We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,993 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Egarpack Filler And Feeder Filler For Bottle 1 L Model: LLR 20 Production: 5,000 b / hour Number of nozzles: 20
used
Gildemeister Sprint 32 Linear CNC lathe with Boss 21 bar feeder Machines are in good condition
used
Schutte SD50 multi spindle lathe loader. Machine purchased used by bankruptcy and never used by us. Perfect because he worked only a few years. Purchase in the state in which it is located as we know nothing for any problems never having it turned on. Visibly it is perfect and almost new.
used
Description: max bar length 3000 mm, fi 42 Approx. Onsite Dimension. (l x w x h): 5,200 x 1,000 x 1,400 mm, weight approx.: 2,000 kg
used
Key data: 1250 mm, 65 mm
LNS Ecoload Bar feeder (short) Rod diameter 6 - 65 mm Bar length 300 - 1250 mm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.
used
incl. tripod ---------- Technical data ---------- wheels: 4 pieces, Number of speeds: 4 Sold as is, without technical inspection
used
Feeding chute Svedala Brand: Svedala Length 2200 mm - Width 1200 mm with two vibration motors of 1.3 kW each
used
Description: serial number: 11363/13 max. strip width: 250 mm sheet thickness: 2 mm standard speed: 5 - 30 m/min. infeed height: 1250 mm number of rollers: 11 total power requirement: 4 kW plate width: 250 mm, plate thickness: 2 mm, number of rolls: 11, straightening speed: 5 - 30 m/min, total power requirement: 4 kW, weight approx.: 650 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,100 x 1,400 mm
used
Description: includes table and cables Approx. Onsite Dimension. (l x w x h): 900 x 500 x 1,500 mm, weight approx.: 100 kg
used
The Alpha SL65 S bar feeder is a simple alternative to bar feeding according to spindle length. It is designed for simple applications, especially for standard production parts, and for medium and large production runs. Rod length: 300 - 1500 (limited by spindle length). Diameter Ø 6 - 65mm. Tank capacity: 600mm. The feeder is still attached and can be seen running.
used
Description: Incl. a tripod from the manufacturer MAHR Approx. Onsite Dimension. (l x w x h): 500 x 400 x 400 mm, weight approx.: 20 kg
used
curved conveyor belt bend 90? width carpet 500 mm total width 700 mm min/max height 890/990 mm length inner size 2800 mm engine 0.55 kW
used
Description: Length of the infeed conveyor estimated at approx. 120 m, reel diameter approx. 1000 mm Approx. Onsite Dimension. (l x w x h): 400 x 1,400 x 1,400 mm, weight approx.: 60 kg
used
Description: COUTH H-80 Screwdriver with Feeder no. 233 Approx. Onsite Dimension. (l x w x h): 400 x 600 x 1,800 mm, weight approx.: 50 kg
used
Description: TECHNICAL FEATURES: Useful working dimensions X: , ,min 250 – max 3,000 mm Useful working dimensions Y: min 100 – max 920 mm Piece passage: min 12 – max 60 mm COMPOSED BY: 6 top vertical drilling units with numerical control positioning, each complete with 2 chucks with 26 independent vertical spindles 6 lower vertical drilling units with numerical control positioning, each complete with 2 chucks with 26 independent vertical spindles 2 numerically controlled horizontal drilling units each complete with 2 chucks with 21 independent spindles 6 electronically positioned pressure units Fixed side panels and photocell barriers serial number: ALL/076/03, Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 20,000 kg
used
Approx. Onsite Dimension. (l x w x h): 2,450 x 2,500 x 930 mm, weight approx.: 650 kg
used
Description: Machine equipped with N°8 independent automatic spindles. , Ideal for automatic drilling and tapping. , Approx. Onsite Dimension. (l x w x h): 980 x 1,550 x 1,100 mm, weight approx.: 1,100 kg
used
Description: The machine is equipped with No. 29 spindles. Threaded connections. Approx. Onsite Dimension. (l x w x h): 1,400 x 1,500 x 1,300 mm, weight approx.: 500 kg
used
Description: working hours: approx. 45822 hrs. automatic tray maximum diameter: 26 ,mm maximum processing length: 220 ,mm Steuerung: PNC-DECO number of tools: 20 spindle speed: 8000 rpm spindle motor power: 5.5 kW  , bar feeder: capacity: ,2 - 26 mm bar warehouse: ,300 mm (15 pcs, fi20 mm bars) max. bar length: ,3000 - 3200 mm or 4000 -4200 mm min. bar length: ,1000 mm loading times: ,30 sec. for long bar 3000 mm forward speed: ,20 m/min reverse speed: ,40 m/min  , single dimensions: lathe: 2300 x ,1600 x 1850 mm feeder: 4300 x 800 x 1300 mm  , please also have a look at the PDF document of this machine turning diameter: 26 mm, Drehlänge: 220 mm, Accessories included: Yes, control: PNC-DECO, toolchanger positions: 20, turning speed range: 8,000 rpm, total power requirement: 5.5 kW, weight approx.: 3,000 kg, ...
