fas 480 used for sale

-with barrel clip for grabbing standing 200-litre steel sicken barrels and 110 to 220-litre plastic L ring barrels and lid barrels -Brace with attachment to adapt to different barrel sizes -with a wide chassis to cross euro pallets or to line reception tubs for 1 to 2 barrels -Hand hydraulics for slightly lifting the barrel -Built in 2008 -Load: 300 kg -Lift range: 120-700 mm -Mass BxHxT: 830 x 1550 x 1100 mm

Very fast running agitator 0.25 KW - 3400 rpm. with aluminium propeller 300 mm Electric motor: Used electric motor 0.25 KW, 3 x 230/400 volts, n = 3,400 rpm, Weight approx. 10 kg. With motor protection plug. Wave: Precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material stainless steel 1.4301. Rigid clutch made of aluminium. Stirring organ: Two-flyer aluminium propeller d = 300 mm.

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 30 to Stroke: (stepless) up to: 900 s/min Execution: 4 supports Table surface: Length: 425 mm Width: 350 mm Table relieving: Diameter: 85 mm Slide stroke: 10 mm slide bore diameter: 38 mm Passage between the supports: longitudinal: 455 mm Voltage 50 Hz 3x: 380 Volt Power: 5.5 kW Machine´s weight about: 1950 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 2000 mm Various accessories: Automatic feed: number: 1 Execution: rolls Electro-pneumatic clutch Security/savety device

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 34925 Technical data Pressure: 60 to Stroke: (stepless) from: 70 s/min up to: 800 s/min Execution: 4 supports Table surface: Length: 770 mm Width: 620 mm Thickness: 120 mm Table relieving: Length: 580 mm Width: 100 mm With pressing power: downside up Slide adjustment: 80 mm Stroke adjustment: from: 20 mm up to: 76 mm Slide clamping surface: Length: 700 mm Width: 456 mm Passage between the supports: longitudinal: 650 mm Lateral: 260 mm Air connect: 6 - 10 bar Voltage 50 Hz 3x: 400 Volt Total power required: 41 kVA Machine´s weight about: 7600 kg Overall dimensions machine: Length: 2600 mm Width: 2100 mm Height: 2200 mm Various accessories: Belt feeding: SOPREM Workpiece conveyor Sound insulation cabin Chip conveyor

Technical data Pressure: 32 to Stroke: (stepless) from: 80 s/min up to: 400 s/min Execution: 4 supports Table surface: Length: 420 mm Width: 380 mm Tool height: 300 mm With pressing power: upside down Slide adjustment: 50 mm Stroke adjustment: from: 6 mm up to: 50 mm slide bore diameter: 32 mm Slide clamping surface: Length: 420 mm Width: 380 mm Passage between the supports: longitudinal: 420 mm Lateral: 250 mm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 3000 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 2700 mm Various accessories: Automatic feed: number: 1 Execution: collets Draw-in left Electro-pneumatic clutch Upper extractor Stock reels with electric motor

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 15 to Stroke: (stepless) from: 200 s/min up to: 500 s/min Execution: 4 supports Table surface: Length: 320 mm Width: 250 mm Thickness: 60 mm Table relieving: Length: 250 mm Width: 140 mm Cut edge: 300 mm2 Slide adjustment: 60 mm Slide stroke: 24 mm slide bore diameter: 25 mm Distance table to slide nose: max: 211 mm Passage between the supports: longitudinal: 320 mm Lateral: 170 mm Voltage 50 Hz 3x: 380 Volt Power: 3.5 HP Machine´s weight about: 1800 kg Overall dimensions machine: Length: 1350 mm Width: 850 mm Height: 1950 mm Various accessories: Automatic feed: number: 2 Execution: rolls max. stroke: 100 mm Straightening device

Key data: 15 , 500

Capacity: 15 t Number of strokes per/min: 500   Table length: 0 mm Table width: 0 mm Technical data Pressure: 15 to Stroke: (stepless) from: 200 s/min up to: 500 s/min Execution: 4 supports Table surface: Length: 320 mm Width: 250 mm Thickness: 60 mm Table relieving: Length: 250 mm Width: 140 mm Cut edge: 300 mm2 With pressing power: downside up Slide adjustment: 60 mm Slide stroke: 24 mm slide bore diameter: 25 mm Distance table to slide nose: max: 211 mm Passage between the supports: longitudinal: 320 mm Lateral: 170 mm Voltage 50 Hz 3x: 380 Volt Power: 3.5 HP Machine´s weight about: 1800 kg Various accessories: Automatic feed: number: 1

