126,611 used machines on RESALE, but how to find them? Machine Search
Used Bag-in-Box GANDRA TEC 500+ : 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit juices, vegetables, wines, etc. Supported packages: 3L, 5L, 10L, 20L. Bag Entry It is done automatically from the tape or manually. Vacuum generation and nitrogen input after pouring are standard. Equipped with a bag counter and a liter counter. Picking up the filled bags into the machines is done manually. Manufacturer: Gandra Model: TEC 500+ Year of manufacture: 2017 Recently, she poured NFC apple juice Capacity: Up to 500 bags with a capacity of 3 liters per hour • 400V/50Hz power supply; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW
J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...
2 mobile filling machines, manufacturer unknown, function untested! Auction-ID: A7-45677-54
consisting of: Filler Cimec America with 24 filling valves, with double pre-evacuation Crowner Arol Esse with 4 closing heads
Pieces of dough: 10-300 gr. Power: 10-60 pieces/ min digital control Stainless steel cladding rollable on rolls
Sheet filter, Plate Filter Type FP 430 on rolls for beer, wine, juice etc. Manufacturer: KTM-Troxler Type: FP 430 30 plastic filter plates DN 25 outlet at bottom with butterfly valve Filter plate size: 40 cm x 40 cm – with fittings complete
Used Apag SRV20 rotary / vacuum filter. - 20m2 filtration area - Filter drum diameter 1721mm - Length of filter drum 3750 mm - Rotational speed of the filter drum 0-9 r.p.m. - Vacuum pump capacity 450m3 / h - Extraction pump capacity 36m3 / h - Feed pump capacity 36m3 / h - Air consumption 1 Nm3 / h - Water consumption by a 1 m3 / h vacuum pump - Washing water intake 50-80 1 / m3 - 2.2 kW filter drum power consumption - Power consumption of the cutting knife cutting 0.18kW - Power consumption of the 11kW vacuum pump - 2.2kW feed pump power consumption - 3kW extraction pump power consumption - 1.1 kW coadiuvante mixer power consumption - Acid resistant design. - Weight 4300 kg. - Year of construction 2002. - Manufacturer's documentation.
Sheet filter, Plate Filter Seitz Orion 60 x 60 for Beer, Wine, Juice With 23 stainless steel plates 60 x 60 cm With 56 x PVC filter plates 60 x 60 cm With 4 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1680 mm Width: 3500 mm Length: 820 mm Weight: 1350 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²
Sheet filter, Plate Filter Seitz Orion Type 60A100 for Beer, Wine, Juice Manufacturer: SEITZ Orion Type: 60A100 No.72044 Year of production: 1975 With 98 x PVC filter plates 60 x 60 cm With 4 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1690 mm Length: 4200 mm Width: 1300 mm Weight: 1650 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²
Recommended as a line with PT 8, closure applicator TCAP ReCap 2 and packer TCBP 62. The 1000 Base format is Tetra Pak's classic one-litre brick format. This TBA 8 offered here is from the V100 development stage. Like all of our Tetra Pak machines, this line is first subjected to a thorough incoming check. After the following cleaning and the extensive examination of the condition, we overhaul the machine with the necessary care. This machine is equipped with a TP MC control system and produces 6000 packs per hour. As with most Tetra Pak machines, we are happy to offer you these with the associated machines for an entire filling line. Regardless of this, we will be happy to advise you in advance and make you an individual offer. Please contact us or schedule a visit to our workshop to see the extensive work for yourself. From our extensive range of machines that we have in stock, we are ...
Sheet filter, Plate Filter Seitz Orion Type 60A150 for Beer, Wine, Juice Manufacturer: SEITZ Orion Type: 60A150 No.72466 Year of production: 1979 With 85 x PVC filter plates 60 x 60 cm With 2 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1180 mm Length: 4100 mm Width: 950 mm Weight: 1650 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²
TBA 19 machines have been developed for the filling of compact formats. The 250 milliliter Slim format is one of the most requested volumes. In this format, the system is used for many types of products. Before and during the repair work, we constantly check the condition of all existing parts and, if necessary, replace them before reassembling the machine. After extensive work in our workshop, we test all machine components intensively. Our aim here is the smooth interaction of all machine groups up to the finished product. These tests at the end of the technical work are particularly important for the later use of the machine. We can find existing errors in the system and fix them before the next production use. TBA 19 machines are available in different development stages. We will be happy to explain the extensive steps to make the system operational again for you. On request, we ca ...
