face used for sale

turning diameter over bed: 720 mm turning diameter over slide rest: 500 mm turning length: 1000 mm spindle turning speed range: 7.1 - 1800 U/min feeds - fine adjustment: 6 - 6,28 mm/U feeds crossrail-slide horizontal: 0,005 - 6,28 mm/U spindle drive: 15 kW centre height: 360 mm spindle bore: 82 mm total power requirement: 28 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,8 x 1,4 x 1,8 m 3-jaw chuck: 315 mm Qick Toolholders: Multifix GR. 8 Digital Read Out: Acu-Rite Face plate: 600 mm motorized top slide: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1), X, Y, Z (mm) 800 – 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, Max dia 65mm, RPM: 15 / 4500, Max 42,5 KW / 90 Nm., Hydraulic clamping 800 Nm., Bar loader ILS-RBK- 10012 65, Diameters min/max 5/65 mm L= 600-1200 mm, Highspeed (2), 60m/min., Spindle 20-12.000 min.â ...

Bear weight: 1t, max. impact energy: 27kJ, stroke rate: 95/min, max. stroke: 950mm, working height: 800mm, drop face dimensions: 365x180mm, connected load: 75kW, length: 4125mm, width: 1500mm, height: 3662mm, weight: 20t, with documentation, on-site inspection is possible.

Max. nominal load: 6t, face plate diameter: 1440mm, number of clamping grooves: 4, length: 3650mm, width: 1850mm, height: 700mm, weight: 5t, with documentation.

turning diameter over bed: 490 mm turning diameter over slide rest: 280 mm turning length: 2000 mm centre height: 245 mm centre distance: 2000 mm spindle bore: 62 mm total power requirement: 7,5 kW weight of the machine ca.: 3,5 t dimensions of machine L x W x H: 3,78 x 1,17 x 1,42 m Accessories: 3-jaw chuck 240 mmø, face plate 400 mmø, MULTIFIX-tool post, solid steady, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Face disc - Lighting system - Coolant sealing Specification - Center width: 1000 mm - Circulating Ø over bed: 500 mm - Circulation Ø over slide: 325 mm - Orbital Ø in eruption: 630 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Transverse feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock pinole ...

Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo

Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo

Band width: 0 mm Motor power: 0 HP/kW CNC Brand: _Unknown / Other Open face pneumatic lift version 3 lapping rings Wide variety: semiconductors, electro-optics, ceramic, metal 1000 mm serrates lapping plate Power 5,5 kW Length:2.400 mm  Width:2.200 mm  Height:1.400 mm  Weight:3.900 kg 

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

turning diameter over bed: 325 mm turning diameter over slide rest: 190 mm turning length: 750 (500 o.1000) mm spindle bore: 32 mm turning dia. in gap: 440 mm spindle turning speed range: (12) 85 - 2000 U/min metric threading: (48) 0,1 -28 mm thread - inch: (53) 75 -2,5 inch. thread - module: (19) 0,1 - 1,75 Tpi Whitworth-thread: (19) 70 - 4 DP bed width: 200 mm spindle cone: gr. 5 number of feeds: 48 mm/U longitudinal feeds:: 0,006 - 1,77 mm/U face feeds: 0,003 - 0,888 mm upper slide-adjustment: 95 mm diameter of quill: 40 mm : gr. 3 quill stroke: 100 mm total power requirement: 2,2 kW weight of the machine ca.: 720 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU 325 is ideal for small ...

turning diameter over bed: 440 mm turning diameter over slide rest: 230 mm turning length: 2000 (or 1000, 1500 mm) mm spindle bore: 62 mm turning dia. in gap: 620 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 360 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 2150 mm upper slide-adjustment: 130 mm diameter of quill: 70 mm : MK 5 quill stroke: 180 mm total power requirement: 4,0 kW weight of the machine ca.: 2560 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 (or 1500, 2000 mm) mm spindle bore: 62 mm turning dia. in gap: 620 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 360 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 2150 mm upper slide-adjustment: 130 mm diameter of quill: 70 mm : MK 5 quill stroke: 180 mm total power requirement: 4,0 kW weight of the machine ca.: 2230 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU ...