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 400 to Stroke: (stepless) from: 12 s/min up to: 40 s/min Table surface: Length: 2500 mm Width: 1500 mm Slide adjustment: 100 mm Slide stroke: 300 mm Fixed stroke: 300 mm Slide surface: Length: 2500 mm Width: 1500 mm Distance table to slide nose: max: 800 mm Passage between the supports: longitudinal: 3240 mm Lateral: 1600 mm Air connect: 5.5 bar Total installed power: 40 kW Machine´s weight about: 70000 kg Overall dimensions machine: Length: 4300 mm Width: 2500 mm Height: 7000 mm

Technical data Pressure: 30 to Stroke: (stepless) up to: 900 s/min Execution: 4 supports Table surface: Length: 425 mm Width: 350 mm Table relieving: Diameter: 85 mm Slide stroke: 10 mm slide bore diameter: 38 mm Passage between the supports: longitudinal: 455 mm Voltage 50 Hz 3x: 380 Volt Power: 5.5 kW Machine´s weight about: 1950 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 2000 mm Various accessories: Electro-pneumatic clutch Security/savety device

Welding edge former, edge former, edge chamfering machine TRUMPF chamfers of steel plates for weld seam preparation type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10mm Bevel angle: 30 Power: 2000 Watt Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30 bevel angles - regrindable butt steel for high tool utilization - several impact steels - Support plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thicknesses For bevelling straight and curved edges with at least 40 mm radius. For bevelling edges on flat and curved workpieces as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg; used

Container fasteners, container securing elements -Fuses: 4 -Price: per piece -Weight: 6.5 kg/piece

Fastening clamp, 4 pieces TURCK BST-18B Ident- No. 6947214 for read/write heads Diameter: Ø 18 mm Material: plastic, PA6 Other quantities on request ! New ! Dimensions ( single mounting clamp ): 40 x 30 x 24 mm

Fastening clamp, 25 pieces OBO BETTERMANN 823 Pg21 Article number: 1015 214 pipe diameter: Ø 28,3 mm 2x slotted hole: Ø 6.2 x 10 mm Material: steel, hot-dip galvanized material thickness: 3.0 mm Other quantities on request ! New ! dimensions ( fastening clamp ): 74 x 20 x 30 mm Dimensions ( packaging ): 152 x 107 x 80 mm

Fastening clamp, 50 pieces OBO BETTERMANN 605 Pg48 Article number: 1018 604 Pipe diameter: Ø 60 mm 2x slotted hole: Ø 5,5 x 7 mm Material: Steel, galvanized Material thickness: 1.5 mm Scope of delivery: 2 individual packages with 25 fastening clamps each Other quantities on request ! New ! Dimensions ( fastening clamp ): 98 x 58 x 17 mm Dimensions ( individual packaging ): 200 x 120 x 110 mm

Assortment fastening clamps, 210 pieces PAGUS 23 - 47 mm 50x Clamping range: Ø 47 mm Dimensions (single clamp): 63 x 47 x 14 mm 100x Clamping range: Ø 23 mm Dimensions (single clamp): 53 x 23 x 12 mm 20x Clamping range: Ø 28 mm Dimensions ( single clamp ): 61 x 28 x 14 mm 40x Clamping range: Ø 28 mm Dimensions ( single clamp ): 47 x 28 x 14 mm Material: Steel, galvanized Material thickness: 1.0 - 1.5 mm Other quantities on request ! New ! Dimensions ( packaging ): 280 x 210 x 150 mm

Fastening rail, hot-dip galvanized PAGUS 320 mm Dimensions(one rail): 320 x 40 x 80 mm bores: Ø 13 mm slotted holes: Ø 13 x 92 mm New ! Dimensions: 320 x 120 x 80 mm

Mounting kit SMC 4x RHC-L032 2x RHC-F032 for high-performance cylinders, RHC series, piston diameter: Ø 32 mm New ! Dimensions ( packaging ): 150 x 90 x 70 mm

Fastening set SMC 4x CG-L025 7x CG-F025 for high-performance cylinders, RHC series, piston diameter: Ø 25 mm New ! Dimensions ( packaging ): 140 x 120 x 40 mm

Fastening element for wall mounting or panel installation, 2 pieces MESSGERÄTEWERK BEIERFELD TGL8701 Housing diameter: Ø 160 mm for pressure gauge according to TGL16374 and thermometer Ø 160 mm New ! Dimensions( packaging ): 200 x 200 x 30 mm

