filing lin used for sale

Welding Fume Extraction LINCOLN NORWELD SP-3M Flow rate: 300 m3/h motor: 2.2 kW 380 V Dimensions: 1200 x 630 x 870 mm used, tested !

Fieldbus gateway, Canopen Fieldbus gateway: for EnDat encoders -Output signal: CANopen, DeviceNet or PROFIBUS DP protocol -to connect: from encoder to fieldbus -Signal converter: for encoders of the 600 series with EnDat interface -Protection class: IP 65 -Dimensions: 90/145/H30 mm -Weight: 0.38 kg

turning diameter: 325 mm turning length: 600 mm control: Siemens type: 840D Turret 12-fold, 12 stations: live tooling: turning speeds: 5000 U/min power capacity: 25 kW y-axis: mm c-axis: total power requirement: 35 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5x2,5x2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Intergas dosing unit DSD 500, type A, foaming unit and gas dosing station At the moment we have an intergas dosing unit for sale. This was a part of a project. Therefore the machine was used only very limited. - Operating hours: well below 100h - Weight: approx. 500kg Find more here - /

Empty bottle inspector dismantled and stored now Manufacturer: Krones Type: Linatronic 735 M2 Year of construction: 2007 Output: 39.600 bottles per hour Additional info: Glideliner, accutable and partly conveyor belts are also The Krones Linatronic 735 M2 is a high-speed label inspection machine designed for use in the food and beverage industry. It was released in 2007 and is capable of inspecting up to 72,000 containers per hour. Here are the specifications for the machine: - Dimensions: 4.4 meters long, 1.7 meters wide, and 2.7 meters high - Weight: approximately 4,500 kg - Power supply: 400V AC, 50/60 Hz, 16A - Maximum container diameter: 120 mm - Label height range: 10-200 mm - Label length range: 15-300 mm - Inspection accuracy: up to 99.9% - Maximum speed: 72,000 containers per hour - Operating temperature range: 5-45°C - Air pressure: 6 bar The Linatronic 735  ...

Hydraulic cylinder, synchronous cylinder, steering cylinder -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm -Dimensions: 234/89/H50 mm -Weight: 3 kg

Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Manufacturer: Lincoln -Type: Control 84513 -Number: 1x relay available -Price: per piece -Dimensions: -Weight: 0.9 kg

Indoor agriculture / vertical hydroponic farm, and the machines are associated with these operations. We are talking about leafy vegetables and herbs, to name a few examples: Iceberg lettuce, romaine, basil, mint, coriander, rocket etc. The machines are part of the same solution developed and manufactured by the Taiwanese company YesHealth. The machines are 2 years old. The drying machine has not been in operation for one year. Seeder, 2 kW Harvester, 8 kW Cleaning and drying machine, 20 kW Labelling machine, 300W Find more here - /

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS -Stations: 10 -Price: per station -Weight: 0.4 kg/piece

The 2005 Deckel Maho DMC 104 V linear is a CNC (Computer Numerical Control) vertical machining center manufactured by Deckel Maho, a part of DMG MORI. This machine is known for its precision and efficiency in machining tasks, including milling, drilling, and tapping. Here are some key features and specifications of the 2005 Deckel Maho DMC 104 V linear: - Travel and Table Size: - X-axis travel: Approximately 1040 mm - Y-axis travel: Approximately 600 mm - Z-axis travel: Approximately 500 mm - Table size: Large enough to accommodate substantial workpieces - Spindle: - Spindle speed: High rotational speeds for efficient cutting - Spindle power: Sufficient for heavy-duty machining tasks - Linear Drives: - Equipped with linear drives for the X, Y, and Z axes, providing higher precision and faster movements compared to traditional ball screw drives. - Control System: - Typically equip ...

