fas used for sale

Working length:1040 mm Sheet thickness: 4 mm Cutting angle: 1.6° Backgauge: 10 - 750 mm Number of hold-downs: 1 (13000N) Side stop: 70 - 850 mm Travel speed: 90 mm/s Projection (WxH): 20 x 125 mm Weight, ca.:1600 kg Dimensions (WxDxH), approx.: 1850 x 1870 (3120) x 1550 mm Equipment: - Motorized backgauge - Foot control - Emergency stop impact button -Operating instructions - Table widening

large working width: 3240 mm for sheets up to: 4 mm Opening width upper wall: 350 mm Adjustability bending pliers: approx. 80 mm Bending angle adjustment: up to approx. 180° Top cheek drive: 4.8 kW Unterwangen drive: 7.5 kW electr. Connection: 400 V kW Weight: 6800 kg Space requirement: 4520 x 1400 x 2080 mm

sheet width: 4000 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 8,50 t dimensions of the machine ca.: m Controlled back gauge up to 1,000 mm Side stop and table extensions cutting length limitation cutting edge lighting Protective fence, rollable with safety switches The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending length: 1540 mm sheet thickness: 1.5 mm steel Roller diameter: 80 mm Motorized rear roller lining with automatic switch-off Clockwise and counterclockwise rotation via foot switch 3 roller drive Safety cable pull switch Conical rounding possible

Hot melt adhesive binder Fastbind Elite XT; good condition; cleaned and tested; Format A3+; hot melt; Binding length max.455mm; Binder thickness 140-320mm; Book thickness max.40mm; Tool for soft- and hardcover. Hot melt perfect binder Fastbind Elite XT; good condition; cleaned and checked; size A3+; hot glue; Max.Book Lenght 455mm; book lenght 140-320mm; Book Thikness Max.40mm; Tool for soft and hard cover.

1500 x 1.5 mm bending capacity (sheet iron 400 N/mm2) with new angle control ELGO (new in 2023) (without hindling)

Motorized three-roll bending machine Fasti 2040x2mm Roller diameter approx. 105mm sheet thickness over the entire length 2mm Foot switch GS identifier Hndxqcbkg Dimensions: LxWxH approx. 3x1x1.2 meters Weight approx. 1300Kg

sheet width: 3000 mm plate thickness: 10,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 10,00 t dimensions of the machine ca.: 3,60 x 2,50 x 2,05 m • Controlled back gauge 10 - 1000 mm • Angle stop 1600 mm • 3 additional support arms • Automatic cutting gap adjustment • Automatic cutting angle adjustment • Cutting edge lighting • Cutting length limit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting length: 3040 mm sheet thickness: 4 mm steel Motorized rear gauge with digital display up to 1000 mm Side stop and table lengths Cutting length limitation Cut edge illumination Weight approx. 4500 kg

Fasti 2040 x 3 mm Max worklength: 2040 mm Max tickness: 3 mm Distance between clampblock -- ram: 80 mm Eletric motor (power): 2,2 kW Weight: 2460 kg

Max. bending length: 3040 mm Max. sheet thickness: 4 mm steel Manual and automatic bending sequence possible Bending angle adjustable via potentiometer Lifting height of the upper beam variable Central lubrication Bending rail ground Operating instructions Other bending rails and backgauge on request Weight: approx. 6,000 kg

Max. cutting length: 1040 mm Max. sheet thickness: 2.5 mm steel Manual backgauge with hand crank up to 500 mm Side stop and table extensions

sheet width: 103 mm weight: 300 kg drive: ja : Gußhebel abgebrochen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending capacity at 45 kg/mm2: 2540 x 2 mm 6 angles pre-adjustable Automatic or manual operation Double foot switch 1 additional edge rail 1 additional bending rail wide

