face used for sale

turning diameter over bed: 760 mm turning diameter over slide rest: 520 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 950 mm bed width: 560 mm spindle nose: 11 spindle bore: 132 mm transmission ratio: 3 spindle turning speed - stepless: 12,5-100, 50-415,150-1250 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 180 mm thread - inch: 60 - 1/6 inch. thread - module: 0,125 - 45 Whitworth-thread: 240 - 2/3 DP number of feeds: 150 mm/U rapid traverse longitudinal: 3800 mm/min longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 410 mm upper slide-adjustment: 150 mm rapid traverse of cross-rail supports: 1900 mm/min diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 15 (18,5) kW weight of the machine ca.: 5800 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. ...

turning diameter over bed: 660 mm turning diameter over slide rest: 420 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 850 mm bed width: 560 mm spindle nose: 11 spindle bore: 103 mm transmission ratio: 3 spindle turning speed - stepless: 9-55, 37-220, 220-1320 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 180 mm thread - inch: 60 - 1/6 inch. thread - module: 0,125 - 45 Whitworth-thread: 240 - 2/3 DP number of feeds: 150 mm/U longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 410 mm upper slide-adjustment: 150 mm diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 15 kW weight of the machine ca.: 5500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these  ...

turning diameter over bed: 860 mm turning diameter over slide rest: 620 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 1050 mm bed width: 560 mm spindle nose: 11 spindle bore: 132 mm transmission ratio: 3 spindle turning speed - stepless: 12,5-100, 50-415,150-1250 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 90 mm thread - inch: 60 - 1/3 inch. thread - module: 0,125 - 22,5 Whitworth-thread: 240 - 1 1/3 DP number of feeds: 150 mm/U rapid traverse longitudinal: 3800 mm/min longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 432 mm upper slide-adjustment: 150 mm rapid traverse of cross-rail supports: 1900 mm/min diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 18,5 kW weight of the machine ca.: 6300 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected.  ...

Carousel lathe FKD 40 Face disc diameter 4000mm Turning diameter: 4400mm Turning height: 3000mm Stoessel cross-section: 300mm x 300mm X-axis: Travel ±2200mm Z-axis: Travel 2000mm W-axis: Travel 1200mm Speed of the face disc: 0 – 100 rpm, manual transmission Speed of the Fraeser: 0 – 3000 rpm, manual transmission C-axis in the flat disc table Control: Siemens PickUp Station: 5 places centric load: 35t

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

Hydraulic rotary indexing table with face teeth FIBROTAKT Hydraulic rotary indexing table, rotary table type Y 13 630 FN3RA T6 Fabr. No. 11 136-0840 Year of construction 1981 Table diameter 630 mm Table height = height 250 mm Table passage 50 mm Switching angle 60 Hydraulic working pressure 30 bar - fixed switching step of 6 pitches - Face toothing for highest part accuracies - Hydraulic drive - Table structure with 6 hydraulic clamping devices (inner collets 90/100 mm) Space requirement table L x W x H 700 x 700 x 250 mm Space requirement with structure L x W x H 1380 x 1380 x 800 mm Weight table approx. 600 kg Weight with superstructure 1350 kg good condition; used

Type 5 Nominal weight of falling parts 1750 kg Impact energy, not less than 4878kgm Number of strokes per minute 85 Max. ram stroke 890mm Diameter of ram 455mm Ram pallet face 405x305mm Anvil pallet face from floor 535mm Height above floor 4040mm Baseplate 4405x2085mm Motor rating 110 kW Weight 40000kg Weight without anvil block 25000kg

Description SHOOTING FRORIEP 40Dv Carousel Lathe. Modernized in 1998, among other things, a driven tool system (C-axis) was installed and the control was modernized to 840 C. Details Serial number 11330051 Year of construction 1980 Control SIEMENS electrical connection 400 V Face plate diameter 3,500 mm Workpiece height 3,000 mm Face plate over corridor 160 mm Total power requirement 71 kW Space requirement approx. 13 x 6 m Reconstruction 1998

Rounds: 100 mm Squares: 100 mm Flats: 100 mm Flats on edge: 100 mm Angles: 80 mm (1) horizontal / (2) vertical: 2   Cast iron face plate diameter 1000 mm Double suppport rolling slide Rotation face plate 0 - 10 U/Min For HOT & Cold bending jobs Hardned & Grounded guideways Cast iron extra table 1600 mm Horizontal and vertical:Vertical Number of rolls:       2 Stroke X-Axis:         1200mm Capacity flat:         80 x 20mm Capacity bar:          65 x 65mm Capacity T-Profile:    100 x 100mm Working speed:         2/3/5mm/min. Adjustment siderolls:  200 Length:                3470mm Width:                 1600mm Height:      ...

