fiber used for sale

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

Average output 800-1200 kg/h depending on materials and moisture DIAGONAL LOADING BELT Steel structure, side walls,PVC anti-slip belt,1,4 kw motor, Dimensions: 850×6000 mm. AGGLOMERATOR D1300 Steel barrel diameter 1300 mm. Main motor 250 kw (available with 300 kw motor on request) Replaceable inner steel lining Side door for inspection and blades replacement, Sucking vent for steam extraction Oleodynamic power station 0,75 kw with electrovalve which controls opening of unloading door.water loop cycle for cooling hub bearings belt. Electrical cabinet Dimensions: L mm.3950, W.mm.2.280, H. mm.4652. DISCHARGING HOPPER Diagonal, engine moved auger for material extraction (1,1 kw) Discharging height 830 mm from ground Depressure pipe inspection window safety inner grid Appx dimensions : 1000×1500 mm. Auger diam.180 mm. The line is offered reconditioned. Complete with electrical drawings and  ...

The Prussiani Engineering Rio 5 waterjet cutting machine has a cutting size of 4000 2000mm, in 3 axes. The maximum cutting thickness is up to 200 mm. The waterjet cutting machine is used to cut materials such as glass, marble, steel, various metals, leather, granite, stone, rubber, fiberglass, artificial materials.

-Lasercleave System for single step polishing -Integrated Camera & external Monitor for process Control -Touch panel integrated - Adapter for 2.5mm and 1.25mm PC Connectors -Extraction System for cutted fibers including filters -Aircooled Laser Purchased as seen, fully functional Advance payment when ready for shipment The price does not include VAT. Pick-up and delivery available Shipping costs will be invoiced separately and due in advance.! Viewing possible by telephone arrangement !

The biconical type mixer makes a homogeneous mixture of solids. The mixing process is a common operation in manufacturing for the health, food, chemical, cosmetics, detergents, fertilizers and plastics industries. Some examples are pharmaceutical granules, flour semolina, seeds, starch, coffee beans and ground coffee, cocoa, chocolate flakes or granules, powdered milk, baby food, preparations for making dehydrated creams and soups, foliar waxes, granulated detergents, soap flakes, artificial fertilizers, powdered plastics or shredded, plastic pellets and fiberglass, etc. The Bicono mixer for solids has a rotating biconic drum that rotates at low speed, making the product slide smoothly along its smooth interior walls, making the product unforced. Characteristics: Repetitive, reproducible and scalable mixes. Low maintenance mixer. Extreme ease of cleaning. Total emptying of  ...

Used Filling Monoblock Galdi Up to 6000 BPH Introduction to Advanced Bottling Technology Initially the Galdi RG260A a high performance filling monoblock from 2010 stands as a cornerstone of modern bottling operations Having been recently overhauled it showcases unmatched efficiency and reliability Consequently achieving speeds of up to 6 000 bottles per hour this machine sets a benchmark in the industry Specifically it is engineered for Pure Pak Daimond Standard Curve B style T Bottom containers Moreover it utilizes 36mm Elocap caps demonstrating its versatility and adaptability to various packaging needs Ensuring Uncompromised Product Safety of the Filling monoblock Galdi Importantly one of the critical aspects of the Galdi RG260A is its disinfection killing rate With up to LOG5 it guarantees the highest levels of product safety This capability is especially crucial in today s market wh ...

On and off when needed Low maintenance costs (no discs, just knives which can be re-sharpened) No need to reduce size, on most scraps. Suitable for film + foam + fibers, moisture and some contamination are well tolerated. Best degassing in the process, compared with other systems. Remote assistance through modem Agglomerator with barrel diam. 1500 mm.,LxWxH 4,3 x 2,3 x 5,050 mt. 570 kw , installed power about 370 kw in work Steel cylinder case with inspection door, Side opening panel for inspection and replacing blades Power switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam vacuum vent 4 kW Discharging hopper complete with 200 mm diam. diagonal auger for agglomerated material 1,5 kW drive.size Z x ...

GUILLOTINE REEL SLITTER, - These reel splitters are particularly recommended to reduce the size of scraps before a further recycling process. They are ideal for paper, plastic, fabric, rubber, polylaminated, AL foil, in the shape of REELS, BALES, LOOSE MATERIAL, FIBERS, and more., - Proposed in different standard dimensions and cutting forces, or bespoke to project, these machines feature a sturdy steel structure, top quality components and are constructed according to the strictest EU regulations to perform at their best and keep their value in the years with the simplest maintenance., - Sturdy and reliable, these guillotines give excellent performances even on lower tonnage, for paper and plastic film reels., - with increased speed system, our guillotines can double the work done, compared with other models., - One operator is needed to work in full safety conditions: 2-hands operation ...

With the Bucher press, you can automatically link the 4 phases of a complete cycle: filling, pressing, emptying, washing. • 25% greater efficiency • Personnel gain • Mastery of your process. The press adds to the important drainage function, particularly useful for fresh, pumped over, crushed, destemmed (vintage) grapes... In addition, they are equipped with automatic filling: only one loading point and automatic division of the grapes in the cage . With fresh, crushed or destemmed grapes, more than 75% must can be obtained with just the filling action. They mainly consist of a slightly inclined cylindrical cage (made of laminated polyester resin and fiberglass), in which two plates move on a central screw. Depending on the direction of cage rotation, the plates move closer (compression) or move apart (decompression). Depending on the type of grape, 3 or 6 compressions will be p ...

Technical data shredder: Manufacturer Vecoplan AG Type VAZ 1300 M FF T Year of construction 2014 Operating hours 3,033 hours Drive type HiTorc drive Drive power 90 kW Speed variable, 0 up to 360 rpm Rotor length 1,295 mm Rotor diameter 370 mm 35 cutting crowns 40 x 40 mm Machine dimensions without hopper 3,170 x 2,365 x 1,500 mm (l x w x h) Weight 6.4 tonnes Application description of the manufacturer: The VAZ 1300 M FF Rotary Shredder with the SureCutTM Cutting System is designed specifically for single-stage reduction of plastic films and synthetic fibers being reclaimed for extrusion. The FF Series is built for high throughput, has built-in metering capabilities and thermal monitoring controls. Benefits of the SureCutTM Cutting System include precise cut lengths and high bulk densities. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspec ...

Brush grinding machine Brand: Ecoline Type: B Sand 5 New machine The B Sand 5 as a high-quality solution for your production. The individual equipment offers many possibilities. In addition to panels and profiled doors, sash surfaces can also be processed, for example. A perfect result for different types of materials and surfaces: - Solid wood, MDF, veneered parts... - impregnated, primed surfaces... Technical data: Workpiece dimensions: Min. length: 550 mm Min. thickness: 10mm Max. Width: 1550 mm Max. Thickness: 120 mm Power: 11 kW Air pressure: 6-8 bar Suction nozzle: 6 x Ø120mm unit - vertical swiveling brushes for grinding the edges. diameter 400mm per brush, 2 motors á 1,1 kW - Horizontal sanding lamellar roller diameter 420mm, length 1600mm, 3 kW motor - Cross brush for sanding the wood fibers diameter 40mm, 1,5 kW motor - 2 round b ...

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0