file machine used for sale

grinding length:900 mm grinding width:400 mm workpiece height:450/530 mm table clamping surface LxW:1.320 x 300 mm magnetic plate size:880 mm x 280 mm mm Finimatic Creep speed Add-on for Diaform Rectifier system Coolant device Infinitely variable grinding clamping drive

- Standard machine, with glue pallets - With thermo-shrink head - With bottle conveyor and accumulation table at the exit - Mobile machine, on wheels - In good working order

Manufacturer: BATTENFELD Type: HM 1300-9200H-7700H-BM Control: UNILOG B4 Clamping force: 13000 kN Year of construction: 2005 Technical data closing page: Drive type: fully hydraulic Closing type: Full hydraulics Type: four-spar Clamping force: 13000 kN Tie bar size h: 1600 mm Tie bar size v: 1250 mm Panel size h: 2220 mm Panel size v: 1880 mm Installation height min: 1000 mm Installation height max: 1800 mm plate spacing max.: 3850 mm Opening distance: 2850 mm Ejector stroke: 350 mm Ejector force: 165 kN Centering movable plate D: 315 mm Centering fixed plate D: 315 mm Technical data spray side: Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1630 bar Screw length: 22 l/d Plasticizing current: 144 g/s PS The technical data of the 2nd injection unit are as follows: Injection unit II 7700 Screw diameter 100 mm, Specific spray pressure 1960 ...

bore capacity in steel (diameter):50-60 mm arm length:1.600 mm weight of the machine ca.:5-7 t spindle taper MT:wahrscheinlich MK5

bore capacity in steel (diameter):40 mm arm length:1250 mm workpiece height max.:1390 mm spindle taper: MT:5 table surface area:750 x 1380 mm surface area:1450 x 920 mm total power requirement:5 kW weight of the machine ca.:3000 kg dimensions of the machine ca.:2060× 930 × 2760 mm

Extruder 65/22D. Battery head 3.7 ltr. Locking plates 600 x 600 mm. Clamping force 630 kN. New Beckhoff control system installed in 2019. Available immediately from stock

NC Rotary Table Brand FIBRO, type 11.13.6.15.5.11.11.4.0120 T2 Diameter 800 mm Height: 240mm The indicated retail price is net.

bore capacity in steel (diameter):40 mm arm length:1250 mm workpiece height max.:1390 mm spindle taper: MT:5 table surface area:750 x 1380 mm surface area:1450 x 920 mm total power requirement:5 kW weight of the machine ca.:3000 kg dimensions of the machine ca.:2060× 930 × 2760 mm

bore capacity in steel (diameter):10 mm throat:210 mm bore stroke:100 mm total power requirement:0,7 kW weight of the machine ca.:302 kg dimensions of the machine ca.: 620 x 800 x 1950 mm Table dimensions:350 x 250 mm spindle speeds::250, 355, 710, 1000, 1400, 2000, 2500 U/min

bore capacity in steel (diameter):50 mm total power requirement:7,8 kW weight of the machine ca.:1720 kg dimensions of the machine ca.:1200 x 770 x 2700 mm number of spindle speeds:45 - 1000 mm surface area:630 x 500 mm

General: Granite slab 1,400 x 750 x 170 mm

(BEING NEGOTIATED) HUSKY HYPET AE 230 RSE 80D/80 + MOLD + AUX inc CHILLER OCT 2013 Mold : 14g x 48 (30mm neck for water) cavity (HUSKY) Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FASTEST DELIVERY MUST GO ASK FOR VIDEO WILL NOT LAST LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

bore capacity in steel (diameter):50 mm total power requirement:7,8 kW weight of the machine ca.:1720 kg dimensions of the machine ca.:1200 x 770 x 2700 mm number of spindle speeds:45 - 1000 mm surface area:630 x 500 mm

throat:640 mm total power requirement:1,6 kW weight of the machine ca.:450 kg dimensions of the machine ca.:1000 x 600 x 2100 m table-size:455 x 380 mm chuck::MK 3 working area:355 x 280 mm

