fas 480 used for sale

Parts Entfettungs-car wash using cold cleaner (water dilutable) system runs in circulation with foot operation with 1 / 2 cleaning brush pump with the foot switch from the Fassvorat detergent. Operation at 230V immediately on supply of detergent in use.

MAZAK laser cutting machine STX510 MKIII 4kW TOP CONDITION - LIKE NEW - ONLY 700 RUNNING HOURS year: 2012 refurbished, MAZAK lasercutting machine with 2500W table size: 3000mm x 1500mm machine dimension 2,9m x 7,3m chip conveyor LAN / USB connection automatic nozzle change fast piercing in heavy materials piercing sensor plasma sensor for stainless steel cutting burning sensor for mild stelle cutting full covered machine table FE: 22mm VA: 15mm ALMG: 10mm plastics possible to cut incl. software incl. exhauster option: warranty, setup, training option: fully automatic loading/unloading CELL system

Re circulation pump, used Horizontal type NPR 500 system KÖSTER Manufacturer Ritz Atro Built in 1992 Temperature of pumped liquid of 40 ° C Flow 240 l / s Pumping height 1.00 m Power 3 kW Pump speed 480 min Direction of rotation of the impeller left TMU submersible motor drive type Performance of the drive machine 4 kW Installation type horizontal Sufenzahl 1 Axial impeller shape Number of propeller blades 5 adjustable More info and photos on request.

The frames and skin are in a good, very good condition. Parts with new finply. 40x Framax 1,35x2,70m 22x Framax 0,90x2,70m 8x Framax 0,60x2,70m 8x Framax 0,45x2,70m 8x Framax 0,30x2,70m 10x Framax 0,90x2,70m Uni 4x Framax Insidecorner 2,70m 4x Framax Outside corner2,70, 312x Framax RU Clamp 20x Framax Universal fixing bolt10-16cm 24x Framax wedge clamp 12x Framax Universal walling 0,90m 12x Framax Universal walling 1,50m 20x Framax bracket 90 5x Panel strut 340 2x Framax lifting hook 210x tie rod 1,00m 420x super plate 15 2x Doka Box 1,20x0,80m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All t ...

Frame press Maweg Size: 400 x 240 cm hydraulic 3 vertical cylinders 2 horizontal cylinder Built in 1984 Weight approx. 2500 kg L x W x H: 480 x 110 x 270 cm The machine is in good condition, ready to use. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Properties < b >: < / b > Used Roller converter of manufacturer Overbeck Feet to be ordered separately Condition: fully functional with traces of use Ideal for the fast material handling Expertly disassembled and packed Interroll motor roller v-belt drive maximum width 68cm packages that can be implemented to converter < b > < /b > Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data < b >: < / b > Mass of the roller length: 2000 mm Total width: 600 mm Segment length: 750 mm the role < /b > details < b > Clamping length: 450 mm Diameter approx: 50mm Length: 100mm Material: Steel, galvanised the framework < /b > details < b > Frame height: 135mm Frame width: 30mm Ma ...

- Arbeitbreite 250 mm - max. Hobelhöhe 180 mm - Tischlänge 1085 mm - 3-Messerwelle inklusive 3 HSS Wendehobelmesser - Drehzahl 4800 U/min. - Motor 2,8 PS / 400 V - Abrichtanschlag 0C-45C schwenkbar - Absaugstutzen Durchmesser 100 mm - Abmessungen L=1500, B=500, H=900 mm - Gewicht 190 kg - Aluminiumanschlaglineal, neigbar und ordentlich feststellbar - Aluminiumschutz über der Messerwelle (Arbeitsschutz) - seitlich aufklappbare massive Graugusstische - stabiler Unterbau für hohe Standsicherheit - Vorschub wahlweise abstellbar - komfortable Schalter-Stecker Kombination - Stahlblech-Spänehaube für Dickenhobelbetrieb umklappbar - Absaugschlauchanschluss FI 100mm - optimal gelagerte Ein- und Auszugswalzen für optimalen Anpressdruck - Dickentischsäule selbstreinigend - einfaches Einstellen der Dickentischhöhe mit Handrad

