fan separator used for sale

Transducers, power transducers, active power transducers, analog-to-analog converters, frequency-to-analog converters, frequency dividers, isolation converters, signal converters -Manufacturer: Weidmüller, Signal converter 8795890000 -Type: WAS5 PRO Bridge -Price: per piece -Quantity: 9 pieces -Dimensions: 95/15/H110 mm -Weight: 0.1 kg/piece

Filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, suspended matter filter -Manufacturer: WW, oil mist separator filter system type ME-FI 600 -Voltage: 230V / 0.15 kW -Filter: without filter -Quantity: 1 piece available -Dimensions: 710/390/H445 mm -Weight: 38 kg

Limit signal generator, logic controller, trip point control, multisafe switching amplifier, level monitor, signal isolator, isolation amplifier, isolation amplifier -Manufacturer: Turck, multi safe signal isolator isolation amplifier -Type: MS91-12-R -Quantity: 1x module available -Dimension: 115/50/H75 mm -Weight: 0.4 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, liquid collector, refrigeration unit, liquid separator -Manufacturer: ESK Schultze, liquid separator for cooling units -Type: FA 16 -Permissible operating pressure: 25 bar -Dimensions: Ø 132 x 275 mm -Weight: 1.7 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, liquid collector, refrigeration unit, liquid separator, filter dryer housing, filter dryer, filter drier, liquid filter dryer -Manufacturer: Danfoss, liquid collector with filter dryer -Filter dryer: Type: DX 033 -Permissible operating pressure: 28 bar -Individual components: see photos -Dimensions: 190/180/H360 mm -Weight: 6.1 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, liquid collector, refrigeration unit, liquid separator, filter dryer housing, filter dryer, filter drier, liquid filter dryer -Manufacturer: Danfoss, liquid collector with filter dryer 2 pieces / double version -Filter dryer: Type: DX 083 -Permissible operating pressure: 28 bar -Individual components: see photos -Price/tax: complete -Dimensions: 350/350/H360 mm -Total weight: 13.8 kg

DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Kaeser, Air Oil Separator Filter Type 6 1963 0 -Inside/outside: Ø 124/170 mm -Bolt circle: Ø 210 mm -Number: 3x air filters available -Price: per piece -Dimensions: Ø 250 x 245 mm -Weight: 2.3 kg/piece

DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mann Filter, Air Oil Separator Filter Type 49 002 52 101 -Inside/outside: Ø 124/169 mm -Number: 5x air filters available -Price: per piece -Dimensions: Ø 190 x 315 mm -Weight: 2.6 kg/piece

DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Ecoair, Air Oil Separator Filter Type N 2785000 / 49 302 52 171 -Inside/outside: Ø 110/170 mm -Bolt circle: Ø 210 mm -Quantity: 1x air filter available -Dimensions: Ø 245 x 420 mm -Weight: 3.4 kg.

DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mahle Air Oil Separator Filter Type 852 631 -Inside/outside: Ø 120/170 mm -Quantity: 1x air filter available -Dimensions: Ø 200 x 610 mm -Weight: 4.2 kg

Separator screen, slotted screen basket, slotted screen baskets, replacement basket, replacement baskets, separator basket, separator slotted screen, separator filter grid, separator grid, separator screen for slurry separator, round screen, slotted screen -Slotted screen: separator screen -Gap dimensions: mm -Inside: Ø 129 mm -Dimensions: Ø 136 x 800 mm -Weight: 3.8 kg

Material separator, material selector, filter system, material separator, metering rotary valve, rotary valve, metering valve, rotary valve, conveying technology -Manufacturer: Höcker Polytechnik, material separators for paper, cardboard, corrugated board ... -Type:PMA-U -Drive: 0.75 kW -Inlet: 590 x 610 mm -Injection air volume: max. 12000 m³/h -Technical data: see photo of the nameplate -Transport dimensions: 2020/1340/H2000 mm -Weight: 878 kg

Alfa Laval BRPX 413 XGD-14 tools Used hydraulic capacity 18,000 l/h motor 30kW Centrifuge for food purposes / fat Very good condition

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (18,5 kW), water valves (original Westfalia), all inlet/outlet pipes, service tools for maintenance and a several spare parts., Additional features:, Excluding:, - Base plate and feet., - Motor cover., - Control panel., Type of Machine: Cream Separator / Skimmer, Capacity: 10.000 liter per hour, Bowl speed: 5.920 rpm, Motor: 18,5 kW - 230/460 V - 60 Hz - 1.770 rpm - 59 / 29,5 A , Dimensions: 190 x 105 x 190 cm, Weight: 1.800 kg

The Siebtechniek CONTURBEX is a continuously operating filtration centrifuge and it achieves his flexibility by means of a centrifuge scroll driven at a differential speed. The unique functional principle of pre-accelerated suspension feed to the screening device, combined with homogeneous distribution by means of the worm, enables this centrifuge to perform complex tasks. We achieve optimum dewatering results by adapting the machine parameters, G force and dwell time. The solid material is conveyed by means of a worm rotating at a different speed from the bowl. Solid and liquid are conducted away into separate housing sections. Mother liquor and washing liquid can be drained away separately from each other. The drive for the SIEBTECHNIK screen worm centrifuge stands out for its powerful gear units and a high-quality bearing support. A central oil-circuit lubrication system supplies all  ...