sheet width: 1270 mm plate thickness: 1,75 mm ST plate thickness: 2,00 mm ALU plate thickness: 2,50 mm KU thickness at Niro-steel: 0,80 mm distance between columns: 1300 mm daylight opening: OW ~ 380 mm work height max.: 900 mm adjustment: UW 60,0 mm bending angle max.: 180 ° weight: ca. 200 kg kg range L-W-H: 2000 x 520 x 1500 mm good condition () Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9355182 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 1255 mm plate thickness: 4,0 mm ST plate thickness: 2,0 mm VA plate thickness: 6,0 mm ALU number of strokes - loaded: ~ 66 Hübe/min. cutting angle: 1,5 ° total power requirement: 5,5 kW weight of the machine ca.: 2600 kg. range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition () Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325278 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rebate tensile spinning machine Manufacturer: FASTI Type: 605 Year of construction: 1989 Control: OMRON SYSMAC CPM1 Max. working width: 2040 x 1.25 Working diameter max.: 900 mm (1000 mm with egg-shaped pipe body) Projection: 300-400 mm Roll forming stations: Standard flat rollers Sheet thickness max.: 1.25 MM at 400 N/mm2 Engine kW: 2.25 kW Connection: 400 volts Dimensions LxWxH: 3300 x 700 x 2220 mm (= incl. attached control)

one pass rolling and curving machine dia of upper roll (steel): 100 mm dia of under roll (rubber): 270 mm

Equipment consists out of: 1 - Three decoilers 2 - Sheetholder with three levels 3 - Fasti straightening unit 4 - Fasti shear Transversal cut to length line / Querteilanlage / installation de coupe en longueur

Max. bending length 2540 mm Max. plate thickness 2,0 mm Equipped with: Motorized back gauge 2500 mm Segments Service tools etc.

Max. bending length: 2040 mm Max. sheet thickness: 1.25 mm steel Clockwise and counterclockwise rotation via foot switch 3-roller drive Safety pull switch Conical rounds possible

Working width: 2040mm, max. sheet thickness: 3mm.

Max. label dimensions: 2x5.5 inch, max. printing speed: 152/min, weight: 150kg, operational hours counter: 573h.

sheet width: 2040 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,80 t dimensions of the machine ca.: m Manual and automatic bending process possible Bending angle adjustable via potentiometer Stroke height of the upper beam and material thickness can be preselected via DIP switches Polished bending rail The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. bending length: 2040 mm Max. sheet thickness: 2 mm steel Manual and automatic bending sequence possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail ground Weight: approx. 1800 kg

Key data: 160 t, 3000 mm, 2550 mm

Max. bending length 3000 mm Max. pressure 160 Ton Distance between side frames 2550 mm Length of stroke 200 mm Control DELEM DA 24 e Equipped with: Motorized back gauge Upper dies Bottom dies Segments Foot contact 2-hand operated Service tools etc.

Universal flanging machine, Border FASTI type 81504 - UBPB 1,5 Masch. Nr. 908152 013 Year of construction 1990 Sheet thickness max. 1.5 mm Sheet thickness min. 0.5 mm Flange height max. 12 mm Flange height min. 4 mm Flow speed 4 / 8 m/min. Roll diameter 60 mm min. inner radius of curvature at 90 arc piece 100 mm drive power 1.1 / 1.4 kW Mains connection 400 volts, 50 Hz cam standing seam head for the production of locking grooves on the vertical rebate - Sheet metal guide - Operating instructions Space requirements L x W x H 700 x 610 x 1250 mm Weight 150 kg very good condition; used

Max. sheet thickness: 1.5 mm steel 2 motor speeds Additional head for the production of the cams on the cam standing seam

Hydraulic guillotine shears FASTI type 509 - TCHE 12/4 Masch. No. 4590 Year of construction 1986 Cutting length 1255 mm Cutting thickness at 400 N/mm² 4 mm Cutting thickness at 750 N/mm² 2.5 mm Back gauge 1000 mm controlled Shear angle 1.5 Hydraulic pressure max. 270 bar Motor power 7.5 kW Mains connection 400 volts, 50 Hz Back gauge with positioning control ELGO ELECTRIC Type 85 - manual cutting gap adjustment with dial gauge display on the right and left- infinitely variable cutting length adjustment - front angle stop left 1250 mm- 7 pieces hydraulic sheet metal hold-downs - electric foot switch - very solid and torsion-resistant welded construction - operating instructions with electrical plan, hydraulic plan space requirements L x W x H 1900 x 2200 x 1660 mm Weight 2600 kg good condition; used

