faceplate used for sale

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 340 mm -Admission thread: M75 x 6 mm -Weight: 23 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 440 mm -Weight: 74 kg

Face plate, face plate chuck -Chuck size: Ø 500 mm -Camlock: short cone flange, cone size 8, bolt circle Ø 171.4 mm -Weight: 54 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 500 mm -Fixing type thread: M110 x 6 mm -Weight: 72 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 490 mm -Short taper mount for: bayonet disc mounting, cone size 8 -Hole circle: Ø 171.4 mm -Weight: 72 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: 430 mm -Short taper mount for: bayonet mount, taper size 6 -Hole circle: Ø 133.4 mm -Weight: 72 kg

1 set of jaws for flat disc 4305- 800 mm NEW

New Lambertini 4 jaw independent chuck 500 mm adaptation DIN 55027 - 11

Flat disc Bison 500 mm direct opname 55027-6 1 klauw heeft een lichte kras, verder als nieuw !

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 350 mm -Admission thread: M68 x 6 mm -Weight: 20 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 400 mm -Cone holder with groove: Ø 105 mm -Throughout: Ø 80 mm -Weight: 35 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 380 mm -Admission thread: M76 x 6 mm -Weight: 38 kg

Planscheibein little used condition Manufacturer TG Diameter approx.610mm Body bearing traces (can be easily removed!) Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

Planscheibein little used condition Manufacturer TG Diameter approx.500mm Body bearing traces (can be easily removed!) Through hole, approx. 90 mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

Planscheibein little used condition in wooden box Manufacturer presumably Röhm Diameter approx.610mm Through hole approx. xxx mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

New planboard Roehm 600 mm Direct recording Camlock - 8

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 450 mm -Thread mounting type: M76 x 6 mm -Weight: 43 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 450 mm -Passage: Ø 133 mm -Short taper mount: Ø 140 mm -Hole circle: Ø 172 mm -Weight: 52 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 660 mm -Taper cone: Ø mm -Thread mounting inside: M124 x 6 mm -Through hole: Ø mm -Weight: 170 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 250 mm -Admission recess: Ø 103 mm -Hole circle: 133 mm -Through hole: Ø 75 mm -Weight: 23 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 350 mm -Rezess: Ø 80 mm -Hole circle: Ø 127 mm -Through hole: Ø 40 mm -Weight: 40 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 330 mm -Taper cone: Ø mm -Thread holder inside: M56 x 5 mm -Through hole: Ø 51 mm -Weight: 23 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 750 mm -Short taper: 8 (Ø 140 mm) -Hole circle: Ø 171 mm -Weight: 248 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 196 mm -with: T slot 14 mm -Through hole: 20 mm -Total height: 75 mm -Rezess: Ø mm -Hole circle: Ø 99 mm -Weight: 8.8 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 900 mm -Short taper: 11 -Cone: Ø 196 mm -Hole circle: Ø 235 mm -Through hole: Ø mm -Weight: 238 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 102 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 74 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Short taper: 6 -Flange: Ø 106 mm -Hole circle: Ø 135 mm -Through hole: Ø mm -Weight: 65 kg

diameter:310 mm weight of the machine ca.:0,03 t bore:65 mm

Face plate, face plate chuck, four-jaw chuck, face lathe chuck -Face plate: chuck size Ø 560 mm -Intake: short taper 11 -Bolt circle: Ø 235 mm -Through hole: Ø 140 mm -T-slot: slot width 22 mm -Weight: 109 kg

Face plate, face plate chuck, four-jaw chuck, face lathe chuck -Manufacturer: Werner-Garant, face plate type A 560 chuck size Ø 710 mm -Intake: short taper 8 -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 209 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Transfer: in the current condition as seen -Face plate: without jaws -Chuck size: Ø 770 mm -Shot: short taper 11 -Hole circle: Ø 235 mm -Through hole: Ø 120 mm -Groove width: 24 mm -Weight: 234 kg

Face plate, face plate chuck, four-jaw chuck -Manufacturer: FUP -Type: PUUf-M400C6ZJ -Chuck size: Ø 400 mm -Short taper mount for: bayonet disc -Short taper size: 6 -Short cone diameter: 106.375 mm -Hole circle: Ø 133.4 mm -Number: 2x available -Price: per piece -Weight: 57 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 400 mm -Cone size: 6 -Short taper mount for: bayonet disc -Short taper mount: Ø 106.375 mm -Hole circle: Ø 133.4 mm -Through hole: Ø 90 mm -Weight: 51 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Short taper: 6 (Ø 106 mm) -Through hole: Ø 80 mm -Weight: 82 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 558 mm -Short cone flange for: bayonet disc mounting, cone size 8 -Lock rice: Ø 171.4 mm -without: bolt -Through hole: Ø 90 mm -Weight: 74 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 460 mm -Taper cone: Ø 100 mm -Thread intake outside: 152 mm pitch 6G 1 3/8 1 1/2 -Through hole: Ø 84 mm -Weight: 56 kg