Material thickness: 20 mm Punching capacity: 20 t Stroke: 20 mm Throat: 20 mm Cast iron face plate diameter 800 mm Double suppport rolling slide NC Positioning over digital readout Rotation face plate 0 - 10 U/Min For HOT & Cold bending jobs Hardned & Grounded guideways Horizontal and vertical:Vertical Number of rolls:       2 Stroke X-Axis:         770mm Resistance moment:     40CM³ Capacity flat:         80 x 20mm Capacity bar:          65mm Capacity T-Profile:    100mm Working speed:         0-10mm/min. Adjustment siderolls:  200 Control:               P2000M Length:                2800mm Width:        ...

greates pass round over bed: 175 mm swing diameter over slide rest: 350 mm centre distance: 800 mm bed width: 220 mm spindle bore: 46 mm internal taper -metric: 50 (1:20) mm chucking diameter: 160 (max. 200) mm face slide travel: 225 mm upper slide: 100 mm swival range +/-: 45 Grad lead of leadscrew: 6,0 mm quill stroke: 130 mm dia. of quill: 50 mm taper: 3 MK number of spindle speeds: 3,5-2500 min number of spindles: 18 power capacity: 4,7 kW longitudinal feeds:: 0,051-1,034 mm/U face feeds: 0,025-0,517 mm/U metric threading: 0,4-7,0 mm Dimensions (L/W/H): 1920x990x1360 mm weight of the machine ca.: 900 kg voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23093 Specifications: - Load capacity 2000 kg - Face plate diameter 1300 mm - Face plate can be swivelled up to 135 ° via geared motor - Rotary movement electr. infinitely variable - Footswitch for right-hand rotation - left-hand rotation - Welding current transmission 650 A - Drive 400 V - Table height in horizontal position 1360 mm - Space requirement approx. W 1600 x D 2200 x H 1360 mm - Weight approx. 2.0 t

Offer 23207 Specifications: - Load capacity 2500 kg - Face plate dimensions 750 x 750 mm - Face plate can be swivelled up to 135 ° via geared motor - Rotary movement electr. infinitely variable - Footswitch for right-hand rotation - left-hand rotation - Welding current transmission 650 A - Drive 400 V - Table height in horizontal position 1090 mm - Space requirement approx. W 1150 x D 1250 x H 1090 mm - Weight approx. 1.2 t

concentricity tester, concentricity tester PAGUS center height: 200 mm face plate: outer Ø: 335 mm height with jaws: 128 mm slotted holes: Ø 16 x 45 / 55 mm flange for face plate: Ø 150, PCD: Ø 105 mm Table for measuring stand: 305 x 53 mm, working height: 45 mm Measuring stand: Radius of action: 250 mm Measuring height: 300 mm Stand: 260 x 70 x 44 mm used, tested ! Dimensions: 390 x 380 x 450 mm

Face and boring head WMW B71 TGL 2607.1 mount (machine side): SK40 with insert mount used, tested ! Dimensions (face and boring head): 216 x 65 x 70 mm

x-travel: 2000 mm y-travel: 2000 mm z-travel: 1400 mm spindle stroke: 1000 mm turning speeds: 5-800 U/min Radial face slide: 700 mm Radial face slide: 2,2-115 U/min spindle taper ISO: 50 table surface area: 2000x1800 mm Table load: 14000 kg total power requirement: 42 kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 6,3x5x4,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for fully automatic grinding of all known tooth geometries (e.g. flat, alternating, trapezoidal tooth) from HM – circular saw blades on the face and back in one clamping. The free programming also allows the Machining of special tooth shapes. Accesories: Pallet loader with 3 stations,, Coolant system with total enclosure,, Integrated hollow tooth grinding device,, Software package W 1 alternate tooth,, Software package W 2 flat tooth,, Software package W 3 flat/trapezoidal tooth (with tooth height difference),, Software package W 4 flat / roof tooth (with tooth height difference),, Software package W 5 trapezoidal tooth,, Software package W 6 pointed on one side,, Software package W 7 tooth face processing,,, Software package W 8 free programming of special tooth forms,, automatic tool positioning axis, Automatic D-axis for machining chip breaker grooves, auto. fire extinguish ...

