We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,888 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Servo Amplifier Module, CNC Control System, plug-in card, -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A06B-6058-H334 -Dimensions: 450/250/H180 mm -Weight: 9.6 kg
used
AC Spindle Servo Unit, Servo Amplifier Module, CNC Control System, plug-in card, converter device, -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A06B-6055-H108 -Dimensions: 310/500/H300 mm -Weight: 35 kg
used
Servo Amplifier Module, CNC Control System, plug-in card, -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A02B-0094-B502 -with: 7x plug-in cards -Dimensions: 560/400/H255 mm -Weight: 12.2 kg
used
AC spindle motor, electric motor, DC motor, servo motor -Spindle motor comes: from a Hitachi Seiki type HC400 machining center -Manufacturer FANUC Model 10S Type: A06B-0315 -Power kW -Speed: 2000 rpm -Shaft: Ø 35 mm -Construction: B14 -Number: 3x motors available -Price: per piece -Dimensions: 430/174/H174 mm -Weight: 28 kg
used
AC spindle motor, electric motor, DC motor, servo motor -Spindle motor comes: from a Hitachi Seiki type HC400 machining center -Manufacturer FANUC Model 6 Type: A06B-1006-B700 -Power: 5.5/7.5 kW -Speed: 1500/6000 rpm -Shaft: Ø 32 mm -Construction: B14 -Brake -Dimensions: 700/260/H250 mm -Weight: 65 kg
used
Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Fanal, thermostat temperature switch unused in original packaging -Type: TBFR 112 spec -Temperature range: 18 to 55°C -Dimensions box: 220/120/H50 mm -Weight: 0.5 kg
used
Fanuc Robocut alpha-C600ib EDM Wire Cutting Machine Machine is in very good condition Maximum workpiece dimensions [mm]: 1050 Ã 820 Ã 300 Maximum workpiece weight [kg] : 1000
used
Singulus Emould 50 ton injection molding machine. (FANUG Roboshot) The machine worked in line with a CD/DVD machine. Electric injection molding machine, in good condition. FANOG control
used
Fanuc Engine comes from an X-axis milling machine
used
Pulse generator, handwheel, CNC control -Manufacturer: Fujitsu Fanuc, Pulse Generator -Type: A860-0200-T021 -Quantity: 2x Pulse Generator available -Price per piece -Dimensions: 122/122/H136 mm /140/120/H120 mm -Weight: 1.1 kg/pc.
used
CNC Wire EDM Machine FANUC MATRA ROBOCUT a-1iA5 Year of construction 2001 Travel: X-axis 520 mm Y-axis 370 mm U-axis 120 mm V-axis 120 mm Z-axis 310 mm Max. workpiece dimensions: 790 x 730 x 300 mm Max. workpiece weight 1,000 kg Wire diameter 0.1 to 0.3 mm Wire feed speed 250 to 2500 g Max. taper angle +/- 30°/ 80 mm Control: FANUC Series 16i-W Machine weight: approx. 2,600 kg
used
condor 2 fan dry cooler
used
Used Robot Palletizer Fanuc 2003 The Ultimate Solution for Palletizing Operations Are you looking for a reliable and efficient robot palletizer for your business operations Look no further than the 2003 Fanuc Robot Palletizer model M 410 iB 160 Equipped with a pick up head for cardboard and available base this palletizer is designed specifically for palletizing tasks With its intelligent cable routing inside the hollow wrist high operating speeds and high inertia and wrist moments this machine can handle large grippers and heavy payloads with ease Its 6 axis control servo gripper provides better adaptability in handling products of different sizes Operating within an optimized workspace and with high vertical travel this robot can develop pallets up to a height of almost 3 meters The integrated base and controller in the pedestal or the available non pedestal version saves floor space an ...
used
Used Robot Depalletizer Fanuc 2003 The Ultimate Solution for Depalletizing Operations Are you looking for a reliable and efficient robot depalletizer for your business operations Look no further than the 2003 Fanuc Robot Depalletizer model M 410 iB 160 Equipped with a pick up head for cardboard and an available base this depalletizer is designed specifically for depalletizing tasks With its intelligent cable routing inside the hollow wrist high operating speeds and high inertia and wrist moments this machine can handle large grippers and heavy payloads with ease Its 6 axis control servo gripper provides better adaptability in handling products of different sizes Operating within an optimized workspace and with high vertical travel this robot can depalletize products up to a height of almost 2 7 meters The integrated base and controller in the pedestal or the available non pedestal versio ...
