filing lin used for sale

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk A mast that is too high can be dismantled for transport on request. Youtube function and status video: https://youtu.be/jYmXjWErsoM - Former Linde full-service device - valid service until 03/2027 - UVV valid until 03/2027 - Battery: 10/2020 80V 6PzS 930AH, with very good performance, measured with 84.1V - 3rd+4th+5th valve; Swivel clamp (360° rotary device with fork clamp) with side shift - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - Full cabin with radio, heating, additional canopy and windscreen wipers - white non-marking tires - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Warning light orange - Safety light at the rear - Safety light at the front -  ...

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/bzBo3cFRscs - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 18/2021 48V 375Ah, good performance measured at 24.7V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45450-327

Battery from former Linde Service 830x730x630mm Voltage in idle mode uncharged 51.23 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45450-1134

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45450-3634

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video:https://youtu.be/l0uTt_vas10 - Former Linde full-service device - Battery: 14/2020, 24 3PZS 375Ah, very good performance measured at 25.2 V Auction-ID: A1-45450-343

Foreign buyers get the 19% VAT back from the auction house immediately after the machine is exported Youtube function and status video: https://youtu.be/fhHgzyb32fo Former Linde full-service machine valid service until 12/2026 UVV valid until 12/2026 Battery: 206/11/2019 24V 3PzS 345Ah , with very good performance, measured at 25.0 volts - Triplex mast with full free lift Auction-ID: A1-45450-354

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/jkFSkRyY75c - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 80V 5PzS 775Ah, very good performance measured with 82.7V - Clear-view mast without central hydraulic cylinder - 3rd valve; with sideshift - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45450-60

Youtube function and status video: https://youtu.be/P-4ja3h2AOI - Former Linde full-service device - Valid service until 09/2026 - UVV valid until 09/2026 - Battery: 80V 620Ah, with very good performance, measured at 85.4V - 3rd + 4th valve; with sideshift and forks newly 0972025 Auction-ID: A1-45450-81

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/k7v9nwCFAqA - Former Linde full-service device - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Front camera - Comfort seat with lumbar support and seat heating - LPG gas exchange bottle (quick to exchange, available everywhere) - Attention: Engine steering noise Auction-ID: A1-45450-162

Loading onto trucks no problem Auction-ID: A1-45450-3636

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/yGXAJKM0BS0 - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 44/2023 48V 375Ah, very good performance measured at 25.7V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45450-317

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/D-cJO92WeE0 - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery:08/03/2024 24V 3PzS 375Ah, very good performance measured at 25.4V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45450-322

Window lintels various. Versions, 150-200 cm, including cantilever rack and standing in front of it

Youtube function and status video: https://youtu.be/HX8_KF9h8M0 Former Linde service device Service valid until 01/2027 UVV valid until 01/2027 Battery: Linde 03/2018 48V 625 Ah, with good performance; measured at 49.4V - Duplex mast with full free lift - 3rd valve; Sideshift - 4. Additional valve free for fork adjuster - Linde safety Pilot with scale, lift height and stroke angle indicator Auction-ID: A1-45450-44

Discharge Power Supply HAUG Tatic Line EN SL LC Year 2009, S/N 01.7833.000, 230V 50-60Hz, Box

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and state video:https://youtu.be/gn1RA5Puyho - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 80V/5PzS/575Ah, very good performance measured at 83.65V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift and mast position memory - 3rd + 4th valve; Fork adjuster with sideshift - Windshield with windshield wiper - LED front work light - LED work light at the rear - Blue safety light at the rear - Comfort seat Auction-ID: A1-45450-76

Qty. 1 Second-hand Hot Rolling Mill Line Manufacturer: NKMZ Built: 1972 Roll Force: 2300 T (Periphery roll speed)Mill Speed: 0-24-210 m/min. Slab Thickness: 300-350 mm Width: 740-1540 mm Length: 1100-3000 mm Slab Weight: 1-2.7 T Slab Temperature: 370 – 550 °C Rolled Thickness: 8-200 mm Width: 750-1550 mm Plate Length: 2000-8000 mm Coiled Thickness: 6 – 12 mm Coiled Width: 700-1550 mm Coil I.D./O.D.: 750/1400 mm Coiling Temperature: 300-350 °C Back-up Rolls Dia.: 1500 – 1400 mm Work Rolls Dia.: 800 – 760 mm Roll Barrel Length: 1800 mm

-Storage racks with 6 different diameters. -Automatically driven roller conveyors, fully automatic length stop, automatic ejection in pre-sorting compartments. -PLC control for convenient machine control. -Blade width of hydraulic machine : 150mm. -Capacity: 5 to 15Ton per day/shift. -Low maintenance & wear parts, still in perfect working condition with no known problems. Sale due to cessation of internal production. DBS3 automatic double bender. -Linked with cutting line. Equipped with hydraulically controlled roller conveyor, automatic transfer system, automatic double bender and ejection system in automatic pre-sorting compartments. -Simple PLC control, equipped with automatic clamping system. -Low maintenance & wear parts, still in perfect working condition with no known problems. Sale due to cessation of internal production. Auction-ID: A3-43515-16394

