faceplate used for sale

turning diameter over bed: 290 mm turning diameter over slide rest: 170 mm turning length: 750 mm turning speeds: 75 - 2000 U/min centre height: 145 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK tailstock quill stroke: 80 mm connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,34 t dimensions of the machine ca.: 1,3 x 0,75 x 0,7 m 2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 280 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 70 - 2000 U/min centre height: 195 mm spindle bore: 54 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0.85 t dimensions of the machine ca.: 1,95 x 1,0 x 1,75 m Professional industrial machine 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core boring: 70-560 mm bore depth: 20000 mm drilling diameter: 70-500 mm core boring capacity in St 60 - reboring: special: 560-1000 mm workpiece diameter: 3200 mm workpiece weight: 200 t faceplate diameter: 2900 mm speed of boring spindle:: 100 - 500 U/min feed range: 3 - 2000 mm/min boring spindle drive: 55 kW spindle head drive: 150 kW workpiece turning speeds: 230 U/min control: Fanuc total power requirement: - kW weight of the machine ca.: - t 2010 Retrofitted equipped with: - Fanuc Control - 4-Jaw Chuck - Oil Pressure Head - Boring Head - Drill Head - 2-Point Rollers Steady Rest (4) - 3 Point Steady Rest (2) - Bar Rest (2) - Coolant & Coolant Piping - Chip Conveyor - Honing Oil Tank & Honing Tool Bars The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 350 mm turning diameter over slide rest: 200 mm turning length: 800 mm spindle bore: 46 mm spindle turning speed range: 18: 25 - 2000 U/min spindle head: Din 55027 Gr. 5 total power requirement: 4,4/2,2 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 2 x 1 x 1,8 m Video available on our website.: Condition: ready for operation: Electric 380 Volt: 3 jaw chuck: neu 160 mm Multifix-toolholder with tapers: Rear chip protect: Faceplate: Röhm 310 mm Motor brake: Universal lathe from the training area with new 3-jaw chuck, face plate and multifix holder. It was not heavily used, which can be seen from the little paint wear on the back wall. We ask interested private parties to refrain from making an inquiry, as it is a well-preserved professional machine and is therefore too expensive (+ VAT!) for hobby mechanics. Machine dealer with own sto ...

Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm -Weight: kg

Three-jaw chuck key, three-jaw lathe chuck, faceplate chuck key, chuck key -Hexagon: SW 24 mm -Sleeve: Ø 45 mm -Dimensions: 870/45/H610 mm -Weight: 6.4 kg

Face plate bending machine, face plate bending machine, profile bending machine, bending machine, angle bending machine, tube bending machine -Diameter faceplate: 1330 mm -Clamped round blank diameter: 775 mm -for a surcharge: other round blanks can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 1200/700/H1210 mm -Weight: 320 kg

Spindle for plate boring mill, table boring mill, boring mill, milling machine, quill, boring head, Replacement spindle -SK50 holder for: screwing onto the faceplate -Adjustment: SK50 -Dimensions: 220/220/H160 mm -Weight: 20 kg