Universal Folding Former, Folder FASTI Type 81501 Fabr. No. 928151 015 Year of construction 1992 Sheet thickness max. 1.5 mm Sheet thickness min. 0.5 mm Number of roller stadiums 7 pieces Profile height approx. 20 mm Centre distance of the rebate shafts 100 mm Working height 900 mm Working speed 7 and 14 m/min. Motor power 2.3 / 3 kW (pole switchable) Mains connection 400 volts, 50 Hz. - two speeds via pole-switchable drive motor - Standard roller set No. 5 for single and double standing seam- Roller set No. 11 for folding seam- Center rollers for S-fold - Pair of rollers for the production of locking cams in a standing seam - Instruction manual with electrical plan Space requirements L x W x H 1500 x 660 x 1100 mm Weight 450 kg very good condition; used

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: Fastbind Casematic H32 PRO Covermaker / Casemaker incl. accessories (laminator, block press) The FASTBIND Casmatic H32Pro is a professional covermaker / casemaker with folding unit for the on-demand production of individual book covers for hardcover bindings and photo books up to 330 x 330 mm. • For the production of custom printed hardcover book covers. • All you have to do is print the desired motif on self-adhesive material or self-adhesive material on the back. • Of course, all known book cover materials can also be used if they are self-adhesive or self-adhesive or glued • With the help of the Hardcover Maker, the grey boards are inserted and covered with a precise fit. • T ...

Offer 23336 Specifications: - Max. working width 2040 mm - max. material thickness at 40 kg / mm², strength 3 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Automatic sequential control for a complete workflow - Coding switch - Upper beam stroke up + down adjustment - Maximum opening width / stroke of the upper beam 350 mm - Height adjustability - the bending beam 80 mm - the lower beam 80 mm - Upper beam drive 400 V / 1.5 kW - Bending beam drive 400 V / 2.2 kW - with - E.- foot button - Flat rail + pointed rail - Space requirement approx. W 3200 x H 1600 x D 900 mm - Weight approx. 2800 kg

sheet width: 2040 mm plate thickness: 2,0 mm daylight opening: mm distance between columns: 2100 mm work height max.: mm : max. 135 Grad total power requirement: 1,5 kW weight of the machine ca.: 1,7 t range L-W-H: 2,9 x 1,0 x 1,7 m Furnishing: - Bending angle preselection - Segmented tool - additional bending set - manual backgauge - Dokumentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Magazine screwdrivers, drywall screwdrivers, automatic screwdrivers, automatic drill / drivers -Magine screwdriver -280 W 0-1100 rpm -with suitcase -Number: 4 x screwdrivers available -Price: per piece -Dimensions: 515/285/H75 mm -Total weight: 6 kg/piece

Electric clutch, electromagnetic clutch for guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, eccentric press -for: guillotine scissors crank guillotine scissors -Equipment: clutch, transformer, control -Manufacturer: LABOD electronic -Type: GN 6 DZ.4Q.80 -Total net weight: 160 kg

Punch, punching machine, punching device, hole punching machine, row punch, punching unit, Mehrkopfpstanze, punching system, -Distribution: 8 x punching pairs with a distance of 60 mm (O 4 mm) -Distance between the two outer punch pairs: 975 mm - Distribution: distance 75 - 165 - 165 - 165 - 165 - 165 - 165 - 75 mm -Max. Passage width: 1000 mm -Drive: electric -Weight: 260 kg

Punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system, -Number: 5x punching -Max. Width: 1000 mm -Tool built-in: 8x45 mm -Distance punch: 187 mm -driven: electric -Weight: 280 kg