HOFLER HF 2000L hobber/gasher with both internal/external heads Year: 2013 Installed in 2020 Less that 200 working hours Table diameter: 1500mm Table loading: 18000kg Working stroke (external hobbing): 1760mm Working range above table (external hobbing): 150-1910mm Working range above table (internal hobbing): 250-1460mm Counter support-end face above table: 800-2300mm External toothing, Max: 2000mm Internal toothing, Max: 2400mm CNC control: Siemens 840D Complete weight: 61000kg Equipped with counter support

bore capacity in steel (diameter):55 mm arm length:1600 mm total power requirement:4 kW weight of the machine ca.:5,5 t dimensions of the machine ca.:2800 x 980 x 3000 mm

arm length:1600 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:2800 x 980 x 3000 mm

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

Used OMP chain quarrying machine

Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of construction: 1990 Machine no.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outdoor clearing Pulling force: 25.000kg Cutting speed: 7.2 / 8.1 / 9.6m/min Maximum tool length: 3520mm Passage width: 520mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12.300 x 6.400 x 4650mm Power Supply: 380V 50Hz/110kW Accessories/ Special equipment: - 6 tool carriers for tool change - Machine documentation Remark / General The machines are in good condition. The machines are dismantled with us in the Bearing. The total volume of the plant comprises several trucks (approx. 70 tons per machine). The machines have produced connecting rods for passenger car diesel engines. Chain scrapers are designed for use in mass production. The continuous ( ...

grinding diameter: 350 mm grinding length: 600 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±10 ° longitudinal feed of the table: 1100 mm table speeds: 0,02-6 m/min : 130 kg cross travel: max. 270 mm : 130 inkl. Spannung kg : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service  ...

Digi-Fold Nagel Serial: 120481 Include Operating manual and spare part list No working condition / For spare parts or repairing if invoiced in Germany + 19 % VAT Spare parts carrier / Non-functional

centre height:500 mm centre distance:2000 mm control:CNC Grundig Numerik total power requirement:400 V, 50 Hz, 22,5 kW weight of the machine ca.:3300 kg dimensions of the machine ca.:2500 x 4000 x 2400 mm

table-size:900 x 600 mm three-axis-real value indicator: EDM Walter axis stroke (X,Y,Z):400 x 600 x 180 mm workpiece weight:max. 650 kg

x-travel:100 mm y-travel:100 mm z-travel:100 mm total power requirement:0,6 kW weight of the machine ca.:130 kg dimensions of the machine ca.:1600 x 1000 x 1300 mm milling depth:0-50 mm

Weibert FS32 Dressing thickness planer Planer width: 320mm Planing shaft: 3-reversible knife shaft Motor power: 3KW n=4500U/min, 400V Passage height: 4-225mm Side stop WJ-300100 OPTIONS AT EXTRA COST: Professional dressing stop Long-hole drilling equipment Wescott Chuck 0-16mm Driving equipment Digital height adjustment Dressing table extension adjustable 750mm Drive motor 4KW S1

x-travel:630 mm y-travel:200 mm z-travel:360 mm total power requirement:7,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1500 x 1800 x 1900 mm spindle taper:SK40 table-size:250 x 1100 mm

x-travel:1120 mm y-travel:370 mm z-travel:410 mm total power requirement:14,5 kW weight of the machine ca.:3850 kg dimensions of the machine ca.:3,5 x 3,5 x 2,2 m Table dimensions:400 x 1600 mm spindle taper ISO:50

x-travel:1120 mm y-travel:345 mm z-travel:400 mm total power requirement:14,5 kW weight of the machine ca.:3,85 t dimensions of the machine ca.:3.500 x 2.920 x 2.710 mm table-size:1600 x 400 mm spindle taper:SK 50

Beading machine Prinzing Type SME 200/11 Year of construction 2006 Projection 1100mm Connected load 5,5KW sheet thickness 1.5mm VA Control Siemens Siematic OP7 Extras: -Parallel lining of the top roll with rolling bearing working shafts -infinitely variable motor for drive -motorized delivery of the harmonic, infinitely variable -Feed control for automatic with sensor control Sheet metal guide device in table design Total weight 6700kg The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals!