faceplate diameter: 5000 mm swing diameter: 6300 mm turning height: 4030 mm Control: Siemnens type: 840 D power line Shop Turn live tooling: turning speeds: 25-630 U/min Tool changer: 8 Pos. Max ram stroke: 2000 mm ram head dimension: 300x300 mm cross rail - adjustment: 3200 mm turning speeds: 0,4-50 U/min transmission ratio: 2 chip conveyor: coolant: total power requirement: kW weight of the machine ca.: 129 t dimensions of the machine ca.: 14,5x13 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 285 mm turning length: 1500 mm max. workpiece weight between centres: 500 kg spindle bore: 62 mm spindle turning speed range: (24) 11,2 - 2240 U/min feeds - longitudinal: 0,063 - 56 mm/U feeds - cross: 0,0315 - 28 mm/U bed width: 360 mm tailstock quill diameter: 80 mm tailstock quill adjustment: 190 mm tailstock quill taper MT: 5 power capacity: 11 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: 4,0 x 1,5 x 1,4 m 2-axes D.R.O. 3-jaw-chuck FORKARDT F250 Faceplate Rapid traverse Multifix toolholder 2 x steady-rest Coolant equipment Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The 1550 vertical lathe is a heavy vertical lathe that can be used to turn large parts. The machine was supplied to enterprises of the heavy, energy and nuclear industries, enterprises of the oil and gas industry, and was also exported. The 1550 lathe has proven itself to be reliable and unpretentious, not requiring special attention. The largest diameter of the installed product - 5000mm The greatest height of the installed product - 3200mm Faceplate diameter 5000mm The maximum weight of the processed product is 50t. H=8315mm H=12900mm L=7500mm Carousel machine model KU-281 Electric motors П112N125kw n=330-1000-2200rpm PNF45 N=6.5 kW; n=14-2800rpm AOS2-51-4 N=8.7 kW n=1335 rpm AOS2-61-4 N=14.5 kW n=1350 rpm AO2-31-4 N=2.2 kW n=14200 rpm AOS2-21-4 N=13kW n=1300 rpm AO2-22-2 N=2.2 kW n=2850 rpm AO62-4 N=10kw n=1400 rpm And also Angle head for machine KU-281 for dr ...

Table dimensions: 1000 x 1000 mm table load: 4000 Kg swivelling range: 105 Grad turning speeds: 0,15 - 1,5 U/min height adjustment: 1010 - 1836 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 8000 Nm total power requirement: 6,0 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection) ...

faceplate diameter: 2250 mm swing diameter: 4500 mm turning height: 2000 mm turning diameter: 3150 mm workpiece weight max.: 25000 kg total power requirement: 55 kW weight of the machine ca.: ca. 32 t required space: / m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1200 x 1200 mm table load: 10000 Kg swivelling range: 105 Grad turning speeds: 0,07 x 0,6 U/min height adjustment: 1450 - 2450 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 20000 Nm total power requirement: 12,1 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protecti ...

Table dimensions: 1000 x 1000 mm table load: 2500 Kg swivelling range: 105 Grad turning speeds: 0,15 - 2,0 U/min height adjustment: 1010 - 1836 mm hollow spindle diameter: mm welding current: 700 Ampere max. torque on the faceplate: 5000 Nm total power requirement: 6,0 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)  ...

Table dimensions: 1200 x 1200 mm table load: 7000 Kg swivelling range: 105 Grad turning speeds: 0,07 x 0,6 U/min height adjustment: 1450 - 2450 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 14000 Nm total power requirement: 8,2 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection ...

faceplate diameter: 1200 mm tool adaptor: DIN 55027/11 bore: 140 mm width: 110 mm weight: ca. 800 kg Clamping disc with 6 studs. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 200 mm turning length: 1500 mm turning diameter in the gap: mm turning speeds: 28 - 1400 U/min centre height: 200 mm spindle bore: 50 mm total power requirement: 10,4 kW weight of the machine ca.: 2,85 t dimensions of the machine ca.: 3,5 x 1,4 x 1,6 m Center lathe - Rapid traverse - Faceplate 400mm - Multifix steel holder - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 20 mm tailstock quill taper MT: 2 tailstock quill stroke: 60 mm metric threading: 0,4 - 3,0 mm thread - inch: 10 - 44 TPI thread - module: 0,2 - 12,5 mm connected load frequency: 230 V total power requirement: 1,0 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 630 mm z-travel: 550 mm control: TNC 640 Millturn Heidenhain Main spindle: turning speed range - main spindle: max. 12.000 U/min power capacity - main spindel: 7,5 - 22,5 kW max. Torque: 140 Nm tool taper: HSK-A 63 NC-Rotary table:: faceplate diameter: 280 mm T-slots: H7 x 50 measuring system: ECN 225 swivellable: +/-120 ° Torque: max. 180 Nm Holding Torque: 800 Nm max. table load: 320 kg turning speeds: 200 min/-1 Tool-Presetter:: numbers of positions in the tool changer: 40 max. tool diameter: 75 mm max. tool-dia with free toolbox: 160 mm max. tool length: 320 mm max. tool weight: 4 kg feed: rapid travel ( X / Y / Z ): 60 m/min total power requirement: 31 kVA weight of the machine ca.: 7,8 t dimensions of the machine ca.: 5,0 x 6,0 x 3,0 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: triple signal li ...

