filing lin used for sale

Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial.-No.: 637 Contact length, effective: 1600 mm Pad width: 180 mm Design: smooth pads at the bottom and top Haul-off force: approx. 20,000 N Hail-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 70 mm -recess recess: Ø 194 mm -Weight: 20 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 225 mm -Throughout: Ø 70 mm -Weight: 25 kg

Linear drive, linear gear, screw jack, spindle drive -Pneumatic linear drive -Festo type: DGO -. -Stroke: 490 mm -Shaft: Ø 22 mm -Dimensions: 42/42/705 mm -Weight: 1.05 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 70 mm -Weight: 27.5 kg

Used pet food production and packaging line made by Waldner. New 1995.

Product number: 3073 Type: Skindeasy Serial number: 48201 Year: 2015 Power: 3 x 400V, 50Hz, 0.4kW Dimensions: 1800 x 650 x 1400 mm

sheet width: 480 mm plate thickness: 3 mm stations: 13 total power requirement: kW weight of the machine ca.: 11 t dimensions of the machine ca.: 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The techn. Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it applies exclusively our business and conditions of sale. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 18.5 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 12.5 kg

THK HSR35

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 14 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 24.5 kg

Linear drive, linear gearbox, lifting gearbox, spindle drive -Manufacturer: Norgren -Type: M/46025B/M/320 -Stroke: 320 mm -Piston: 25 mm -Dimensions: 520/70/H60 mm -Weight: 1.6 kg

Three-jaw chuck, three-jaw lathe chuck -lining size: Ø 190 mm -Rezess: Ø 155 mm -Passage: Ø 54 mm -Weight: 11 kg

Ball Bushing Linear Guide, Open Linear Bearing Unit INA KGB0 2558 PP ( KGB02558PP ) Diameter: Ø 25 mm Foot: 81 x 29 mm Hole Spacing: 68 mm Material ( Housing ): Aluminum New ! Dimension: 81 x 58 x 54 mm

Linear unit for pneumatic cylinders COMP AIR

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Throughout: Ø 77 mm -Weight: 18 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: 200x3-III -TGL: 30-2332 -Chuck size: Ø 200 mm -Weight: 16.7 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -Short taper: 5 -Through hole: Ø 42 mm -Weight: 8.7 kg -Scope of delivery according to pictures

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: B200x3x6 -TGL: 30-2332 -Chuck size: Ø 200 mm -Cone: Ø 104 mm -Hole circle: Ø 132 mm -Through hole: Ø 54 mm -Weight: 15 kg

Linear displacement transducer, LVDT sensor, analog SENSOREX SX 12 N 200 ( SX12N200 ) 10 01 02 Sensor housing: Ø 12 x 315 mm Probe: Ø 2.5 x 300 mm New, with underlays ! Dimensions ( packaging ): 500 x 50 x 50 mm

Linear unit for pneumatic cylinders JOUCOMATIC

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Throughout: Ø 60 mm -Weight: 14.5 kg

Linear guide carriage STAR 1651-514-10 rail width: 34 / 45 mm New ! Dimensions: 160 x 140 x 55 mm

STAR 1653-524-10 New !

INA I09 LKS 08VBG3 V1 ( I09LKS08VBG3V1 )

INA LFKL 52 E SF (205-155) ( LFKL52ESF(205-155) )

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 18.7 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 25.8 kg

STAR 1631-393-10

Linear guide carriage Star 1651-294-10

IKO LW 15 x 240 ( LW15x240 )

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Rezess: Ø 210 mm -Weight: 17.3 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 305 mm -Passage: Ø 105 mm -Rezess: Ø 250 mm -Weight: 31.3 kg

Linear guide rails, roller rail CS REXROTH R180635331 512175403 2 pcs Length: 836 mm New ! Dimensions: 850 x 80 x 40 mm

Linear guide rails, roller rail CS REXROTH R180635331 512175402 2 pcs Length: 916 mm New ! Dimensions: 930 x 80 x 40 mm

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 82 mm -Short taper: 8 -Weight: 24.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Short taper: 6 -Throughout: Ø 80 mm -Weight: 25.9 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Short taper: 6 -Weight: 36 kg

Three-jaw lining, 3-jaw lining -Feed size: Ø 200 mm -Passage: Ø 56 mm -Rezess: Ø 75 mm, Ø 103 mm -Weight: 17.9 kg

Linear Carriage, Roller Carriage CS REXROTH R185362210 New ! Dimensions: 310 x 230 x 110 mm

Linear guide rails with carriage PAGUS 700 x 43 x 37 mm ( 700x43x37mm ) carriage 190 x 25 mm used, tested ! Dimensions: 700 x 43 x 37 mm

Linear guide rails with 4 carriages PAGUS 2000 x 43 x 37 mm ( 2000x43x37mm ) 4 carriages 120 x 25 mm New ! Dimensions: 2000 x 43 x 37 mm

Linear guide carriage with linear guide rail INA Linear guide carriage: O4 D4 KWE 35 G3 V2 ( O4D4KWE35G3V2 ) table: 75.5 x 100 mm 4x Threaded hole: M10 x 1.5, continuous Hole spacing: 82 / 62 mm 4x Bore: Ø 7.5, continuous Hole spacing: 80 mm Linear guide rail: B7 TKD 3FG3/0300 ( B7TKD3FG3/0300 ) length: 300 mm, width: 34 mm, height: 23 mm through holes: Ø 9.5 / 15.0 mm, depth: 11 / 12 mm hole spacing: 80 mm used, tested ! Dimensions: 300 x 100 x 48 mm

Three-jaw chuck, 3-jaw chuck -Type: OM200-ZJ -Chuck size: O 200 mm -Passage: O 56 mm -Admission thread: M60 x 5.5 mm -Weight: 19.8 kg

Linear guide rails with 4 carriages PAGUS 2000 x 43 x 37 mm ( 2000x43x37mm ) 4 carriages 120 x 25 mm Dimensions: 2000 x 43 x 37 mm

Linear guide rails, roller rail REXROTH 1580 x 65 x 60 mm ( 1580x65x60mm ) R180760231 New ! Dimensions: 1580 x 65 x 60 mm

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 54 mm -Rezess: Ø 159 mm -Hole circle: 175 mm -Weight: 13.5 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 54 mm -Rezess: Ø 159 mm -Hole circle: 176 mm -Weight: 14.2 kg