used
X,Y,Z Travel 700,400,330 mm Table size 850x410 mm Spindle speed 10000 rpm Number of tools 14 With 4th axis KITAGAWA rotary table Controller Fanuc 31i
used
A robotic laser station for powder coating The position includes: - COHERENT laser head (10kW diode laser) - FANUC M710iC / 50 robot - TAKTOMAT rotary table (2000x1200 250kg positioner) - Chiller RIEDEL Net price! The stand was launched, not used and almost not used. Large surfacing width up to 32 mm, nozzles for 24 mm included.
used
Fanuc W3 wire EDM machine Journeys: X-750, Y-450, Z-300, U-50, V-50 Max cutting angle: 10 degrees Max workpiece weight: 800 kg Programmable axes: X, Y, Z, U, V Max dimensions of the detail - 700 x 950 x 300
used
X axis: 550 mm Y axis: 370 mm U axis: 120 mm V axis: 120 mm Z axis: 310 mm Fast forward (X, Y, Z / U, V): 900 mm / min / 450 mm / min Max work piece weight: 1000 kgs Power: 13 KVA Year 2002 Equipped with: Control: FANUC 180 iS-W Refrigerator: Yes
used
GD-12 - electric scheme - user manual - programming with error codes - technical instruction with drawings GLD-12 - electric scheme - technical instruction BAR FEEDER IEMCA SHOP - electric scheme - operating instructions (setting, parameters, errors) BAR FEEDER FMB SHOP - electric scheme - operating instructions (setting, parameters, errors) Additionally - an original cable for connecting a computer to the GD-12 and GLD12 via RS-232, if there is no RS-232 on your computer, you need a USB-RS-232 adapter. PC and machine communication software and all machine parameters. As well as: - user manual; - programming instructions; - electric scheme; - drawings of mechanics. this is the original documentation. a couple more unnecessary books and CNC documentation (this can be downloaded on the Internet in Russian) There are 3 main shops for shops - mechanics, electric ...
used
GLD-12 - electric scheme - technical instruction BAR FEEDER IEMCA SHOP - electric scheme - operating instructions (setting, parameters, errors) BAR FEEDER FMB SHOP - electric scheme - operating instructions (setting, parameters, errors) Additionally - an original cable for connecting a computer to the GD-12 and GLD12 via RS-232, if there is no RS-232 on your computer, you need a USB-RS-232 adapter. PC and machine communication software and all machine parameters. As well as: - user manual; - programming instructions; - electric scheme; - drawings of mechanics. this is the original documentation. a couple more unnecessary books and CNC documentation (this can be downloaded on the Internet in Russian) There are 3 main shops for shops - mechanics, electrics, instruction manual.
used
table length: - mm table width: - mm ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Submerged Wire FANUC ROBOCUT Alpha 1-ib with auto wire thread, Information about technical data are not binding., Machine available subject to prior sale., X-y-z axes travel: 550x370x310 mm, U-v axes travel: 120x120 mm, Taper angle: ± 30°, Automatic wire threading and rethreading: yes, Maximum workpiece dimension: 1000x800x300 mm, Cnc: FANUC 180is - WB, Filter type: Cartridge, Weight: 3.000 Kg, Accessories: Chiller unit
used
Fanuc Control Unit A06B-6047-H002
used
Type: MATRA TAPE CUT W2 Parameters: 500 mm, 350 mm Manufacturer: Fanuc Year of production / SO / GO: 1991 / - / - Description: The machine is in good technical condition. X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Voltage: 200V AC + -10%; three-phase; 50 / 60Hz Cooling water temperature: 10-25 ° C Water flow: 15-35 liters / minute Sold including: 1st filter SW37 D340xd46xH450mm - 3pcs 2.Savah RVH600 - anti-rusting workpiece - 5 liters 3.Eleion plus - resin to reduce the conductivity of working water - 50 liter barrel - full up to 3/4 volume 4. Various small spare parts - see. photo- Dimensions L x W x H: 3500 x 2400 x 2400 mm Weight: 2300kg Upon agreement, the possibility of a tour in progress.