TOS W100 Horizontal Boring Mill DRO Spindle 100 mm Spindle speeds 7.1-1120 rpm X/Y/Z/W Axis- 1600/1120/1250/900 mm Table size 1250x1250 mm Max table load 3 ton Table type rotary Facing chuck diameter 600 mm Slide travel 210 mm Max facing diameter 900 mm Facing chuck speed range 7.1 - 224 rpm Total power 15 kW Dimension 6020x3000x3500 Weight 14000 kg Remarks: faceplate is available, under a fixture

faceplate diameter: 3000 mm swing diameter: 3400 mm turning height: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Main technical details: - Spindle diameter: 100 mm - Table size: 1100 x 1300 mm - Travels: 1250 x 1250 x 700 mm - Main motor power: 11 kW - Machine weight 14,5 to - Functional - With faceplate - With tail stock - With technical documentation

Colchester VS 2500 CAPACITY Swing over bed 400mm 15.7″ Swing over cross slide 246mm 9.6″ Height of centres 195mm 7.7″ Swing in gap 585mm 23″ Gap width from faceplate 165mm 6.5″ Bed length 1270mm 50″ Distance between centres 1270mm 30″ SPINDLE Spindle nose D1 – 6 Camlock Taper in spindle nose bush No 4 MT Spindle bore 54mm 2.1″ Maximum spindle speed 2500 rpm 2500 rpm Spindle speed ranges Low 14 – 300 rpm Medium 36 – 830 rpm High 109 – 2500 rpm Maximum spindle motor power 7.5kW 10 HP Number of Imperial Pitches 56 Range of Imperial Pitches 2 – 56 TPI Number of Diametral Pitches 20 Range of Diametral Pitches 8 – 56 DP Number of Metric Pitches 51 Range of Metric Pitches 0.2 – 14mm Pitch Number of Module Pitches 20 Range of Module Pitches 0.2 – 3.5 MOD

Capacity Swing over bed 400mm 15.7″ Swing over cross slide 246mm 9.6″ Height of centres 195mm 7.7″ Swing in gap 585mm 23″ Gap width from faceplate 165mm 6.5″ Bed length 1270mm 50″ Distance between centres 1270mm 50″ Spindle Spindle nose D1 – 6 Camlock D1 – 6 Camlock Taper in spindle nose bush No 4 MT No 4 MT Spindle bore 54mm 2.1″ Maximum spindle speed 2500 rpm 2500 rpm Spindle speed ranges Low 14 – 300 rpm 14 – 300 rpm Medium 36 – 830 rpm 36 – 830 rpm High 109 – 2500 rpm 109 – 2500 rpm Maximum spindle motor power 7.5kW 10 HP Number of Imperial Pitches 56 56 Range of Imperial Pitches 2 – 56 TPI 2 – 56 TPI Number of Diametral Pitches 20 20 Range of Diametral Pitches 8 – 56 DP 8 – 56 DP Number of Metric Pitches 51 51 Range of Metric Pitches 0.2 – 14mm Pitch 0.2 – 14mm Pitch Number of Module Pitches 20 ...