Type of machine: Semi-automatic dosing machine for loose products Portion: up to 2000g (2l) Accuracy: +/- 5g (available option +/- 1g) Power: 230V, 1 phase Emptying: foot-lever Material: food grade stainless steel Hopper volume: 120l (ca.50kg of roasted coffee) Dimensions(H x W x L): 1808mm x 751mm x 743mm LR 2.3 is designed for dosing such products as: coffee beans, nuts, seeds, grains, rice or noodles. The device is working in half-automatic mode. The operator pours the material to be portioned into the main container, then sets the desired weight and starts the dosing process. After weighing the required amount the operator puts a bag under the funnel and empties the weighing container by stepping on a foot-lever. The next charge starts automatically after the weighing container is emptied. In the meantime the operator ha ...
Semi-automatic tube filling and sealing machine for PE, laminate and metal tubes, demonstration machine Capicity 10-20 tubes / min. Filling range from 5-250ml Tube sizes from D.13.5 - D.50mm with different format sets Ultrasonic sealing unit
Monobloc filling and sealing machine incl. feeding turn table Filling range 5-30ml Container sizes D.20-35 - H.50-80mm Capacity max. 15-30 pcs. / min.
TBA 19 machines have been developed for the filling of compact formats. The 250 milliliter base format is one of the most requested volumes. In this format, the system is used for many types of products. Before and during the repair work, we constantly check the condition of all existing parts and, if necessary, replace them before reassembling the machine. After extensive work in our workshop, we test all machine components intensively. Our aim here is the smooth interaction of all machine groups up to the finished product. These tests at the end of the technical work are particularly important for the later use of the machine. We can find existing errors in the system and fix them before the next production use. TBA 19 machines are available in different development stages. We will be happy to explain the extensive steps to make the system operational again for you. On request, we can ...
1 used filling line for ironing bottles. Original in use for filling beer (2C) in 330 ml printed glass bottles (diameter 60 mm x height 230 mm) with handle closure, with a capacity of 1,900 bottles/H. Additional format parts for 500, 750 and 1,000 ml bottles. E- connection 415V/50Hz. System has run very little and is in top condition! Consisting of: Task table, with 5 rows of stainless steel chains. Stainless steel frame, with inliner and adjustable drive. Built 2006. 1 bottle transport system for empty and full bottles. Stainless steel chain on stainless steel frame. Built 2006. 1 Rinser/Filler Monobloc, Make Cime Careddu (Italy), Type DPS 9-8, built 2006, 9-head rotating Rinser, no-bottle/no-spray, 8-head rotating back pressure filler with 2x pre-evacuation (built-in vacuum pump). Heights adjustable. Min/max bottle diameter 50 - 90 mm, min/max bottle height 180 - 350 mm. Drain CIP. Wi ...
Designed as a machine for smaller formats, the 19 200 Base is capable of producing 7500 packs per hour. It is suitable for filling different products. Preferably, aseptic products are filled in the machine, which are previously fed into the filling line via a UHT or a pastorizer for preservation. Subsequently, it is possible to equip the filling machine with different downstream equipment. You are welcome to contact us to find the right selection for your requirements. We are also happy to support you in the planning and implementation of the necessary conveyor belt systems to connect the individual machines as a line. All machines undergo extensive technical work before they are put back into operation, which we always carry out in our workshop. In the end, there are always tests to be fully verified. These tests guarantee the perfect condition of the machine for the customer. On reques ...
Designed as a machine for smaller formats, the 19 200 Base is capable of producing 7500 packs per hour. It is suitable for filling different products. Preferably, aseptic products are filled in the machine, which are previously fed into the filling line via a UHT or a pastorizer for preservation. Subsequently, it is possible to equip the filling machine with different downstream equipment. You are welcome to contact us to find the right selection for your requirements. We are also happy to support you in the planning and implementation of the necessary conveyor belt systems to connect the individual machines as a line. All machines undergo extensive technical work before they are put back into operation, which we always carry out in our workshop. In the end, there are always tests to be fully verified. These tests guarantee the perfect condition of the machine for the customer. On reques ...
consisting of: 12-head rinser 12-head long-tube beer filler 4-head crown corker capacity: 2200 bph
Pressure Bottle Filler. 24 fillers. System FALSCH FLASCHEN. Whole machine made in inox. Machine after total renovation in 2019. Warranty: 24 months.
