feed mill used for sale

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange for: three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 250 mm -Cone diameter: 106 mm -Bolt circle: Ø 4 x 160 mm -Weight: 8 kg

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 195 mm -Passage: Ø 62 mm -Weight: 9 kg

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 160 mm -1 set: outside jaws -Passage: Ø 42 mm -Weight: 11.2 kg

Bearing number: 3685 LOADER Manufacturer: Top Automazioni , Type: 337SX Machine NO.: BRS13122782 RE-S, Year of construction: 2013 Specifications: Stang dia. 6-37 mm rod length 3200 mm Length: 4500 mm, Høhe: , Width: , Weight: 1300 kg

VSA 38 TB Feeder 3 feed rollers Roll diameter 120mm Roll width 60mm 8 speeds (2/4/5.5/6.7/11/12/15/30 m/min) Motor 750W 400V 50Hz projection 1050mm Suspension travel of the castors 25mm 2-stage gearbox Weight 65kg G&STÜ-5114501

Feed length - 0.1 - 6500 mm Width 20 - 300 mm Belt thickness 1.0 - 3.0 mm Material Quärschnitt 500 mm2 motor - 2,2 kW Complete documents more info on request

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 190 mm -Passage: Ø 57 mm -Weight: 10 kg

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 153 mm -Passage: Ø 40 mm -Weight: 7 kg

Feed screw stainless steel used Manufacturer: KOMEN & KUIN D.V. Diameter approx. 500 mm, Conveying length approx. Mm Stainless steel Drive 3 kW 380 / 420 V Total dimensions approx. 4 x 1.6 x 1.6 m. The screw was mounted on this screw blancher Changes and errors in the technical data and information excepted.

Hacker feed roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Feed roller: serrated -Roll diameter: 270 mm -Transport roller width: 626 mm -Total length: 626 mm -Shaft mount: 80 mm -Quantity: 1x piece available -Weight: 137 kg

Micro feeders in good condition, Agitator, gear motor, 0.12kw - 10rpm, Thread ø 60, slope 45, core ø 17 Painted steel, buffer tank with full detector Dosing capacity at 50 Hz approx. 70 l/h

Specifications Roller conveyor 4000 mm Roll width 300 mm Rolls Ø 30 mm Number of rolls 16 Support feet 2 elements à 2m

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...

Deir piece 3 cheek chuck Brand Forkardt 2x 315 mm diameter and 97 mm high 1x 200 mm diameter and 75 mm high with various attachment jaws The retail price is net.

Demag feed station (EURO pallet dimensions) for placing pallets on the conveyor track ANR 725535 ASN 022 very good condition, year of construction 2000 Price per piece

Chuck flange, flange mount, lathe chuck flange, drive flange -Feed flange for: drive heart, three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 185 mm -Short cones: 6 -Quantity: 1x disc available -Weight: 4 kg

Manufacturer: Schütte Type: ADH 160 Machine No.: 225 Year of construction: 1981 Weight: 11t General / technical data: turning length: 125mm workpiece diameter: 168mm max drilling depth: 125mm Adjustable quantity: from 3.4 to 450 sec. Operating hours: 8.200h Working spindle speed: from 90 – 1120 rpm Installation area (l x w x h): approx. 4730 x 1700 x 2120mm Power Supply: 380V / 50Hz Accessories: 7 cross slides 8 longitudinal slides Tapping device 4x 2-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of lining: Röhm 0W-406 682 Clamping force 1200 da N 4x 3-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of feed: Röhm 1W-406 681 Clamping force 1800 da N Insert arm over lining 100mm. The workpiece is fed to the insert arm by a swivel arm and rotary gripper. Rem ...