table load: 110 Kg table load capacity: 55 kg. vertikal table diameter: 250 mm hollow spindle diameter: 65 mm chucking diameter: 200 mm swivelling range: 0 / 30 / 60 / 90 Grad turning speeds: 0 - 8 stufenlos U/min total power requirement: 0,15 KW weight of the machine ca.: 25 Kg dimensions of the machine ca.: 0,5 x 0,53 x 0,6 m Welding turntable with - large passage 60mm - Footswitch - tilt/swivel by hand - Speed infinitely adjustable - 250 amp welding current transmission - Bore in faceplate 60mm. Demonstration machine documentation only in English. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 2800 mm turning height: 1195 mm Control: Siemens 840 D turning speeds: 224 U/min x-travel: +-1600 mm z-travel: 1100 mm machine table: diameter: 2500 mm workpiece weight: 25000 kg power capacity: 80 kW Torque: 35900 Nm total power requirement: kW weight of the machine ca.: 66,5 t dimensions of the machine ca.: m faceplate diameter: mm Dörries 6, Machine no. V-800293 - Fixed crossbeam, no tool drive Ram -Cross section of ram: 250 x 250 mm -Travel ram: 1100 mm Equipment/accessories: -Tool changer revolver 4-times in the ram -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm swing diameter: 2900 mm turning height: 1650 mm slides vertical travel: 850 mm side head - cross travel: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1500 mm turning height: 1200 mm slide adjustment: 700 mm Side head: 620 mm turning speeds: 4-315 U/min total power requirement: 45 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1000 mm table load: 1200 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min max. torque on the faceplate: 900 Nm welding current: 500 Ampere total power requirement: 0,75 + 0,75 kW weight of the machine ca.: 0,8 t Welding rotary tilting table - Remote control - 2 x welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 950 mm turning diameter over slide rest: 569 mm turning length: 2200 mm spindle bore: 90 mm faceplate: 800 mm steady: 500 bed width: 580 mm Rapid travel: turning speeds: 800 U/min digital readout: stepless reg. with elect. turning speeds: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x2x1,8 m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mm swing diameter: 1600 mm turning height: 1250 mm slide adjustment: 800 mm Control: Siemens type: 840 c power capacity: 56 kW : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1450 mm turning height: 800 mm slide adjustment: 750 mm Control: Siemens type: 840 D power capacity: 56 kW tool holder: 5 Pos main drive: 22 kW transmission ratio: 2 turning speeds: 90/160 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1550 mm swing diameter: 1750 mm turning height: 1250 mm slide adjustment: 700 mm Control: Siemens type: 840 D power capacity: 56 kW transmission ratio: 2 turning speeds: 200 U/min : live tooling: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1020 mm turning diameter over slide rest: 680 mm turning length: 3100 mm spindle bore: 108 mm faceplate: 1000 mm steady: 500 bed width: 570 mm Rapid travel: turning speeds: 4,5-900 U/min digital readout: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x2x1,8 m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mm swing diameter: 1500 mm turning height: 1700 mm Control: Siemens type: 810 transmission ratio: 2 turning speeds: 500 U/min Tools changer for 12 tools: paper filter: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1100 mm turning diameter over slide rest: 650 mm turning length: 3500 mm spindle bore: 108 mm faceplate: 1000 mm steady: 500 Control: Siemens type: 840 D bed width: 750 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x2x1,8 m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Machine number 3317 Including 2 steady rests, tailstock, faceplate diameter 1000 mm Drehlänge: 9,500 mm, turning diameter over bed: 1,500 mm, turning diameter over slide: 1,100 mm, spindle bore: 90 mm, weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 18,500 x 3,000 x 1,900 mm

Description: Including faceplate, multifix base holder, tailstock, digital display Drehlänge: 549 mm, turning diameter over bed: 740 mm, turning diameter over slide: 540 mm, spindle bore: 130 mm, weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 8,000 x 800 x 2,000 mm

Description: Including faceplate, diameter 1600 mm, tailstock and steady rest , Machine number 3907 Drehlänge: 6,500 mm, turning diameter over bed: 2,400 mm, turning diameter over slide: 2,000 mm, spindle bore: 80 mm, control: SIEMENS SINUMERIK, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 11,000 x 2,450 x 2,750 mm

