fan separator used for sale

Power: 2.2 kW Turbine diameter: 390 mm Air flow: 1.4 m³/s Static pressure: 4200 Pa Weight: 90 kg Type: High-pressure centrifugal fan. Dimensions (mm): 680 x 680 x 50 Applications: Industrial vacuum, furnace ventilation, dust/gas/fume extraction, HVAC systems Auction-ID: A1-50002-12

Power: 2.2 kW Turbine diameter: 390 mm Air flow: 1.4 m³/s Static pressure: 4200 Pa Weight: 90 kg Type: High-pressure centrifugal fan. Dimensions (mm): 680 x 680 x 50 Applications: Industrial vacuum, furnace ventilation, dust/gas/fume extraction, HVAC systems Auction-ID: A1-50002-9

Power: 2.2 kW Turbine diameter: 390 mm Air flow: 1.4 m³/s Static pressure: 4200 Pa Weight: 90 kg Type: High-pressure centrifugal fan. Dimensions (mm): 680 x 680 x 50 Applications: Industrial vacuum, furnace ventilation, dust/gas/fume extraction, HVAC systems Auction-ID: A1-50002-13

Power: 2.2 kW Turbine diameter: 390 mm Air flow: 1.4 m³/s Static pressure: 4200 Pa Weight: 90 kg Type: High-pressure centrifugal fan. Dimensions (mm): 680 x 680 x 50 Applications: Industrial vacuum, furnace ventilation, dust/gas/fume extraction, HVAC systems Auction-ID: A1-50002-5

Power: 2.2 kW Turbine diameter: 390 mm Air flow: 1.4 m³/s Static pressure: 4200 Pa Weight: 90 kg Type: High-pressure centrifugal fan. Dimensions (mm): 680 x 680 x 50 Applications: Industrial vacuum, furnace ventilation, dust/gas/fume extraction, HVAC systems Auction-ID: A1-50002-8

Power: 2.2 kW Turbine diameter: 390 mm Air flow: 1.4 m³/s Static pressure: 4200 Pa Weight: 90 kg Type: High-pressure centrifugal fan. Dimensions (mm): 680 x 680 x 50 Applications: Industrial vacuum, furnace ventilation, dust/gas/fume extraction, HVAC systems Auction-ID: A1-50002-1

Power: 2.2 kW Turbine diameter: 390 mm Air flow: 1.4 m³/s Static pressure: 4200 Pa Weight: 90 kg Type: High-pressure centrifugal fan. Dimensions (mm): 680 x 680 x 50 Applications: Industrial vacuum, furnace ventilation, dust/gas/fume extraction, HVAC systems Auction-ID: A1-50002-6

Power: 2.2 kW Turbine diameter: 390 mm Air flow: 1.4 m³/s Static pressure: 4200 Pa Weight: 90 kg Type: High-pressure centrifugal fan. Dimensions (mm): 680 x 680 x 50 Applications: Industrial vacuum, furnace ventilation, dust/gas/fume extraction, HVAC systems Auction-ID: A1-50002-4

Power: 2.2 kW Turbine diameter: 390 mm Air flow: 1.4 m³/s Static pressure: 4200 Pa Weight: 90 kg Type: High-pressure centrifugal fan. Dimensions (mm): 680 x 680 x 50 Applications: Industrial vacuum, furnace ventilation, dust/gas/fume extraction, HVAC systems Auction-ID: A1-50002-7

Power: 2.2 kW Turbine diameter: 390 mm Air flow: 1.4 m³/s Static pressure: 4200 Pa Weight: 90 kg Type: High-pressure centrifugal fan. Dimensions (mm): 680 x 680 x 50 Applications: Industrial vacuum, furnace ventilation, dust/gas/fume extraction, HVAC systems Auction-ID: A1-50002-11

Power: 2.2 kW Turbine diameter: 390 mm Air flow: 1.4 m³/s Static pressure: 4200 Pa Weight: 90 kg Type: High-pressure centrifugal fan. Dimensions (mm): 680 x 680 x 50 Applications: Industrial vacuum, furnace ventilation, dust/gas/fume extraction, HVAC systems Auction-ID: A1-50002-10