turning diameter over bed: 400 mm turning diameter over slide rest: 236 mm turning length: 1500 (or 750, 1000) mm spindle bore: 52 mm turning dia. in gap: 550 mm spindle turning speed range: (12) 50 - 2240 U/min metric threading: 0,25 - 7,5 mm thread - inch: 120 - 4 inch. thread - module: 0,0625 - 1,875 Tpi Whitworth-thread: 480 - 16 DP bed width: 320 mm spindle cone: gr. 6 (DIN 55027) number of feeds: 80 mm/U longitudinal feeds:: 0,015 - 0,6 mm/U face feeds: 0,0075 - 0,3 mm cross adjustment: 235 mm upper slide-adjustment: 110 mm diameter of quill: 50 mm : MK 4 quill stroke: 100 mm total power requirement: 4,0 kW weight of the machine ca.: 1700 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. T ...

turning diameter over bed: 440 mm turning diameter over slide rest: 230 mm turning length: 1000 (or 1000, 2000 mm) mm spindle bore: 62 mm turning dia. in gap: 620 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 360 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 2150 mm upper slide-adjustment: 130 mm diameter of quill: 70 mm : MK 5 quill stroke: 180 mm total power requirement: 4,0 kW weight of the machine ca.: 2560 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 2000 (or 1000, 1500 mm) mm spindle bore: 62 mm turning dia. in gap: 620 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 360 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 2150 mm upper slide-adjustment: 130 mm diameter of quill: 70 mm : MK 5 quill stroke: 180 mm total power requirement: 4,0 kW weight of the machine ca.: 2630 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1500 (or 1000, 2000 mm) mm spindle bore: 62 mm turning dia. in gap: 620 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 360 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 2150 mm upper slide-adjustment: 130 mm diameter of quill: 70 mm : MK 5 quill stroke: 180 mm total power requirement: 4,0 kW weight of the machine ca.: 2430 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU ...

turning diameter over bed: 400 mm turning diameter over slide rest: 236 mm turning length: 1000 (or 750, 1500) mm spindle bore: 52 mm turning dia. in gap: 550 mm spindle turning speed range: (12) 50 - 2240 U/min metric threading: 0,25 - 7,5 mm thread - inch: 120 - 4 inch. thread - module: 0,0625 - 1,875 Tpi Whitworth-thread: 480 - 16 DP bed width: 320 mm spindle cone: gr. 6 (DIN 55027) number of feeds: 80 mm/U longitudinal feeds:: 0,015 - 0,6 mm/U face feeds: 0,0075 - 0,3 mm cross adjustment: 235 mm upper slide-adjustment: 110 mm diameter of quill: 50 mm : MK 4 quill stroke: 100 mm total power requirement: 4,0 kW weight of the machine ca.: 1400 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. T ...

turning diameter over bed: 440 mm turning diameter over slide rest: 230 mm turning length: 1500 mm(or 1000, 2000mm) mm spindle bore: 62 mm turning dia. in gap: 620 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 360 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 250 mm upper slide-adjustment: 130 mm diameter of quill: 70 mm : MK 5 quill stroke: 180 mm total power requirement: 4,0 kW weight of the machine ca.: 2350 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU ...

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 1000 (1500, 2000- 5000mm) mm spindle bore: 72 mm turning dia. in gap: 640 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 2900 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use.  ...

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 1500 (1000, 5000mm) mm spindle bore: 72 mm turning dia. in gap: 640 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 3100 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3100 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The C ...

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 2000 (1000, 1500 -5000mm) mm spindle bore: 72 mm turning dia. in gap: 640 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 3100 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3300 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 1500 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 2910 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 5000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 640 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 3500 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3900 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The  ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 5000 (1000 - 5000 mm) mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3680 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 (1500 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 2950 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 4000 (1000 - 5000 mm) mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3480 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 5000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3750 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 2000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3150 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 2000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3010 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 3000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3350 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 1000 (1500 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 2810 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 2800 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 4000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3550 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1500 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3150 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 4000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 640 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 3500 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3700 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The  ...

