We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,244 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
Type V-380 Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video abcs://youtu.be/xZFPl9-vHtg
new
Type V-180 Number of wheels(pcs) 1 Wheels diameter 200 mm Wheels width 40 mm Feeding rate 0,9¬21,2 (A25B40) Motor power 0,75 kW Machine frame - Cast aluminum Transport dimensions 632x332x222 mm Weight 20,1 kg Video: abcs://abc.youtube.com/watch?v=dfsFa6y4sv0&feature=youtu.be
used
Built in 1998 Size max 205 x 130 x 30 mm min 35 x 50 mm Product weight max 1-300 g/qm Speed max up to 200 c/min; working condition
new
Wheel diameter 120 mm Wheel width 60 mm Wheel diametre hole 35 mm
used
Bundle/Stream feeders Built in 2001; working condition
used
Bolt feeders Manufacturer: Tucker Type: BV 50D.00.44/5.18F8 and BV 50D.10.01/5(12-25) There are 2 pieces. The price is for 1 PCs.
used
Working size: 1,000 x 1,500 mm, on base frame, without drive
used
used
used
used
Manufacturer: OKU Type: VZ 750 K-R Plate diameter: 750 mm Adjustable vibration
used
IEMCA model 33 lathe bar loader
used
turning diameter: 60 mm turning length: 200 mm number of slides: total power requirement: 20 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
diameter: 35 - max. 65 mm Guide channels: 6 control: SPS max. bar length: 3.200 mm bar material dia.: min. 35 mm bar material dia.: max. 65 mm total power requirement: 2 kW weight of the machine ca.: 2,0 t dimensions of the machine ca.: 4,0 x 1,1 x 1,6 m Multi-Channel-Bar-Feeding-System BREUNING IRCO - 65.6 196.6 - has been installed at a Mori Seiki ZL 200 SMC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 0 mm plate thickness: 0 mm plate length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
OVERHAULED - Size: 1.600 x 1.200 mm - 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. - 3,7 / 2,15A) Unbalance Motors - Rubber protection
used
UNUSED - Size: 1.250 x 900 mm (Stainless steel) - Magnetic Vibrator: MV E (3 kW / 1.500 U/min) - With Tyristor controller
used
Size: 1.300 (1.250) x 650 mm - MA220 (380V. / 16A. / 0,6 kW) Magnetic vibrator - With steel wear plates - Included Thyristor controller
new
UNUSED - Size: 980 x 2.200 mm - Unbalance Motors: 2 Pcs. Friedrich FT 95-4-2.2 (1.750 RPM / 0,6 kW) - Stainless steel through - Included: Frame and Rubber springs
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 6 mm up to: 80 mm Length of bars min.: 130 mm Length of bars max.: 1500 mm Bar weight max.: 67 kg Loading time: 4 - 12 sec Feed range max.: 100 m/min Push force max.: 167 Nm Voltage 50 Hz 3x: 380 Volt Compressed air from: 5 bar Machine´s weight about: 600 kg Overall dimensions machine: Length: 2050 mm Width: 1800 mm Height: 1700 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 2 mm up to: 28 mm Length of bars max.: 4000 mm Execution: Barrel Oil feeded / flushed Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 400 kg Overall dimensions machine: Length: 4800 mm Width: 985 mm Height: 1500 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 5 mm up to: 42 mm Length of bars max.: 3200 mm Outstanding length min.: 530 mm Feed range: 0 - 400 mm/s Max. Feed force: 550 N Voltage 50 Hz 3x: 400 Volt Power: 1.5 kW Compressed air from: 6 bar Overall dimensions machine: Length: 4700 mm Width: 915 mm Height: 1200 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 1 mm up to: 12.7 mm Length of bars max.: 3200 mm Outstanding length min.: 70 mm Execution: Barrel Voltage 50 Hz 3x: 440 Volt Overall dimensions machine: Length: 5000 mm Width: 400 mm Height: 1200 mm Various accessories:
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 3 mm up to: 32 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 3 mm up to: 36 mm Length of bars max.: 3200 mm Overall dimensions machine: Length: 4000 mm Width: 500 mm Height: 1500 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 2 mm up to: 12.7 mm Length of bars max.: 4000 mm Overall dimensions machine: Length: 4500 mm Width: 1160 mm Height: 1200 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up up to: 32 mm Length of bars max.: 3000 mm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 900 kg Overall dimensions machine: Length: 4000 mm Width: 800 mm Height: 1700 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 3 mm up to: 32 mm Length of bars max.: 3000 mm Overall dimensions machine: Length: 500 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 6 mm up to: 32 mm Execution: Barrel Oil feeded / flushed Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 400 kg