Roto Feed Head, MCT 16265 R, Filton, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Connection thread R 3/8" Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Chuck flange, flange mount, lathe chuck flange, drive flange -Feed flange: for drive heart, three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 218 mm -Short cones: 6 -Bolt circle: Ø 155 mm -Bolt spacing: 110 mm -Quantity: 1x disc available -Weight: 9.2 kg

Feed motor for inert gas welding device, inert gas device, gear motor, electric motor, direct current motor -Manufacturer: Migatronic -Type: 402535 24 volts -Number: 1x motors available -Price: per piece -Dimensions: 250/130/H160 mm -Weight: 3.4 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Throughout: Ø 105 mm -Pole circle: Ø 235 mm / M20 -Take: short taper 11 -Weight: 56 kg

Stock number: 3765 BAR FEEDER - LOADING MAGAZINE Manufacturer: IEMCA, Type: VIP 80 II - 16 Machine NO.: 0207370a01, Year of construction: 2007 Specifications: Max. Stang dia. 80 mm Min. Stang dia. 5 mm Stang length 1400 mm Length: 1900 mm, Height: 1500 mm, Width: 1000 mm, Weight: 520 kg

Allweiler feed pump type SNF 280 ER46U4-W33 in new condition for sale. Technical data can be found in the attached data sheet.

Feed reel Manafacture: FAGOR Type: 100G

Standard

Electronically controlled, programmable roller feed for advancing and precise positioning of strip material SIEMENS® PLC – Control Largest sheet strip width 200 mm (optionally up to 800 mm) Sheet thickness range 0.8 to 3 mm Steel sheet 400 N/mm² - (optional thicker sheets on request) Rollers Ø 95 mm Maximum practical feed rate in operation with eccentric presses: 120 strokes per minute with a maximum feed length of 80 mm per stroke

Power supply rails, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, potential feed terminal -Type: KL9100 -Number: 4 pieces available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

Pesa Feed Belt 1.2 m Belt Conveyor 60 cm Pesa Length: 1195 mm Belt width: 600 mm Ingress protection: IP54 3x400 VAC 0.37 kW 0.6 m/s Year: 2008 More items - new and used - can be found in our shop! International shipping costs on request!

- Output: up to max. 30to/h - Motor: 400V, 50Hz - Without electrical equipment Mass: - Length: approx. 2000mm + discharge screw - Width: approx. 1700mm - Height: approx. 1700mm

Outer Ø: 310 mm Bore: 115 mm Chuck height with flange: 115 mm Height with clamping jaws 165 mm Clamping bolt spacing 120 mm Bolt D 27 mm- M16 new square safety spanner

Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S -Stroke: mm -Dimensions: see photos -Transport dimensions: 900/640/H620 mm -Weight: 200 kg

Enveloping feeder Schneider SF 80; shed feeder; good condition; cleaned and tested; Format max.360x360mm, min.100x100mm; .max. Speed. 15000/hr; height adjustable; with delivery conveyor A20. Envelope feeder Schneider SF 80; good condition; cleaned and checked; size max. 360x360mm, min.100x100mm; max.speed 15000/h; adjustable hight; with delivery belt A20.

27 own barfeeds in stock or on arrival (Iemca-Lns-Top Automazioni) visit our website and ask for more details

Set of 5 feed rollers for gathering machine c.p. bourg AE 10/15/30/46 (black) Manufacturer number 9260011, 9260148 Art.: PS5062

Einzugsrollen / Feed roller Bourg BT12 / BT15 Angezeichnete Preis für 1 Stück / Marked price for 1 piece Art.: PS2502 Ersatzteil Nr. / parts No. 700604600

Lippert inclined diverter Inclined inlet saw feed 45° RA1821 Year of manufacture: 2012 Feed angle: 45° (gusset) Nominal/outer width (NB): 570 mm Usable width (NUB): 500 mm Conveyor speed: adjustable Roller diameter: 50 mm Interroll, hexagon incl. compression spring Drive: 1x Drivecontrol 20 with 24V Material: galvanised steel Centre distance: 75 mm Overall height: 130 mm Transport dimensions: L x W x H = 705 x 570 x 130 mm Features: condition: good (used) Construction year: 2012 angle: 45° nominal voltage: 24V Conveying length in mm: 705 Nominal / outside width in mm: 570 Roll width in mm: 50 Roll division in mm: 75 Driven: YES Engine type: Trommelmotor KW: - Ampere: - Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you ...

Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case -Manufacturer: Dinse gas-cooled wire feeder case -Type: DIX -Quantity: 7x wire feeder cases available -Price: per piece -Dimensions: 700/250/H390 mm -Weight: 27 kg/pc.

conveyor belt, belt conveyor, transport belt, belt conveyor -Conveyor system: with sheet metal support -Speed: 2 m/min -Drive: VEM 0.18 kW -Dimensions: see photos -Dimensions: 2540/780/H870 mm -Weight: 168 kg

Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: Oerlikon wire feeder, gas-cooled -Type: unfortunately without type designation -Dimensions: 640/280/H400 mm -Total weight: 19.6 kg

bar material dia.: 8 - 52 mm bar length: 3200 mm number of bars: 6 / ø 52 mm oil volume: 150 l weight: 700 kg total power requirement: 0,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material dia.: 8 - 52 mm bar length: 3200 mm number of bars: 6 / ø 52 mm oil volume: 150 l weight: 700 kg total power requirement: 0,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4200 mm, 25 mm, 25 mm

Bar feeder for multi-spindle lathe 8 spindles last attached to Gildemeister AS 16 / AS 20 Ø pitch circle 180 mm Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm

Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: CLOOS wire feeder, water-cooled -Type: lCK98A -Dimensions: 660/390/H350 mm -Weight: 23 kg

Dedicated feeder for any tablets or capsules on blistering machines f.e. Uhlmann UPS 1070 • intermittent motion • for diverse product shapes • 60 strokes/min • format area max. 295 x 285 mm • own control unit, therefore universally applicable on different machines • suitable for Uhlmann rail system, easy mounting • incl. transport rack, mobile

Pamasol 33200 Pneumatic Feeder With 1-lane output to the conveyor belt Accumulation conveyors ensure an even supply of product to a processing machine. - Hinge chain 150 mm wide - 8-lane, with 1-lane output - Drive with infinitely variable geared motor - Without central belt drive - Suitable for continuous operation in hazardous areas - Electric drive unit - Feeding table suitable for Centomat Specifications Capacity: Up to 3000 cans per day The output depends on the size of the can, the filling volume, the type of valve and the number of workers Cans: Ø 100-200 mm x H 50-200 mm, aluminium, tinplate and glass Electrical connection: 3 x 400 V + N + PE, 50 Hz Dimensions: H x W x L 88 x 140 x 290 cm Original price 57.000 ,-€ More items - new and used - can be found in our shop! International shipping costs on request!

Friction feeder: • For inserting brochures/booklets etc. • Speed max. 240 m/min • Product width max. 90 mm • Speed infinitely variable • Code reading Laetus with camera wt880 and bad ejection • HMI touch screen Turret magazine: • 16 stacking slots for product W x L 53 x 100 mm, stacking height 440 mm • Output range stacking height up to 2m/min, single up to max. 200 products/min • Product quality min. 80 g/m² (paper) • Positioning accuracy +/- 1 mm • HMI touch screen • Drive 230V/50Hz

• For brochures, leaflets • Horizontal extension arm type 150, length 245 mm • Leaflet size: length max. 55 mm, width 50-105 mm • Speed max. 115/min, max. 20,000 leaflets/h • Adjustable amount of leaflets to be dispensed • Control unit VS-2002 right • Double-sheet detector • Fill level control magazine • Control via 18-pole plug-in coupling • Electr. connection 90-240V/50-60Hz

for cap type PCO 28-1881 with Siemens S7 PLC Capacity: approx. 40,000 caps/h with sorting unit with cap control incl. approx. 18 m feeder with 2 blowing stations

Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 200 mm -Bolt circle: Ø134 mm -Socket: Short cone 6, cone Ø 101 - 106 mm -Overall dimensions: Ø 200 x 145 mm -Weight: 7.6 kg

Feeding control, controller, level controller, control -Manufacturer: H. Grote Stall- und Melktechnik, Futtersteuerung -Type: TF 38/50 -Dimensions: 220/120/H250 mm -Weight: 2.4 kg