We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,325 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Footprint: 1950x400x760 mm Power: 1.5 kW Weight: 436 kg Dimensions: 1950 x 900 x 1700 mm
used
Sell a conveyor belt from Fördertechnik und Maschinenbau Dip Ing Günther Röwe GmbH that is no longer needed. Strip widths 260mm Length 800mm Drive SEW geared motor I 60:1 VMIN 890/15 Kw 0,18 Nm 48
used
Duplo DSF 5000 digital sheet feeder Year of construction: 2009 Very good condition! At call!
used
Standard
used
daylight 2000 mm working hight 2600 mm setting plane 2 x 1 m
used
- Output: up to max. 30to/h - Motor: 400V, 50Hz - Without electrical equipment Mass: - Length: approx. 2000mm + discharge screw - Width: approx. 1700mm - Height: approx. 1700mm
used
Outer Ø: 310 mm Bore: 115 mm Chuck height with flange: 115 mm Height with clamping jaws 165 mm Clamping bolt spacing 120 mm Bolt D 27 mm- M16 new square safety spanner
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 27150 € : 556.58 € : 0.4 - 2 mm : 600 mm : 1200 mm² : 80 mm : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 4 gear rollers drive. Prevents the separation of the rollers during piloting operation for higher accuracy Remote service module EUCHNER hand wheel Option: Siemens Encoder € 9.110,-- (for higher accuracy and automatic slip comensation - espacially in case of higher feeding speed and thicker material) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 8 Wochen ab Auftragse : Türkei : 23720 € : 469.81 € : 0.4 - 4 mm : 100 mm : 400 mm² : 80 mm : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 4 gear rollers drive. Prevents the separation of the rollers during piloting operation for higher accuracy Remote service module EUCHNER hand wheel Option: Siemens Encoder € 9.110,-- (for higher accuracy and automatic slip comensation - espacially in case of higher feeding speed and thicker material) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 8 Wochen ab Auftragse : Türkei : 25440 € : 521.52 € : 0.4 - 3 mm : 300 mm : 900 mm² : 80 mm : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 4 gear rollers drive. Prevents the separation of the rollers during piloting operation for higher accuracy Remote service module EUCHNER hand wheel Option: Siemens Encoder € 9.110,-- (for higher accuracy and automatic slip comensation - espacially in case of higher feeding speed and thicker material) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 8 Wochen ab Auftragse : Türkei : 26290 € : 538.95 € : 0.4 - 3 mm : 400 mm : 1200 mm² : 80 mm : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 4 gear rollers drive. Prevents the separation of the rollers during piloting operation for higher accuracy Remote service module EUCHNER hand wheel Option: Siemens Encoder € 9.110,-- (for higher accuracy and automatic slip comensation - espacially in case of higher feeding speed and thicker material) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 8 Wochen ab Auftragse : Türkei : 24580 € : 508.81 € : 0.4 - 3.5 mm : 200 mm : 700 mm² : 80 mm : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 4 gear rollers drive. Prevents the separation of the rollers during piloting operation for higher accuracy Remote service module EUCHNER hand wheel Option: Siemens Encoder € 9.110,-- (for higher accuracy and automatic slip comensation - espacially in case of higher feeding speed and thicker material) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Irco Breuning Profimat 100.8340.8 Year of construction: 2001 what installed on an Index G300 (2003). Channels are available from Ø60mm in 5mm increments to Ø100mm.
used
Enveloping feeder Schneider SF 80; shed feeder; good condition; cleaned and tested; Format max.360x360mm, min.100x100mm; .max. Speed. 15000/hr; height adjustable; with delivery conveyor A20. Envelope feeder Schneider SF 80; good condition; cleaned and checked; size max. 360x360mm, min.100x100mm; max.speed 15000/h; adjustable hight; with delivery belt A20.