Equipped with: year of construction 2018, 5 parts Roller bench 210x60x88 Roller conveyor 115x62x88 Roller conveyor 350x50x88 Car wash 247x70x168 Corner 70x80x89 Auction-ID: A1-40105-81

Closed heated cab , led work lights , flash light ,blue spot , kaup fork equipment Auction-ID: A3-43515-253

Equipped with: solid rubber tire, SE 4x, gearbox type HY, weight 6.58 t, turning radius 2.75 m, model series 394, engine manufacturer VW, engine type CBJB, 55 kW, mechanical suspension seat, mini-lever control on armrest, work lights. Auction-ID: A1-40135-89

Among other things, equipped with AMG line interior and exterior with special 20 inch black rims Comfort seats Burnmester 3D Surround System 360 degree camera heated steering wheel Memory package seat heating and cooling adaptive cruise control lane assist climate control Carbon finish navigation . CarPlay electrically adjustable seats active steering assistant Digital LED lighting Sports suspension Premium package Winter package and many more options. View the attached PDF list for a complete overview Auction-ID: A1-42014-8

Linde battery with automatic filling, led work lights, blue spot front and rear, flash light Auction-ID: A3-43515-250

Engine defective, no compression, cause unknown Auction-ID: A1-42014-171

Equipped with: lifting capacity 2,000 kg (2.0 tons), power supply: 48V electric, two 11 kW AC motors, maximum speed: 20 km/h (loaded/unladen), weight: Approx. 3,400kg, Linde Load Control, double accelerator pedals, 48 volts maintenance-free Auction-ID: A1-40135-41

Front and rear work lights, heated cabin, overhead exhaust, pre air filter, flash light, suspension carriage, illuminated document carrier Auction-ID: A3-43515-242

Auction-ID: A1-43332-2

Sweetpro BGI 810-3 100kg Length 100cm Auction-ID: A1-45889-351

8 pieces Dekolight Linear 100 Article 707016 See datasheet 4000K - without rails, without connectors - - Figure shows assembly example - Auction-ID: A1-45889-358

2 SAT antennas 1 x Grundig approx. 1 m diameter 1 x WISI Orbit line 36 in original packaging Auction-ID: A1-45889-2685

Heated seats Air cushion seat from Grammer LED headlights Spot front yellow signal warning light LED reversing lights and spot Auction-ID: A1-45975-3

Lightly used, fully functional paving stone production equipment Year of manufacture: 2019 Power source: 400 V AC / 50 Hz / 3 PH Main breaker: 400 A Hydraulic pressure: 170 bar / 2465.65 PSI Pneumatic pressure: 6 bar / 87.02 PSI Power: 160 kW Highest manufacturable product height: 250 mm Required installation area (base area): approx. 32 × 18 m Required ceiling height: 8 m Capacity, Production per cycle: approx. 1.2 m² paving stone approx. 2.1 m² rustic stone (semi-finished) Production rate: approx. 1800 cycles per 8-hour shift 5 colors can be dispensed can be viewed under power for disassembly the manufacturer can give a quote For viewing or further questions Contact:  Email: gabor.racz@surplex.com Mobile:+36304509673 Auction-ID: A7-45970-1

5 x steel cable safetys with quick-connect link Sweetpro BGI 810-3 100kg Length 100cm Auction-ID: A1-45889-431

X-axis: 2500mm Y-axis: 920mm Z-axis: 820mm Machine is equipped with: - chip conveyor - through spindle coolant 40 bar - coolant filtration system - 30 position ATC Auction-ID: A1-45752-5

10 pieces Dekolight Linear 100 Article 707016 See data 4000K - without rails, without connectors - - Figure shows assembly example - Auction-ID: A1-45889-360

Sweetpro BGI 810-3 100kg Length 100cm Auction-ID: A1-45889-436

serial number - 213916-1701-0262 connections - 6bar/400V/5-Hz/400VA version - 6.10 Auction-ID: A7-45917-6

CNC VERTICAL MACHINING CENTRE Inv. No. 13.212M1 Make KEARNEY & TRECKER MILWAUKEE Model MODU-LINE Control Siemens 840D Mach. No. 27897 Table size 1.879 x 1.016 mm X-travel (longitudinal) 1.830 mm Y-travel (cross) 762 mm Z-travel (vertical) 762 mm Workpiece weight 6.800 kg R.P.M. 4 – 2.400 HP 25 Volts 400 Cycles 50 Including: Automatic Tool Changer Built in rotary table Ø 813 mm Auction-ID: A1-45737-190

Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2, ...