The engine was mounted in a lathe. With motor base to align and fasten. Cabinet size T x B x H: 470 x 1200 x 1000 mm Engine size T x B x H: 1000 x 1100 x 1000 mm plus control with potentiometer for variable speed Pully-size: 180 mm Diameter of shaft: 50 mm v-belt pulleys Total weight: approx. 500 kg A total of 2 PCs. EURO-pallets With manual and electronic schema

Size max 480 x 320 mm Speed max 18,000 c / h Equipment 1 feeder 3681

- Hobelbreite 20 - 230 mm - Hobelhöhe 20 - 200 mm - Sägebreite 60 - 190 mm - max. 5 Sägeblätter pro Sägewelle - min. Sägedicke 5 mm - 6 Spindeln - Spindel Hobelwellen FI 40 mm - Spindel Sägewellen FI 50 mm - Drehzahl Hobelwellen 6000 U/min - Drehzahl Sägewellen 6000 U/min - Vorschubgeschwindigkeit stufenlos 5 - 30 m/min - Abrichtwelle, unten max. Werkzeug FI 110 - 145 mm - Rechte Vertikalwelle max. Werkzeug FI 110 - 200 mm - Linke Vertikalwelle max. Werkzeug FI 110 - 200 mm - Dickenwelle, oben max. Werkzeug FI 110 - 200 mm - Rechte Sägewelle max. Werkzeug FI 180 - 280 mm - Linke Sägewelle max. Werkzeug FI 180 - 280 mm Spindelfolge: 1. unten 11,0 kW 2. rechte vertikal 11,0 kW 3. linke vertikal 11,0 kW 4. oben 11,0 kW 5. rechte Sägewelle 22,0 kW 6. linke Sägewelle 22,0 kW - Motor Vorschub 7,5 kW - Motor Höhenverstellung 1,1 kW - Gesamtleistung 96,6 kW - Aufgabetischlänge 20 ...

Hitachi chain moulder 110 V This article is in good working condition. The chain size is 30 mm and is out of focus. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for fences, sheds, huts, restoration and much more.

; Delivery time is about 10 weeks

Magurit Fromat 042 eco, frozen meat cutter with manual lift, cutting dimensions up to 480mm x 250mm x 750mm, processing temperature -25°C. You are very welcome to test the machine in our facility in Koblenz, Germany.

Makita chain moulder 7101, 110V This article is in good and working condition. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for timber-frame houses, sheds, huts, restoration and much more.

Threaded drill M1 - M10 Motor 0, 22 + 032 kW Engine rpm 1420/ 2770 Spindle RPM 480-580 Weight 100 kg

- Motorleistung Drehstrommotor 4 HP 3 kW - Motorleistung Einphasenmotor 3 HP 2.2 kW - Motordrehzahl 2800 [...] - Durchmesser Sägeblatt FI 350 mm - Durchmesser Sägeblattbohrung FI 30 mm - Wellenmass FI 25 x 80 mm - Absaugstutzen in der Saegeblattabdeckung FI 60 mm - Absaugstutzen in der Absaughaube FI 100 mm - Ausmaße Arteitstich 975 x 1580 mm - Schnittbreite FI 350 20 x 550 mm - Schnittbreite FI 400 100 x 545 mm - Schnittlänge bei max Stärke FI 350 100 x 480 mm - Schnittlänge bei max Stärke FI 400 125 x 450 mm - Max. Schnitthöhe FI 350 100 mm - Max. Schnitthöhe FI 400 125 mm - Max. Sägeblattabstand vom Tisch FI 350 70 mm - Max. Sägeblattabstand vom Tisch FI 400 45 mm - Schnitthoehe bei 45C FI 350 60 mm - Max. Schnitthoehe bei 45C FI 400 80 mm - Max. Schnitthoehe bei 45C rechts 20x380 > 100 x 330 mm - Max. Schnitthoehe bei 45C links 20x190 > 100 x 140 mm - Nettogewicht 180 Kg - ...