Face plate, face plate chuck, four-jaw chuck -Transfer in current condition as seen -Chuck size: Ø 360 mm -2x thread mounts are missing -2x jaws are missing -Admission: M 47 x 4 mm -Through hole: Ø 43 mm -Weight: 23 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 172 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 80 kg

Face plate, face plate chuck, four-jaw chuck -Transfer in current condition as seen -Chuck size: Ø 500 mm -a thread mount is missing -all 4 jaws are missing -Cone: Ø 105 mm -Through hole: Ø 80 mm -Hole circle: Ø 132 mm -Weight: 45 kg

faceplate diameter: 3200 mm swing diameter: 3500 mm turning height: 2200 mm range L-W-H: 7730 x 6240 x 6700 mm control: Typ 840 D sl voltage: 3 x 400 V frequency: 50 Hz turning speeds: 0,8 - 40 U/min max. turning diameter: 3500 mm total power requirement: 51 kW weight of the machine ca.: 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports S ...

faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1000 mm turning speeds: 4-16-20-80-315 U/min total power requirement: 55 kW Machine no.: 379066 With copy facility Base, faceplate and main drive Faceplate diameter: 1000mm Distance from the floor to the top edge of the faceplate: 900mm Permissible faceplate load: 8000kg stands and crossbeams Vertical adjustment of the crossbar: 800mm Adjustment of the transom per minute: 450mm crossbar support Largest outside diameter: 1150mm Largest turning height: 1150mm Largest turning height with a workpiece diameter of up to 800m: 1750mm Largest distance between faceplate and square turret head: 1375mm Largest vertical adjustment of the turret slide: 700mm Dimension of square turret head: 400x400mm Smallest immersion diameter for the turret head: 580mm feed box Number of feeds: 24 Increment: 1.25 The data for this ad was created  ...

table diameter: 5600 mm table load: 150 t x-travel: / mm total power requirement: 88 kW weight of the machine ca.: 55 t Round table dm 5600 mm / 150 to load Round table dia. 5600mm / 150 to load Equipment: Table with drive motor Status: decommissioned since 1980 Machine type:C.T.F Diameter core faceplate: ?3000 mm Diameter ring faceplate: ?5600 mm Core and ring faceplate can be coupled: yes Faceplate divisible into segments: no Max. workpiece weight: 150000 kg Table weight approx.:55000 kg Dimensions: Dm 5600 x H 1500 mm filming operation Speed: 0.1 - 20 rpm Rotation levels:4 Drive power: ?88 KW milling operation Speed: 0.0002 - 0.2 rpm Peripheral speed (5000 mm):?3140 mm/min Drive power: ?11 KW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I. Working capacity -Faceplate diameter 2000 mm -Workpiece max. diameter 2200 mm -Workpiece max. height: -under the cross rail 1850 mm -Workpiece max. weight 20 tons II. Movable cross rail : - Stroke on the column 1600 mm - Rapid moving speed 400 mm/min - Slow moving speed 10 mm/min III. Faceplate main drive in the turning mode. -Main drive motor power 60 kW -Faceplate speed range 250 rev/min IV. Working support: -Ram stroke (Z axis) 1500mm -Ram section 250x250 mm -Ram/taper ISO 50 -Tool magazine, tool number 16 (left tool magazine with milling tools and right tool magazine with turning tools or mixed) -Milling shaft drive motor power 37 kW -One tool holder max. Weight 30-70 Kg -Milling spindle speed 1 - 2000 rev/min V. Feeds -X, Z axes working feeds 1 – 6.000 mm -C – axis feeds (faceplate-milling mode) 0,001 + 2, 7 rev /min -Rapid feeds 10.000 mm/min  ...

:HBM-130XL spindle diameter:130 mm x-travel:2000 mm y-travel:1800 mm z-travel:(ohne Gegenhalter) 2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3136 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:10 t table-size:1800 x 1600 mm T-slots:11 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:29300 kg main drive:15 kW Machine size (LxWxH):7030x4665x3800 mm 2-Axis DRO :von NEWALL f. X- und Y-Achse Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure rate reduced ? High rigidity spindle could insure the strong machining ? Worktable 4x90° position  ...