Digital input device, Interbus -Tele-Link Version: 2.0 Siemens S5 -Weight: 1.7 kg

Complete Lacquering line - Feeding - Primer application unit - Dryer - UV plant - UV dryer - Stacking System components are all from Bürkler and Kontra Formats: 1860, 2800, 5600x2070mm Number of application units: 10 units, 3 of which are UV UV dryer: 1x 4 UV-tubes, 1x 5 UV-tubes: 1x 6 UV-tubes Output: approx. 3300m²/h Find more here - / Contact us at -

Control unit for electric forklifts, electric motor, DC motor, drive motor, motor control, motor controller, control, drive control, voltage converter, cooling fan, radiator, fan -Manufacturer: Linde, cooling fan from Linde R14 forklift -Dimensions: 260/150/H80 mm -Weight: 1.0 kg

Control: SIEMENS - 840 D - - -: - - - - - - - - -: - - - - - - Milling Machine - Horizontal | DMG - DMC 60H linear The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMC60Hlinear | DMC 60-H | DMG - DMC 60 H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Working length: 6100 mm Bending capacity: 3.0 mm CNC control: 400 A Bending angle: 143° Distance upper beam – table: 200 mm Projection: 1,050 mm Foot step switches: 2 pcs. Motor power: 11.5 kW Dimensions (length x width x height): approx. 7000 x 1500 x 1850 mm Weight: approx. 9.5 tons

Woodward LinkNet 9905-972 Ref J Overhauled Wärtsila Tuning Centre LinkNet 6 CH 4-20mA

Woodward LinkNet 9905-969 6 CH 4-20mA Overhauled Wärtsilä Tuning Centre

2 x Lindner Limator 1200 90 kW Year of Manufacture: 2013 6000 hrs Fully refurbished Find more here - / Contact us at -

This Linotype model 16A, still in print shop and running on continual basis. In original condition. Second owner more than 40 years. Including 5 magazines for letter format from 6 to 12 points, all serial tools and original brushes for cleaning and spare part manual.

Laboratory mixers, used Volume : 4 ltr. Drive : 1.5 KW --> with infinitely variable speed --> with control cabinet CE declaration of conformity possible

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Linde, drawbar complete with drive from electric hand pallet truck -Drive motor: Type T 12 24 V -Sale/Price: complete -Dimensions: 1200/440/H290 mm -Weight: 46 kg

ID3469 Simec LM2000 – Grinding line year/Baujahr 1999 Grinding line consisting of: Protec tilting table, infeed conveyor table, pre-grinding machine with 4 grinding supports, warm air blower, Kirschner putty station, oven, grinding machine with 10 supports (pre-equipped for 12) Grinding line made of: Protec tilting table, infeed conveyor table, pre-grinding machine with 4 grinding supports, warm air blower, Kirschner putty station, oven, grinding machine with 10 supports (pre-equipped for 12)

Control, control unit, interface, drive control, drive current control, circuit board -Manufacturer: Linde, control unit from electric hand pallet truck -Type: 3603605020 -Mat no.: 5210175 -Number: 1x control unit available -Price per piece -Dimensions: 130/100/H45 mm -Weight: 0.1 kg/pc.

Horn, siren, bugle, bugle -Manufacturer: Marco, horn siren from Linde electric hand pallet truck -Type: 90/1 L -Dimensions: Ø 90 x 60 mm -Weight: 0.1 kg

Manufacturer: METSO LINDEMANN Type of Machine : Press Shear Year of Manufacture: 2010 Technical Condition: Good After major renovation in 2023 Meter reading: 18,500 Mt/h Technical Data - Power Supply: Electric 3 x 90KV - Cutting Force: 630 tons - Scrap Compression Force: 630 tons - Number of Pumps: 3 pcs - Capacity: Approx. 8-22 tons/h - Loading Scrap: Left or Right Side - Loading Box: 12m³ - Total Weight (Machine + Container): 75 tons - Control: Remote Control - Hydraulic Oil Capacity: 6,500 liters Find more here - / Contact us at -

Cover for electric hand pallet trucks -Handover: in its current condition as inspected -Damage: see photos -Manufacturer: Linde Cover from electric hand pallet truck -Dimensions: Ø 300 x 200 mm -Weight: 1 kg

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch, 5-port Fast Ethernet Switch -Manufacturer: TP-Link, 5-port Fast Ethernet Switch -Type: TL-SF1005D -Number: 2 modules available -Price: per piece -Dimensions: 130/75/H30 mm -Weight: 0.3 kg/pc.