Technische Daten: - Doppelte Gehrungen    45C - Einfache Gehrungen, bis    90C - Arbeitsbreite, max.    100 mm - Arbeitshöhe, max.    160 mm - Querschnitt, max.    65/65 mm - Maßskala bis    1.500 mm - Nettogewicht    90 kg Beschreibung: Für Bilderleisten und Möbelleisten mit Falz Morsö F schneidet doppelte Gehrungen von 45C und einfache Gehrungen bis zu 90C. Im handwerklichen Gebrauch ist die Maschine auch zum Schneiden von Zapfen, Einschnitten, überdeckten Gehrungen etc. sehr geeignet. Die Morsö F arbeitet mit Messern \"im ziehenden Schnitt\" (nicht rotierend). Sie arbeitet, ohne Staub zu produzieren. Der Schnittabfall wird über eine Rutsche von der Maschine weggeleitet. Morsö F wird über ein Fußpedal bedient und benötigt weder Kompressor noch Elektrizität, d. h., mit der Morsö F kann fast überall gearbeitet werden. Morsö F garantiert einen spiegelg ...

Why manufacture small parts on large, expensive CNC machining centers when it does a small CNC machine for a fraction of the price as fast and true to size ? Brass, copper , steel, stainless steel and many other materials can be processed . See information and seek non-binding offer or view a demonstration at our premises , personalized with your material and your record !; ready for operation

-mit Fußbedienung, -verschiebbarer Längseinstellung, -Maßskala, -Anschlägen links und rechts des Messerkopfes 45C-90C einstellbar, -verstellbaren Auflagen für Falzprofile -mit Kombinationsmesserkopf (Gehrung und Sprossen), -1 Satz Sprossenmesser (10 - 18 mm Nackenbreite), -Arretierungsschraube mit Klemmhebel und Anschlaglineal -Mit dieser Maschine erreicht man einen spiegelglatten sauberen Schnitt - doppelte Gehrung von 45C, einfache Gehrungen bis 90C. -Die Auslösung des Schneidevorgangs geschieht mittels Druck mit dem Fuß, wobei die Hände freibleiben. -Dank eines besonderen Hebel-Getriebes ist nur ein sehr leichter Druck erfolderlich. Die Messer sind aus feinstem, gehärtetem Stahl bester Qualität hergestellt. Technische Daten: - Doppelte Gehrungen    45C - Einfache Gehrungen, bis    90C - Arbeitsbreite, max.    100 mm - Arbeitshöhe, max.    160 mm - Querschnitt, m ...

480 m2 steel construction stage used, good condition, see pictures Length approx. 21 m Width approx. 23 m Height lower edge 2.45 m Height top edge 2.9 m fastened with screws and nut Grid distances adjustable in length without shelf shelves Negotiation price: € 14,000.00 net from stock Disassembled and loaded from stock Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 3000 lfm pallet racks in stock by numerous manufacturers Changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock Purchase / Sale We are looking for, or offer numerous items from various areas on an ongoing broom-pure company clearances Operational resolutions Fast- flexibl ...

Hydraulic C-frame press Tool testing press / straightening press Pressure power hydraulic unit approx. 400kg/cm2 Printing capacity of the press approx. 270to Partially overhauled! Hydraulic cylinder sour overhauled, recoat Table clamping area 1.300x500mm Flat of the printing plate 700x400mm Number of T-slots 2 pcs with width 22mm Piston rod diameter 290mm maximum installation height 750mm Piston path 350mm Extension C-frame to center piston 270mm Extension C-frame to front edge pressure plate 480mm Width C-frame 500mm Aeussere Dimensions Depth 1,800mm Width 1,300mm Rxvukelzy Height approx. 3,000mm Weight approx. 5to Rest according to photos Special price

