We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,812 used machines on RESALE, but how to find them? Machine Search
used
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 30 t Year of construction: 2003 Screw diameter: 18 mm Spec. Spray pressure: 2500 bar Clamping unit: 300/... Clamping force: 30 t Lights spar spacing: 300 x 300 mm Aperture travel: 250 mm Max. plate spacing: 330 mm Ejector travel: 140 mm www.europnet.eu
used
Ferromatik K140-S Injection moulding machine Year : 1997 Weight : 9300 kg clamping force : 1400 kN voltage: 230 motor outputs power : 44,7 kW minimum moulding size in mm : 200 mm mould opening size : 750 mm (950 mm) tie bar distance : 500 x 500 mm maximum produce parts with a shot size 254 ccm / 216 gramm oil to fill in : 400 l hours of Production : 137,000 working Condition : good special features : 2 pcs. hydraulic core pull 4 pcs. air valves hot runner 16 zones color feeder connectivity option
used
Closing unit Clamping force [kN] 10000 Dimensions of mounting plates (hxv) [mm] 2000 x 1605 Clearance between columns (hxv) [mm] 1550 x 1200 Min./max. mold height [mm] 500 / 1300 Maximum opening width [mm] 2400 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2799 Injection weight [g] 2407 Injection pressure [bar] 2300 Electrical and hydraulic equipment Rated power of the pump motor [kW] 150 Heater power [kW] 44.1 Dimensions and weight Net weight with control cabinet [t] 52000 Dimensions (length x width x height) [m] 10.45 x 3.18 x 2.82 Injection molding machine included with the Apex robot
used
Closing unit Clamping force [kN] 2750 Dimensions of mounting plates (hxv) [mm] 970 x 970 Clearance between columns (hxv) [mm] 630 x 630 injection unit Screw diameter [mm] 60 Injection volume [cm3] 763 Injection weight [g] 694 Injection pressure [bar] 2144 Dimensions and weight Net weight with control cabinet [t] 15.5 Dimensions (L x W x H) [m] 7.5 x 2.2 x 2.7 m
used
Clamping/injection matrix Clamping force [kN] 2750 Mounting plate dimensions (hxv) [mm] 970 x 970 Clearance between columns (hxv) [mm] 630 x 630 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 763 Shot weight [g] 694 Injection pressure [bar] 2144 Dimensions and weight (approximately) Net weight with control cabinet [t] 15,5 Dimensions (L x W x H) [m] 7,5 x 2,2 x 2,7 m
used
This FERROMATIK Magna T (MTs) - 275 Injection Moulding Machine was made in the year 2018. It has a clamping force of 2750 kN and a column spacing of 660 x 660 mm. Max. plate distance is 1560 mm and mould installation height 400 - 950 mm. The opening stroke is at 610 mm. This injection moulding machine is equipped with a ENDURA touch control and a 1540 injection unit with 50mm screw diameter. It comes with 2x hydraulic core pullers (2-fold). See full original tech specs as PDF (DE) attached. Automation solution can be purchased additionally upon request.
used
This FERROMATIK Europe Elektra 300 Injection moulding machine was made in the year 2009 in Germany and has 58222 production hours. It is equipped with a Ferromatik-Multi-Mikroprozessor control unit. The machine has a clamping force of 3000 kN.
used
This injection moulding machines was manufactured in 2001. The Ferromatic K-Tec 350 S/2F is known for its robust performance and reliability, suited ideally for a variety of injection moulding applications. If youâre considering enhancing your production capabilities, the Ferromatic K-Tec 350 S/2F machine we have for sale could be an excellent fit. Contact us for more information.
used
Description: Injection unit: Size 1636, , Ferromatik multi-microprocessor control, , Screw diameter 60 mm, , Column spacing 730 x 730 mm, , Clamping surface approx. 640 x 640 mm, , Incl. handling robot, , Travel paths X approx. 1400 x 900 mm Attention! The fixed collection date for this item can only be individually communicated by the logistics department after the end of the auction and beginning of the dismantling work. Crane loading! Approx. Onsite Dimension. (l x w x h): 8,000 x 2,000 x 2,400 mm, weight approx.: 12,000 kg
used
PVC production line Screw diameter 55 mm. Main motor power 37 Capacity(kg/h) 100-150 Kg/h Effective length of screw(mm) 1050 Equipment Content : No. Description Quantity 1 twin-screw extruder 1set 2 vacuum calibration tank 1set 3 haul-off&cutter 1set 4 stacker 1set
used
Manufacturer Ferromatik Type Milacron Elektra 100 S Control Built in 1997 Closing unit Closing force t 100 Opening path mm 920 Holm size mm 470 x 470 Installation maximum min/max mm 250/520 Plate size 690 x 690 Spraying unit Screw diameter mm 45 Spray volume cm3 254 Spray weight gr 227 Spray pressure bar 2000 Mass and weights Dimensions LxWxH m 7.6 x 1.8 x 2.2 Machine weight Kg 6930
used
Manufacturer Ferromatik Type Milacron Elektra 100 S Control Built in 1997 Closing unit Closing force t 100 Opening path mm 920 Holm size mm 470 x 470 Installation maximum min/max mm 250/520 Plate size 690 x 690 Spraying unit Screw diameter mm 45 Spray volume cm3 254 Spray weight gr 227 Spray pressure bar 2000 Mass and weights Dimensions LxWxH m 7.6 x 1.8 x 2.2 Machine weight Kg 6930
used
Stock# U2415-1 Used stainless steel conical mixer by Hosokawa Milacron model DBXE-300R. Total volume 798 l, working volume 300 l. Mixer has top mounted stainless steel unsupported mixing screw, driven via gearbox and el. motor 2.2 kW. Rotating arm is designed in carbon steel and is driven via gearbox and el motor 0.18 kW. Bottom central discharge via outlet with diameter 200 mm and manually operated slide valve. Machine is mounted on three carbon steel legs and is equipped with local control panel. Last time machine had been working in food industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.