Sepamatic separator, type: SEPA 410, machine number: 108870/1, year of construction: 12.2020, 400 V, 50 Hz, 4.9 A, 2.2 kW, plastic belt, belt width: 205 mm, perforations: 1 mm, total dimensions: 1100 mm x 850 mm x 1630 mm.

Used separator/muscle demusing machine from Meat Master type M18 / P-100-S. Year of manufacture 1999. Manufacturer's documentation. CE

Used Flow Pasteurizer with separator 2000 L/h Structure and Operating Principle The Used Flow Pasteurizer with separator 2000 L/h operates as a continuous flow pasteurizer with a plate heat exchanger, designed specifically for the thermal processing of milk and cream. The system uses a plate heat exchanger to ensure efficient heat transfer, enabling rapid product heating and cooling. As a result, it maintains product quality while maximizing energy efficiency. Moreover, the continuous operation delivers a consistent throughput of 2,000 liters per hour. Therefore, this model suits medium-scale facilities that demand precise thermal treatment and high microbiological safety standards. Construction Features and Manufacturer Jedinstvo, a Croatian manufacturer, built the Used Flow Pasteurizer with separator 2000 L/h in 1998 under model number 43.107072. At present, the machine remains dismant ...

Voltage 220V; max current 4 A; Vibration: 6000/min; Adjustment by potentiometer Serial: CM010585 Estimated weight: 50 kg Approximate dimensions: 500x500x1450 mm Auction-ID: A7-44996-45

Incl. 54x mounting rails, without pallet truck Auction-ID: A7-45702-31

Type: RHS 1 U 200 GR 360, Y&cams: 1995, engine: Loher, 4,500 rpm / 5.5kW, on base frame, with suction and pressure bellows and 7 vibration dampers.

Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in  ...

complete system from 4Jet to the edge deletion of thin film Solarzellengehoert originally, to the 2 sputtering equipment offered by us by Lakkoju H3200Randentschichtung • non-contact procedure without damage to the substrate, no micro-cracks • dry process with no grit, no chemicals, wenigerEntsorgungsvolumen, eco-friendly • effective decoating of TCO, semiconductors undRueckkontakten - 1000V-Test > 10 GOhm • no additional cleaning necessary • reproducible results • optional laser cleaning of the cut edges! • discharge layering zones can be flexible - Glastoleranzangepasst • all metal front or rear contacts (MO , Al, AG) • all major semiconductor (a-Si single junction/tandem junction, CIS, CIGS, CdTe) • all TCO layers (ITO, ZnO, SnO2) MEX molybdenum  ...

We have 2 pieces control cabinet fans from Rübsamen & Mr Type: LS0, 20W, 0.14 A and 230V the dimensions are 240 x 240mm, one fan is unused = 12,-€ and one was briefly in use = 10,-€

Portable fan / exhaust fans Stratos Ventilatoren GmbH Fan with ABB electric motor 0,75 KW, 400V, 50 Hz, 1,9A, 2850U/min Used

Suction blowers 11 kW approx. 1200 mm direct drive

Fans 500 to 28,000 m3/h Sales prices: € 100,- per 1000 m3/h so a fan with 5000 m3/h costs € 500,- plus VAT. We have fans for painting booths, suction walls, drying booths, paint storage rooms and other applications in stock. Please ask us. For painting systems we have complete units, luminaires, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.

ABEGG Ventilatore ZIEHL. noch nie benutzt NEW 4 PCs.

High performance blower fan dust blower Built in 1967 Type 1000 275 R MD 63 m³ / s 1000 u/min 71.3 kw Manufacturer Heinrich Lühr dust technology

technical details: - Position: GR 360 (pos. 5) - Diameter suction nozzle: 250 mm - Diameter pressure nodle: 250 mm - Steel impeller: curved - Air volume flow (V nominal): 5,400 m³/h - New engine Engine data: - Motor manufacturer: SEVA Tec - Motor power: 7.5 kW - Voltage: 400 V - Current: 13.7 A - Frequency: 50 Hz - Speed: 2,920 rpm Dimensions (H x W x D): 1,130 x 850 x 690 mm Transport dimensions (H x W x D): 1,300 x 800 x 1,200 mm (on EURO pallet) Weight: 250 kg Consoles and vibration dampers can be requested and supplied on request. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