used
Bertolaso Athena 75/15 Vacuum filler Bertolaso Year: 1991 with 75 filling valves and 15head aluinium screw capper Running direction: left to right
Exhaust filter diesel particulate filter cleaning system for free burning of clogged particulate filters. Consisting of heating element and control. Nh7p9 Connection 400 Volt Power 9,000Watt
Pass height max mm: 2000 Battery: 24V Chargers: automatic and high-frequency Automatic reading of the charging height: Reflective light barrier Total power: 0.75 KW
Fan filter, fan array, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3151 -Fan: 230 V 19 W -Dimensions: 205/205/H105 mm -Weight: 1.1 kg
Fan filter, fan array, air cooler, control cabinet fan, filter fan, server blower, server fan -Manufacturer: Arctic, Server cabinet fan with housing -Type: F8 915 -Voltage: 12 V -Number: 4 fans included -Price: per piece -Dimensions: 500/280/H90 mm -Weight: 1.7 kg/pc.
Manufacturer: Hamba Maschinenfabrik GmbH Type: 2400 Y.O.M.: rebuilt by Grunwald 1993 Capacity: up to 2400 Bech./h (depending on the product) lanes: 1-lane, 12-plate Filling: semi-liquid products such as cream cheese, yoghurt, cream, ayran etc. Filling volume: 100 - 500 ml , adjustable Cup size: round, 95 mm Type of closure: aluminium board, sealing Connection values: 380 V, 50 Hz, 1.7 KW Outlet conveyor included Optional: Machine overhaul possible
Fan filter, fan array, air cooler, control cabinet fan, filter fan, server blower, server fan -Manufacturer: NMB, Control cabinet fan server fan with housing -Type: BG0903-B044-000 -Voltage: 12 V -Number: 8 fans available -Price: per piece -Dimensions: 500/280/H90 mm -Weight: 1.9 kg/pc.
Filling & Packaging Line for Condiments Main equipment: - Kugler piston filler – filling machine for viscous products (horseradish, sauces) - Jar closing machine (Effe Elle) – sealing of glass containers (twist-off caps) - Bottle rinsing machine (NOVOPACK) – cleaning/preparation of containers - Jar unscrambler / separator – feeding and orientation system for jars - Conveyor system (T1) – product transport and line integration Highlights: Complete industrial processing line for condiments Suitable for mustard, horseradish, sauces, and similar products Food-grade stainless steel equipment Integrated workflow: cleaning → filling → closing → transport Machine details: 1. J. Kugler & Co. GmbH K24R – Piston Filling Machine Year: 1994 Serial number: 15382 Dimensions: approx. 2500–2600 x 1500–1600 x 2800–3000 mm Weight: approx. 1200–1300 k ...
mounted on a stainless steel base frame due to the completely pneumatic control (without electrics) suitable for filling disinfectant, Piston stroke: 5 ltr. - that means two filling operations for one 10 litre canister capacity: approx. 150 - 10 ltr. canister / h
GAI vacuum filler + 1 screwdriver head Capacity: 18,000 b / h - 20 ml, 12 fillers
with 16 filling valves and 1-head aluminium screw capperfor 28 mm closures capacity: approx. 2,000 fl./h running direction: left - right product: Juice (hot filling) with stainless steel control cabinet
Manufacturer: Pall Model: Sfg Type: SFG7314GF100 Number of candles: 31 x 30" or 40" (code 07) Enclosure contents: 291 ltr. Material: Stainless steel 316L / 1.4404 Pressure: 0 - 10 bar Temperature: 0 - 140° C Built: Ultimate purpose: 1989 Brewery / Beer Candles hanging, approx. space requirement BXTXH, 600 x 600 x 1,870 mm
used
Auction-ID: A1-42014-289
Dust filter system / Industrial Dust Collector – galvanizing plant – complete with fan & control Description (EN): For sale is a used industrial dust filter system that was used in a galvanizing plant to reduce emissions. The plant is robustly built and suitable for continuous operation. Scope of delivery: - Dust filter system (complete unit) - Fan / fan - Electric motor - Control / control cabinet - Piping (optionally to be dispensed) Condition: - Used, last functional in use - Filter elements must be replaced - Usual signs of wear (see photos) Important notes: - Self-dismantling and pick-up by buyers required - Sale without warranty - On-site viewing expressly recommended --- Description: Used industrial dust collection system previously operated in a galvanizing plant for emission control. Heavy-duty construction, suitable for cont ...
Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!
maximum number of results exceeded
please refine your search
1.400 € 