Almost unused used CNC rotary axis from ISEL Automation ! By exception, a competitor's product. From a payment of a complete CNC fraes machine from ISEL due to the switch to a T-Rex CNC Fraes machine from CNC-STEP Top exact product, solid, stable processing. A few years old but top in shot. 100mm Holder for chuck 23mm Throughlet Height 320mm Width: 21 0mm Stabile cast aluminum discharge 4 Screw fasteners on the foot step motor 6.0 Ampere ! Controltable up to 48 volts Please also note our other CNC machines offers;

Model: Starmatic type: K080-xx5 Model: 900-24-480-8-6-130 built: 1992 Performance: 34.000 bottles / h Direction: right machine Feeding: parallel Aggregate: Hull PWL410, back PWL410 Glue roller: steel glue roller Management: 2 x inlet star, 2 x outlet star Labels-L =: min. 50mm, 180mm Bottles-D =: min. 50mm, 125mm Voltage: 220/380 V Labels: Body, chest, back from the site: "as is" condition in a functional State or from site: outdated State with 12 months warranty Machine dimensions: 2.20 x 1.80 meters. The dimensions refer to the base without excess of aggregates and spout extension

High-quality construction Drive roller is crowned (thus the sanding belt centered automatically centered on the role) and fully Vulcanized for longest life and best smoothness Tool-less and allow fast, easy change of the sanding belt Stepless height adjustment for optimal setup of the belt sander on the user Free adjustable metal fence to the optimal and safe guide workpieces during use of the large plan grinding area Speed design optimized for burning of the workpiece during the machining can be excluded as far as possible Models with fume control system equipped with robust and flexible suction hose Motor protection switch with CEE collar Steckvorrichtung incl. phase inverter 5 year warranty on the motor 1 year warranty on the belt sander Strap length: 2000 mm Band width 75 mm Plan grinding range 600 mm Speed 15/30 m/s RAL 9007 colour Motor three-phase 400 V 3.0/3,75 kW Suction capa ...

The NEXUS of 7501 is the cheapest universal hardness testing machine with currently available technology: This hardness testing machine sets the benchmark in quality and price in the device class with proven swivel mechanism (motor switch between Indenter and lens): never get a comparably-equipped machine of this quality at such a fair price. In the standard version are already integrated: USB camera + software for the automatic measurement of impression of hardness -electronically controlled test load application with load cell in closed-loop -integrated boxed PC (WIN 7), LAN connectivity, result export, hardness testing software IMPRESSIONS -integrated touch-screen monitor for a simple, direct touch control -LED lighting, Brinell with ring light The machine is universally suitable for all classic metal hardness testing (test loads 0.5 250 kg). Due to the modern, quality equip ...

- The classic must press nominal power up to 180 kg/h engine power press 1.1 (1.5) Muehle 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (Electrical connection 400V 50Hz (Electrical connection 400V 50Hz ( 3 phases) Electrical fuse 16 A Laenge 1000 mm width 900 mm Height 1700 mm Hehe Assumption 1770 mm Weight 216 kg material Polystyrene, basket and Muehle in 1.4301 / AISI 304 Press force 16.1 to Press pressure 320 bar Juice yield up to 65% connection for juice drain 30mm High juice drain 480 mm High marc ejection 580 mm Supplied 1 press bag 60l, 3 inserts 38cm, 3 press inserts made of acacia wood 38cm ; New machine - best condition

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

Working width: 4800 mm N. of heated sections: 22 N of decks: 6 complete with automatic loading and un loding systems

Magurit Unicut 555 frozen meat cutter / dicer, with lift, cutting dimensions up to 480 mm x 250 mm x 650 mm, processing temperature -25°C, knife head with 18 knives You are very welcome to test the machine in our facility in Koblenz, Germany.

This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. Processing of the cable pages at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are is carried out in the two-blade system either both knife independently to adjust continuous or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical

Magurit Fromat 042 frozen meat cutter with lift, cuttung dimensions up to 480 mm x 250 mm x 750 mm, cutting temperatur up to -25°C, capacity up to 1,500 kg/h, 4 kW You are very welcome to test the machine in our facility in Koblenz, Germany.