SCM edge bander model BASIC 1 : - useful thickness of the panel from 8 to 40 mm - feed speed 8 mt/min - overall dimensions approx. 1.7 x 0.7 x h = 1.3 mt Operating groups: - gluing with hot melt glue tank - loader and shearing for roll material - Header kW 0,6 - Trimmers kW 0,5+0,5

Grinding machine for machine tools, especially small lathes, etc.

control:siemens 1P 6SL 3054--0CE01-1AA0 Documents:vorhanden

Headop Automatic Feeder With 4 x 4 Openings Opticontrol for pile control Siemens electronic control Job memory Automatic sheet change Lap opener Mechanical opening Colour touch screen Maximum sheet size 510 x 320 mm - 150 x 75 mm 10 x stitches Speed : 180 cycles per minute

BN 102 C Producer Tos Swing 280 mm Distance between centres 630 mm Cross table adjustment 250 mm Longitudinal table adjustment 510 mm Vertical milling head adjustment 290 mm Machine weight 1000 kg

4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø300 mm Table dimensions: 170 x 420 mm Grinding table inclination: 0° – 45° top + bottom Motor power: 0.75 kW Motor speed: 1,500 min-1 Clockwise and counterclockwise rotation Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø60 mm Weight: 27 kg Optional: - Angle stop - Cylindrical grinding device - mobile machine stand Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If you have any questions, please  ...

table diameter:500 mm total power requirement:3 kW weight of the machine ca.:2 t dimensions of the machine ca.:2300 x 1270 x 2200 mm

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø400 mm Table dimensions: 225 x 550 mm Grinding table inclination: 0° – 45° top + bottom Motor power: 1.5 kW Motor speed: 1,500 min-1 Clockwise and counterclockwise rotation Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø80 mm with angle and parallel fence Weight: 55 kg Optional: - Angle stop - Cylindrical grinding device - mobile machine stand Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If y ...

groove width:1,5 , 12, 14 mm total power requirement:380V, 50Hz, 32A, 15 kW weight of the machine ca.:5,6 t dimensions of the machine ca.:4000 x 750 x 1300 mm

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø600 mm Table dimensions: 320 x 830 mm Grinding wheel inclination: +/- 30° Motor power: 1.5 kW Speed: 940 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø100 mm Oyrkh with angle stop with engine brake Weight: 240 kg Optional: - digital angle display - Machine light - Table extension: 170 mm Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not h ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø900 mm Table dimensions: 450 x 1,200 mm Table extension: 300 mm Grinding wheel inclination: +/- 30° Motor power: 4.0 kW Speed: 600 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø150 mm with angle stop with engine brake Weight: 460 kg Optional: - digital angle display - Machine light - Table extension: 170 mm Price plus VAT, which will be shown separately on the invoice. If you have any questi ...

First commissioning: 2016 Control: Heidenhain iTNC 530 incl. handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 min-1 Torque: 95 Nm Tool holder: HSK 63A Tool tensioning: hydraulic Coolant supply: outside and inside Blowing air: Outdoor Drives Linear axes Feed speed X-, Y-, Z-axis: up to 60 m/min Axle acceleration X-, Y-, Z-axis: up to 5 m/s2 Connection data Connected load: 190 kVa Fuse: 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Colour Housing, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green  ...

max. wheel diameter:180 mm

Register punch EUROTRON IND-XR 500, year of construction 2004, serial number S1-2004-1, with adjustable X-axis and Y-axis see result Photo of test, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome, by prior appointment, to visit the machine in our house.

Very robust and compact 1-fold eyelet machine, electric table unit in top condition. Designed for 5.5 mm eyelets. Stock goods, immediately available.