used
SABER 750 milling machine Machining range: X=760mm Y=510mm Z=510mm Spindle speed - 80 - 8 000 RPM Spindle taper: BT 40 Tool magazine - 20 items Controls: Acramatic 2100 High pressure system through the spindle Remote control
used
Conical twin screw extruder Drive: DC 9kW motor heating zones: cylinder - 3, head - 3 cylinder cooling - oil
used
Milacron Elektron EE75-450 Electric injection moulding machine From 2011 Machine is in running condition.
used
Tip width/grinding length: 1000/1075 mm Gr. Grinding diameter: 250 mm Table swivel: +/- 8° Gr. Table longitudinal movement: 1210 mm Workpiece spindle stick swivel: 0 - 90° Spindle bore/cone: 38 mm/MK 5 Grinding spindle stick easily swivelling Hydr. Quick adjustment approx.: 50 mm Grinding wheel dimensions: 400 x 50 x 127 mm 2 grinding wheel speeds due to V-belt step disc Drive power: 3 kW Space requirement: 2900 x 2200 x 1750 mm Weight: approx. 3.5 t
used
Voltage: 220-380V, without documentatio
used
Clamping force: 750kN, injection pressure: 1730bar, motor power: 15kW, stroke volume: 116cm³, operational hours counter: 19,802h, with tools.
used
Drilling capacity: 0 mm Number of drilling units: 0 Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Technical data Number of drill-heads: 2 Drill capacity: 10 mm Table length: 1040 mm Table width: 350 mm Spindle speeds: number (steps): 10 from: 660 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 350 kg Overall dimensions machine: Length: 1150 mm Width: 550 mm Height: 1700 mm Various accessories: Drill chuck: 0.5 - 10 mm Adjustable depth stop
used
Injection pressure: 2057bar, clamping force: 3500kN, heating output: 30.7kW, weight: 16.4t, operational hours counter: 62,600h.
used
Clamping force: 3000kN, screw diameter: 50mm, stroke volume: 471cm³, heating output: 30kW, length: 7100mm, width: 2200mm, height: 2600mm, weight: 16.8t, operational hours counter: 58,222h, with documentation.
used
CLAMPING FORCE: 200TON PLATEN SIZES: 810 X 810MM D.B.T.B: 570 X 570MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 510MM MAX DAYLIGHT: 1220MM EJECTOR STROKE: 150MM SCREW DIAMETER: 45MM INJECTION PRESSURE: 2300BAR STROKE VOLUME: 382CM3 SHOT WEIGHT (P/S): 348GR CONTROLS: MOSAIC MOTOR: 32KW HEATING CAPACITY: 16.6KW SCREW DRIVE: ELECTRIC CORE PULLING: 2 AIR VALVES: 2 ROBOT INTERFACE: EUROMAP 67
used
Key data: 60
Extrusion line for the manufacture of forest protector 90 mm composed of: - Extruder 1 spindle brand: Flag, 60 mm Ø 25 L/D, motor: 37 Kw (50 hp). With variable speed drive, electrical panel and stainless hopper with master dispenser. - Stainless steel cooling tub: 2 m with 2 vacuum pumps: 4 Kw (5.5 hp) each. - Towing trolley: 1300x130 mm, brand: Cincinati Milacron, engine: 5.5 Kw. - Die-cutting machine and shear with hydraulic group: 4 Kw (5.5 hp), tank: 75 liters.
used
Two-station machine for tanks up to 10 ltr, 2 x 5 ltr, 4 x 2 ltr. with 2 extruders 90/24D, leak testing in the machine, bottle removal with lowering function. Screen in German and English
used
Key data: 510 mm, 510 mm, 510 mm
Inv. Num. : 7409 Type: ARROW 500 Producer: CINCINNATI MILACRON Created: 1996 Parameters: Control system: ACRAMATIC A 2100 Number of stacking positions: 21 Work table length: 700 mm Work table width: 520 mm Maximum table load (uniform): 350 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: CAT 40 Machine height: 2650 mm Machine length: 2700 mm Machine width: 2000 mm Machine weight: 3050 kg Equipment: Tool Holder
used
accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice
used
turning diameter: 360 mm turning length: 400 mm control: Acramatic 2100 total power requirement: kW weight of the machine ca.: 3000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.