Description: Turning length: approx. 1600 mm Center height above bed: 400 mm Turning diameter over bed: 800 mm Center height above support: 300 mm Turning diameter over support: approx. 600 mm The machine is equipped with a tailstock and a three-jaw chuck (diameter: 180 mm) Spindle speed: 56 - 2250 rpm Incl. two-axis digital readout from the manufacturer ANILAM as well as a faceplate (diameter: 300 mm) and a four-jaw chuck (diameter: 250 mm) Approx. Onsite Dimension. (l x w x h): 3,000 x 1,300 x 1,800 mm, weight approx.: 1,500 kg

grinding diameter: 4000 mm grinding length: 6000 mm swing diameter: mm clamping length max.: 6000 mm grinding spindle speed: 420 - 1110 U/min grinding wheel peripheral speeds:: 1800 m/min grinding motor: 15 kW grinding wheel size: 760 x 90 x 304,8 mm faceplate turning speed range -stepless-: 3 - 30 U/min drive capacity - workpiece: 15 kW feed range - grinding spindle: - mm/min workpiece weight: 15 + t total power requirement: - kW weight of the machine ca.: ca 30 t dimensions of the machine ca.: ca 13 x 2,6 m Heavy-duty roll grinding machine - workpiece drive - tailstock - coolant system - various steady rests - polishing motor - crowning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection Turning diameter over bed 250 mm Turning diameter over support 130 mm Turning length 550 mm Speed 50 - 2000 rpm Center height 125 mm Spindle bore 20 mm Tailstock quill mount MK 2 Tailstock quill stroke 60 mm Metric threads 0.4 - 3.0 mm Thread - inch 10 - 44 TPI Thread - module 0.2 - 12.5 mm Connection voltage 230 V Total power requirement 1.0 kW Machine weight approx. 0.12 t Space requirement approx. 1.09 x 0.59 x 0.45 m weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,410 x 610 x 410 mm

Description: 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Space requirement approx. 1.9 x 0.8 x 1.56 m weight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 800 x 1,560 mm

Description: Center lathe - Rapid traverse - Faceplate 400mm - Multifix steel holder - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Machine light Turning diameter over bed 400 mm Turning diameter over support 200 mm Turning length 1500 mm Speed 28 - 1400 rpm Center height 200 mm Spindle bore 50 mm Total power requirement 10.4 kW Machine weight approx. 2.85 t Space requirement approx. 3.5 x 1.4 x 1.6 m weight approx.: 2,850 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,400 x 1,600 mm

Description: Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools. Turning diameter over bed 290 mm Turning diameter over support 170 mm Turning length 750 mm Speed 75 - 2000 rpm Center height 145 mm Spindle bore 38 mm Tailstock quill mount MK 3 MK Tailstock quill stroke 80 mm Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.34 t Space requirement approx. 1.3 x 0.75 x 0.7 m Approx. Onsite Dimension. (l x w x h): 1,300 x 750 x 700 mm, weight approx.: 340 kg

Description: Professional lathe 3-jaw chuck 4-jaw chuck faceplate Bezel fixed Bezel rotating Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Center height 160 mm Spindle bore 50 mm Tailstock quill mount MK 3 Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m weight approx.: 290 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 1,560 mm

Description: 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill mount MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Space requirement approx. 1.9 x 0.8 x 1.56 m weight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 800 x 1,560 mm

Description: 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool Turning diameter over bed 400 mm Turning diameter over support 280 mm Turning length 1000 mm Speed 70 - 2000 rpm Center height 195 mm Spindle bore 54 mm Connection voltage 400 V Total power requirement 2.2 kW Machine weight approx. 0.85 t Space requirement approx. 1.95 x 1.0 x 1.75 m weight approx.: 850 kg, Approx. Onsite Dimension. (l x w x h): 1,950 x 1,000 x 1,750 mm