Face plate diameter: 1.250mm Center height above foundation slab: 1,250mm Weight: 19t Power: 55Kw Max. torque on the face plate: 31,500Nm Maximum workpiece mass between centres: 16,000 kg Speed range: 2.24 – 224 rpm

Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Automatic through-turn machine Genini Miniautomat Automatic rolling machine from square timber, through Main spindle with 4.9/5.9 kW two-speed motor Variable spindle speed 1800/2350/3600/4700 RPM 1.5 kW hydraulic pump motor Maximum length of scantlings 950 mm Maximum turning length 120 mm Maximum turning diameter 80 mm Two bottom brackets with profiling knives 1 face spindle for drilling or face profiling 1 roughly rolling knife

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck, three-jaw lathe chuck, face spiral chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 380 mm -Passage: Ø 115 mm -Holder: M230 x 4 / cone 125 - 147 mm -Weight: 92kg

TORNOS MICRO-8 CNC turning centre built in 2008 in Switzerland is distinguished by its extensive machining capabilities, sturdy design made of the highest quality cast iron and compact size. The machine designed for ultra-precise machining of workpieces with a maximum diameter of 10 mm is equipped with two reliable spindles to maximise production efficiency in any production facility, even during the most demanding challenges. The main spindle and counter spindle with integrated thermal control, retractable collet and ceramic ball bearing run on guides with increased rigidity. Both spindles are powered by reliable FANUC motors, ensuring that the necessary power is supplied for the versatile use of all the cutting tools located in the 20-position linear magazine. The arrangement of the tools in the magazine has been made in such a way as to allow simultaneous machining on the main spin ...

Suitable for automatic grinding of tooth faces and tooth backs on carbide-tipped circular saw blades., Accessories:, Total enclosure including coolant system,, Motorized setting of the rake and clearance angle,, Preselection of the direction of rotation of the grinding wheel and automatic change of direction of rotation,, Grinding speed and grinding path stepless adjustable,, Operating system modified Windows version,, Storage of approx. 4,000 programs possible,, Standard software package for tooth geometries according to the program overview,, Program for grinding saw blades with group teeth, with different tooth geometries,, Program for newly fitted and broken teeth,, Software package for multi-surface machining on the positive chip and flank face,, oscillating grinding on the face and top,, Automatic grinding wheel compensation,, Automatic central lubrication,, Feed pawl 2 mm,, 1 sawb ...

The machine is a group of two machines on the same bed. The main difference between them are the travel on Y axis. There are a fixed table and a rotary table in the front of them. The rotary table is used only by one of the machine. Boring spindle diameter 221 mm Boring spindle taper ISO 60 Headstock section 1145 x 860 mm Power of main drive motor 100 Kw Gearbox steps 2 Main spindle speed 2,7-600 rpm Column horizontal travel (X axis) (machine 1) 18000 mm Column horizontal travel (X axis) (machine 2) 22500 mm Headstock vertical travel (Y axis) (machine 1) 5000 mm Headstock vertical travel (Y axis) (machine 2) 6000 mm Headstock horizontal travel ( W axis) 1500 mm Boring spindle travel (Z axi ...

The machine is a group of two machines on the same bed. The main difference between them are the travel on Y axis. There are a fixed table and a rotary table in the front of them. The rotary table is used only by one of the machine. Boring spindle diameter 221 mm Boring spindle taper ISO 60 Headstock section 1145 x 860 mm Power of main drive motor 100 Kw Gearbox steps 2 Main spindle speed 2,7-600 rpm Column horizontal travel (X axis) (machine 1) 18000 mm Column horizontal travel (X axis) (machine 2) 22500 mm Headstock vertical travel (Y axis) (machine 1) 5000 mm Headstock vertical travel (Y axis) (machine 2) 6000 mm Headstock horizontal travel ( W axis) 1500 mm Boring spindle travel (Z axis) 1500 mm 5 CNC axes – Siemens 840D Able to work with face plate (U axis) (machi ...