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 3000 (1000, 1500 -5000mm) mm spindle bore: 72 mm turning dia. in gap: 640 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 3500 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3500 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 3000 (1000 - 5000 mm) mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3210 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also ...

CNC milling machine ZX7124F table 900x230mm new/unused Description Was intended for project, but was never used. Private sale without warranty. Pick-up only: Mobile phone 015121271265 Table size 900 mm×230 mm T slot number spacing 3×14 mm The biggest hole diameter Ф20 mm End mill diameter Ф20 mm Spindle allowed maximum 150N.m Spindle speed 20~6000rpm The spindle taper BT30 The spindle end face to the 80~480 mm Spindle center distance to 300 mm The motor power 2.2KW Moving range (X, Y, Z) 500×280×400(mm) 12 Fast moving speed (X, Y, Z) 6000×6000×6000(m/min) Repeat positioning accuracy ±0.02 mm The feed motor power (X, Y, 4×4×7(N.m) Cooling pump motor power 0.09KW The power supply voltage 380V、50HZ The weight of the 1400 kg The environmental 0°C ~45°C

turning length: 1000 mm turning diameter: 360 mm turning dia. in gap: 480 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 110 mm total power requirement: 1,5 kW weight of the machine ca.: 540 kg. range L-W-H: 1920 x 750 x 1600 mm Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE ...

turning length: 1000 mm turning diameter: 380 mm turning dia. in gap: 490 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1920 x 800 x 1660 mm Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according ...

36″ x .125″ x 15,000Lbs Yoder Slitting Line Make: Yoder, Material Width: 36”, Gauge: .010” – 125”, Weight Capacity: 15,000Lbs, Coil ID: 16”-20”, Coil OD: 62”, Direction: Right to Left. Mandrel Uncoiler, 3-Leaf Mandrel Design, Hydraulic Expansion, Air Brake. Slitting Head, Entry Driven Pinch Rolls, Arbor Diameter: 5”, Arbor Width: 39”, Adjustable Outboard, Manual Arbor Adjustment, 15HP Feed-Up Motor, DO James Gear Box. Recoiler, Face Width: 39”, Hydraulic Push-Off, Manual Grip, Strip Separators, 40HP 1775RPM Motor, DO James Gear Box. Scrap Winder, Self-Dumping Design, Mechanical with AC Motor. Electrics, hydraulics, controls, tooling. Installed

Hobbing machine make PFAUTER type RS 1Machine -No: 3108 built in 1941Technical specifications:largest diameter for face and worm gearswith / without counter holder: 400/750 mmlargest milling width for spur gears (up to 275 mm dia.over 275 mm diameter): 295 - 315 mmSmallest number of teeth to be milled: 12largest module division: 8Helical gearsHelical tooth angle: 10 ° 30 ° 45 ° 60 °largest millable wheel diameter: 750/600/500/200 mmMillable widths for the largest diameter: 270/270/270/270 mmmillable widths at Drm. under 275 mm: 260/250/245/235 mmClamping table diameter: 580 mmTable bore: 100 mmgreatest collet tension for shafts (large material passage64 mm): 65 mmsmallest axis distance between milling cutter and workpiece: 30 mmlargest axis distance between milling cutter and workpiece: 440 mmDrm. of the workpiece mandrel: 36 mmDrm. of the milling arbors: 27-32-40 mmLargest clampable ...

Single column faceplate welding rotating and swiveling device make TEHAG type SG 3Fabr. -No: 6555 built in 1974Technical specifications:Load capacity: 600 kgSwing arm torque max.: 810 kpmMaximum torque for the face plate: 140 kpmProjection: 1600 mmSwivel range: 360 °Swing speed: 0.06 - 1.2 rpmRotation speed: 0.7 rpmFaceplate size: 1100 x 1100 mmPower connection: 380 V, 50 HzControl voltage: 24 voltsDimensions L x W x H: 4000 x 1200 x 2200 mmWeight approx: 2500 kgwith- remote control- foot controllerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine Details Warehouse number 1105-03634 Machine type lathe - cycle controlled Make CAZENEUVE Type OPTICA 360 Year of construction 2000 Control type CNC Control CNC NUM Storage location FRANCE HAGUENAU Country of origin France Delivery time immediately Freight base EX WAREHOUSE Technical details Turning diameter 380 mm Turning length 750 mm Control CNC NUM Turning diameter above the face sled 200 mm Turning diameter via transverse guide 280 mm Main drive motor 11 kW Spindle speeds 2 - 3000 rpm Spindle passage 54 mm Chuck diameter 160 mm Tailstock cone MK 4 Total power requirement 14 kW Machine weight approx. 2 t Information TAECH IN CNC MACHINE CAZENEUVE OPTICA 360 FROM 2000 3 BAKING FEED TAILSTOCK