Blumer MCB III - label punching Technical Details · Max format : 700 x 1000 mm, · Min punched format : 10x10 mm, · Max punched format (non stackable)250 x 700 mm, · Max label format–stackable 150x 150mm, · Stack height : approx 50 / 80mm, · Punching pressure : 20tons, · Punching tool height:30 – 80mm. Additional Information · Delivery time IMMEDIATELY · Typ: MCB III · Year of man. 1988 · Condition: excelent · Located: Zagreb, Croatia Description · BLUMER MCB 3.1 PUNCHING MACHINE. The MCB 3.1 can punch any formats from paper, plastic, textiles, aluminium foil etc with fast program speed and high precision. Programming is via a freely programmable CNC, Storage capacity : approx 100 programs containing about 200 label positions each , numerically programmable. Machi ...

Magurit Fromat 042 profi frozen meat cutter with lift, cuttung dimensions up to 480mm x 250mm x 750mm, cutting temperatur up to -25°C, capacity up to 1,500 kg/h, 4kW. You are very welcome to inspect the machine in our facility in Koblenz, Germany.

Blumer MCB III - label punching Technical Details · Max format : 700 x 1000 mm, · Min punched format : 10x10 mm, · Max punched format (non stackable)250 x 700 mm, · Max label format–stackable 150x 150mm, · Stack height : approx 50 / 80mm, · Punching pressure : 20tons, · Punching tool height:30 – 80mm. Additional Information · Delivery time IMMEDIATELY · Typ: MCB III · Year of man. 1978 · Condition: excelent · Located: Zagreb, Croatia Description · BLUMER MCB 3.1 PUNCHING MACHINE. The MCB 3.1 can punch any formats from paper, plastic, textiles, aluminium foil etc with fast program speed and high precision. Programming is via a freely programmable CNC, Storage capacity : approx 100 programs containing about 200 label positions each , numerically programmable. Machi ...

OBSS 100 Spindle belt sander Working table length 430 mm Work table width 410 mm Speed 2000 min¯ ¹ Grinding sleeve diameter 13, 19, 26, 38, 51 mm Spindle diameter 12.7 mm Oscillation stroke 16 mm Oscillation 58 min¯ ¹ Belt length 610 mm, belt width 100 mm Bandumlaufgeschwindigkeit(en) 8 m/s Surface length 220 mm, width 100 mm Supply voltage 230 V 50 Hz Suction nozzle diameter 38 mm Length 480 mm, height 530 mm, width / depth 480 mm Weight 12 kg G &amp; pieces 5903501 Option: Stand with door

We offer a powered shears roller conveyor for sale. The length is variable: 3275 mm 8735mm max. Roll width 760 mm. Suitable for distribution centers and depots for the loading and unloading of trucks, containers and wagons. Stepless height adjustment. A very simple drive into various types of vehicles for its fast and safe loading and unloading. After use, can be easily folded away to save the space in the warehouse. Technical data: Length retracted: 3275 mm Length extended: 8735 mm Width: 760mm Adjustable height: from 730 to 1040mm Rows of rollers: 67 units Three-phase motor 120W Speed: from 5-35M / min. Control Panel x 1 piece Panel x 1 piece maximum load: 80kg / M Number available: 4 PCs. Net price: â?¬7750 / piece Delivery possible. Please specify your postal code and directly ask.

10,000 pieces of grating gratings for pallet shelves galvanized Insertion grids available in different sizes, mesh widths, support rod and weight load: Negotiation price: from € 5,-- net per piece from stock Price with € 5,-- refers to the insert ingerate with the size 24.5 x 104.5 cm Larger quantities on request! Insertion grid Mesh width 80 x 89 cm 2.5 x 2.5 cm 99.5 x 49.5 cm 3 x 3 cm 99.5 x 99.5 cm 3.5 x 3.5 cm 100.5 x 98.5 cm 4.5 x 1.1 cm 104.5 x 24.5 cm 6.5 x 3 cm 108.5 x 111 cm 6.5 x 6.5 cm 120 x 89.5 cm 7 x 3.5 cm 120 x 109 cm 7 x 4.5 cm 125.5 x 59 cm 7 x 7 cm 128.5 x 81 cm 129 x 118 cm support rod 132.5 x 111 cm 20 mm x 2 mm 134 x 76.5 cm 25 mm x 2 mm 134 x 92 cm 30 mm x 2 mm 134.5 x 99.5 cm 35 mm x 2 mm 134.5 x 122 cm 40 mm x 2 mm 143.5 x 124 cm 45 mm x 2 mm 157.5 x 81 cm 170 x 150 cm 179 x 121 cm Used goods, very good condition, see  ...