:HBM-130 | HBM-130L | HBM-130XL spindle diameter:130|130|130 mm x-travel:1600|2000|2000 mm y-travel:1400|1800|1800 mm z-travel:2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3200 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:8|10|10 t table-size:1600 x 1400|1800 x 1600|2200 x 2000 mm T-slots:9/11/12 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:22,5|24,5|25,5 t main drive:22 kW Machine size (LxWxH):6995/3647/342|7030/4665/3800|7030/4665/3800 mm PLC control:Siemens S7 servo motors:von Siemens/Fanuc/Fagor Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower mainten ...

Facing lathe make HEYLIGENSTAEDT type 405 EVMachine -No: 581242229/189623 Year of construction 1965 with sliding upper bedTop width: 1750 mmTop height from the underbed: 405 mmTurning diameter over bed: 810 mmTurning diameter over bed slide: 620 mmTurning diameter in the crank: 1500 mmLength of the offset in front of the faceplate: 750 mmCamber width: 0 - 400 mm18 spindle speeds: 9 - 450/14 - 710 rpm.42 feeds: 0.09 - 5.6 mm / rev42 flat feeds: 0.045 - 2.8 mm / revFaceplate diameter: 800 mmSpindle bore: 86 mmBed width: 540 mmDrive power: 14 kWDimensions approx: 4000 x 1500 x 2200 mmWeight approx: 6,0 tWith- new main spindle- sliding upper bed- Faceplate Drm. 1200 mm- Faceplate Drm. 800 mm- Multifix steel holder with 3 cassettesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not bind ...

Technical data: -Load capacity 30 kg -Faceplate diameter 280 mm -Faceplate swivel - faceplate RPM elect. infinitely variable - re + Li - run -Foot switch -Transmission of welding current 300 A -Drive 220 V - table height in horizontal position 360 / 890 mm -mobile base -3 jaw Chuck -Space requirement approx. B 550 x H 890 x T 550 mm -Weight approx. 50 kg

Technical data: -max load capacity 3000 kg -Faceplate cross 1600 x 1600 mm -Faceplate cross extension tubes - faceplate cross mot. adjustable 0-90 / 135 ° - rotation infinitely variable 0,01-4 U/min -Right - + rotation control -Transmission of welding current approx. 500 A -400 V - table height in horiz drive. Position without stand approx. 1200 mm -Table height at horiz. Position with frame approx. 2200 mm -Space requirement approx. B H 1600 x 1200 + 1000 X 2400 mm -Weight approx. 2700 kg

faceplate diameter: 4500 mm swing diameter: 5000 mm turning height: 2645 mm control: Siemens 840 D cross rail adjustment - vertical: 1500 mm max. ram stroke: 2000 mm ram head dimension: 300 x 300 mm faceplate turning speed range: 0,4 - 95 U/min main drive: 2 x 80 kW faceplate load max.: 80.000 kg Equipment / Accessories: - C-axis driven tools HSK 100, 37 kW, 3000 rpm - hydrostatic guides of the linear axes - UWFK milling head 500 Nm +/- 90°, tool and workpiece measurement - tool and process monitoring ARTIS CTM system - workspace visualisation via video camera on the support - tool magazine (arranged on the floor) for turning and milling tools as well as storage for milling heads - work area protection completely closed with automatic covering of the chip chutes - coolant system with filter system, chip conveyor - various tool holders - documentation The data for this ad was created ...

faceplate diameter: 3.000 mm swing diameter: 3.200 mm turning height: 2.200 mm Control: 840 D ShopTurn Siemens cross rail adjustment: 1.500 mm tool travel: 1.250 mm faceplate turning speed range: 0 - 120 U/min power capacity: 75 kW Driven Tool Stations:: speeds: 10 - 3.000 U/min output: 22 kW max. Torque: 320 Nm tool adaptor: HSK 160 (VDI 60) tool magazin:: number of toolpositions: 16 pos. weight of tools max.: 25 kg total power requirement: - kW weight of the machine ca.: 36 t dimensions of the machine ca.: 6,0 x 6,0 x 3,5 m Chip conveyor: Coolantsystem: C-axis: 0,001° hydraulic system: Tool Magazine: 16 pos. tool holders: div. Vertical Turning Machine KONRAD SEIDLER - Vertimaxx 3000 - including clamping material, various tool holders - 1x angle bore and milling head 90° Drive spindle according to SEIDLER HSK 160B Output spindle ABS 63 Gear ratio i 1:1 Max. speed 2300 rpm (co ...