Fastening rail, hot-dip galvanized PAGUS 1000 mm Dimensions: 1000 x 40 x 80 mm Bores: Ø 14 mm slotted holes: 4x Ø 13 x 300 mm 2x Ø 13 x 260 mm 2x Ø 13 x 92 mm New ! Dimensions: 1000 x 40 x 80 mm

Grating mounting plate, retaining flange, 20 pieces HILTI X-FCM-M Disc diameter: Ø 52 mm grid height: 20 - 30 mm Grating width range: 18 - 30 mm female thread: M8 x 1.25, depth: 20 mm Material: stainless steel New ! Dimensions( single ): 53 x 52 x 27 mm Dimensions( packaging ): 250 x 110 x 60 mm

Hollow section fastener, hollow section fastening, for steel construction, 10 pieces BOXBOLT® BQ1Z12 Clamping range: 5 - 25 mm drilling diameter: Ø 20 mm screw: M12 x 1,75 Screw length: 55 mm Width across flats: 17 / 26 mm Material: Steel, galvanized New Dimensions ( single fastener ): 65 x 30 x 26 mm

Suspension for screwing down, fixed suspension, 34 pieces VAHLE FAS 1 310 500 for track S1 ( 30 x 32 mm ) bore diameter: Ø 8.5 mm bore distance: 60 mm Material: Steel, galvanized Other quantities on request ! New ! Dimensions ( single suspension ): 84 x 40 x 35 mm Dimensions ( package ): 300 x 220 x 100 mm

Barrel rack, barrel support, barrel pallet, barrel trolley, barrel tipper -Keg rack: keg pallet for 200 liter kegs -Recording: can be transported with a forklift, see photos -Number: 2x frame available -Price per piece -Dimension: 1300/800/H275 mm -Weight: 25 kg/pc.

Transport trolleys, pipe frame trolleys, drum trolleys, drum tippers -Barrel trolley: Barrel tipper for 200 liter barrel -Barrel support: 2 metal rollers Ø60 x 400 mm -Wheel equipment: 2 castors, 2 wheels -Bracket: for drip tray -Dimension: 990/610/H680 mm -Weight: 20 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Reisser, solar fastener 8.0 x 125 10 pieces/box -Type: RSB-A-8.0/M10x125/50 -Material: stainless steel A2/galvanized -Number: 38 boxes available -Price: per box -Dimensions cardboard: 285/90/H75 mm -Weight: 1.2 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Würth, solar facade construction screw with EPDM sealing washer 49 pieces/box -Type: BZ 8.0x150 M10x50 -Material: A2 stainless steel -Number: 3 boxes available -Price: per box -Dimension: 220/220/H80 mm -Weight: 4,8 kg/box

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Würth, solar facade construction screw with EPDM sealing washer 75 pieces/box -Type: BZ 8.0x150 M10x50 -Material: A2 stainless steel -Number: 2 boxes available -Price: per box -Weight: 9.7 kg/box

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Solar fasteners: hanger bolts M12 x 400 -Type: M12 x 400 SW 9 fully assembled -Material: stainless steel V2A -Number: 43 pieces available -Price: per piece / minimum purchase 5 pieces -Weight: 0.3 kg/pc.

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Solar fasteners: hanger bolts M12 x 400 50 pieces/box -Type: M12 x 400 SW 9 fully assembled -Material: stainless steel V2A -Number: 6 boxes available -Price: per box -Dimension: 420/200/H200 mm -Weight: 15.6 kg/box

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Solar fasteners: Hanger bolts M10 x 300 with adapter plate -Type: M10 x 300 SW 7 fully assembled -Material: stainless steel V2A -Number: 103 solar fasteners available -Price: per piece / minimum purchase 10 pcs. -Weight: 0.3 kg/pc.

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Solar fasteners: hanger bolts M10 x 300 with adapter plate 50 pieces/box -Type: M10 x 300 SW 7 fully assembled -Material: stainless steel V2A -Number: 15 boxes available -Price: per box -Dimension: 400/210/H220 mm -Weight: 14kg/carton

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Reisser, solar fastener 8.0 x 150 10 pieces/box -Type: RSB-A-8.0/M10x150/50 -Material: stainless steel A2/galvanized -Number: 109 boxes available -Price: per box -Dimensions cardboard: 285/90/H75 mm -Weight: 1.2 kg