used
Key data: 370 mm, 270 mm, 255 mm
Inv. Num. : 7378 Type: ROBOCUT Alpha-0iE Producer: FANUC Created: 2013, GO 2020 Parameters: Control system: FANUC Max. travel length of the X-axis: 370 mm Max. travel length of the Y-axis: 270 mm Max. travel length of the Z-axis: 255 mm Feed length in the U-axis ( -): 60 mm Feed length in the V-axis ( -): 60 mm Minimum wire gauge: 0.1 mm Maximum wire thickness: 0.3 mm Max. workpiece dimensions: 700 x 600 x 250 mm Max. workpiece weight: 500 kg Machine height: 1950 mm Machine length: 2200 mm Machine width: 1930 mm Machine weight: 1200 kg Equipment: Measuring instruments Software
used
Inv. Num. : 4060 Type: ARC Mate 120iB Producer: FANUC Created: 2007 Parameters: Control System: R30iA Hours: 985 h Axles: 6 Payload: 20 kg H-reach: 1667 mm Repeatability: ± 0.0800 mm Source: Kempi – KEMPARC SYN300 Mains voltage: +-10%: 3x400 Power: 320 A Weight: 220 kg Accessories: Robot with 2 separate workstations: Danubius positioner and clamping table Dust extraction: POC 20 Table Metal Fence
used
Inv. Num. : 5559 Type: ARC Mate 100iB Producer: Fanuc Created: 2007 Parameters: Control system: FANUC SYSTEM R-30iA Duty cycle: 2000 h Maximum arm reach: 1373 mm Number of axles: 6 pieces Maximum load capacity: 6 kg Source: MIGATRONIC FLEX 4000 Nominal current: 7 A Accuracy: 0.08 mm Machine weight: 135 kg External Wire Feeder Cleaning station Base Control panel and control panel Simple table design
used
Description: Serial number: 0089D3145 Incl. robot cell Interior dimensions: approx. 1300 x 1000 mm Incl. gripper from the manufacturer SCHUNK Approx. Onsite Dimension. (l x w x h): 2,500 x 2,000 x 2,200 mm, weight approx.: 700 kg
used
Description: clamping force: 350t daylight: 1250 minimum mold thickness: 300 - 650 tie bar spacing: (H x V) 810 x 710 platen size: (H x V) 1130 x 1030 clamp stroke: 600 ejector stroke: 200 ejector rod diameter: 28 mm screw diameter: 56 mm maximal injection volume: 640 ㎝³ maximum injection pressure: 225 MPa number ,of strokes approx. 3,500,000 number ,of injections is approx. 2,700,000 locating ring diameter (F:M) 160 hydraulic core (Fixed/Move) 0/0  , on switchboard picture are red marked modules that are missing in the machine machine was in operation before the cards were removed machine will be delivered with ,documentation, backup data not available, can be obtained from FANUC  , please also have a look at the PDF documents of this ,machine Approx. Onsite Dimension. (l x w x h): 8,000 x 2,750 x 2,000 mm, weight approx.: 14,600 kg
used
This FANUC ARC Mate 100i Robot machine was manufactured in 2000 in Netherlands. It has 6 axes and a payload capacity of 6 kg (13 lbs). It offers a reach of 1368 mm (54 in) with a repeatability of ±0.1 mm (.0039 in). It operates at the following motion speeds: J1-J3 at 120 °/s (2.09 rad/s), J4-J5 at 360 °/s (6.28 rad/s), and J6 at 450 °/s (7.85 rad/s). Its motion range includes J1 at -330°, J2 at -210°, J3 at -299°, J4 at -380°, J5 at -280°, and J6 at -640°. Contact us anytime for further information.
used
This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document).
used
This FANUC Robocut Alpha 0iE CNC Wire Cut EDM Machine was manufactured in 2013 and is equipped with a FANUC 31i-WA control. It has 5 axes (X-axis: 370 mm / Y-axis: 270 mm / Z-axis: 255 mm / U-axis: 60 mm / V-axis: 60 mm) and can operate with a maximum workpiece weight of 500 kg. In total it has operated 17,500 hours from which 4,850 are cutting hours.