Power: 2.2 kW Turbine diameter: 390 mm Air flow: 1.4 m³/s Static pressure: 4200 Pa Weight: 90 kg Type: High-pressure centrifugal fan. Dimensions (mm): 680 x 680 x 50 Applications: Industrial vacuum, furnace ventilation, dust/gas/fume extraction, HVAC systems Auction-ID: A1-50002-3

Power: 746W Auction-ID: A1-49793-667

- Mez electric motor, power 11kW. - Dimensions: approximately 77x170xH123cm. - to be disassembled by the buyer, door opening approximately 79xH200cm. Auction-ID: A1-49374-58

- 4kW.try - to be disassembled by the buyer. Without tubes. Auction-ID: A1-49374-57

Fang HRZ 2.6 Recording: MS03 Excavator class 2-6 ton Made of high-quality, low-wear steel painted in dark grey Material: S355J2+N steel, cutting edge and sides with low-wear steel Replaceable tooth tip Weight: 62 kg Auction-ID: A1-50077-855

Holtrop Jansma EHD250 Manufacturer: Holtrop Jansma Type: EHD 250 M-Nr.: W 0055208B Year: 2013 Specifications: Motor: 11 KW, 3.000 rpm – direct driven fan Suction diameter: ø250 mm Out: ø250 mm Position: Fanhouse can be turned switched over Inclusief: Star-delta switch and mainswitch cabinet

Reinders RVR 500-800: Reinders RVR 500-801 Manufacturer: Reinders Type: RVR 500-800 M-Nr.: 02005 Year: 2002 Specifications: Motor: 15 KW, 3.000 rpm – indirect driven fan Suction diameter: ø500 mm Out: ø350 mm Capacity: 8,700 m3/hour Pressure: 2.800kPa

Schuko ø200 5KW Booster Manufacturer: Schuko Type: Booster ventilator M-Nr.: NN Year: 2006 Specifications: Motor: 4 KW, 1.450 rpm – direct driven fan Suction diameter: ø200 mm Out: ø200 mm Capacity: 3.400 m3/hour Pressure: 2.800kPa

Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW TEKA-Dosiereinrichtung für Precoat, Filterpatronen gegen Verkleben schützen /  TEKA Precoat Dosing Unit: Protecting Filter Cartridges Against Clogging Baujahr / Year 2018 - Serial-No. 9501442110402 Filtersteuerung mit automatische Filterabreinigung / Filter Control with Automatic Filter Cleaning Motorleistung 11 kW / Motor power 11 kW Leistungsstarker Ventilator mit Steuerung / High-Performance Fan with Controls Ausführung SelfClean / SelfClean Version Ausstattung / Equipment: Standard Filterpatronen, Filterfläche je nach Luftleistung / 4 standard filter cartridges; filter area varies depending on airflow capacity Display gesteuerte Fil ...

Absaugarm aus Metallrohr und wird für das Punktschweißen, Laboranwendungen und die Nebelabsaugung Ventilatoren der FUA Serie können als Direktmontagelüfter für Absaugarme Suction Arm is ideal for grinding, polishing and other types of high-dusting Operations Absaugung - Ventilator / Suction - Fan Plymovent MMH-100-15 - FUA-1300 Baujahr / Year 2007 - Serial-No. 7402 Einsatzmöglichkeiten: Punktschweißen / Spot welding Schleifen und Polieren / Grinding and polishing Laboranwendungen / Laboratory Applikation Nebelabsaugung / Mist collection

Centrifugal fan technical data see pictures Auction-ID: A7-50084-123

The products have not been tested for functionality. Therefore, there is a possibility that individual items may not work. The products may have scratches, dents, incomplete, or general signs of use. Visit us on the day of the inspection to get an accurate picture of the condition and reason for return. Shipping is also possible. If you would like shipping, please send an email to: info@qplaza.de. For more information, please contact us. Auction-ID: A1-50209-1187

The products have not been tested for functionality. Therefore, there is a possibility that individual items may not work. The products may have scratches, dents, incomplete, or general signs of use. Visit us on the day of the inspection to get an accurate picture of the condition and reason for return. Shipping is also possible. If you would like shipping, please send an email to: info@qplaza.de. For more information, please contact us. Auction-ID: A1-50209-1186