Machine in good technical condition, possibility of testing after agreement. In 2015, GO spindles took place. In October 2023, the tool magazine motor was replaced. In 2011, a license for the DXF software option was purchased - import for iTNC. Motorcycle watches. power on time : 57676. Heidenhain iTNC53O control system. Technical data: Longitudinal clearance (X): 2 x 750 mm Cross travel (Y): 500 mm Vertical travel (Z): 600 mm Table-spindle face distance: 180 - 780 mm Machine table: Table clamping surface: 1000 x 500 mm T grooves 3 pieces (middle groove H7): 14 H9 mm Table load. 800 kg/m2 (with uniform surface load of the table) Feeds: Max. sliding force: 9000N Rapid traverse in X/Y/Z: 25/25/20 m/min Feed in all axes: 1 – 9999 mm/min Main drive-spindle: Main drive AC motor with hollow shaft 40% ED: 40 kW Speed ​​range - stepless: 30-6000 rpm. Spindle torque 4 ...

PUMA TT1800SY Upper Driven Head with Y Axis, Lower Driven Head, Dual Spindles. FANUC 31i-B control system. Max. circulating diameter above the bed 300mm. Max. circulating diameter above support 230mm. Max. turning diameter above bed with upper head 230mm. Max. turning diameter above bed with lower head 230mm. Max. turning length 600mm. Max. distance between the face of the right and the face of the left spindle 980mm. Milling range outside the turning axis using the Y axis mm 100 (+/- 50). Max. diameter of turned bar (left spindle) 65mm. Max. diameter of turned bar (right spindle) 65mm. Max. permissible weight of the workpiece without the use of a counterspindle (including the weight of the chuck = 23 kg) 12 kg. Total weight 7800kg. Accessories: Feeder SS 2500, length 200-1525mm. Standard accessories. The machine is in good technical condition, it is necessary to seal the upper machining ...

turning diameter: ca. 850 mm turning length: 6000 mm control: Heidenhain 620 centre distance: 6000 mm swing diameter over bed slide: 1250 mm swing diameter max. over cross slide: 850 mm radial face slide adjustment: 680 mm spindle bore: 130 mm main drive AC:: spindle capacity 100% / 60% ED: 37 / 52 kW max. torque: ca. 9000 Nm turning speed range: 5 - 710 U/min feed motor AC:: rapid traverse X-axis: 6 m/min rapid travel Y-axis: 3 m/min tailstock:: diameter of quill: 160 mm quill stroke: 315 mm quill holder (inner taper): MK 6 steady, closed: passage: 450 mm total power requirement: 52 kW weight of the machine ca.: 16,5 t Overall size: 9000 x 2200 x 2300 mm dimensions of the machine ca.: 12 x 4 x 2 m Equipment/accessories: - face plate diameter 1200 mm - various fixators - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Rotation diameter over bed 500 mm, over face slide285 mm, in the bed recess 540 mm, length of bed recess 165 mm, permissible workpiece weight with 2 set pieces 800 kg, speed range 11.2 to 2240 rpm, feed length 0.063 to 56 mm, flat 0.0315 to 28 mm, working stroke face slide 345 mm, top slide 125 mm, tailstock quill 190 mm, centre height over flat track 240 mm, bed width 360 mm, digital readout HEIDENHAIN, turning length 1000 mm weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,600 x 1,700 mm

Description: Center width: approx. 500 mm Diameter over bed: approx. 330 mm Diameter above support: approx. 160 mm Through-hole: approx. 40 mm diameter Speed range: 34 - 1500 rpm With accessories as shown in the pictures, including various three-jaw chucks and four-jaw chucks and 2 face plates Diameter of the face plates: approx. 300 mm Example diameter of three-jaw chuck: approx. 205 mm Example diameter of four-jaw chuck: approx. 255 mm With various steady rests and other accessories as shown in the pictures Dimensions of the lathe: approx. 1550 x 1000 x 1400 mm weight approx.: 1,400 kg, Approx. Onsite Dimension. (l x w x h): 2,750 x 1,000 x 1,400 mm

turning diameter: 325 mm turning length: 532 mm control: FANUC 0i-TD swing over bed: 500 mm spindle turning speed range: 3500 U/min bar capacity: 65 mm travel -x axis: 195 mm travel -z axis: 660 mm spindle drive: 15/11 kW rapid travel - longitudinal/face: 30/30 m/min tailstock quill diameter: 80 mm tailstock quill stroke: 100 mm tailstock quill taper MT: 4 total power requirement: 30 kVA weight of the machine ca.: 4,7 t dimensions of the machine ca.: 2875 x 1675 x 1720 mm Very good condition, low working hours ! Machine comes from a factory closure. CNC control FANUC 0i-TD C axis 12-pos turret with powered positions (3,7/2,2 kW, 5000 rpm) Internal cooling at 17 bar Tailstock Collet chuck up to 60 mm diameter 3-jaw chuck, diameter 250 mm 2 driven tool holders for machining the lateral surface 2 driven tool holders for machining the end face The data for this ad was created with ...

Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one clamping. All known tooth geometries (flat, alternating, trapezoidal, etc.) can be machined automatically and in one run be sanded. Accessories:, Total enclosure, Sawblade positioning device,, Automatic central lubrication,, Coolant system,, Extractor,, Halogen lamp,, 1 sawblade mounting bolt including magnetic flange., Circular saw blade diameter without robot: 100-840mm, Circular saw blade diameter with robot: 100 - 630mm, Circular Saw Bore Diameter: 10 - 220 mm, Sheet thickness without robots: up to 14 mm, Sheet thickness with robot: up to 5 mm, Tooth pitch: 6 - 120mm, rake angle: -30° to +40°, clearance angle: 5° - 45°, Bevel cut on the back of the tooth: up to 45 °, Bevel cut on the negative tooth face: up to 45 °, Working speed for front and back grinding: up to 12 teeth/ ...

Description: Additional information: Various turning and milling accessories from D'Andrea consisting of various accessories - Basic recording DIN69871-AD+B50 MHD’80.180 (Code 416800105025) = 2 pieces - Basic recording DIN69871-A50 MHD’80.62 (Code 416800105020) = 1 piece - Basic recording DIN69871-AD+B50 MHD’63.150 (Code 416630105028) = 2 pieces - Basic recording DIN69871-AD+B50 MHD’50.120 (Code 416500105028) = 1 piece - Basic recording DIN69871-A50 MHD’63.56 (Code 416630105020) = 1 piece - Basic holder DIN69871-A50 MHD’50.48 (Code 416500105020) = 4 pieces - Roughing machining head, TS 80/80 (Code 455408001400) = 1 piece - Roughing machining head, TS 63/63 (Code 455406301250) = 1 piece - Roughing machining head, TS 50/50 (Code 455305001000) = 1 piece - Centesimal machining head, TRC 80 (code 455018001201) = 1 piece - Extension, PR 80.80 (code 656908000800) = 1 piece - Extensi ...

turning diameter:500 mm turning length:1000 mm control:MANUAL PLUS Grundig total power requirement:24 kVA weight of the machine ca.:2650 kg dimensions of the machine ca.:2500 x 1750 x 1850 mm swing diameter over face slide:290 mm chuck:Ø max. 260 mm cross movement:260 mm spindle head:DIN 55027 Größe 8 spindle bore diameter:70 mm rapid travel - longitudinal/face:8 /6 m/min spindle speeds::8 - 2800 tailstock travel:180 mm tailstock quill taper MT:5 Documents:vorhanden

turning diameter:500 mm turning length:1000 mm control:MANUAL PLUS Grundig total power requirement:24 kVA weight of the machine ca.:2650 kg dimensions of the machine ca.:2500 x 1750 x 1850 mm swing diameter over face slide:290 mm chuck:Ø max. 260 mm cross movement:260 mm spindle head:DIN 55027 Größe 8 spindle bore diameter:70 mm rapid travel - longitudinal/face:8 /6 m/min spindle speeds::8 - 2800 tailstock travel:180 mm tailstock quill taper MT:5

Year of production: 1986 Serial number: 50 166 N and the machine was overhauled in 2003 with modernization of electrical control. The machine was equipped with a new SIEMENS automatic controller and new SIEMENS drives. GENERAL CHARACTERISTICS OF THE MACHINE The basic feature of the machine is a fixed portal, a sliding table. The portal has a height-adjustable crossbar, which is equipped with one or two vertical headstocks in the VFS 160 design. Furthermore, the portal is equipped with one or two side (horizontal) VFS 160 headstocks. These types of headstocks can be fitted with additional spindle heads, up to 4 pieces available. The clamping surface of the machine consists of two connected clamping tables, which after disconnection can be used individually (only one is always functional). Clamping table Dimensions of 1 table 2 2,000 x 4,000 mm Total length of connect ...