used
Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,000 mm, weight approx.: 500 kg
used
FANUC ROBODRILL ALPHA D21 LiB5 CNC machining center manufactured in 2017 achieves outstanding efficiency and precision, even during the most demanding workpiece machining. The machine features an extremely stable design with a large working area, inside of which it incorporates, among others, a rotary table and an extremely powerful high-speed spindle. This is further complemented by the intuitive FANUC Series 31i-MODEL B5 CNC control, whose excellent optimisation and multitude of functions allow to maximise the efficiency of the machining process, while ensuring excellent results. To this date, the FANUC ROBODRILL CNC milling center has operated for a total of 1911 hours and has been used only for machining stainless steel. The total weight of the machine is 2200 kg. Technical specifications of the FANUC ROBODRILL ALPHA D21 LiB5 milling center - feeds in the X/Y/Z axis: 700/400/330 ...
used
Key data: 700 mm, 400 mm, 330 mm
Vertical CNC Machining Center/Drill Tapping Center CNC control Fanuc 16i-MB Table size 410 x 850 mm Table load 250 kg Number of pallets: 1 X-axis travel 700 mm Y-axis travel 400 mm Z-axis travel 330 mm 4. Axis (rotary table) 4+5 Spindle mount MAS BT 30 Spindle speed 10,000 rpm Magazine capacity 21 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.
used
FANUC ALPHA C600iA - 2014 Wire cutting EDM machine
used
[embed]https://youtu.be/tU4z-j-vDnw[/embed] FANUC ALPHA 0iB - 2003 Wire cutting EDM machine
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: 70.000 hours read from controller before machine was dismantled laser capacity: 3 kW, operating hours of laser: 70.000 h, weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 2,050 x 750 x 2,080 mm
used
Description: No. ES1501567 A, more details: see photos Approx. Onsite Dimension. (l x w x h): 500 x 300 x 300 mm, weight approx.: 21 kg
used
Description: No. 1044699, more details: see photos Approx. Onsite Dimension. (l x w x h): 420 x 250 x 200 mm, weight approx.: 7 kg
used
Description: No. F14 28479-B, more details: see photos Approx. Onsite Dimension. (l x w x h): 470 x 260 x 200 mm, weight approx.: 10 kg
used
Description: No. F15 26084-B, more details: see photos Approx. Onsite Dimension. (l x w x h): 450 x 170 x 150 mm, weight approx.: 4 kg
used
Description: No. N240519104, more details: see photos Approx. Onsite Dimension. (l x w x h): 450 x 260 x 250 mm, weight approx.: 6 kg
used
Description: technical data see pictures Approx. Onsite Dimension. (l x w x h): 900 x 850 x 450 mm, weight approx.: 50 kg
used
Description: Model 12P/8000, No. C915K0627, 200 V, 4-pole, 5.5/7.5 kW, 21/29 A, 750/8000 rpm Approx. Onsite Dimension. (l x w x h): 600 x 250 x 320 mm, weight approx.: 117 kg
used
Description: Model 10S, No. C915A4361, 150 V, 8-pole, 7.6 A, 12 Nm, 2000 rpm Approx. Onsite Dimension. (l x w x h): 350 x 180 x 210 mm, weight approx.: 20 kg
used
Description: type: A05B-1215-B651 serial number: R03X75249  , max. weight at wrist: 12 kg max. reach: 1441 mm  , number of axes: 6 working range: A1: 340° (370°) A2: 235° A3: 455° A4: 380° A5: 360° A6: 900° axis speed: A1: 260°/s A2: 240°/s A3: 260°/s A4: 430°/s A5: 450°/s A6: 720°/s  , please also have a look at the PDF document of this robot Approx. Onsite Dimension. (l x w x h): 2,000 x 1,500 x 1,800 mm, weight approx.: 250 kg
used
Description: serial no.: P014TL095 operating voltage: 400 V frequency: 50 Hz , nominal current: 17 A jib length: 380 mm , distance between table and spindle nose: min. 150 mm , distance between table and spindle nose: max. 480 mm , with ,3 slots slot width: 14H14 mm , Table height over floor: 815 mm , working spindle: , spindle bearing: 50 mm diameter , tool clamping: 2200 N , Max. tool diameter: 80 mm , Max. tool length: 250 mm , Max. feed force: , X: 2700 N , Y: 2700 N , Z: 5400 N , chiping values: , Max. milling performance: 600 cm³ Max. drill diameter: 20 mm , Max. thread diameter: M 16 , attention: without machine vices on clamping surface and without SK 30 tool holders on tool turret z-motion: 330 mm, max. workpiece weight between centers: 250 kg, x-motion: 500 mm, y-motion: 400 mm ...