technical details: - Position: GL 360 (pos. 1) - Speed: 1,450 rpm = slow speed - Volume flow: 6,500 m³/h - Size: 355/4 - Power: 11 kW - Pg: 230 for air at +20°C and density = 1.2 kg/m³ - Voltage: 380/600 V (triangle/star) - Current: 22.5/13 A - Frequency: 50 Hz - Weight: 323 kg Metrics: - Housing (H x W x D): 1,475 x 800 x 1,260 mm (incl. motor) - Diameter suction nozzle (suction side): 380 mm - Diameter pressure connection (pressure side): 320 mm Transport dimensions (H x W x D): 1,630 x 800 x 1,200 mm (on EURO pallet) The fan was completely refurbished and painted in our house. Among other things, the motor shaft bearings were renewed. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

technical details: - Position: GR 360 (Pos.5) - Diameter suction nozzle: 300 mm - Diameter pressure nozzle: 280 mm - Volume flow: max. 4,600 m³/h - Pg : 275 for air at 20°C and ρ =1,2 kg/m³ - Steel impeller straight + + + New engine + + + electrical connection: - Motor manufacturer: SEVA Tec - Motor power: 7.5 kW - Voltage: 400 V - Current: 14.3 A - Frequency: 50 Hz - Speed: 1,450 rpm - Dimensions (H x W x D): approx. 1,580 x 1,380 x 760 mm - Transport dimensions (H x W x D): 1,800 x 1,400 x 800 mm (on EURO pallet) - Weight: 400 kg The fan has been cleaned and checked for correct functioning. The engine was renewed and the impeller balanced. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Fan Polytechnik L 300 Masch. No. 82261 Speed 1400 RPM Performance 7200 m3 / h Motor 380, 50 V, 7.5 kW Pressing 215 mm / WS Connection ø 300 mm H x W x d: 1080 x 950 / 1350 x 950 cm Weight 170 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

specifications: -Fan for chip extraction - Type GL90 - Diameter intake manifold: 250 mm - Diameter exhaust nozzle: 250 mm - Dimensions decoupling on the blow-out side: length 230 mm, diameter 250 mm - Dimensions housing without decoupling (L x W x H): 850 x 600 x 740 mm - Dimensions housing with decoupling (L x W x H): 1080 x 600 x 740 mm - Motor turning left - Volume flow: 4,590 m³/h at 1,750 Pa Engine data: - Voltage: 400 V - Rated current: 8.6 A - Power: 4.0 kW - Revolution: 2,880 rpm - Starting current: 50 A (only in star-delta circuit) ! Transport dimensions (L x W x H): 1,200 x 800 x 910 mm (on pallet!), 1 packaging unit Weight: 110 kg The fan is completely cleaned and has been tested for its function. (Changes and errors regarding technical data and prices excepted!)

Fan Polytechnik L 200 Connection of 200 mm H x W x D: 650/1150 x 960 x 700 mm Built in 1982 Weight approx. 150 kg Masch. No. 82261 Speed 1400 rpm Leistutng 3410 m3 / h Engine 4 kW Pressing 238 mm / WS The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

technical details: • Position: GL 360 (pos. 1) • Diameter suction nozzle: 200 mm • Diameter pressure connection: 200 mm • Volume flow: 3,380 m³/h • Pressure increase: max. 2,000 Pa • Steel impeller: straight • Dimensions (H x W x D): 1,080 x 560 x 700 mm (incl. motor and nozzles) electrical connection: • Engine manufacturer: VEM • Motor power: 3.0 kW • Voltage: 380 V • Current: 6.15 A • Frequency: 50 Hz • Revolution: 2,840 rpm Transport dimensions (H x W x D): 1,230 x 1,200 x 800 mm (on EURO pallet) The fan has been mechanically and electrically tested and has been repainted. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

technical details: • Position: GR 360 (pos. 5) • Diameter suction nozzle: 200 mm • Diameter pressure connection: 200 mm • Volume flow: 3,820 m³/h • Steel impeller: straight • Dimensions (H x W x D): 1,080 x 590 x 700 mm (incl. motor and nozzles) electrical connection: • Engine manufacturer: VEM • Motor power: 4.0 kW • Voltage: 380 V • Current: 8.4 A • Frequency: 50 Hz • Revolution: 2,885 rpm Transport dimensions (H x W x D): 1,230 x 1,200 x 800 mm (on EURO pallet) The fan has been mechanically and electrically tested and has been repainted. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

RADAX high-pressure duct fan High-pressure duct fan with cylindrical pipe sleeve, flanges on both sides, directly driven. Cylindrical galvanized steel tube Sheet metal, with double-sided moulded Flange, hole pattern according to DIN 24155, recessed built guide wheel. Semi-axial impeller, eight spatially connected curved blades made of thermoplastic, Balancing quality G 6.3 according to VDI 2060 and DIN ISO 1940. Three-phase squirrel-cage motor by Voltage reduction speed controllable, Thermal contacts, closed design, maintenance-free, sealed, low-noise Ball bearings with long-term lubrication. Fan data (default) Seawater version. Also resistant to weak acids and alkalis. NEW!