1 x David Bridge 15/18\ Dump Extruder with 40\ Face x 20\ die Roller Die. Spare parts available. Screw L/D 5:1, Crammer. Length of Barrel 7ft. Right angle turning unit for product flow. 200HP DC variable speed motor

Pneumatic valve DN 300 Manufacturer: Jaudt Dosiertechnik Maschinenfabrik GmbH Type: Varioschieber FSV Opening width mm: ø 350 Height mm: 130 Max.Working temp. ° C: 80 Operating pressure MPa: 0.6-1.0 maximum operating pressure MPa: 0 Control voltage V: -. Housing: one-piece cast housing in flange version the round face with coarse good Chicane Sealing: slide sheet implementation for with Adjustable stuffing seal Pressure piece from cast aluminium alloy Blade: Stainless steel 1.4301 Slide sheet: eccentric screws galvanized Finish: Stainless steel and aluminum parts blank Grey cast iron housing painted in RAL 9006 Steel parts zinc plated, 10 & #956; m Plate made of aluminium Housing material: Cast aluminium alloy (AlSi 10 mg) shock-proof up to 5 bar Flanschbohrbild: According to DIN 2501 PN 6 Packing material: ARAMIDE (Tmax 280 ° C) Operation: pneu ...

Description Steel holder Multifix type: B Plexiglass Chuck guard Four-jaw Chuck Face plate ø 300 mm Live Fixed bezel Various gears Technical data: Tip height 160 mm Top width 800 mm Spindle bore 36 mm Speeds 24-2800 RPM Recording bayonet 5 (DIN 55022)

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

Euroblock 12 movable block machine offers a very wide production range of concrete products. It can be used as a universal machine as well as special product making machine. This multi-purpose block machine can be used for the production of: Hollow blocks Chimney blocks Hourdy blocks Insulated blocks Garden blocks Solid blocks Curbstones Paving stones with or without face mix Layers separated by plastic foil or by sand. With its standard safety devices, rigid frame construction that allow heavy duty use, and simplicity of design that reduce maintenance to a minimum, this machine is the most economical choice for a very wide range of concrete products manufacturers. Useful area: 1290 x1130 mm (product height 170 ? 250 mm) Useful area: 1290 x900 mm (product height 250 ? 500 mm)

Technical data: Capacities: Height of centres over the flat way: 625 mm Height of centres over the flat floor: 1225 mm Swing over bed: 1250 mm Swing over carriage: 940 mm Diameter of four-jaw chuck: 1250 mm Only range of the chuck min/max: 230/1050 mm Distance between centres: 5000 mm Headstock: Spindle bore: 105 mm Spindle seat: cyl. 105 Diameter of the spindle in the front bearing: 320 mm Number of spindle speeds: 24 Overall range of spindle speeds: 1.6-315 rpm Spindle drive motor rating: 75 kW Maximum torque of the spindle: 63000 NM Carriage: Of the bed width: 1100 mm Length of the saddle: 1320 mm Of the cross slide width: 550 mm Travel of cross slide: 800 mm Travel of tool slide: 600 mm Number of feed Council for each range: 20 Overall range of longitudinal feed Council: 0.18-160 mm / rev Range of longitudinal feed Council at: -high range of spindle speeds:  ...

Design of PRO 1000 concrete products machines put this machine beside most flexible in the world. The most versatile machines in their class, the PRO machine series offers the largest variety of handling and cubing systems available. By upgrade of handling the equipment on the wet and dry line side, the capacity of complete installation can be increased significantly. Double layer products are easily produced with and optional face mix device. Pallet size: 1400 x950 mm Useful area: 1350 x850 mm Paving stones 10x20x6 cm Production capacity in 8h 1355m2 Hollow block 20x20x40 cm Production capacity in 8h 17280 pieces

FEED BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -New, on one side coated, open, 2-ply reinforced, with mounted metal connectors to the endless connect type Aligator RS-62, -Dimensions: length 6500 mm x 400 mm width x thickness 2.4 mm, surface with tunnels and double-sided wedge bar -Tunnel 20 mm high x 330 mm long, distance approx. 500 mm, with 2 wedge bar on the top of the face, edges flush, 6 x 4 mm, green

FARREL BRIDGE 4-ROLL, INCLINED 'Z' CALENDER. 66 inch roll face width, 28 inch diameter. Rolls are current polished to produce matt PVC finish. Independent variable speed DC drive to each roll via solid state, AC to DC converter. Cross axis control on roll 4 (roll 3 fixed). Extensively modified and up-graded controls and drives.