used
Description: serial number: 161 control: FANUC Series 18i-TB  , main spindle: bar passage diameter: 13 mm (16 mm) spindle bore: 17 mm motor power: 3.7 / 5.5 kW max. speed: 12000 rpm  , headstock: headstock stroke: 130 mm  , pick-up spindle: bar passage diameter: 13 mm (16 mm) spindle bore: 17 mm motor power: 2.2 / 3.7 kW max. speed: 12000 rpm max. clamping depth: 95 mm max. part length with workpiece pick-up: 130 mm  , tool carrier internal machining: number of slides: 1 travels: X-axis: 2 x 30 mm Y-axis: 135 mm number of tool positions: 2 x 4 cross-section of turning tools: 12 x 12 mm  , driven tools: number of tool positions: 3 tool holder: ER11 max. speed: 8000 rpm  , FMB minimag 18 bar feeder  , single ,dimensions: machine: 1600 x 1200 x 1900 mm bar feeder: 4900 x 600 x 1300 mm  , please als ...
used
Description: ATTENTION: Location , 64-308 Jabłonna k. Rakoniewice, Poland Very well maintained WEEKE Optimat BHX 560 CNC throughfeed drilling machine with machining supports top / bottom and slip and take-off table. Technical data: Workpiece dimensions - length 200 - 3.000 mm - width 70 - 1.000 mm - thickness 8 - 80 mm - Workpiece width of all aggregates max. 1000 mm - Workpiece width with machining restrictions max. 1300 mm - Workpiece stacking max. 2 pieces Drilling supports top / bottom each V38, H8X/2Y, N X-Y 90, F-ETP-6 KW - Vertical drilling unit with each 38 drilling spindles - Horizontal drilling unit with each 8 X-direction and 2 Y-direction spindles - Grooving saw X-Y-direction 90 - Milling spindle ETP with motor 6 KW Machining unit with drilling and milling Insertion table with automatic workpiece feeding and positioning The Weeke was in southern Germany at a reno ...
used
Description: With 4 rollers Power 0.75 kW 2 speeds Approx. Onsite Dimension. (l x w x h): 1,100 x 600 x 700 mm, weight approx.: 50 kg
used
Description: Max. sheet size: 3048 x 1524 mm Number of cassettes: 2 Sheet material thickness: 0.8 - 25 mm Max. sheet weight: 890 kg Max. height of plate stack (incl. pallet) 300 mm Max. weight of plate stack: 3200 kg weight approx.: 3,200 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,000 x 2,500 mm
used
Description: Table size 1100 x 900 mm Right, left rotation Milling arbor cone MK 5 Milling arbor 40 mm , Largest tool 340 mm , Height adjustment fixed spindle 160 mm, height adjustment interchangeable spindles 135 mm , Speeds 2900, 4500, 6500, 10,000 , Feeder, manufacturer Holz Her, type FD 14, 550/750 W, 1450-2850 rpm Included: Aigner table extension 2 pieces Aigner vario stop 2 pieces watch the video and the PDF of the machine main motor: 7.5 kW, table depth: 860 mm, table length: 1,100 mm, spindle diameter: 40 mm, spindle speed: 10.000, Approx. Onsite Dimension. (l x w x h): 1,100 x 900 x 860 mm, weight approx.: 800 kg
used
Description: Complete REM OVER RS 20.13 CNC machining center for drilling, milling and grooving. Incl. MAHROS Runner 12-32/D loading and unloading bridge and OMAL INSERT LINEA 2000 CNC machining center for drilling and dowel insertion station. The pictures are from 2011 after commissioning. Original pictures of the current dismantled state (warehouse service provider) will be submitted later. Pos. 1 MAHROS Runner 12-32/D loading and unloading bridge in portal design - Suction frame with automatic suction cups - Motorized roller conveyor - Dimensions approx. 1000 x 3500 mm - Load capacity approx. 1000 kg/m - Unloading conveyor LS-90° (LxW approx. 3200 x 1600 mm) - Unloading conveyor LS (LxW approx. 5120 x 1600 mm) - Plate dimensions  ,  ,- Length approx. 230 - 3200 mm  ,  ,- Width of the single plate approx. 220 - 1220 mm  ,  ,- Width of the plates in double ...