Workpiece weight: maximum. 500 kg Typical applications: precision tools and stamping tools, mold making, carbide machining, hardened steel cutting, very precise contours with tight tolerances with automatic wire threading, 5 axes (X, Y, U, V, Z )taper cuts (bevel cuts) up to 30° and underwater machining Control: Fanuc 180 is-WB Auction-ID: A7-50222-14

Manufacturer: EVG Lufttechnik GmbH Type: RVS5-RU-71-R-RD90-V Year of Make: 2022 The fan was purchased for an originally planned project, but was not put into operation and is therefore unused. The associated technical documentation is completely available. The essential technical data: • Volume flow: 245 m³/h • Maximum speed: 5,270 rpm • Maximum media temperature: 500 °C • Total pressure difference: up to 6,172 Pa • Weight: approx. 165 kg • Motovario electric motor • Motor power: 1.5 kW • Voltage: 230/400 V • Efficiency class: IE3 • Degree of protection: IP55 • V-belt drive

Defects: Housing slightly damaged Power: 750W Auction-ID: A1-50225-59

Alfa Laval Oil Seperator MAB 205

centrimax.de Centrimax - Winkelhorst Trenntechnik GmbH has specialized in the supply of used SEPARATors from GEA Westfalia Separator and Alfa Laval for more than 30 years. The separators are overhauled by us and delivered with warranty. Our large stock of several hundred separators includes plate separators (self-cleaning separators, full-coat plate separators and nozzle separators) as well as chamber separators, for the clarification and separation of suspensions and liquid mixtures. Ask us if you are looking for advice on solving problems in the field of centrifugal separation technology. Buy from the specialist !

Cat. no. 08-1535F in very good condition self-supporting complete with tools, electrical control for beer,wine,fruit juice Gearbox horizontal Drum speed: 4800 rpm Swallowing capacity: 20,000 Ltr/h Dimensions and weight: Height: 190 cm Length: 170 cm Width/depth: 140 cm Weight approx. 2 ton For further information call: 09353 90905-0 or fax: 09353 90905-22 Mobile: 0171 651 82 48 All prices are ex works plus VAT, from stock. Intermediate sale reserved. Sightseeing is also possible in the evening or on weekends by appointment.

Cut fat capacity 200 L

FOR SALE 4 UNITS ALFA LAVAL S 826 separator YOB 2005 V 380 Hz 50 TO WHOM IT MAY CONCERN; WE VE COMPLETE 4 SETS ALFA LAVAL S 826 SEPARATOR AT OUR STOCK . WE VE ALSO CONTROL PANEL ELECTRIC BOXES ETC... SEPARATOR BOWLS HAS NO ANY DEMAGES. SEPARATORS ARE IN GOOD WORKING CONDATION. SEPARATOR USED AS OIL SAPARATORS AT PAST TENSE. PLS FIND SPECIFICATION ON BELOW. SEPARATORS ARE READY TO TRANSPORT . MAKER ALFA LAVAL TYPE S826 SERIAL OF NO. S 4135619 / 4135620 / 4135621 / 4135622 YEAR OF BUILT 2005 PRODUCT NO. 881201-06-01 VOLT 380V FREQUIENCY 50 Hz MAX SPEED BOWL 12129 r/min MOTOR POWER 5.5kW MADE IN SPAIN IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services  ...

Producer: Nowicki Type: Hercules SNV-180 Power: 11 kW Weight: 2170 kg Capacity: up to 400 kg / h Power supply: 400 V / 50 Hz - Separator for bones NOWICKI type Hercules SNV-180 - Designed for all kinds of beef and pig bones - Chamber Volume 7.7 litres - Average cycle time of 30 seconds - Press time (adjustable) from 1 to 10 seconds - Maximum pressing force 105 t - Cylinder inside 0.7 mm / cylinder outside 5 mm - High performance and efficiency (25-80% profit) Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are choiceable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Dimensions: L 1410 mm x W 900 mm x H 1310 mm.

