dimensions approx .: 1250 x 5850 x 1200 mmwith- CNC Control- pneumatic clamping cylinderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Slotted tiller manufacturer ROTOX type FWS 386Fabr. -No: 386166, built in 1989for simultaneous milling of 2 offset slots in aluminum profiles1 milling motor: 0.6 KW2 wheel motors: 0.5 KWWeight: 200 kgSpeed: 17200 rpmWith- Cooling lubricationused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Water slot cutter Fabr. ROTOX Type FWS 386Fabr. -No: 3866160, year of construction 1993for simultaneous milling of 2 offset slots in aluminum profiles1 milling motor: 0.6 KW2 wheel motors: 0.5 KWWeight approx.: 200 kgSpeed: 17200 rpm.With- Cooling lubricationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Coolling capacity: 450 kW (15/10 — 35°C) Year of manufacture: 2004 Type of refrigerant: R134a Refrigerant circuit: 2 pcs. Compressors: 2 pcs. Bitzer (screw) Options: Freecooling Hydraulic module: 1 pc. pump, expansion vessel Number of fans: 12 pcs. Dimensions: 9.00 x 2.25 x 2.30 m Condition: very good

Test force: 250 kg checking height: 0-270 mm kind of tests:: Rockwell workpiece depth: 160 mm weight of the machine ca.: 88 kg dimensions of the machine ca.: 200 x 500 x 800 mm This hardness tester Frank 532 comes from a training company and has been maintained more than second hand. The general condition is according to the age, very good, all functions have been checked. - Table with manual adjustment - with precision dial indicator for direct reading The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mm saw band length: 3320 mm table height: -- mm : 330 mm : 40 / 80 m/min : 3440 x 27 x 0,9 mm : 280 mm : 260 mm : 380 x 260 mm : li 260 mm : li 250 mm : li 300 x 200 mm : re 200 mm : re 180 mm : re 230 x 160 mm : 180 mm : 170 mm : 200 x 170 mm : 870 mm : 1,5/1,8 kW : 0,7 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control modes: -Manual mode -Semi-automatic-dynamic operation (the semi-automatic cut is started by manually approaching the saw bow from any position by actuating the hand switch) -Semi-automatic operation (start / stop position of the saw bow is programmed via the keyboard, vice closes / opens automatically, saw bow is automatically returned to the start of the cut) Features: -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large  ...

Available in stock 3 x Used Azcue HFO Booster Pumps model BT-HM 38D2. Equipment is used but in good working conditions. Height: 50 m Flowrate: 3.5 m3/h

capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 250 mm capacity 90 degrees: flat: 380x250 mm : 260 mm : 250 mm : 300x200 mm : 180 mm : 170 mm : 200x170 mm : 240 mm : 210 mm : 280x160 mm dimensions of saw-band: 3770x27x0,9 mm : 385 mm speed: 40/80 m/min total power requirement: 1,5/1,8 kW weight: 695 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HEPU Pump Brand: HEPU Type: BK 150-380 Drive: 30 kW electric motor

rated capacity: 2,6/2,8 KW frequency: 50 Hz output voltage: 2 x 230AC / 1 x 12DC V tank capacity: 15 l weight of the machine ca.: 48 Kg dimensions of the machine ca.: 700 x 500 x 600 mm A quiet, powerful and reliable 3200 W generator. - Mobile thanks to two smooth-running wheels. - Durable and energy-efficient 4-stroke engine with eco function. - Ideal for traveling with a camper, caravan or tent. - Equipped with LED display, 230V and 12V DC output. - Automatic protection against overload and lack of fuel. - Only 35 kilograms (!). Easy to transport and store. - Noise level: very quiet, only 59 dB (A) at a distance of 7 m. - Fuel: Euro unleaded The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer you a submersible pump from KSB. - Model AMAREX KRT K 300-381/406 XG-S - Year of construction: 2004 - Total mass 935kg - Volume flow: 1152 m3/h - Power: 40kw - Speed: 980 1/min - Temperature: up to 40 degrees Celsius Areas of application: Waste water in industry and environmental technology If you have any further questions, please feel free to contact us or visit us Errors and information Errors excepted! No guarantee or warranty. Prior sale and errors excepted. GTC Trade & Service Inh. M. Schönau Halbmondsweg 3 99885 Ohrdruf, Germany

Jenacher diesel emergency generator with a MAN 2842 LE diesel engine and a Hitzinger Synchronous generator . Complete with switch box and heat extraction from Jenbacher with 235 kW from the exhaust heat

Main spindle control, RAC 2.3-250-380-A-00-W1, Indramat Bosch Rexroth, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The high quality part comes from a spare parts stock of a mechanical processing of a large automotive manufacturer. The main spindle control was repaired by Bosch Rexroth. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of construction: 1990 Machine no.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outdoor clearing Pulling force: 25.000kg Cutting speed: 7.2 / 8.1 / 9.6m/min Maximum tool length: 3520mm Passage width: 520mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12.300 x 6.400 x 4650mm Power Supply: 380V 50Hz/110kW Accessories/ Special equipment: - 6 tool carriers for tool change - Machine documentation Remark / General The machines are in good condition. The machines are dismantled with us in the Bearing. The total volume of the plant comprises several trucks (approx. 70 tons per machine). The machines have produced connecting rods for passenger car diesel engines. Chain scrapers are designed for use in mass production. The continuous ( ...

M. No.: 79750864 Format (mm): Width max. 370 mm, min. 100 mm Length max. 630 mm, min. 100 mm Pockets: 2 Folding arts : Letter fold, zigzag fold, double parallel, single fold Equipment / Additional information: Compressor

Multipli with pheumatic bow feeder , compresser, double sheet control , 2 pockets

Key data: 120

Extruder 1 spindle for manufacture of pellets. 120 mm Ø, 35 L/D, brand name: FBM ( Falzoni), type: ETF 120 V 380/5L, year: 1988. Engine: 200 KW. Degasifier and filter changer. Head cut under water, year: 2006, brand: PRT and force-feeding silo.

High pressure pump / Airless paint sprayer With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

WIWA High Pressure Pump 235.42R / 38042, YOC 2000 With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

Sollas SB 380 stretchbanding machine, pack size min. 50 x 15 x 20 mm (LxWxH), max. 210 x 250 x 150 mm (LxWxH), capacity up to 30 single or bundle packs per minute.

Here we offer a well-maintained injection moulding machine. Manufacturer / Type:BOY Type: XS (100-14) Serial No.:will be communicated in case of interest Year of manufacture:2015 Operating hours:25.000 h Version:Procan Alpha 2 / S1 Clamping unit Clamping force:100kN tie bar distance:160 x 110mm (2 tie bars) Mould installation height min.:100mm Platen distance max:250mm Ejector stroke:50mm Injection unit: Injection unit:cylinder ø14mm Shot weight max.:6,1 g/PS Injection flow:22g/sec Spec. injection pressure:2298 bar Sprue extractor integrated Dimensions & weights: Weight with control cabinet: 485 kg. Length: 1480mm Width (machine only):520mm Height min - max:1380 - 1690mm Oil capacity:28 L The visible mini-laminar flow unit and the stainless steel area cover belong to the machine Other possibly visible peripheral devices do not belong to t ...

punching and shearing capacity: 380 kN Punches e.g. 30 mm holes in 10 mm steel Shears on the flat steel shears to 300 mm to 12 mm steel Further technical data on request With a range of stamps and dies as desired