used
Description: Top-maintained and very good technical condition HÜTTENHÖLSCHER 2-sided through-hole drilling machine for drawer fronts, stove top panels and sink panels. The system is professionally dismantled and loaded by the companies HÜTTENHÖLSCHER and BECKHOFF. The left-hand continuous drill was built in 2006 and the right-hand continuous drill was built in 2009. The system is sold without a BECKHOFF control. We would be happy to request an offer for you from BECKHOFF. Technical data Output approx. 6 parts/min. per station Drawer fronts - Width approx. 294 to 894 mm (retrofitted to 1200 mm) - Height approx. 126 to 573 mm (retrofitted 106 to 789 mm) Manual loading - Timing belt transport 1200 mm wide and 2000 mm long for buffering - Timing belt transport 1200 mm wide and 800 mm long for scanning the fronts in transit - Conveyor belt with angle transfer to the left or right pr ...
new
Basket size LxWxH:800 x 500 x 400 mm Max. basket weight:250 kg No. of washing chambers:1 No. Of tanks for washing:1 Electrical heating power:7,5 kW Rated power supply:8 kVA Machine size LxWxH:1,5 x 1,15 x 0,9 m Ultrasonic cleaning machine with 28 or 40 khz generator
new
Basket size LxWxH: 900 x 500 x 450 mm Max. basket weight:300 kg No. of washing chambers:2 No. Of tanks for washing:2 Electrical heating power:24 kW Rated power supply:30 KW tank capacity:250 / 180 l Capacity:140/120 L Machine size LxWxH:1,9 x 1,5 x 2,7 m Cleaning device with 3 steps and basket dia. of 900 mm PLC control, tank exhauster pump
used
Max. basket weight:200 kg No. of washing chambers:1 No. Of tanks for washing:1 Small parts - cleaning system BOUS "CeBeCo" SECURUS "D" size 2 "S" from workshop, hardly any operating hours, 1A-TOP-CONDITION Usable dimensions: approx. 800 mm diameter Useful height: approx. 450 mm Operating weight: max. 200 kg with evenly distributed load Nozzles: flat jet Pump: approx. 3 kW 2x heating: approx. 2x 6 kW Thermostat: digital Insulation: Terodem heat insulation Detergent filling capacity: approx. 200 l Power requirement for fan: approx. 0.25 kW Power requirement for drive: approx. 0.12 kW Power requirement for emptying pump: approx. 0.6 kW Voltage: 230/400 V, 50 Hz PE/N Control voltage: 24 V Loading height: approx. 900 mm Labelling: German 1. VAPOUR EXTRACTION The unit is equipped with a vapour extractor, consisting of an electric low-pressure fan with intake connection. The scope of delivery ...