1 KUSTERS finishing foulard type 222.54-4600, face roller width 4.800 mm, working width 4.600 mm, the upper roller is S-roll, year 1969 and fully overhauled in 2011, AC motor with frequency inverter, entry with ERHARDT & LEIMER KF selvedge spreaders and scroll rollers, exit with banana roller and dancing roller for speed adjustment

x-travel: 800 mm y-travel: 700 mm z-travel: 610 mm Control: Siemens 828 D total power requirement: kW weight of the machine ca.: 8,7 t dimensions of the machine ca.: m ONLY 2800 HOURS SPINDLE WORKS Description The QUASER MF vertical machining centres are highly versatile, offering high speed, high powered machining with 4+1 and full 5-axis machining capability along with large X-axis machines with a compact footprint. Superb build quality and stability for high volume production, toolroom and subcontract machining environments. Specification Table size 500mm diameter Travels – X/Y/Z axes 800 x 700 x 610 mm A Axis + 30 deg ~ -120 deg C Axis 360 deg continous Maximum swing 630 mm Table surface to spindle nose -25mm ~ 585mm Spindle nose to tilting centre at 90 deg -25mm ~ 585mm Maximum work piece of size 630mm dia x 300mm Table load capacity 300kg Spindle taper BT40 Spindle options 10,00 ...

FRORIEP CNC Vertical Boring Mill Double Column REBUILT & CNC RETROFIT IN 1999 FEATURES: SIEMENS 840D CNC CONTROL 2-VERTICAL RAM HEADS CAPACITY: TABLE DIAMETER: 10,000mm TURNING DIAMETER WITH VERTICAL RAMS: 15,000mm MAXIMUM TURNING HEIGHT: 5000mm RAM VERTICAL TRAVEL: 2000mm RAM SWIVEL +/- 30/15 DEG MAXIMUM CUTTING FORCE RIGHT RAIL HD: 25t TABLE LOAD CAPACITY: 200t TABLE SPEED RANGES, INF VARIABLE: 4 TABLE SPEEDS: 0.13 TO 13 RPM CROSS RAIL ELEVATION MOTOR: 40.23 HP NUMBER OF FEEDS, VERTICAL & HORIZ: 30 CROSS RAIL ADJUSTMENT MOTOR 86 HP RAPID TRAVERSE MOTORS: 15.5 HP MAIN MOTOR: 250 HP EQUIPPED WITH: SIEMENS 840D CNC CONTROL NEW 1999 DUAL PENDANT OPERATED CONTROLS 2-VERTICAL CNC CONTROLLED RAMS 10,000mm DIAMETER T-SLOTTED TABLE 4-HEAVY DUTY FACE PLATE TYPE JAWS HYDROSTATIC BEARING SYSTEM FOR TABLE DUAL OPERATORS PLATFORMS DUAL JORGANSEN CHIP CONV ...

Specifications: - Load capacity 100 kg - Face disc diameter 400 mm - Faceplate infinitely tiltable - Table height with horizontal position approx. 470 mm - Rotational movement electr. infinitely variable 0 - 2.5 m/min - Welding current transmission 400 A - Drive 400 V - Right - Left rotation - Foot switch with foot roller controller for speed regulation - Ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

control: Siemens 840-D tool taper: HSK & VDI 40 - - -: - - - - - - Vertical Turning Machine | EMAG - VTC 250 DUO ED with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face drivers, - Tool holder with Capto 5, - Artis quick-change system for tool and process monitoring, - Tool pack is included, The machine is in a well-maintained condition and can be inspected at any time  ...