CNC HORIZONTAL MACHINING CENTER Inv. No. 12.178MM Make TOYODA Model LINEAM III Control MELDAS M650 Year 2004 TABLE Pallet size 450 x 450 mm Max. load on pallet 400 kg Table indexing increment 0.001 degrees STROKE X-Axis stroke 630 mm Y-Axis stroke 630 mm Z-Axis stroke 700 mm Distance from spindle center to top of pallet 50 – 680 mm Distance spindle nose /center rotary index table 50 – 680 mm FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20,000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2.5 sec. DRIVE MOTOR Spindle drive motor Ac 45/30 kW MACHINE WEIGHT & POWER REQUIREMENTS Machine weight 15.000 kg Power requirement 96 kVA ACCESSORIES: Spindle linear mo ...

Input line L 6200mmxW385mmxH920mm; Output line L12200mmxB1280mmxH950mm; push-off unit L1450mmxB1800mmxH650mm Auction-ID: A1-43429-28

4 overview photos to determine the size of the machine - afterwards photos per floor what happens to the carpet. Starting with the entrance with the pallet truck - here there is a lift in the ground that raises the pallet, a machine operator only has to fold the carpet onto the belt to send to the roll-up machine. Then it is rolled up and pushed to the middle part via hydraulic sliding arm in roll. Once in the middle, you can choose to place the carpet in a plastic packaging with/or without. After packing the roll, we see the end result in the photo (carpets in the end photo purely for illustration purposes and therefore not included, as well as the label printers that are in front of the machine are not included) Machine consists of 2x roll-up line and 1x packaging line. So the first photos are in mirror image the same for roll-up line 2. Auction-ID: A3-43519-16520

Equipped with: (1x) Makor TEP 2500 (350 kg) feed belt, (1x) Makor TEP 2000 (320 kg) feed belt, (1x) Ricambi RO135035 belt sander (2022), (1x) Tecnolegno N200/P belt sander and (1x) Tecnolegno N90/S belt sander, (1x) Makor double-sided polisher, (2x) control box (1200x600x1900 mm). With flexible extraction pipes Auction-ID: A1-43429-6

Input length 150-1000 mm; wood width 40-150 mm; wood thickness 15-100 mm; Press length 3300-6500 mm. compartment entry type BF 4-600/1500; input station ESTA-600/1000; Milling station CP-205/00/1000; Graco adhesive application system; gears and three-phase motor UKS 240/600/1000; infeed chain transport EKK 240/600/1000; VE 205 feed-through system; press Conti A-20/6500; chain transport; with milling tools; Test equipment and accessories Auction-ID: A1-43429-81

Auction-ID: A7-46302-1

Fenwick-Linde P60Z Electric Tractor (48V) a powerful and compact solution for moving heavy loads in your warehouse or on your site? This Linde P60Z is a workhorse known for its durability and easy handling. Main specifications: Brand/Model: Fenwick-Linde P60Z (French solidity) - Capacity: Powerful 48 Volt installation - Pulling force: Up to 4500 N (ideal for heavy trailers) - Own weight: Very stable (approx. 1130 kg including battery) - Payload: Can also take 150 kg on board - Linde is known worldwide as the \"Mercedes among forklifts and tractors\". The P60Z is extremely manoeuvrable, making it perfect for narrow aisles and busy work environments. Thanks to the 48V system, the machine delivers constant performance, even with intensive use. Ready for immediate use. Can be loaded by seller for transport if necessary Auction-ID: A3-43519-10661

4th valve with pipes to the League of Nations, welding rack, 4 x led work light at the front, 2 x led light at the rear + flashlight, gas tank empty Auction-ID: A3-43519-264

Insertion of carpets with max width 3000mm - line around the bundling of several rolls of carpet - afterwards plastic is detached from the mobile knife and the ends are melted together via welding bar. Pak rolls further on the machine and goes towards ultrasonic sealer (generator is missing that generates energy - so it was no longer used but can therefore be put back into operation if generator ultrasonic is installed). Suit continues towards clipper machine (in 2 pieces - see photo). Auction-ID: A3-43519-16521

Wood length 600 cm including chain transport; tilter; chain transport with sorting key; stacker with elevator; stacking slats warehouse; Total set-up Dimensions approx. 22 x 10 meters; Roller conveyor length 13 mtr Auction-ID: A1-43429-87

Paint Roller Set – Clever Paintbrush System approx. 1700 pcs. consisting of: 1x Large paint roller with integrated tank, 1x Small roller for corners and hard-to-reach places 1x edge brush, 1x measuring cup with spout, 1x shelf for roller, 1x handle 3x extension poles for comfortable working on high walls or ceilings Material: Plastic, Foam, Stainless Steel - Colour: Blue/Black/Silver Car Air Freshener approx. 1700 pcs. Material: Aluminum alloy or ABS plastic (depending on the version) Color: Black (matte) Design: Compact with ventilation clip, Compatible with fragrance sticks / aroma sticks b>In addition, the following are included: Air Freshener Refill – Purple 988 pieces Air Freshener Refill – Yellow 900 pieces Air Freshener Refill - Blue 740 pieces Air Freshener Refill - Green 200 pieces Air Freshener Refill - brown 4 pieces Universal socket wrench w ...