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 5 mm up to: 65 mm hexagon up: 5 mm up to: 56 mm Length of bars max.: 3750 mm Execution: Horizontal Voltage 50 Hz 3x: 200 Volt Power: 2 kW Machine´s weight about: 1450 kg Overall dimensions machine: Length: 5840 mm Width: 732 mm Height: 950-1100 mm
used
MACHINE 2012 MODEL IN WORKING CONDITION, JUST CHANGE MATERIAL, SOMETIMES HANGING AT PART CHANGE, IT IS IN EXCELLENT CONDITION WITH A LITTLE MAINTENANCE. FOR LATHES
new
Roles: 4; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: variable 3 - 18 m/min.; Tripod selectable: Supplied without tripod / optionally the following tripods are selectable: Standard / 1050 / PLUS with counter; Motor power: 0.75kW;
used
Technical data Bar diameter round up: 3 mm up to: 25 mm Length of bars max.: 3200 mm Voltage 50 Hz 3x: 400 Volt Overall dimensions machine: Length: 4000 mm Width: 600 mm Height: 1600 mm
used
LNS SUPER HYDROBAR BARFEEDER FOR SALE ! VERY GOOD CONDITION - LIKE A NEW ONE WITH A BRAND NEW HYDRAULIC SYSTEM
used
Technical data Bar diameter round up: 3 mm up to: 20 mm possible with equipement Length of bars max.: 3270 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 5270 mm Width: 1000 mm Height: 1300 mm
used
Technical data Bar diameter round up: 6 mm up to: 45 mm Length of bars max.: 2000 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 2400 mm Width: 500 mm Height: 1500 mm
used
automatic loader year 2003, max diameter ø 60/65 mm, bar L = 3000 mm, available and visible
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 MACH-id 5059 MAKE FMB TYPE TURBO 5 - 42 YOP DIMENSIONS Length 6000 mm Width 1000 mm Height 1600 mm
used
Bearing number: 3685 LOADER Manufacturer: Top Automazioni , Type: 337SX Machine NO.: BRS13122782 RE-S, Year of construction: 2013 Specifications: Stang dia. 6-37 mm rod length 3200 mm Length: 4500 mm, Høhe: , Width: , Weight: 1300 kg
used
Used Top Loader for 3000 Monoplane Bars Used machine visible in Italy, sold as it is
used
Capacity: For bars from 5 to 42mm Maximum length: 4400mm Hexagonal bar diameter: 4.4mm - 36mm Storage capacity: 28 bars of 10mm diameter Advance speed: 750mm/sec. Return speed: 800mm/sec.
used
Due to non-use, like new condition. Length max bars 3000 mm Ø max bars 50 mm Multiple spindle Automatic loader Price negotiable
used
LNS Quik Load Servo Loader Ready for collection. Model LNS Quik Load Servo Year 2003 Condition Used
used
LNS Quik Load Servo 3 loader Ready for collection Year 2004 Condition Used
used
Index g 200 lathe loader Bar passage 60 Producer INDEX Model MBL Condition Used
used
Delivery ready Located near Brescia northern Italy Regione: Lombardia
used
type L21 80 x 3800 mm - single-storey warehouse Dimensions 4900 x 750 x 1700h mm - Weight 1440 kg Year 2008 Available January 2024
used
Micro feeders in good condition, Agitator, gear motor, 0.12kw - 10rpm, Thread ø 60, slope 45, core ø 17 Painted steel, buffer tank with full detector Dosing capacity at 50 Hz approx. 70 l/h
used
Schutte SD50 multi spindle lathe loader. Machine purchased used by bankruptcy and never used by us. Perfect because he worked only a few years. Purchase in the state in which it is located as we know nothing for any problems never having it turned on. Visibly it is perfect and almost new.
used
Complete overhaul in 2021; equiped with Deutz 4 cilinder diesel engine; loading capacity approx 31./1,7m3; no our or odo meter read out; no registration; does not start(battery empty/defect and ignition switch defective) ; This lot can only be viewed by appointment; make an appointment via administratie@aldel.nl; only on the dates February 14 and 15, 2024