Laboratory mixers, used Volume : 4 ltr. Material : Areas in contact with the product in stainless steel Drive : 1.5 KW

Scrap shears and a package compactor = machines are from the 1960s Find more here - /

1 x Wohlenberg 132 guillotine equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Baumann BA 3 MAN unloader 1 x Baumann BB5 stack lift

Muffler, exhaust system, tailpipe, silencer, exhaust muffler -Silencer: for Linde H60D -Type: G 4979 0694 unfortunately no more precise designation -Dimensions: see photos -Overall dimensions: 1560/370/H230 mm -Weight: 11.2 kg

Cold room lock, cold storage lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock, unused, original packaging -Type: 3.16.416.2 Links -Number: 8x door locks available -Price: per piece -Cardboard dimensions: 260/150/H40 mm -Weight: 1.1 kg/pc.

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.415.2 Links -Quantity: 4x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.3 kg/pc.

1 x Wohlenberg 132 guillotine, equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Baumann BA3 unloader (year 2008)

Welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor -Manufacturer: Messer Lincoln mobile welding fume extraction -Type: Fumatech MF 1100 -Drive: 1.1 kW -Suction arm: length 3530 mm -Transport dimensions: 1200/560/H2320 mm -Weight: 84 kg

Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 -Measuring range: 200 Newton -Division: 2 N -Dimensions: 400/40/H40 mm -Weight: 0.5 kg

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: 3D-control Heidenhain iTNC 530 HSCI Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Cross580 mmLongitudinal450 mmVertical460 mmTool changerType of magazineChain ApplicationVertical Type of gripperDouble gripper Number of tools30 Rigid tableRigid table, clamping area 460 x 600 mm / 18,11 x 23,62 inch Loading weight max. 600 kg / 1322 lbsSpindle speed up to 40,000rpm with Shaft CoolingSpindle speed 20 up to 40,000 rpm within shaft cooling for tool taper HSK-E50 DIN 69893 AC-Main drive with 19,5/15 kW (100/40%DC) 14,5 ...

GeneralTwo spindle Swiss turning automatic lathe; Control: Fanuc 310is Working areaBar diameter max.42 mmChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B236 and bush-spindle syncronismDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55 KWAxial drilling unit for back work.oper.Axial drilling unit for support for back working operation (slide 2) with 2 rot.spindles, junction for collet ESX/ER 20 and 2 cyl.junction diam.25mmDouble tool h. for ext.machining on rev.Double tool holder for external machining on revolver for shaft 16x16Double drill hold. on rev.cyl.junct.d.25Double drill holder on revolver with cyl. junction diam.25mmRad.driven mill.-drill.unit on rev.Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 sp ...

GeneralHorizontal machining centre - Horizontal milling head; Control: CELOS with Siemens 840D sl Operate Technical DataRapid traverse longitudinal/transverse/vertical60/60/70 m/minFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minWorking area 1Longitudinal800 mmCross1050 mmVertical900 mmCabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 630 x 630 mmRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmMaximum load (table centre) 900 KgCentre bore 50 mm4. Axes (swivelling range) 360 x 0,001 degreePackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)Motor ...

Oiler, line oiler, line oiler, eco line oiler -Oiler: Line oiler for demolition hammers or other pneumatic tools -Number: 3x oilers available -Price per piece -Dimensions: 450/110/H100 mm -Weight: 3.1 kg/piece

GeneralCNC Swiss type lathe with Fanuc control; Control: FANUC 310 iTB Working areaTurning diameter33 mmSpecial equipmentHinged belt chip conveyor with Discharge height 1200 mm Aut. bar feeder IEMCA BOSS 545/32 E, max_ L=3200 mm, incl. guide channel diam. 18 mm

Still Water PET Bottling Line – 16,000 BPH (2018) Complete still water bottling line designed for high-efficiency production of small-format PET bottles with thermoseal lids. The line is suitable for filling 100 ml, 150 ml, and 200 ml PET bottles and includes blow molding, filling, sealing, labeling, packing, palletizing, and wrapping equipment. General Information - Application: Still / non-carbonated water - Bottle Material: PET bottles with thermoseal lid - Output Capacity: 16,000 bottles per hour - Bottle Sizes: 100 ml, 150 ml, 200 ml - Year of Manufacturing: 2018 Production Configuration - Combi Machines: 2 units (Blow Moulder + Filler + Sealer) - Machine Speed: 8,000 BPH each - Preform Type: Flat Neck – 6.39 g - Sealing System: Thermoseal neck Filling and Sealing Stations - Filling Station: Two-step system with two stations - Each station equipped with 8  ...