MIAG Ventilator/Fan HRBW S09-1000 130 m³ / min 1000 mm water column 50 kw Intake of 300 mm x 400 mm With continuous shaft, front and rear bearings Inlet from top, outlet diameter 360 mm The unit has been cleaned. We have many different fans from 28 kw to 90 kw output. We are looking forward to your inquiry!

A used fan is sold: Rippert RV80 - 800-765-B5 Year 2007 (2017 overhauled) 27000m ³/h Booster 1262PA

Extractor fan 4 Fagida MD Year of manufacture 2002 L x W x H: 80 x 60 x 80 cm Weight approx. 120 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Güntner GVH 102B/2x2N air-cooled condenser Patented Güntner support tube design All fans in ISO F version Performance data in R404A Condensing Block: The refrigerant-carrying core tubes are relieved by the patented support tube construction. This results in increased protection against leakage. Copper tube ∅ 12 mm, 50 x 25 mm offset Aluminium slats, spacing 2.4 mm Distribution and manifold pipes as well as pipe connections in copper Permissible pressure: ps=28 bar Permissible temperature: ts=100°C Ventilators: Low-noise axial fans with maintenance-free motors with protection class IP54, three-phase 400/3/50, according to DIN 40050 Execution: Insulating material class F Permissible conveying temperature -30 to +55°C All three-phase fans are generally equipped with 2 speeds (∆-Y switching) as well as speed-adjustable by means of Güntner control devices  ...

Main engine KW: 90

Exhaust fan Tube ø 350 mm Fan ø ± 750 mm Engine 11 kW Built in 1995 Weight approx. 190 kg L x W x H: 100 x 80 x 100 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

DV EC 250 Pro Roof fan with EC motor and pressure control Roof fan with EC technology. Aerodynamically designed housing made of high-quality polypropylene in grey, diagonally blowing. Operating range from -30 to +80 °C. Integrated guide vanes for optimum efficiency. For horizontal mounting. Diagonal impeller made of aluminium, motor-impeller unit dynamically balanced. Electronically commutated DC outrunner motor with ball bearing for continuous operation. High efficiency even in regular operation. Maintenance-free and radio interference-free. Stepless speed control with the speed potentiometer P.. 10 (Accessories). In conjunction with the universal control system EUR EC (accessory), the fan can be used to control differential pressure, differential temperature or flow velocity. Dimensions: L=57cm / W=57cm / H=55cm Original price Fr. 2600.- 2 pcs. available

Item number 90031-0068 Power Supply for Tetra Pak machines e.g. TBA 8, TBA 19, A 3 flex, TCBP 70 GE FANUC Series 90-30 High Capacity Power Supply Programable

Suction fan Pipe of 300 mm Engine 4 kW The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Dear Ladies and Gentlemen, We hereby offer the following original and newly packaged AXIMAX Blue Fan. aximax axial fan NW500 Type: AXK 500-6BD2-20°-3 with attached three-phase motor IE3 3 kW; 3000 min-1; 400V 50Hz with PTC for FU operation with protective grille between impeller + motor New and unused! Hours: 0 Details can be found in the pictures and PDF in the advertisement. Prior sale/errors/changes at any time reserved, EXW Beesten Price VHB! If you have any questions, please feel free to contact Sascha Neuwirth at any time Service for all aspects of the gas engine EPS BHKW GmbH Speller Straße 12 49832 Beesten Phone: +49 5905 945 82-0 Fax: +49 5905 945 82-11 Mail: info@eps-bhkw.de

TECHNICAL DATA: Main motor power KW: 90

Centrifugal fan / blower / fan Hürner-Funken made of chemical-resistant plastic The housing and impeller of the fan are made of chemical-resistant plastic and suitable for aggressive media in the process exhaust air. Manufacturer Hürner-Funken GmbH 35325 Mücke-Atzenhain Type 16-RU 315 MN/0/1420 Factory No. 2-29191/00 Built in 1999 Air capacity / volume flow 2166 / 1900 m³/h Motor power 1.50 KW, 1619/1420 rpm. Pressure difference 1287/990 Pa Conrad Meisenheim electric motor Type DR 90 L-4 No. 304987 1.5 KW, 400/230 V star/delta, 3.4/6 A, 50 Hz Iso F, IP55 1420 rpm, cos phi 0.82 Chemically resistant, corrosion resistant. The centrifugal fans made of plastic are specially designed for pumping chemically aggressive exhaust air. They are characterized by the highest corrosion resistance. In addition, they achieve high volume flows and Pressure differences wit ...