Properties Used belt conveyor of manufacturer TRANS standard Color: Silver Feet to be ordered separately Incl. SEW motor Incl. Guide Material: Steel Ideal for the fast material handling Expertly disassembled and packed Condition: fully operational 1 STK. in stock Belt conveyors The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Mass of the belt conveyor Overall length: 1.820mm Total width: 970 mm  ...

Properties < b >: < / b > Used belt conveyor Color: grey SEW geared motor available Feet to be ordered separately Material: Steel Ideal for the fast material handling Expertly disassembled and packed Condition: fully operational Technical data < b >: Mass of the belt conveyor < /b > Overall length: 1,040 mm Overall width: 700 mm the belt < /b > details < b > Belt width: 600 mm Belt type: smooth the framework < /b > details < b > Frame height: 160mm the motor < /b > details < b > SEW-EURODRIVE Type: R27 DT90S4/BMG/HR kW: 11 Belt conveyor < b > < /b > The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. During transport, the belt conveyor can promote sensitive and different-sized containers, boxes or other packaging and a ...

Euro-Pool Grid Box 800 x 1200 mm New goods, see pictures. External dimensions 1,240 x 835 x 970 mm Internal dimensions 1,200 x 800 x 800 mm Capacity 1500 kg Weight 70 kg Weight 70 kg Load 6,000 kg Colour grey Stack height nested 20 Stack height unnested 5 according to UIC standard 435/3 The front side is foldable. One half is open from above the other half is open from below (see pictures). Price: € 109.00 net per piece from stock Larger quantities on request Goods are in stock. Transport possible on request. Visit possible at any time by appointment. More information on request. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or offer numerous items from various areas on an ongoing broom-pure co ...

The BV tests are intended for the detection of biological substances, including botulinum neurotoxins A, B, E and F, staphylococcus enterotoxina A and B, ricin and anthrax spores. BV tests use a sandwich immunoassay format. An anticoerper specific to the pathogen to be measured is immobilized on microparticles. The other anticoacher is labeled with BioVeris' BV-TAGTM label. The sample is mixed with these reagents. When the specific pathogen to be measured is present in the sample, both anticoerpers bind to it and effectively connect the microparticles, the organism and the BV-TAG marker. The reaction mixture is then transported with an assay buffer to a flow cell with an electrode that stimulates the bound BV-TAG label to emit light. Only BV tests provide this unprecedented sensitivity and accuracy. BioVeris M1M Analyzer Incl. Toughbook Panasonic Mod. CF-29HTP44BM Kunstoff Tra ...

Year issue: 2017 - new Capacity: 20,000 cph, complete stainless steel Product: energy drinks and juice Can: 250 ml. Type of can: 202/200 slim can Heating method: Steam - Plate heat exchanger in outside of pasteurizer Material: Stainless steel AISI 304 1. TECHNICAL CHARACTERISTICS OF THE PASTEURIZER Temperature of product (inlet temperature) in pasteurizer: 2? - +6? Temperature of product (outlet temperature) from pasteurizer: +27? - +30? Pasteurizing temperature: +72? - +75? Holding on pasteurizing temperature: 12.5 min Heat consumption (steam by 3-4 bar) during stable operation: 480-550 Kg/h Temperature of steam: +140? Water consumption during stable operation: 0.5 - 0.9 m3/h. Consumption of compressed air 6 bar: 500-700 nl/h Total power consumption: 30 kw Supply voltage: 3F/N/PE/A, 50Hz, Control voltage: 400 volts Degree of protection: IP-54  ...