used
General SKU391T1168 LocationBarneveld MakeJöst TypeRUF No.0871679 Year of construction2008 Main Features MaterialStainless steel Length1320 mm Width250 mm Specified Features - Vibro feeder MaterialStainless steel 1.4305 (303) Vibro feedercheck Feeder diameter250 mm Feeder length1320 mm Closedcheck With hoppercheck InletDia. 265 mm OutletDia. 190 mm With vibro motorcheck With motor 0,40 kW, 400 volt, (2x) Without controlscheck Information Mounted on framecheck Total height1,4 m Weight230 kg Floorspace1,40x1,05 m ATEX compatiblecheckMinerals & inorganicOther feedAnimal feedSugarVibro feedersPowdered foodsFeed additivesJöstIndustries > Chemical > Minerals & inorganicIndustries > Food & Feed > Other feedIndustries > Food & Feed > Animal feedIndustries > Food & Feed > SugarConveying systems > Vibro feedersIndustries > Food & Feed > Powdered foodsIndustries > Foo ...
used
Four-sided planer Weinig Hydromat H25N with feeder 100 m/min - German production - hydraulic feed up to 100 m / min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 bottom spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 bottom spindle 7.5 kW 8 x universal spindle 1800 7.5 kW infinitely adjustable feed rate up to 100 m/min feed pump motor power 22 kW nine rollers in the pulling countertop, three of which in front of the first head seven steel pulling upper rollers four upper rubber pulling rollers pneumatic clamping 1-6-7 spindle joint automatic countertop lubrication feeding table 3000 mm Speed adjustable smoothly up to 100 m/min two upper pneumatic rollers six bo ...
used
Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm Min. material length 800 mm .max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg
Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP
Colmec Italy 150mm dia coldfeed extruder, roller feed - 200mm wide, Screw length 2000mm, L/D ratio 13:1, with simple Spaghetti die/cutter assembly, jacketed barrel and cored screw for temperature regulation (no TCU's included). with 100HP, 1750rpm, 575V, 3ph, 60Hz AC motor (ex Canada) and controls. Fabricated bedplate. Screw height: 620mm. In very good condition.
used
new fatosa 160 self feed mincer 3 plates 2 knife unger system Up to 5,000 Kg per hour, hopper capacity 100 Kgs all stainless steel
new
- Feed Driven Roller Top Assy - HP Part Number CA245-08802 - for HP Indigo Series 2 Machines
used
Specification IMPERIA F + feeder + Special batch Delivery · Nr. 1 (one) S/H IMPERIA F 120x165cm with electronic feeder and special batch delivery system, delivered, controlled and checked with 6 months warranty · Year of manufacture 2000 · with electronic feeder (no high pile) · Speed Approx. 1350 strokes per hour · min board thickness 400gr/m² · Corrugated board thickness max 7mm · pneumatic clutch- variable speed, · Equipped according to CE regulations · special suction cups with 50mm telescopic – pneumatically adjustable arms · SPS System · PICARD die cutting plate · micrometric adjustment of the pressure in addition to the standard one · special universal chase-mobile delivery table for conveying blanks, pneumatically controlled with automatic lowering device allowing to the opera ...
used
NNP Hopper and screw feed Stainless, 1000Kg hopper, discharge screw, screw diameter 200mm, screw length 2800mm
used
DMG Feed Drives 1x Form 80x30x3+3, S-No.: 916412, Art. SKU: 2654426 1x Form/ X-A, S-No.: 1638737 1x Form 63x30x3+3, S-No.: 1630671 1x Form 63x30x3+3, S-No.: 1616895
used
6 feeders
used
delivery belt, compressor, 340 x 392 mm
used
used
new
SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle
new
SK40 DIN 69871 Oil Feeder Weldon 32mm
used
Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Feeding length automatic feeder: 0 mm Sawing speed 11 – 14 – 18 – 20 – 22 – 36 M/Min Length:2.200 mm Width:900 mm Height:1.400 mm Weight:1.200 kg
new
- Feeder motherboard - HP Part Number 5188-6595 - for HP Indigo Series 2 Machines
new
- SP Feeder Air Release Servo Motor - HP Part Number CA397-01120 - for HP Indigo Series 2 Machines
new
- SP Feeder Bridge Registration Motor - HP Part Number CA397-01980 - for HP Indigo Series 2 Machines
new
- SP Feeder Pressure Valve with Servo - HP Part Number CA397-01600 - for HP Indigo Series 2 Machines