Vertical turret lathe FKD 40 CNC with Y-axis and CNC Rotary milling head (A-axis) Faceplate diameter 4000 mm Turning diameter: 8000 mm Turning height: 3000 mm Slide cross section: 300 mm x 300 mm Stroke: 3000mm X-axis: travel 5000 mm Z axis: travel 2000 mm Y-axis: travel 6000 mm W-axis: stroke 1500 mm C-axis in face plate table A-axis milling head Control: Siemens 840 DSL Tool changers: 60 seats PickUp station: 5 places

Vecoplan injection moulding machine Type: VAZ 160/200 SLF Control: PLC Control built year: 2004 Dimensions and weights Dimensions LxBxH m: 3.5 x 3.75 x 2.34 Machine Weight kg: 19,000 Other Inlet length: 1600 mm inlet width: 2000 mm rotor diameter: 640 mm Double number cutting crowns 48 pieces (80 x 80 mm) rotor speed: 148 UpM screen diameter: 120 mm drive power: 250 kW operating voltage: 400 V frequency: 50 Hz throughput: When face, Precrushed and FE-free material for replacement fuel preparation > 12 t/h at heavy goods with a density of 120 kg/m ³ > 5 t/h at lightweight with a density of 80 kg/m ³ with product grain size < 150 mm more than 98% < 30 mm less than 5%.

Weight: approx.4500 KG mash. No.: 6517991 General/technical data: Vertical CNC machining center in a very good, almost new condition, first-hand with very little operating hours. Travel: X= 670 Y=450 Z=470 mm Rapid response: in X and Y = 24m/min, in Z =20m/min Spindle motor: 10 KW Spindle speed: from 50 to 4,500 rpm Spindle cone: SK 40 Control: Siemens 810 M GA 2 Dimensions clamping table: 900 x 420mm max table load: 300 kg Distance spindle head to top of the table: 630mm spindle center to stand face: 470mm Tool slots in the magazine: 24 pieces DIN ISO 40 max. tool diameter: 110mm to 125mm tool length 100mm to 280mm tool length Beuvvquh2i Dimensions of the machine approx.: 2200 x 3000 x 2950 mm (without operator, service and chip conveyor environment) Accessories/ Optional equipment: â?¢ external coolant system with 2 pumps â?¢ Chip conveyor with ...

Labelling machine Neri model SL400 VTE Labelling machine for the application of self-adhesive labels on rectangular shaped objects. - construction in stainless steel and anodized aluminium; - transport of objects on a variable speed belt; - spacer unit - label riveting unit - automatic unwinding unit - variable speed label output up to 30 mt. /min; - the machine is equipped with all safety devices; - electrical system according to CEi standards; The basic machine is the SL 400 TE labeller for the application of 2 safety labels (Tamper Evident). An additional head is installed on the machine for the application of a third label on the upper face of the product. TECHNICAL DATA Supply voltage: 220/380 V. 50 Hz (415 V on request). Installed power: 3. 5 Kw Overall dimensions: mm 1960 x 1350 Height from ground: mm 1900 Net weight: Kg 500 Case size: min. 63 x 20 mm ...

1 RAMISCH laboratory 4-roll calander type RK 46P, face roller width 300 mm, working width 250 mm, calander indicated for following processes: rolling, glaze, friction, mate, Schreiner and embossing,  4 rollers with the following distribution (top to bottom):  steel diameter 120 mm, cotton diameter 240 mm, cotton diameter 240 mm, steel diameter 120 mm, both the steel rollers are electrically heated, linear speed adjustable up to 20 m/min., pressure adjustable up to 195 N/mm = 6 tons, unwinding from roller max. 300 mm diameter, winding to roller max. 300 mm diameter, double fabric spreader, central lubrication system to the 8 roller plain bearings, all rollers are connected through tooth wheels, friction possible and adjustable between 0 and 200%, weight of the machine 2300 Kg, dimensions width 1780 mm, depth 1250 mm, height 1600 mm