Sparcatron HSW EDM fast hole driller Heidenhain control I bought it from major UK aero engine manufacturer (voltmeter and Ammeter removed by previous owner). 5 axis control Hoffmann EDM 4th 5th axis unit Machine operational 4,620 hrs use Set of machine manuals and diagrams Complete set of spare electronic panels and drives 300mm Z/electrode travel 0.3mm to 3mm Uses deionised water High pressure through electrode flushing Selling due to surplus to requirements/restructuring business Buyer to arrange decommissioning No loading facilities Ex works

Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners -Solar fastener hanger screws and adapter plates 350 kg -Hanger screws: M10 x 200 1632 pieces. -Adapter plates: 80 x 30 x 5,475 pieces / 80 x 40 x 5,673 pieces -Material: A2 AISI304 stainless steel -Levy/Price: complete -Dimension: 1200/800/H540 mm -Weight: 350 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners -Solar fasteners: Hanger screws fully assembled 1375 pieces -Type: M10 x 250 SW 7 -Material: A2 stainless steel -Price/tax: complete -Transport dimensions: 1200/800/H300 mm -Weight: 239 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners, end clamp -Solar fastener: end clamp -Type: AK 18-6160/50 H-42 mm -Module frame height: up to 42 mm -Material: aluminum -Quantity: 500 clamps -Price per piece -Minimum order: 50 pieces. -Dimension: 50/45/H27 mm -Weight: 0.01 kg/pc.

Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners, end clamp -Solar fastener: end clamp, box of 1000 pieces -Type: AK 18-6160/50 H-42 mm -Module frame height: up to 42 mm -Material: aluminum -Price/tax: complete -Transport dimensions: 400/200/H240 mm -Weight: 27.1 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners -Solar fasteners: Hanger screws fully assembled 900 pieces -Type: M10 x 300 240 pieces with adapter plate -Type: M10 x 250 440 pieces with adapter plate -Type: M10 x 200 420 pieces without adapter plate -Material: A2 stainless steel -Price/tax: complete -Transport dimensions: 980/670/H550 mm -Weight: 246 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners, end clamp -Solar fasteners: roof hooks, -Dimensions: see photos -Quantity: 66 hooks available -Price per piece -Minimum order: 10 pieces. -Transport dimensions: 240/130/30 mm -Weight: 0.4 kg/pc.

The matching fasteners for the agitator are offered in the other display. The fasteners are made of stainless steel and were previously installed in a tank.

Mounting kit, 5 pieces FESTO SMB-2 11887 Scope of delivery: 1x mounting bracket, 1x clamping screw, 2x fastening screw Material: Aluminum, Screws: Steel New !Material: Aluminum, Screws: Steelbr /br /New ! dimensions (mounting brackets): 34 x 26 x 22 mm dimensions ( packaging ): 100 x 90 x 60 mm

Mounting kit, 24 pieces FESTO SMBR 16x SMBR16, 19275, size: 16 mm 6x SMBR20, 19276, size: 20 mm 2x SMBR25, 19277, size: 25 mm New !, Size: 25 mmbr /br /New ! dimensions (packaging): 250 x 140 x 50 mm

Pumpe Fass More then 300 machines new and second hand on our seema .de

Description: The machine package offered here consists of two well-maintained STARRAG HECKERT HEC 500D XXL Horizontal Machining Centres and a Flexible Loading System for 20 workpiece pallets from the renowned manufacturer FASTEMS. FASTEMS Loading system Type: FPC-1000 Number of pallet spaces: 20 ,(10 top row & 10 bottom row) Number of set-up stations: 1 Number of machine connections: 2 Loading system dimensions (L x W x H) approx.: 14800 x 3767 x 4150 mm Max. loading capacity incl. pallet: 1000 kg Max. pallet loading dimensions (L x W x H): 950 x 950 x 1000 mm / Ø 1000 mm Horizontal Machining Centre (data per machine) Control and Machine numbers Control: SIEMENS Sinumerik 840 D Machine numbers: 16334 / 16335 Working area Number of simultaneous axes: 4 Pallet size: 500 x 630 mm Workpiece weight approx.: 800 kg Workpiece dimensions approx. (L x W x H) 950 x  ...

2-flügliges mixer - as new- Manufacturer: Ekato Type: DENI 480 S Serial number: 1348091-20 Working pressure: 1 bar Working temperature: 30 ° C Revolutions: 48 RPM Year of construction: 1999 Agitator was never in operation and is still there, as on the first day. Therefore in Very much good condition! New price: about 5.080,00

; ready for use

Indramat module NFD 02.2-480-016 Bosch Rexroth

Indramat modul NFD 02.1-480-008 Bosch Rexroth

Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video: abcs://youtu.be/NwSQ6DHySrU