Machine type: friction washer / friction separator Manufacturer: NEUE HERBOLD GMBH Year of manufacture: NEW rotor diameter: 560 mm working length: 3000 mm Drive: 30 kW for integration in recycling processing plants - to wash plastic materials such as film flakes, foil chips, granules, PET bottle-flakes,...

Centrimax provides used and reconditioned separators for the beverage industry: Beer separators Dairy separators Separators for the juice industry Separators for coffee, tea, and soy

FOR SALE ... WESTFALIA GEA BILGE MASTER 3000 USED COMPLETE SYSTEM AT TURKEY. TO WHOM IT MAY CONCERN WE VE WESTFALIA GEA BILGE MASTER 3000 USED COMPLETE SYSTEM AT OUR STOCK . PLS FIND DETAILS ON BELOW TYPE BILGE MASTER 3000 SERIAL NO 9018-317 2007 YOB CERTICATE NO 330/241 WHEEL MARKET NO 0736 Separator TYPE WSD18-01-037 SER NO 9018-317 2007 YOB SYSTEM HAS COMPLETE OIL MONITOR PANEL / BILGE ALARM / CONDENCER ETC ETC BILGE MASTER 3000 READY TO TRANSPORT AT IZMIR TURKEY. IF YOU HAVE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US.. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after a NO-ne ate separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approx. 1 mm grain size. Meaningful use for metal contents up to 60% metal content. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, can be inspected and tested. On request also with camera! If the machine is too small, we build it larger. This is our demo machine. Maximum throughput depends on the material and purpose. Price matter of negotiation!

- P-500-50 - P-320-50M

The oil separator is used to collect oil floating on the surface. It is used wherever there is little working space and fluids must be moved and de-oiled in different places. It is a lightweight, compact portable device that is mounted on the wall of the in which the liquid to be cleaned is located. Thanks to this, it is possible to develop various technological active ingredients in de-oiled in different places. The device is designed for continuous operation. The disc is made of self-adhesive plastic, on which oil and carbohydrates, but water does not. Maximum liquid temperature up to 60 ° C - standard band. Maximum motor and housing temperature up to 40°C. Avoid mounting places with aggressive pH - additional motor protection required. With the OTV-300, you should take a 15-minute break every 3 hours. If the motor does not overheat, it can work longer. Continuous opera ...

System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: UCF 646-00-35 Power: 110 kW Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzung of the root solution to power consump ...

FOR SALE ALFA LAVAL MMB 305S-11 TO WHOM IT MAY CONCERN; WE VE USED ALFA LAVAL MMB 305S-11 SEPARATOR AT OUR STOCK IT IS IN GOOD RUNNING CONDAT?ON . IT WHAS USED AS GAS OIL SEPARATOR PLS FIND SPECIFICATION BELOW. MODEL MMB 305S-11 YOB & SERIAL No. 2008 / 4170832 BOWL NO. 548715-01 CURRENCY 60 Hz MADE IN SWEEDEN READY TO TRANSPORT. IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

More information will follow.

FOR SALE HFO SEPARATOR ALFA LAVAL S 825 TO WHOM IT MAY CONCERN; WE VE USED HFO SEPARATOR ALFA LAVAL S 825 AT OUR STOCK. IT IS IN GOOD RUNNING CONDATION.. PLS FIND SPECIFACATION ON AT BELOW. TYPE S825 YEAR / SERIAL NO. 2004 / 4130905 BOWL NO. 560626-04 CURRENCY 60 Hz SEPARATOR READY TO TRANSPORT. IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Best of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

more information to follow

-System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: CF 7000 / UCF 646-00-35 Power: 110 kW Year of construction: 2012 Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzun ...

4 used LTG KENYA dust and fiber separators and compactors, year 1995, each composed composed of: centrifugal fan (radial blades) dust suction ventilator, motor with 11 kW power, blade diameter 800 mm cyclone centrifugal dust separator (Vortex) type ZSC 200, for air volume up to 2000 m3/h LTG compacting power screw (CPS), screw diameter 110 mm, motor with 0,75 kW power dust quantity up to 100 Kg/h

Permanent Overbelt Magnetic Separator TYPE DMPM800 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite mag ...