used
WOOD HER TYPE 1117 built 1983 0.55 / 0.75 kW (380V / 16A plug) 3-rolls (new) 8 speeds 4 / 6 / 8 / 10/ 12 / 15 / 20 / 30 m/min. from location
used
Vibration feeder Manufacturer : Fimotec-Fischer Type: VZ-40-SZ Technical specifications : composed of: Vibration feeder with sheet steel cylinder oscillating shells Bunker feeding system Control mounted on a work table very good condition
used
Bolt feeder TUCKER / EMHART ETF53D 10.00/SWB11 T044 322/500 500 V New ! Dimensions: 450 x 500 x 490 mm
used
Power cable with media feedthrough HELUKABEL 200² x 400 Number of wires: 1 Cross-section: 200 mm² Length between connecting screws: 400 mm bore for connecting screw: Ø 13 mm material thickness pole piece: 15 mm outer diameter: 35 mm outer sheath: rubber for liquid or gaseous media media connection: 1/4 ( inch ) New ! Dimensions: 430 x 35 x 35 mm
used
Power cable with media feedthrough HELUKABEL 200² x 600 Core count: 1 cross-section: 200 mm² Length between connecting screws: 600 mm bore for connecting screw: Ø 13 mm material thickness pole piece: 15 mm Outer diameter: 35 mm outer sheath: rubber for liquid or gaseous media media connection: 1/4 ( inch ) New ! Dimensions: 630 x 35 x 35 mm
used
27 own barfeeds in stock or on arrival (Iemca-Lns-Top Automazioni) visit our website and ask for more details
used
Vibratory feeder, sorting vibrator, with foot SORTIMAT SM 3 ( SM3 ) diameter: 200 mm gutter width in boiler: 3 mm Height base: 120 - 160 mm (adjustable) Diameter Base: Ø 91 mm Voltage: 220 V Frequency: 50 Hz used, checked ! Dimensions: 300 x 230 x 430
used
Vibratory feeder, sorting vibrator, MEHAG 2,5L Diameter: 220 mm gutter width: 20 mm Power: 50 VA voltage: 220 V Frequency: 50 Hz used, tested ! Dimensions: 270 x 250 x 180 mm
used
Vibrating feeder, sorting vibrator MEHAG 1 R Diameter: Ø 150 mm gutter width: 12 mm 220 V 40 VA approx. 0.4 m Connection cable used, tested ! Dimensions: 200 x 180 x 200 mm
used
Vibration feeder, sorting vibrator, without boiler SORTIMAT SM 3 ( SM3 ) diameter: 200 mm voltage: 220 V frequency: 50 Hz approx. 0.3 m connection cable used, tested ! without boiler ! Dimensions: 220 x 220 x 150 mm
used
Vibration feeder, sorting vibrator, REINHOLD JAHN APPARATEBAU SAZ 280 / 350GU ( SAZ280/350GU ) Diameter: 345 mm gutter width in boiler: 25 mm Current consumption: 1.82 A Voltage: 220V Frequency: 50 Hz used, tested ! Dimensions: 530 x 390 x 335
used
Vibration feeder, sorting vibrator, with foot SORTIMAT SM 3 ( SM3 ) diameter: 200 mm gutter width in boiler: 12 mm Height foot: 120 mm voltage: 220 V Frequency: 50 Hz used, tested ! Dimensions: 260 x 210 x 370
used
Inv. Num. : 6976 Type: BOSS 545/E type 32L Producer: IEMCA Created: 2005 Parameters: Maximum rod length: 3200 mm Rod diameter: 5-45 mm Weight: 850 kg
used
Manufacturer: Holzher Vorschub 3 Rollen, Type: ET 117, Feeding by rollers: 3 Rollen, Technical data:: 0,75 , Speeds: 4, Deflection of the pendulum axes mm: ca.25 mm,
used
Manufacturer: Comatic, Bauyeshr : ca.1995, Feeding by belt: yes, Main engine kW: 1,5, Speeds: 4-8-12-24, Stand: yes, Year :ca.1995
used
Wire feeder unit, motor for wire feeder O.S.L.V. ITALIA type 12810 motor: 42 V DC transport wheels: Ø 40 mm used, tested ! Dimensions: 320 x 220 x 250 mm
used
bar material dia.: 8 - 52 mm bar length: 3200 mm number of bars: 6 / ø 52 mm oil volume: 150 l weight: 700 kg total power requirement: 0,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 4723 Type: VL 5S Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Maximum turning diameter: 260 mm Tool holder: 12 pieces Lathe length: 3800 mm Lathe width: 2100 mm Lathe height: 2400 mm Lathe weight: 7000 kg
used
bar material dia.: 8 - 52 mm bar length: 3200 mm number of bars: 6 / ø 52 mm oil volume: 150 l weight: 700 kg total power requirement: 0,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 5794 Type: VSC 250 DS Producer: Emag Created: 2007 Parameters: Control system: Siemens Maximum turning diameter: 250 mm Maximum turning length: 100 mm Axis X: 680 mm Z axis: 200 mm Nominal current: 35 kW Weight: 7500 kg
used
Dedicated feeder for any tablets or capsules on blistering machines f.e. Uhlmann UPS 1070 • intermittent motion • for diverse product shapes • 60 strokes/min • format area max. 295 x 285 mm • own control unit, therefore universally applicable on different machines • suitable for Uhlmann rail system, easy mounting • incl. transport rack, mobile
used
Key data: 4200 mm, 25 mm, 25 mm
Bar feeder for multi-spindle lathe 8 spindles last attached to Gildemeister AS 16 / AS 20 Ø pitch circle 180 mm Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm
used
DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consists of: Multigraph PFA 52 Bow feeder - Format: max. 520x750mm; min. 120x120mm - Paper types: 60 g/m² to 500 g/m² – depending on substrate - Paper stack height: 600mm - Current: 100 - 240 VAC, 50-60 HZ On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote
FMB SL 80 S - 1200 B Short Bar Loader, Built in 2010, Control panel Short bar feeders, max bar length 1200 mm, Replenishment rod 6.12 and 20 mm,
used
Weber spiral conveyors as feeding technology for Weber screwdriving systems, suitable for any application in the field of feeding fasteners, etc. Offer refers to a spiral conveyor. Other spiral conveyors of the same design are available.