Plate shears, sheet metal shears, sheet metal shears, crank plate shears, guillotine shears -Manufacturer: Fasti, mechanical guillotine shears type 506/20/2 -Cutting width: 2030 mm -Max. Cutting thickness: 2.0 mm -Back gauge: adjustable by hand -Throat: 545 mm -Stroke: continuous stroke / single stroke / tapping -Setup dimensions: 2505/1650/H1150 mm -Transport dimensions: 2505/1100/H1150 mm -Weight: 1200 kg

Press brake, bending bench, bending machine, folding machine, die bending machine -Handover: in current condition as seen -Note: the right side of the upper beam was repaired (welded) -Condition: fully functional -Manufacturer: Fasti, folding machine type 2095-25-2 -Max. Working width: 2540 mm -Max. Sheet thickness: 2 mm -Opening width: 290 mm -Connected load: 3.7 kW -Clamping: via threaded spindle -Bending angle: adjustable via potentiometer -Dimensions: 3615/1790/H1780 mm -Total weight: 2760 kg -Handover in current condition as seen

Fold former, folding machine, form folding machine, profiling machine, profiling system -Transfer: in the current condition as seen -Machine: has no motor and is therefore sold as a spare parts carrier -Profiling stations: 7 pieces -Sheet thickness max: 1.5 mm -max web height: 20 mm -1x set of rollers: -Work shaft diameter: Ø 28 mm -Center distance of the working shafts: -vertical: mm -horizontal: mm -Dimensions: 1460/740/H1050 mm -Weight: 352 kg

Bending tool, die, upper knife, upper tool, upper beam -Tool: comes from a Fasti type 211-32-2.5 folding machine -Transfer in current condition as seen -partially damaged -Pointed tool -Dimensions: 75 x 15 mm -Length: 3041 mm -Weight: 23 kg

Fold former, folding machine, form folding machine, profiling machine, profiling system -Max. Working width: 1260 mm -Profiling stations: 7 -Sheet thickness: max. 1.0 mm -2x set of rollers -Motor: 0.55/3.6 kW -Connection: 400 volts -Dimensions: 3150/1100/H1200 mm -Weight: 1700 kg

Binding format: max. 435 x 305 binding thickness: 0,1 - 50 mm output: Stück/h - Automatic glue application - Roughening roller PGO Gluing processes: max. 450 pieces/hour Books: max. 180 pieces/hour Roughening: Yes, with PGO Binding thickness min./max.: 0.1 - 50 mm Binding format max.: 435 x 305 mm Thickness of the binding material max.: 400 g/sqm Connection value: 220-240 min./max. 50Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used chocolate tank made by Faspoma, capacity of 3500 L. New 1993. Tank with agitator, heating jacket, has 2.2 kW motor, 705 rpm, CPA 43 pump, control cabinet. Piping within the tanks and platform to the tanks. Very good condition. 3 pieces available.

Vacuum Oil Filtration Hourly output 600L oil daily output 4800L Total power consumption E.L.72kw AMMA Filter 3,5M2 + spare Recommendations, HR cleaning, transformer oils, diesel, used cooking oils The technology of purely physical distillation at low temperature and microfiltration purification was chosen for the DTS device. It allows to quickly separate from the waste oil all types of contaminants such as moisture, oxides, metal impurities, carbon residues, colloids, suspended and emulsified substances, completely restore the physicochemical parameters (ie viscosity, PH value and flash point) of the waste oil so that met the standards and was exactly the same as the brand new oil.

Case making table Make Fastbind Model Casematic H46 pro Year 2006 Max size 750 x 476 mm Details with board alignment, with central light for the title, with cover cutter, with vacuum, with turning/in roller Available direct

Key data: 2040 mm, 2 mm

Max. bending length: 2040 mm Max. sheet thickness: 2 mm steel Upper beam adjustment motorized via foot switch Honeysuckle Notes Weight: approx. 1500 kg

Key data: 1020 mm, 2 mm

Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Upper beam can be swung out Bending angle adjustable via potentiometer Lifting height can be pre-selected via scale Manual and automatic bending mode possible Weight: approx. 650 kg

sheet width: 2040 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,50 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 0,500 t dimensions of the machine ca.: m Upper beam can be swung out Bending rail ground The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.