Oiler, line oiler, line oiler, eco line oiler -Manufacturer: ASL INC, Line oiler Line oiler for demolition hammers or other pneumatic tools -Dimensions: 350/190/H150mm -Number: 1x oiler available -Weight: 4.2 kg

x-travel: 640 mm y-travel: 600 mm z-travel: 500 mm control: Siemens 840 D total power requirement: 19 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 5 x 4 x 3 m No. 5312: Vertical machining center DECKEL MAHO type DMC 64 V linear year of construction 2007 Siemens 810 D Shopmill Working area: 640 x 600 x 500 mm Drive power: 13/19 kW Equipment: Table 850 x 600 mm ( WITHOUT the clamping devices shown ) Preparation 4th axis Production package / IKZ 40 bar: BFA 600 cooling lubricant cleaning system Integrated spiral chip conveyor Separate scraper belt chip conveyor documentation Miscellaneous: Spindle ISO 40 Speed range 1-12,000 min-1 Space requirement see sketch Transport dimensions approx. 6.5 loading meters Weight approx. 8.8 tons The machine is ready for operation with wear and tear due to age and use. Short video: https://www.youtube.com/watch?v=sDkgx4BYXeY Special pric ...

x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: iTNC 530 Heidenhain turning speed range - milling: 20 ~ 12.000 U/min power capacity - milling spindle: 35 / 25 kW tool taper: SK 40 tool piece magazine with: 100 pos. table surface area: 2.600 x 600 mm rapid traverse X-axis: 100 m/min rapid traverse Y-axis: 50 m/min rapid traverse Z-axis: 50 m/min max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg max. table load: 2.200 kg total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 7,0 x 4,2 x 2,7 m Chip conveyor: Coolantsystem: interface 4. axis: 4. axis: 560 mm Seperating wall: oil mist extraction: Tailstock: 350 mm / MK 5 elektr. hand wheel: through spindle coolant: 40 bar Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - in ...

max. Spindle speed: 5000 U/min. travel -x axis: 160 mm travel -z axis: 450 mm numbers of turret head positions: 12 tool taper: VDI 30 Control: Heidenhain iT Plus Dimensions (L x W x H): 4,5 x 2,5 x 2,5 m weight of the machine: 3700 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bottle inspector Krones / Germany Type Linatromic 735 Full Inspector With automatic rejection Year of construction: 2011 FILM AVAILABLE - PLEASE REQUEST

Stock number: 3944 Suction Manufacturer: 3NINE LINA, Type: 500 Oilmist Separator Machines NO.: OLIETAAGE UDSUGER, Specifications: Fence effect 500 m3/hour m/3 Engine power 0.55 Kw Cleaning oil mist (cutting fluid/coolant) Min. / max Grad 5-50 degree C. Height: 840 mm, Width: Dia. 480 mm, Weight: 30 kg

line for croisants

New longitudinal veneer splicer Brand: CASATI Type: LINEA 1250 Technical details: Arm length 1.250 mm Veneer thickness 0,4 - 4 mm Min. veneer length 350 mm Min. veneer width 45 mm Glue for pre-gluing: Urea and PVA Glue for integrated gluing: Urea Feed speed 10 - 40 m/min. Heating area length 1.250 mm Total connected load 7,4 kW Power consumtion approx. 6 kw Compressed air consumption 5 Nl/min Compressed air pressure 6 - 8 bar This machine permits the longitudinal splicing of veneer sheets by applying glue on their edge. Immediately afterwards the veneer will be passing through a heated zone in order to activate the glue reaction: the glue will be hardening thus bonding the veneer sheets. The integrated glueing device allows the joining by one only process. Its also possible to bond pre-glued veneer sheets Option for an extra charge: Cooling device for the glue po ...