used
Bolt feeder TUCKER / EMHART ETF50D 10.70/5.7-32 T044 020/500 500 V New ! Dimensions: 510 x 500 x 500 mm
used
Pamasol 5934 Pneumatic Feeder With 1-lane output to the conveyor belt Accumulation conveyors ensure an even supply of product to a processing machine. - Hinge chain 150 mm wide - 5-lane, with 1-lane output - Drive with infinitely variable geared motor - Suitable for continuous operation in hazardous areas - Electric drive unit Electrical connection: 3 x 400 V + N + PE, 50 Hz Dimensions: H x W x L 88 x 80 x 210 cm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
used
Pamasol 33200 Pneumatic Feeder With 1-lane output to the conveyor belt Accumulation conveyors ensure an even supply of product to a processing machine. - Hinge chain 150 mm wide - 8-lane, with 1-lane output - Drive with infinitely variable geared motor - Without central belt drive - Suitable for continuous operation in hazardous areas - Electric drive unit - Feeding table suitable for Centomat Specifications Capacity: Up to 3000 cans per day The output depends on the size of the can, the filling volume, the type of valve and the number of workers Cans: Ø 100-200 mm x H 50-200 mm, aluminium, tinplate and glass Electrical connection: 3 x 400 V + N + PE, 50 Hz Dimensions: H x W x L 88 x 140 x 290 cm Original price 57.000 ,-€ More items - new and used - can be found in our shop! International shipping costs on request!
used
• For feeding of brochures etc. • Speed of friction straps max. 240 m/min • Width of product max. 650 mm • Length of product min. 165 mm • Height of magazin appr. 700 mm • Speed adjustable • Quantity control • Frequency controler Danfoss • Servocontroler Elau PacDrive MC-4 • 230 VAC/50Hz/3A Friction Feeder without control (PLC), must be integrated into a machine control system (PLC), or must equipped with a separate control system. We can offer this work on request.
used
• For feeding of brochures etc. • Speed of friction straps max. 240 m/min • Width of product max. 650 mm • Length of product min. 165 mm • Height of magazin appr. 700 mm • Speed adjustable • Quantity control • Frequency controler Danfoss • Servocontroler Elau PacDrive MC-4 • 230 VAC/50Hz/3A Friction Feeder without control (PLC), must be integrated into a machine control system (PLC), or must equipped with a separate control system. We can offer this work on request.
used
Friction feeder: • For inserting brochures/booklets etc. • Speed max. 240 m/min • Product width max. 90 mm • Speed infinitely variable • Code reading Laetus with camera wt880 and bad ejection • HMI touch screen Turret magazine: • 16 stacking slots for product W x L 53 x 100 mm, stacking height 440 mm • Output range stacking height up to 2m/min, single up to max. 200 products/min • Product quality min. 80 g/m² (paper) • Positioning accuracy +/- 1 mm • HMI touch screen • Drive 230V/50Hz
used
• For brochures, leaflets • Horizontal extension arm type 150, length 245 mm • Leaflet size: length max. 55 mm, width 50-105 mm • Speed max. 115/min, max. 20,000 leaflets/h • Adjustable amount of leaflets to be dispensed • Control unit VS-2002 right • Barcode reading leaflet • Ejection of bad leaflet with ejection counter-check • Double-sheet detector • Fill level control magazine • Control via 18-pole plug-in coupling • Electr. connection 90-240V/50-60Hz
used
• For brochures, leaflets • Horizontal extension arm type 150, length 245 mm • Leaflet size: length max. 55 mm, width 50-105 mm • Speed max. 115/min, max. 20,000 leaflets/h • Adjustable amount of leaflets to be dispensed • Control unit VS-2002 right • Double-sheet detector • Fill level control magazine • Control via 18-pole plug-in coupling • Electr. connection 90-240V/50-60Hz
used
Rotary feedthrough, rotary outlet, rotary distributor -for hydraulics -Number: 2x large passage -Number: 8x control line, smaller passage -Dimensions: 350 x 400 mm -Weight: 45 kg
used
Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Throughout: Ø 105 mm -Pole circle: Ø 235 mm / M20 -Take: short taper 11 -Weight: 56 kg
used
Combination conveyor, fan with connection to the hopper, fan conveyor, combination conveyor, AirMove - components, injector conveyor, injection conveyor -Injector conveyor: injection conveyor with distributor, without fan -Inlet funnel: 175 x 180 mm -Distribution radius: 200 mm -Discharge pipe: Ø 60 m -Drive motor: Euronorm 0.09 kW -Number: 3x conveyors available -Price per piece -Dimensions total: 1630/500 / H1230 mm -Weight: 57 kg