Properties: Used wheels car converter of manufacturer Mannesmann Demag Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed 7 STK. in stock Price per PCs. Converter Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data: Mass of the roller Overall length: 935mm Total width: 920 mm Information on the role Clamping length: 430 mm Diameter approx: 50 mm Material: Steel, galvanised Information on the framework Frame height: 135 mm Frame width: 30 mm Material: Steel Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unl ...

Snack station / cover station For fast and flexible application! Model: 260 Stainless steel application cooling range +2 to + 8C Circulating air cooling HACCP compliant with protocol system Automatic defrostising is ready plug-in TOP Quality! Immediately available

Drive: 1.1 KW weight: 70 kg Dimensions: L 650 mm x W 500 mm x H 1700 mm -&gt; fast-running fan mill. 2 identical Mills available.

Many thanks for your interest on our second hand machines, please find follow our offer: Complete Waffle production plant, consiting of: manufacturer : Danger Wafer oven Type : WM 52 plates YOM : ca. 1975 - 1980 heating : natural gas or propane waffle sheet : 470x290 mm deep karee different : automatic sheet take off : Cooler and Fully automatic Hebenstreit WZ-EM wafer spread line for two colours manufacturer : Hebenstreit Type : WZ-EM YOM : 1991 output capacity : up to 50 sheet/min. wafer format : 290 x 470 mm bis 350 x 480 mm dimensions : ca. 11000 x 1300 x 1700 mm different : Film- und Kontaktstreichverfahren consisting of: - wafer magazine - First WZ Cream station - cover station - second WZ cream station - stack station - cover station - Pressing device We offer this machine in 'as is' condition, without warranty, ex Ware ...

TOP Professional content 6 litres temperature adjustable to 60C GN- Behaelter and stainless steel lid easy cleaning Our temperature control is a fast, flexible and simple helper. Thanks to the dry heating, no precautions have to be taken. Chocolate warming plug s in and off! Immediately available! ;

Drive: 1.1 KW Weight: 70 kg Dimensions: L 650 mm x W 500 mm x H 1700 mm -&gt; fast-running fan mill. 2 identical Mills stock.

Manufacturer: Expert Systemtechnik GmbH Make: cutEXPERT Type: Variojet Year of manufacture: 2009 Features: single table with the dimensions: length = 6500mm; Width = 3300 mm; Height = 1850mmGewicht: 1500kg Power consumption: 7,0 kW Cutting head number 2 manufacturer: AllfiType: V high SpeedHochdruckpumpe : Manufacturer: UhdeTyp: HP19/37-SBaujahr: 2009 Capacity 3, 8 l / min Design pressure: 4000 bar Motor power: 37kW Weight: 1450kg Single table, work room (cutting edge) dimensions: Length = 2200 mm; Width = 1300 mm; Height = 200 mm Special features: · Programmatically, motorized adjustment of the head distance. No tedious, manual adjustment necessary. Minimization of set-up time and avoid errors · Machine designed for high workpieces (up to 200 mm). Ideal for the cutting of foam materials. · Ergonomic software: simple and very fast creating of cutting programs, tak ...

The frames and skin are in a good working condition with used X-Life and parts of it are new with Fin-Ply. 6x Framax 2,40 x 3,30m 66x Framax 1,35 x 3,30m 27x Framax 0,90 x 3,30m 45x Framax 0,60 x 3,30m 8x Framax 0,55 x 3,30m 2x Framax 0,50 x 3,30m 14x Framax 0,45 x 3,30m 15x Framax 0,30 x 3,30m 1x Framax Uni 1,20 x 3,30m 4x Framax Uni 0,90 x 3,30m 22x Framax Inside corner 3,30m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All the connectors and accessories fit seamlessly into this grid – making for fast forming-times and high efficiency. Rapid working as so few worksteps are involved forming ...